I need a password to reset my Time Machine but I cannot find one. How do I get the TM working again.

I changed the location of my TM (and my modem)  My back up has repeatedly said "backup failed". Trying to exit from my asigned disk and re-boot required a password. I have tried many that I have used but w.o. success.  Where do I go from here?

Full factory reset. You don't need to do it via software.. you do it on the TC.. no password required.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
A factory reset is always required when you move network gear around.
Just to repeat.. your backups are fine.. so you can still reconnect to them.

Similar Messages

  • I have been using Voice memos for some time but now I get a message to say No Microphone Available how do I get the function working again?

    I have been using Voice memos for some time but now I get a message to say No Microphone Available how do I get the function working again?

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I cannot get the edge dection tool to work i use to use it all the time but now i can't, how do i get it to work?

    I use to use the edge detection tool all the time but now I can't, how do I get it to work again.  When I try to use it, it will show the o with the line in side.

    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I need to restore my music via time machine but it will not as my mac mini says I don't have permission access iTunes. Any help would be great. Thanks

    I need to restore my music via time machine but it will not as my mac mini says I don't have permission access iTunes. Any help would be great. Thanks

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

    I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

    Do not worry about it.
    Time Machine needs that your external drive is formatted in HFS+, or better known as "Mac OS Extended (Journaled)". This filesystem is used by Apple on Macs and Windows cannot read or write drives formatted with this filesystem, being this the reason why all your devices do not read the external drive except your Mac.
    You can only use your external drive to make Time Machine drives. If you store anything different, you may damage the Time Machine structure, so it is better not to use it as a drive to store other data. Instead, get another external drive to do it or create a second partition on the external drive formatted in FAT32 by using Disk Utility > http://pondini.org/OSX/DU3.html FAT32 can be read by Windows PCs

  • My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it via internet the first time december 2013?)

    My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)

    Did you download the Basic/Free version?
    I also thought the Trial period was as long as you needed!?
    What is your Warranty and Return Policy?
    You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
    All sales are final and there are no refunds.
    Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
    http://www.hamrick.com/sup.html#q

  • My iphone 4s has the connect to itunes screen. I have tried to reset, recover, etc but I keep getting and error-51 message. Any ideas how I can get my phone working again? I am not worried about saving any info just having a phone to use!

    I was in the middle of the iOS 8 update and tried to turn my phone off (yes, I realize this was dumb) But what happened was it tried to reset. Now,  my iphone 4s has the connect to itunes screen. I have tried to reset, recover, etc but I keep getting and error -51 message. Any ideas how I can get my phone working again? I am not worried about saving any info just having a phone to use!

    Try a Hard Reset.....
    Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds.  Ignore the swipe to turn off message.

  • HT3887 my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

    my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

    I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure  if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck

  • After updating my MacBook Pro to yeosemite I want my old screen saver picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this

    After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".

    Can you browse the Time Machine drive from Finder?
    If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background'

  • This week, Apple advertised AmpliTube Fender in Time Magazine, but I cannot find it in the Apple App Store.  Does it exist?

    This week, Apple advertised AmpliTube Fender in Time Magazine, but I cannot find it in the Apple App Store.  Does it exist?

    See here for more info... AmpiTube Fender for iPhone
    tt2

  • I bought Lightroom 5 separately but when I try to install it I am told I need another number. I think I just bought an upgrade version. How do I get the original?

    I bought Lightroom 5 separately but when I try to install it I am told I need another number. I think I just bought an upgrade version. How do I get the original?

    Thanks for no help... but for anyone else, turn off itunes match on the ipod

  • I have an old MAC using OS 10.5 (does not have Intel processor). I need a new printer, but i cannot find one that will work with such an old operating system. Is there a new printer that will work with this old system?

    I have an old IMAC using 10.5, and it cannot use any newer operating system. I need a new printer, but I cannot find one that is compatible with this old system.
    Is there a new printer out there that will work with 10.5?
    Thanks,
    Niles Stroh

    Canon Pixma iP4950 works great with my PPC G5 iMac on Leopard. Maybe other of their models do as well.

  • I have a 500 gb hard drive partitioned for files and time machine but when i connect it to my mac only the time machine one shows up

    well as the title says i have a 500gb hard drive with 2 partitions one with time machine and one for files it worked perefectly until yesterday only the time machine partition appeared in finder, i checked disk utility and both partitions appeared but the one for files appeared in grey and when i press mount an error comes up.

    The repair shop likely replaced a major circuit board on your MacBook Pro, so Time Machine thinks that you have a "new" computer and it wants to make a new complete backup of your Mac.
    You are going to have to make a decision to either add another new Time Capsule....or USB drive to your existing Time Capsule....and in effect start over with a new backup of your Mac and then move forward again.
    For "most" users, I think this is probably the best plan because you preserve all your old backups in case you need them at some point, and you start over again with a new Time Capsule so you have plenty of room for years of new backups.
    Or, as you have mentioned, you have the option of erasing the Time Capsule drive and starting all over again. The upside is that you start over and have plenty of room for new backups. The downside is that you lose years of backups.
    Another option....trying to manually delete old backups individually....is tricky business....and very time consuming. To get an idea of what is involved here, study this FAQ by Pondini, our resident Time Capsule and Time Machine expert on the Community Support area. In particular, study the pink box.
    http://web.me.com/pondini/Time_Machine/12.html
    Once you look through this, I think you may agree that this type of surgery is not for the faint of heart.  I would suggest that you consider this only if one of the other options just cannot work for you.

  • Every time I change password access control to allow access, it reverts after saving. How do I get the saved change to "take"?

    Outlook keeps asking me to either use the login keychain or to use confidential information connected with my email password. I went into the keychain passwords in KeyChain Access, changed the access control on each of them to allow Outlook access. I saved the changes, but then they all reverted to their previous setting.
    There is an older Keychain Access file in the Control Panel that will not open because it's either "damaged or corrupted". If I delete that, would it make a difference? What can I do to keep my access control changes when they won't stay saved?

    I do not have the disc to reload
    Why not?  You need your system dvds to troubleshoot & to reset/change passwords in view of your current OS listed in your  profile. 
    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource:  International Support Phone #s.
    ===============
    I have to have the password, which I cannot remember or find.
    When selecting passwords, make sure it's one that you will NEVER forget AND no one else can figure out. 
    Old school--- > Print it out & keep in a safe place.  A place that ONLY you know about AND never forget.
    New school---> Get a password manager utility.  Highly recommend 1Password which is shareware.  Do a Google search for free password managers.

  • I need to restore iphoto library from time machine, but have a question

    I need to rebuild my library but already have 5 libraries which are taking too much space on my HD to finish a complete rebuild. Is it safe to move those 5 libraries to the trash and restore the one from time machine???
    thanks in advance,
    Kari

    IF nothing goes wrong - hardware - software - human - then you will be fine
    Personally my photos are important to me and I'd purchase an external harddrive and backup everything to it first - then do the deletes/rebuild etc
    Then I would continue using the new EHD for a second backup using a clone package (Carbon Copy Cloner or SUperDuper)
    LN

Maybe you are looking for