I need a program

ok i know that this may seem a bit different... but anyway here it goes...
i have been in the process of making a paintball playing robot for about a year now, it is in the final stages but the only thing i need is a way to control it out on the field, now it has a bluetooth transmitter and reciver on it and that is what i would like to use considering that it has been setup that way from the beggining. i have a program on my computer made in visual basic (the free edition) its just a basic program which outputs numbers 0-9 to the robot to control various functions. i have looked at java for about a month now trying to make a program for it and i give up. what i need is a program which will send the numbers 0 - 9 (the number keys) to the reciver. the baud rate is 9600, databits 8, and the address of the bot is 00:0C:84:00:3E:AF Im just looking for a bare bones program for this, it does not need any security or anything. my phone is a Sony Ericsson Z520 with the mobile version of java on it. if i cant get this done it will be what brings down the entire project. if you need any more info just ask, and thanks in advance!.

Hi,
As far as I know, Sony Ericsson Z520, like a lot of the other cell phones, doesn�t support bluetooth serial communication.
See:
http://developer.sonyericsson.com/entry.jspa?externalID=138&categoryID=5
BUT(!) You should double check this information.
If you ask me, we have done similar project.
We are working on hobby project � our robot use J2ME cell phone as on-board brain.
And there is connection between this small robot and Linux-based PC.
Communication was done via BlueTooth (in reality we use Linux implementation of BlueTooth stack and obexftp).
BUT (!) We use Siemens S75 for this communication.
I�m afraid that Siemens is the only manufacture, which implemented serial communication over bluetooth, embedded camera and non-usb socket.
Also there are some Motorola phones, which implement serial communication over bluetooth.
But � note that all Motorola phones use USB sockets and it will not be easy for you to make connection between such a phone and the robot.
If you need just connection between cell phone and PC, then may be USB is OK too.
Our robot project: www.RoboHobby.com

Similar Messages

Need standrad program for vendor aging report

Hi
Need standrad program for vendor aging report.
Please reply me only standrad programs.
Point are sure.
Regards,
kumar

Hi Pankaj
sorry to say that this is not my required program.
I need vendor aging report like s_alr_87012178 tc leads to customer aging report.
Thanks for your effort.
points are awarded.
Regards,
kumar

I just purchased a MacBookPro after having a MacBook. I have ILife, IWorks and Office for Mac. How do I get those programs on to my MacBook Pro? I will still use my MacBook at work so I need those programs to remain on it as well.

I just purchased a MacBookPro after having a MacBook. I have ILife, IWorks and Office for Mac. How do I get those programs on to my MacBook Pro? I will still use my MacBook at work so I need those programs to remain on it as well.

You need a Firewire cable to run between the two Macs. Using Utility>Migration Assistant running on your new MacBook Pro, transfer what you want (with all the preferences and such) from your MacBook to your MBP. Here's more info from Apple.
You might have an issue with the Serial number for Office, but hopefully you have that around.
Hope this helps.

Need a program which finds out if a user has not logged for 3 days?

HI,
   I NEED A PROGRAM WHICH FINDS OUT IF ANY USER HAS NOT LOGGED FOR THREE DAYS
    AND SEND A MAIL TO THE BASIS TEAM.IT SHOULD BE SHEDULED AS A BACKGROUND PROCESS.
I SEARCHED IN GOOGLE BUT NOT ABLE TO FIND IT.
PLEASE HELP ME OUT WITH THIS.
                REGARDS,
                      MANI

use table USR02 and analyse field field TRDAT
X = sy-datum - usr02-trdat.
-> if x ge 3...
for mail use e.g. fm SO_NEW_DOCUMENT_ATT_SEND_API1
hope that helps
Andreas from germany

I'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

i'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

There isn't a way directly in Mail.
Here's what google says: http://www.google.com/search?client=safari&rls=en&q=mac+os+x+mail+delayed+send&i e=UTF-8&oe=UTF-8

Need a program for Y/Z report (extended report ) in START_REPORT

Hi,
Am trying to execute a Y transaction (report ) which is called by start_report transaction. Pls find the details below.
D_SREPOVARI-REPORTTYPE= RE
D_SREPOVARI-REPORT=
D_SREPOVARI-EXTDREPORT= KP 01RPSCO_X                       Z12KST1D4
I want to execute this by using SUBMIT statement, for that need a program name of Y report . Let me know the prog name / How to execute this type of reports ?
Thanks in advance.
Best regards,
Shasidhar.C

Hi ,
Am trying to execute a Y/S transaction ( extended reports S_ALR_87013559 / S_ALR_87013557 / Y_DVE_38000074 / Y_DVE_38000044 ) in a custom report. The transactions are related to budget/cost/planing reports in PS module. In se 93, that is called by START_REPORT transaction with the below mentioned details.
D_SREPOVARI-REPORTTYPE= RE                                                             "report type
D_SREPOVARI-REPORT=
D_SREPOVARI-EXTDREPORT= KP 01RPSCO_X            Z12KST1D4         "extended report
The Y/S transaction program is varying from client to client. We are using ECC6.0 version.
Thanks & Regards,
Shasidhar.C

I need a program to send a mail when sap starts

I need a program to send a mail (external mail) each time sap start or something similar.
Does anybody know something about this ?
Thank you .

Hi,
this is not a perfect answer, but it may help you,
In SM04 transaction code, you will know which user is loged to SAP and which transaction is using, there we have a option to send the mails also
have a look at it, and try to solve your problem
Regards
Sudheer

I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator. Not sure how to use Labview to control the PLL.

I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator. Not sure how to use Labview to control the PLL.

Here is how to use the PLL. But I don't know of how to interact with that device
http://zone.ni.com/devzone/cda/tut/p/id/3781
And for thouse who don't know what a PLL is a free bonus link is here:
http://digital.ni.com/public.nsf/allkb/07BC8D77D4E9AE258625708B007CE74F?OpenDocument
and a second one on what that device is: http://www.hittite.com/products/view.html/view/HMC702LP6CE
Now we are all caught up to speed.
Sam S
Applications Engineer
National Instruments

I need a program that can tell me the amount of bandwidth used by each host

Dear Friends
I need a program that can tell me the amount of bandwidth used by each host on the network in kb/s or mb/s.
And if possible which would also records a history of use,
what is the best program for this?
Thanks
Almir

Hello friend,
you can solve your problem with a netflow technology.NetFlow exports packets
with information about your data flows going throught your routers or switches.
(Usually src/dst IP address, src/dst ports, protocols, src/dst interfaces, num
of bytes, num of packets). In the analyzator software you can see exactly what
you need. See: http://www.cisco.com/go/netflow for more information about netflow.
NetFlow is NOT supported on all devices, but almost devices support it. The list of
supported devices can be found on the: http://support.caligare.com/kb/entry/42/
Our company is developing netflow analyzer (it is the second part of netflow analysis).
So if you want to know more, contact me at any time. Of course, you can use any other
netflow analyzers, there are many tool available .... free/commercial... the list of applications:
http://netflow.caligare.com/applications.htm
Please, rate if I helped you.
Kind regards,
Jan

I need a program to view and edit .mpg

I need a program to veiw and edit .mpg on my IMAC.

What kind of 'mpg'? From what source?
What mac do you have and what version of OS X?

I need a program that I can download home videos and burn to a dvd

I need a program that I can download home videos and burn to a dvd to watch on TV.

I don't know what you mean by "download home video" but there are several DVD burner apps in the MAS. Just search burn DVD and you'll see them.

I need a program to create a website. Is there iweb? Thank you

I need a program to create a website. Is there iweb? Thank you Beautiful

iWeb has been discontinued by Apple for nearly 2 years. You would be best served to try one of the apps that have been discussed in these forums as "iWeb alternative" or "iWeb replacement". Just search this forum for those two phrases to get a list of discussions.
One app that many have migrated to is EverWeb because is if very much like iWeb in it's user interface and operations. It is much more advanced than iWeb ever was. It has a 30 day demo version you can try before purchasing.
Most of the other apps discussed as alternatives or replacements also have demo versions available.

Need sample programs for inbound & outbound interfaces in abap hr?

hi friends
i need sample programs for inbound & outbound interface programs in hr abap . any one send me pls
thanks & regards
deepurd

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
*& Report ZPROG65_11 *
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
REPORT zprog65_11 .
TABLES : lfa1.
TYPES : BEGIN OF ven ,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs ,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
spars LIKE lfa1-spras,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
anred LIKE lfa1-anred ,
END OF ven .
DATA : t_ven TYPE TABLE OF ven WITH HEADER LINE ,
t_bdc LIKE TABLE OF bdcdata WITH HEADER LINE .
DATA : v_file TYPE string ,
v_temp TYPE i ,
v_lifnr(10) TYPE n,
v_hdate LIKE sy-datum.
DATA : c_tcode LIKE sy-tcode .u201Dvalue u2018XK01u2032.
PARAMETERS : p_file(30) DEFAULT u2018c:\vendor1_11.txtu2019,
p_group LIKE apqi-groupid.
START-OF-SELECTION .
MOVE p_file TO v_file .
PERFORM file_upload TABLES t_ven USING v_file .
v_hdate = sy-datum - 1.
CALL FUNCTION u2018BDC_OPEN_GROUPu2019
EXPORTING
client = sy-mandt
DEST = FILLER8
group = p_group
holddate = v_hdate
keep = u2018Xu2019
user = sy-uname
IMPORTING
QID =
EXCEPTIONS
client_invalid = 1
destination_invalid = 2
group_invalid = 3
OTHERS = 11
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT t_ven .
clear lfa1.
v_temp = 0.
MOVE t_ven-lifnr TO v_lifnr.
SELECT SINGLE * FROM lfa1 INTO lfa1 WHERE lifnr =
v_lifnr.
IF sy-subrc = 0.
WRITE :/ u2018foundu2019.
v_temp = 1.
else.
write: / u2018not foundu2019.
ENDIF.
IF v_temp = 0.
c_tcode = u2018xk01u2032.
PERFORM fill_ddc_table .
ELSEIF v_temp = 1.
c_tcode = u2018xk02u2032.
PERFORM fill_bdc_table .
ENDIF.
CALL FUNCTION u2018BDC_INSERTu2019
EXPORTING
tcode = c_tcode
TABLES
dynprotab = t_bdc
EXCEPTIONS
internal_error = 1
OTHERS = 7.
REFRESH t_bdc .
ENDLOOP .
CALL FUNCTION u2018BDC_CLOSE_GROUPu2019
EXCEPTIONS
not_open = 1
queue_error = 2
OTHERS = 3.
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
*& Form file_upload
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
u2013>P_T_VEN text
u2013>P_V_FILE text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
FORM file_upload TABLES p_tven STRUCTURE t_ven
USING p_vfile.
CALL FUNCTION u2018GUI_UPLOADu2019
EXPORTING
filename = p_vfile
filetype = u2018ASCu2019
has_field_separator = u2018Xu2019
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = p_tven
EXCEPTIONS
file_open_error = 1
file_read_error = 2
OTHERS = 17
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. u201D file_upload
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
*& Form FILL_DDC_TABLE
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
u2013> p1 text
<u2013 p2 text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
FORM fill_ddc_table .
SCREN 100
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180100u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-LIFNRu2019.
t_bdc-fval = t_ven-lifnr .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-BUKRSu2019.
t_bdc-fval = t_ven-bukrs.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-EKORGu2019.
t_bdc-fval = t_ven-ekorg.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-KTOKKu2019.
t_bdc-fval = t_ven-ktokk.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
110
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180110u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-NAME1u2032.
t_bdc-fval = t_ven-name1 .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-SORTLu2019.
t_bdc-fval = t_ven-sortl.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-LAND1u2032.
t_bdc-fval = t_ven-land1.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-SPRASu2019.
t_bdc-fval = t_ven-spars.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
120
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180120u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
130
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180130u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018=ENTRu2019.
APPEND t_bdc. CLEAR t_bdc.
210
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180210u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFB1-AKONTu2019.
t_bdc-fval = t_ven-akont .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFB1-FDGRVu2019.
t_bdc-fval = t_ven-fdgrv.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
215
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180215u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
220
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180220u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
310
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180310u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFM1-WAERSu2019.
t_bdc-fval = t_ven-waers .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
320
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180320u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018=UPDAu2019.
APPEND t_bdc. CLEAR t_bdc.
ENDFORM. u201CFILL_DDC_TABLE
u201D FILL_DDC_TABLE
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
*& Form FILL_BDC_TABLE
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
u2013> p1 text
<u2013 p2 text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
FORM fill_bdc_table .
SCREN 101
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180101u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-LIFNRu2019.
t_bdc-fval = t_ven-lifnr .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-BUKRSu2019.
t_bdc-fval = t_ven-bukrs.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-EKORGu2019.
t_bdc-fval = t_ven-ekorg.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
110
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180110u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018lfa1-anredu2019.
t_bdc-fval = t_ven-anred .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-NAME1u2032.
t_bdc-fval = t_ven-name1 .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-SORTLu2019.
t_bdc-fval = t_ven-sortl.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-LAND1u2032.
t_bdc-fval = t_ven-land1.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-SPRASu2019.
t_bdc-fval = t_ven-spars.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
300
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180300u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018=YESu2019.
APPEND t_bdc. CLEAR t_bdc.
ENDFORM. u201D FILL_BDC_TABLE
Best Regards

Need sample program OO abap alv using hotspot( interactive report)

need sample program on Object Oriented program using alv interactive report.

*& Report Z8VM_N_PO_PRICING_CONDITION *
REPORT Z8VM_N_PO_PRICING_CONDITION NO STANDARD PAGE HEADING
MESSAGE-ID Z8VM.
vivekanand meghmala
trial assignment
po with pricing condition interactive report with checkbox
data declaration
TYPES : BEGIN OF STRUCT_EKKO, "po header
BUKRS LIKE T001-BUKRS,
EBELN LIKE EKKO-EBELN,
BSART LIKE EKKO-BSART,
BEDAT LIKE EKKO-BEDAT,
EKORG LIKE EKKO-EKORG,
WAERS LIKE EKKO-WAERS,
LIFNR LIKE EKKO-LIFNR,
KNUMV LIKE EKKO-KNUMV,
END OF STRUCT_EKKO.
TYPES : BEGIN OF STRUCT_EKPO, "po details
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
END OF STRUCT_EKPO.
TYPES : BEGIN OF STRUCT_KONV,
KNUMV LIKE KONV-KNUMV,
KPOSN LIKE KONV-KPOSN,
KSCHL LIKE KONV-KSCHL,
KAWRT LIKE KONV-KAWRT,
KBETR LIKE KONV-KBETR,
END OF STRUCT_KONV.
DATA : IT_EKKO TYPE STANDARD TABLE OF STRUCT_EKKO WITH HEADER LINE.
DATA : IT_EKPO TYPE STANDARD TABLE OF STRUCT_EKPO WITH HEADER LINE.
DATA : IT_KONV TYPE STANDARD TABLE OF STRUCT_KONV WITH HEADER LINE.
PARAMETERS : T_BUKRS LIKE EKKO-BUKRS .
SELECT-OPTIONS : S_BEDAT FOR IT_EKKO-BEDAT.
SELECT-OPTIONS : S_EKORG FOR IT_EKKO-EKORG.
validations
AT SELECTION-SCREEN.
IF T_BUKRS = ' '.
MESSAGE E009.
ENDIF.
SELECT BUKRS FROM T001
INTO CORRESPONDING FIELDS OF IT_EKKO
WHERE BUKRS = T_BUKRS.
EXIT.
ENDSELECT.
IF SY-SUBRC 0.
MESSAGE E001.
ENDIF.
logic
START-OF-SELECTION.
SELECT BUKRS
EBELN
BSART
BEDAT
EKORG
WAERS
LIFNR
KNUMV FROM EKKO INTO CORRESPONDING FIELDS OF TABLE IT_EKKO
WHERE BUKRS = T_BUKRS
AND BEDAT IN S_BEDAT
AND EKORG IN S_EKORG.
SELECT EBELN
EBELP
MATNR FROM EKPO INTO CORRESPONDING FIELDS OF IT_EKPO
FOR ALL ENTRIES IN IT_EKKO WHERE EBELN = IT_EKKO-EBELN.
APPEND IT_EKPO.
ENDSELECT.
LOOP AT IT_EKPO.
SELECT KNUMV
KPOSN
KSCHL
KAWRT
KBETR FROM KONV INTO CORRESPONDING FIELDS OF IT_KONV
WHERE KPOSN = IT_EKPO-EBELP.
APPEND IT_KONV.
ENDSELECT.
ENDLOOP.
*data printing
LOOP AT IT_EKKO.
WRITE :/ IT_EKKO-BUKRS,IT_EKKO-EBELN,IT_EKKO-BSART,IT_EKKO-BEDAT,
IT_EKKO-EKORG,IT_EKKO-WAERS,IT_EKKO-LIFNR,IT_EKKO-KNUMV.
LOOP AT IT_EKPO WHERE EBELN = IT_EKKO-EBELN.
WRITE :/ IT_EKPO-EBELP,IT_EKPO-MATNR.
LOOP AT IT_KONV.
WHERE KPOSN = IT_EKPO-EBELN.
WRITE :/ IT_KONV-KNUMV COLOR 3,IT_KONV-KPOSN COLOR 3,IT_KONV-KSCHL COLOR 3,IT_KONV-KAWRT COLOR 3,IT_KONV-KBETR COLOR 3.
ENDLOOP.
ENDLOOP.
ENDLOOP.[/code]
thanks
reward if helpful

Do we need unique program ids for different SAP Channels

Hi All,
I am using different channels for receiving SalesOrder and Invoice idocs from SAP system. Wanted to confirm if we need unique program ids for each SAP channel or a single program id can be configured in SAP GUI to receive both idocs. I am using SOA 11g.
Regards
Subhankar

Unique program id for each type of IDOC is preferred per each channel
IDOC Type 1->Programid1->Channel1
IDOC Type 2->Programid2->Channel2
Manoj

Hi, I need the program of access from the office, so i'm going to but the Microsoft office 365 university, will i have to but any other program to use the access from my mac? or to open any database that I will have did from any other computer (not mac)?

hi, I need the program of access from the office, so i'm going to but the Microsoft office 365 university, will i have to but any other program to use the access from my mac? or to open any database that I will have did from any other computer (not mac)?

There has never been a Mac version of Access. Microsoft never created one, realising that it was very inferior to the FileMaker Pro database application.
So if you must run Access you will have to run Windows on your mac.

I need a program

Similar Messages

Maybe you are looking for