I need a step motor and controller compatible with LabView Can you recommend any

I need a step motor compatible with LabView and I thought i would check with you before i moved forward in my experiment

Dear chapbs,
I've attached a sample cart below to show you the components for a possible setup of your system. Keep in mind that whatever stepper drive you purchased would power your motor. If you go ahead with the purchase of a controller & drive, I would highly recommend contacting NI to insure that you purchased the correct accessory components and cables to connect & power the components. I hope the  sample cart is helpful. I created it  by browsing ni.com, adding items to my cart, and then saving the cart to an excel file. Please post back if you have additional questions.
Best Regards,
~NH
Attachments:
SampleCart.pdf ‏145 KB

Similar Messages

  • Need to use Photoshop/InDesign on a laptop. Can you recommend one?

    I am trying to by a lap top but can't find my way in the djungle. I already have a computer. The lap top is going to be more of a vacation computor, but I need to use Photoshop even during my vacation. I want a small lap top with DVD reader/writer (that isn't the most expensive one).
    Some one out there who is using a lap top for Photoshop use and is satisfied with it?

    One thing to watch out for:  Get a laptop that has an ATI or nVidia display interface.  A lot of laptops come with Intel graphics accelerators and Intel's display drivers (upon which the Adobe software relies heavily) often cause people problems.
    -Noel

  • Can you recommend any games compatible with i phone 3 running IOS 4.2.1 suitable for young kids?

    Just trying to set up an old i phone 3 with some games and struggling to find some that will run on IOS 4.2.1 that are suitable for younger kids.  Any recommendations?

    Considering the age of the phone and the fact that app developers have been discontinuing support for most iOS lower than iOS 5.0, it could be very difficult. I just want to warn you of that as you wait for some answers here. I don't have children that play with a separate device anymore. Both of mine are college age and have their own iPhones, so their taste in games would probably not meet yours!

  • Who know's an unexpensiv​e stepping motor incl. controller​?

    Hi,
    I'd like to realize a stepping-motor project and I'm therefore looking for the hardware necessary. It's logical that I need a motor and a controller. Because I use a Laptop I need an external controller. I would like to control it via RS232 or USB.
    You have to know that I'm a student and therefore don't earn much money and would prefer unexpensive hardware (max. 100€). My investigations about this unfortunately resulted in very expensive hardware.
    I would be very grateful if someone could tell me an unexpensive resource for such hardware including a stepping motor and a controller, which can be easily controlled using LabView 8.2.
    Many thanks in advance for your help,
    Ulrich
    Message Edited by ulrichmayer on 11-25-2007 03:07 PM

    BUMP...
    Problem still persists with newest kernel.

  • Need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any idea

    need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • Recently purchased a used IPad 2 but it still has previous owner's data.  I've been told not to sync it to my computer as it will cause problems.  What do I need to do to make it compatible with accounts on my mac and ipod touch?

    Recently purchased a used IPad 2 but it still has previous owner's data.  I've been told not to sync it to my computer as it will cause problems.  What do I need to do to make it compatible with accounts on my mac and ipod touch?  Thanks for any and all help!

    You can wipe the iPad's contents completely by going to Settings>General>Reset>Erase All Content and Settings. This will remove all of the previous user's apps, data, settings and so on from the iPad and you can set it up as your own.

  • I am purchasing an Imac and used to use Windows Vista.  I have a HP Color Laserjet 2840 and need to know if it's compatible with Mac OSX?  If not, what printer is?

    I need to know what printer is compatible with Mac OS X operating system.  I have a HP Color Laserjet 2840

    Your HP Color Laserjet 2840 is compatible to Mac OS X.
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=de &prodNameId=445197&prodTypeId=18972&prodSeriesId=445194&swLang=18&taskId=135&swE nvOID=4082

  • Are the newer ipod classics (80GB and above) compatible with docks for the older ipod classics (20GB)?)

    are the newer ipod classics (80GB and above) compatible with docks for the older ipod classics (20GB)?)

    I have an iPod Touch 2 with iOS 4.2.1.  This is the highest version that works on this device.  I checked it once and it had to do with iOS 4.3 and above only supporting the higher RAM CPUs on newer devices.
    Apple does make it harder than it needs to be.  There still remain a number of apps available on iTunes that will work but they are hard to find because you must manually look at each app specs to see if the app supports an iOS below 4.3
    App backups are your friend since iTunes has no way to keep older version of apps.

  • Hi, How do I communicate CANopen device with anyother CAN device? What things needs to be made compatible with 2 CAN devices to communicate?

    Hi,
    I have to communicate CANopen device with other CAN device which uses GMLAN. 
    So in general, How do I communicate CANopen device with anyother CAN device?
    What things needs to be made compatible with 2 CAN devices (i.e, one is CANopen and anyother CAN device) to communicate?
    Please reply.
    Thanks,
    Najmu

    Hello,
    The two devices need to be connected with a CAN cable and while carrying out the communication, one device should be the master and the other should be the slave. Also you should maintain the same protocol (Baud rate, Arbitration ID etc.) at the two devices. 
    Regards
    Akshat Jain

  • Are Creative Cloud apps like InDesignCC and PhotoshopCC compatible with same in CS6?

    Are Creative Cloud apps like InDesignCC and PhotoshopCC compatible with same in CS6?

    If you mean the resulting files - no, InDesign CC files will not open in CS6. You need to explicitly save them back to the CS6 format from ID CC with all the sideeffects like potentialyl screwed up formatting. PS is a different matter. As long as PSD files are saved with maximum compatibility they will open up in pretty much any version of PS.
    Mylenium

  • I try to sync my nano and get:  the ipod cant be synced because there is not enough free space to hold all of the items in the items library (need 100MB) - I have a new computer?? can you help me understand this message: what to do?

    I try to sync my nano and get:  the ipod cant be synced because there is not enough free space to hold all of the items in the items library (need 100MB) - I have a new computer?? can you help me understand this message: what to do?

    Hello pryan1012,
    What this message means is that you have more music in your itunes library than there is free space in your ipod.
    I had this same issue at one time. This is what helped me put my music on the ipod. I used manually manage.
    Learn how to sync muisc here.
    Hope this helps.
    ~Julian

  • Is the Microsoft 5MH-00001 Wired Desktop 400 keyboard and mouse compatible with mac mini?

    Hello, is the Microsoft 5MH-00001 Wired Desktop 400 for Business mouse and keyboard compatible with the mac mini computer? I tried using a generic mouse and the lights of the mouse were on, but I could not click or move the mouse around. Then when I plugged in a dell keyboard, it said the "keyboard is not identified". I could press buttons on the keyboard, but they werent being registered by the mac. I also tried changing my mouse's usb to a different port, but still did not work. So I am worried that the microsoft wired mouse + keyboard I ordered might not work on my mac mini. Is there a way to get my old keyboard and mouse to work at least?

    Were these other ones you tried Wired also? If so that's really strange!?
    Did you try rebooting with them connected?
    I see no reason for the Microsoft 5MH-00001 Wired Desktop 400 for Business to not work, but then any wired Generic KB should work!???

  • I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried. Can you help? thank

    I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried.
    Can you help? thank

    revert back to Maverick that is what I had to finally do. This was the worst upgrade I have ever seen. Hopefully you have Time Machine backup and can revert back. It was pretty painless except for a few issues. I will wait until Apple gets their stuff together on this upgrade or may never will.

  • In need of a KEITHLEY 2001 single read .vi that is compatible with LabVIEW 7

    I am updating from LabVIEW 5.1.1 to 7. The KEITHLEY 2001 Single Read .vi has coercion errors, and does not function. Where can I get updated KEITHLEY 2001 .vi's that are compatible with LabVIEW 7?

    You can visit http://ni.com/idnet/, click the "Search Drivers" button
    and select "Keithley" as the manufacturer and hit the "Go" button.
    Look down the list, and you'll find the LabVIEW Certified Plug and
    Play driver for this multimeter scanner.
    I hope this helps.
    Brian

  • Do we need to format data and log files with 64k cluster size for sql server 2012?

    Do we need to format data and log files with 64k cluster size for sql server 2012?
    Does this best practice still applies to sql server 2012 & 2014?

    Yes.  The extent size of SQL Server data files, and the max log block size have not changed with the new versions, so the guidance should remain the same.
    Microsoft SQL Server Storage Engine PM

Maybe you are looking for

  • The 'Content, index, search' section of my help is not working in Mozilla

    Dear All, The 'Content, index, search' section of my help is not working in Mozilla. I am using robo8 and mozilla 8. Any idea? please help... Regards, Jobin.

  • Slide size shrinks by itself

    I have made a dozen or so presentations that I use a lot. I find sometimes that when I open a presentation I haven't used in a while that it has shrunk in size. The most recent one I used said that it was a custom size (720 x 540 I believe). I change

  • Roles in MM

    Hi all, Can someone help me in identifying different roles which can be created for MM reports in BI. I am not able to get it from business here cause they are not sure of these concepts. What i reqiure is if someone can suggest me different roles an

  • Get music on to my itunes collection

    I am trying to get a song,  which i have as a you tube video, on to my itunes collection, the song is not available for purchase on itunes, is there anyway i can do this. thanks M

  • Lot of jumbled text

    Lot of web pages now coming up with text looking jumbled or on top of each other. same page is ok in other browsers. any ideas? thanks