I need basic help with my VISTA laptop. Adobe Reader X (10.1.4) IS INSTALLED BUT NOT WORKING.

A basic questions. My laptop VISTA has Reader X (10.1.4) installed. Internet add ons has Adobe PDF llink helper enabled. I am not able to open PDF files?

Moved to Adobe Reader.
You cannot able to open pdf files on your computer or you cannot open pdf files in your webbrowser? If you cannot open pdfs in your browser, what browser are you using?

Similar Messages

  • I am trying to get help with WMPlayer tech support Adobe Reader cant open wmpsupport.htm files why?

    i am trying to get help with WMPlayer tech support Adobe Reader cant open wmpsupport.htm files why?

    Adobe Reader opens PDF files, nothing else.

  • Why can't I get help from you people? Thunderbird is installed, but not working.

    I carefully followed the directions for installing Thunderbird. I am running WinXP pro. Thunderbird is there but not functioning. I am 78 years old and I need help from you re: install. I am not going to pay $$$$$to get a computer tech to come to my home and install Thunderbird. I had no trouble installing Firefox, but Thunderbird is an absolute drongo. Please call me at xxx-xxx-xxxx or email me a number to call. I need human help. PLEASE! Thunderbird just sits there but gets no mail.
    Regards, Sara

    This appears to be your first post here and you have not provided much detail to work with. This is the Thunderbird support forum. No one is going to call or email you other than the spammers that get your info that you posted in a public forum.

  • I'm a Newb (migrating from Cubase SX 3) need basic help with everything!

    Hello, I'm a Cubase SX 3 user trying to learn Logic and switch. I'm having basic trouble setting everything up and getting started. Such as inputs and main output etc. I'm used to the way its all done in Cubase. Does anyone know of a good quick start tutorial that will get me on my way?
    Thanks much.
    Also, if there are any users familiar with Cubase, perhaps you could explain it to me better.

    Hello Cleveland
    First i have to say , if you have the original box of logic express , you might have the very handy user manual
    If not , there are hundreds of usefull threads in this forum which will help you a lot.
    If not , please be a bit more precisse with your question, cause i think no one will explain you all the functions in Logic available here from scratch .
    Have a great day and be patient while learning by doing
    Daniel
    Dual 1.8 G5   Mac OS X (10.4.7)   http://www.soniccube.ch

  • Need basic help with my new iMac

    Can someone please assist me with these questions?
    When I click on F3 (wireless keyboard), I can see all my windows that are open (I think this feature is called expose?), but it just shows the windows for about a second and then I see my desktop. I'm not able to select the window I want to activate. It used to show me all the windows open and then I could just click on the one I want to activate. I don't know what I did to change this.
    Also, I added some stuff (widgets?) on my dashboard and I don't know how to remove them. How do I do this?
    Thanks in advance for your help.

    It sounds like you have Expose set to "Desktop" rather than "All windows" or "Application windows". Check your settings in System Preferences.... 
    cheers
    mrtotes

  • Cannot save form with Windows Vista and Adobe Reader 8

    I have many forms created with Adobe Livecycle Designer 8. Users who have upgraded to Windows Vista can no longer save these forms. Any ideas?
    thanks.

    I don't have Vista, but in XP I have found deleting the printer driver
    and re-installing sometimes works.
    Mike

  • Help with Error 14 in Adobe Reader

    I have Adobe X and am trying to download pdf files from a tertiary institute. The first page will often download, and then the rest is blank, with an error 14. What can I do about this please? Thanks!

    This possibly means the pdf content is possibly corrupted from that page onwards.

  • Help with windows 8 and adobe reader

    adobe reader wont open pdf file in a browser window how do i fix this in windows 8

    Make sure you only use 32-bit browsers.

  • Flash version 10,1,53,64 installed but not working... please help

    I use Firefox
    I installed the Flash 10 plugin
    I still get an "upgrade your Flash" message when attempting to play games.
    I am not tech savy in the least!
    Can anyone help me?

    First, what is your operating system (Windows, Mac OS, Linux) and version?
    Next go to http://www.adobe.com/software/flash/about/ - can you see the Flash animation, and is there a version listed under it?

  • Need some help with putting a folder in users directory

    I'm not sure how to do this, but what I want to do is put this file in C:/My Documents, but I need to be able to verify that C://My Documents exists, if not put it in C:/Program Files.
    Can any one help me out?
    try {
                        String[] contactArray = parseDatFile(fc.getSelectedFile());
                        Document document = createXMLDocument(contactArray);
                        saveToXMLFile(
                        document,
                        new File(
                        "C:/Program Files/xxx/",// looks for directory for list
                        "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"));
                    } catch (Exception exc) {
                        File f = new File("C:/Program Files/xxx/");// setting directory for list if not there
                        boolean yes = true;
                        yes = f.mkdir();// creating directory
                        try {
                            String[] contactArray = parseDatFile(fc.getSelectedFile());
                            Document document = createXMLDocument(contactArray);
                            saveToXMLFile(
                            document,
                            new File(
                            "C:/Program Files/xxx/",// used only if the directory didn't exist
                            "xxxxxxxxxxxxxxxxxxxxxxx"));

    Need some help with putting a folder in users directoryI recomend using System.getProperty( "user.home" ) not a hard-coded value.
    This will use the users home folder ( C:\My Documents ) on Win9X (I guess), C:\Documents and Settings\<current user> on Win2K +, and ~ on Unix-a-likes.

  • I need your help with buying one of your software programs.

    I need your help with buying one of your software programs.
    First of all I do not want to join this “Creative Cloud” for a monthly plan.
    Adobe Illustrator CS6 is what I am wanting but every time I click on the buy button is keeps sending me to a rent page to use but I don’t want this I want to buy it program for my own use. I don’t want to rent it I want to buy it like all the other Adobe software programs that I have bought from you in the past.
    Can you help with problem?
    Tim Adams
    [email protected]

    You can buy CS6 from this page
    Creative Suite 6

  • Need some help with Flash + Captivate (ActionScript in Flash)

    I have what I think is a fairly simple question.... I have an SWF File embedded in a Captivate 4 Presentation. The SWF requires the user to click on a variety of items, after they have gone through all the required items a "FINISH" button appears... I want the finish button to "close" the SWF file.
    I'll add this info to in case it helps with the "right" answer....
    The reason I am doing this is because Captivate automatically rolls from one "slide" to the next. The only way to stop this is to add a "pause" button to the slide, I want the user to have to finish the SWF before they can see the "next" button in the captivate file...So I was thinking, put the "swf" over the "next" button... then have the "complete" button close the swf revealing the covered "next" button in captivate....
    The short version of what I need is information on closing an SWF file via a button click. Is there a "swf.visible=false" or anything like that?

    Need some help with putting a folder in users directoryI recomend using System.getProperty( "user.home" ) not a hard-coded value.
    This will use the users home folder ( C:\My Documents ) on Win9X (I guess), C:\Documents and Settings\<current user> on Win2K +, and ~ on Unix-a-likes.

  • Need basic Help - SG300 with vlan and routing

    Hi,
    i need some basic help with configuring vlan/routing.
    Situation:
    DSL Router - Cisco 300 - XenServer
    192.168.1.253 - 192.168.1.19 - 192.168.1.10 (mgmt ip)
    goal is, to reach from inside xenserver vms the internet.
    vms = 192.168.2.x
    gateway ip = 192.168.2.1
    what i did:
    - configured vlan 102, tagged, with the xenserver port
    - configured on xenserver a network with vlan id 102, attached to the vm
    - this network is conntected to an external bond
    - configured ipva4 interface: vlan102 - Static - IP 192.168.2.1 (this is the gateway ip of the vms)
    - automatic configured IPv4 Route: 192.168.2.0/24 next hop 0.0.0.0, Directly connected
    So at the moment i cant ping from inside a vm to the DSL Router (192.168.2.2 to 192.168.1.253)
    any ideas what i misconfigured or whats wrong?
    cheers,
    -Marco

    Hi Tom,
    ok, that make sense. I can ping the router now inside vms from 192.168.2.x network.
    But i cant ping external adresses, error: Destination net unreachable.
    My other problem i have, i cant reach any server from outside over router portforwarding.
    How do i have to configure the upload port to the dsl router? Is it a access port or a trunk
    port with all vlans (tagged or untagged?) At the moment ive a tagged Trunkport with all vlans.
    IPv4 Interface Table
    Interface
    IP Address Type
    IP Address
    Mask
    Status
    VLAN 1
    Static
    192.168.1.19
    255.255.255.0
    Valid
    Should the VLAN1 ip adress not the router ip adress ? Do i need an additional vlan for
    the router ? At the end i like to change the switch ip from dhcp to static (change automaticly
    when switching to layer 3 mode), but ive to look for the ios commands first.
    What else do i missing ?
    Thanks a lot,
    Marcus

  • I'm suddenly in need of help with my Firefox browser (6.0.2)

    Hi there,
    I'm suddenly in need of help with my Firefox browser (6.0.2)
    (OS: I use Windows XP).
    When I open up the browser, all I see is a completely blank white screen, with all the toolbars at the top.
    I know that my physical connections are fine: I've tested the modem, turned the pc off and on etc. and I can also receive/send emails.
    This problem started today, 8th September, 2011 and has never happened before.
    Is it a coincidence that Firefox updated itself just before I logged off yesterday evening? Could it be something to do with this particular new update?
    I've also noted that just before I "open up" Firefox, I now get a small box saying:
    [JAVASCRIPT APPLICATION]
    Exc In Ev handl: TypeError: This oRoot.enable is not a function
    This has never appeared before - I hope it offers a clue a to what is wrong.
    The Browser is not stuck in Safe Mode, by the way.
    Obviously, I can't search for any solutions to the problem on the internet, as I can't physically see any websites!
    (A friend is sending this query on my behalf from their pc)
    Any light you could throw on this confusing problem would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.
    If the only option is to uninstall Firefox and reinstall it from your site, then I'm also in trouble (I can't see the internet or make any downloads).
    In that case, would you be able to send the .exe file as an attachment to my email address? If so, please let me know and I'll give you further details.
    Many thanks in advance.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    * https://support.mozilla.com/kb/Server+not+found
    * https://support.mozilla.com/kb/Firewalls
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • New to Solaris administration - Need some help with some issues

    Hello all,
    I am a new to Solaris administration and need some assistance with a few things. I was going to make separate posts but decided it would be easy to keep track of in one. I really do not know much about the OS but I do have a little Linux background so that might help me out. I am going to number my problems to keep them sorted, so here we go.
    The machine:
    Sunfire V880
    4x 73GB HDs
    PCI dual fiber channel host adapter
    Attached RAID array:
    Sun StorEdge T3 Array with 9x 73GB HDs
    Sun DDS4 Tape Drive in a Unipack
    OS: Solaris 5.10
    Updates: Updated everything except 2 patches (Updating is a real pain isn't it? At least it seems that way to me.)
    1. So I might as well start with the update issues! These 2 updates will not install:
    -PostgreSQL 8.2 source code, (137004-02)
    Utility used to install the update failed with exit code {0}.
    -Patch for mediaLib in solaris, (121620-03)
    Install of update failed. Utility used to install the update is not able to save files. Utility used to install the update failed with exit code 4.
    No idea why the PostgreSQL update is not working, but the medialib patch seems to not have enough hard drive space.
    2. Where are all the drives? I don't know how to find the RAID box or the other 3 internal hard drives. When I installed the OS, I think I installed it on only one hard drive and that might be part of the reason why the medialibe update above says that I don't have enough space.
    3. I probably need more space for the OS and updates, is there a way to "add" space onto the hard drive that currently is running the OS?
    3. Once I see the other hard drives I wish to combine them to make a RAID 0 and RAID 5 array, how do I go about doing that?
    4. How can I find/see the tape drive?
    5. Does my swap space really need to be 64GB? I know the book I have read suggests it, but I only made it 5GB because it didn't seem to make sense to make it 64GB.
    Thank you in advance for the help. I know these are a lot of questions to ask but please go easy on me :)
    rjbanker
    Edited by: rjbanker on Mar 7, 2008 8:21 AM

    SolarisSAinPA*
    1.
    -PostgreSQL 8.2 source code, (137004-02)
    Utility used to install the update failed with exit code {0}.
    Exit code 0 means there were no errors. When you run showrev -p 137004-02, does your system show that the patch is installed? You can check the log for a particular patch add attempt in /var/sadm/patch/+patch_num_rev+1- A bunch of stuff shows up, here is a portion (I am not entirely sure what it means, there must be a least a page of stuff like this):
    Patch: 121081-08 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWc cccrr, SUNWccccr, SUNWccfw, SUNWccsign, SUNWcctpx, SUNWccinv, SUNWccccfg, SUNWcc fwctrl
    Patch: 122231-01 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWc ctpx
    Patch: 120932-01 Obsoletes: Requires: Incompatibles: Packages: SUNWcctpx
    Patch: 123123-02 Obsoletes: Requires: Incompatibles: Packages: SUNWccinv
    Patch: 121118-12 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWc smauth, SUNWppror, SUNWpprou, SUNWupdatemgru, SUNWupdatemgrr, SUNWppro-plugin-su nos-base
    2.
    Where are all the drives? I don't know how to find the RAID box or the other 3 internal hard drives. When I >installed the OS, I think I installed it on only one hard drive and that might be part of the reason why the >medialibe update above says that I don't have enough space.
    When you run format command, how many drives are listed? Identify your root drive (compare with output of df command you ran earlier) Please post here.2. Output of df-hk, looks like I ran out of room. Should I just go ahead and reinstall the OS?
    Filesystem size used avail capacity Mounted on
    /dev/dsk/c1t0d0s0 5.9G 5.4G 378M 94% /
    /devices 0K 0K 0K 0% /devices
    ctfs 0K 0K 0K 0% /system/contract
    proc 0K 0K 0K 0% /proc
    mnttab 0K 0K 0K 0% /etc/mnttab
    swap 42G 1.3M 42G 1% /etc/svc/volatile
    objfs 0K 0K 0K 0% /system/object
    /platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1
    5.9G 5.4G 378M 94% /platform/sun4u-us3/lib/libc_psr.so.1
    /platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
    5.9G 5.4G 378M 94% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
    fd 0K 0K 0K 0% /dev/fd
    swap 42G 1.1M 42G 1% /tmp
    swap 42G 32K 42G 1% /var/run
    /dev/dsk/c1t0d0s7 46G 47M 46G 1% /export/home
    3. So I guess the general consensus is to reinstall the OS, is that correct?
    4. There is nothing in \dev\rmt, and unfortunately I don't have a tape to test it with!
    5. I guess 5GB will be ok for what we do.
    Alan.pae*
    1. I think the above text might explain why it failed, although I don't know how to correct it.
    2. Output of format:
    # mount
    / on /dev/dsk/c1t0d0s0 read/write/setuid/devices/intr/largefiles/logging/xattr/onerror=panic/dev=1d80008 on Mon Mar 10 10:56:51 2008
    /devices on /devices read/write/setuid/devices/dev=4dc0000 on Mon Mar 10 10:56:19 2008
    /system/contract on ctfs read/write/setuid/devices/dev=4e00001 on Mon Mar 10 10:56:19 2008
    /proc on proc read/write/setuid/devices/dev=4e40000 on Mon Mar 10 10:56:19 2008
    /etc/mnttab on mnttab read/write/setuid/devices/dev=4e80001 on Mon Mar 10 10:56:19 2008
    /etc/svc/volatile on swap read/write/setuid/devices/xattr/dev=4ec0001 on Mon Mar 10 10:56:19 2008
    /system/object on objfs read/write/setuid/devices/dev=4f00001 on Mon Mar 10 10:56:19 2008
    /platform/sun4u-us3/lib/libc_psr.so.1 on /platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1 read/write/setuid/devices/dev=1d80008 on Mon Mar 10 10:56:50 2008
    /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1 on /platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1 read/write/setuid/devices/dev=1d80008 on Mon Mar 10 10:56:50 2008
    /dev/fd on fd read/write/setuid/devices/dev=50c0001 on Mon Mar 10 10:56:51 2008
    /tmp on swap read/write/setuid/devices/xattr/dev=4ec0002 on Mon Mar 10 10:56:52 2008
    /var/run on swap read/write/setuid/devices/xattr/dev=4ec0003 on Mon Mar 10 10:56:52 2008
    /export/home on /dev/dsk/c1t0d0s7 read/write/setuid/devices/intr/largefiles/logging/xattr/onerror=panic/dev=1d8000f on Mon Mar 10 10:56:57 2008
    3. Judging by the above text I will be doing a reinstall huh?
    4. Actually I am not familiar with tape backups let alone solaris backup apps! Any suggestions? (Preferably free, have to cut down on costs.)
    5. No comment
    Thanks for the help, hope to hear from you again!
    rjbanker

Maybe you are looking for