I need driver for the HDR-SR5 for windows 7

I need driver for the HDR-SR5 for windows 7

I used the Vista driver on Win 7 preinstalled notebook and it did work.
I have no idea what A200 notebook model you have but in my case the driver was called:
Flash Media Driver 2.0.0.6
This is a driver for your Bridge Media Slot. This slot lets you insert either a SD card, Memory Stick (Pro) or xD picture card.

Similar Messages

  • My disk utility will not let me highlight jornaled in mthe drop down menu. I need to erase the entire mac for re sell purposes.

    My disk utility will not let me highlight journaled in the drop down menu. I need to erase the entire mac for re sell purposes.

    You need to be booted from another source as you cannot delete or reformat the drive you are booted from. See if you can either use the original install disks (Snow Leopard or earlier) or internet recovery (Lion or later) to boot from and then be able to use the Partition tab to partition and format it correctly.

  • Why do i need to buy the same app for each device over and over again??

    why do i need to buy the same app for each device over and over again??
    and why cant i just pay for the app ones for all devices as long at it is with the same account??
    i hate that i have to oay for the same game or app three time one for ipad ones for iphone and ones for mac please do something about that apple..!!!

    First, you posted in the Mac App Store forum which are apps for the Mac OS X, not iOS devices.
    You do not need to re purchase your apps. Connect your iOS devices to your computer, launch iTunes. From the menu bar click Apps then click Sync
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible?

    I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible? And if it is how an i doing this?

    Hi I Pant,
    The idea that crossed my mind was to tie each of the lines coming from/going to "your device" to two of the DIO lines. Configure one these two ports as input, the other as output.
    When you want to read the state of the line, read from the line configured as input. Similarly, use the other port when it is time to write.
    Provided "your device" uses tri-state drivers/receivers, or can be used in a "wired-OR" configuration, this may work.
    What is "your device"?
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • I need to get the current assignee for a given request using SOA's java api

    I'm developing a spring app that interfaces with Oracle SOA suite and executes the actions such as approving requests using the api. I need to get the current assignee for each SOA Task this is dispalyed in the OIM console so it is getting it from somewhere. I tried getApprovers in the ITaskService api but this returns an empty list

    I have checked it once again and there indeed are links for ALUI components for Solaris on SPARC at edelivery.oracle.com. (Officially ALUI supports Solaris on SPARC only)
    If you have looked at Solaris x86, then you must not have found them. Please make sure that you are selecting the righ platform. Also, make sure that you click on the Aqualogic media pack so as to get the lists of the components included in it. (Point to Note: You need to go to the next level)
    For whichever component you are not able to find, try looking for it in the Metalink (My Oracle Support) if you have a support contract.

  • HT4910 I need to find the file location for my iCal in iCloud

    I need to find the file location for my iCal in iCloud for my Mac. I inadvertently changed the file location in Terminal and need to restore the proper location but do not know how to locate that information. Any help is much appreciated,

    You should find "Preferences" in your Edit menu in iTunes.

  • Morning, need to download the latest ios for my ipad...

    Morning, need to download the latest ios for my ipad..

    If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?

    I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?@

    I am having the same problem...did you ever fix it?

  • Need to Create the STATUS Profile for Q-Info record

    Hi Guys,
    Basically in the Q-Info record we have status profiles like VN, SP, MP OM and MP NOM etc... Under this status profiles there are few staus profiles assigned to it, in the same way
    I need to create the status profile for Q-Info record under the status profile MP NOM (Non Original Mfgr MP), so that when I am creating the Q-Info record I can select the status profile which is under the MP NOM.
    Guys anyone can guide me to create the status profile in BS02.
    Regards,
    SM

    BS02--->Select the status say " QM_P_001" ->Copy As F6  - >Enter new name>enter.
    Now chage the relevent data as per your requirement.

  • We have two Mac laptops, does anybody know if you need to purchase the Lion upgrade for both?

    We have two Mac laptops in the household, does anybody know if you need to purchase the Lion upgrade for each?

    No. You only pay for Lion once and can then install it on all of your household Macs.
    Purchase Lion in the App Store using one of your Macs and the install button will appear for Lion under the Purchases tab when you open the App Store with your other Mac. The App Store will ask for your user name and password to install Lion but won't charge you for the second install. If you have more than one iTunes account use the one that you used to purchase Lion. All apps in the App Store work this way.

  • Need  to find the class type for a material

    Hi all,
    i need to find the class type for the material.
    is there any FM or the table where i have both MATNR and KLART fileds.
    Kindly reply asap.
    Thanks
    Sri

    Hi,
    There can be multiple class types assigned to a material. You can view this in the classification tab in the material master transaction.
    You can pass the MATNR to OBJEK field of KSSK table after using neccessary converison Exit to get KLART(Class Type). It will return you a 3 digit Class type. You can find the description of the class from the class type master table TCLA.
    Hope this helps.
    Edited by: Priyabrata Samanta on Feb 11, 2008 11:43 PM

  • HT201210 I need to restore the factory settings for my I phone

    I need to restore the factory settings for my I phone

    To restore your iDevice, you have two options.
    1. Plug into iTunes and select your device and click restore.
    2. On your iPhone, go to Settings>General>Reset, and click which one you would like to use.
    If your device is locked up and you can't get into it,
    1. Open iTunes
    2. Power Down your Device
    3 hold down your home button and plug in the device to the computer at the same time
    4. Keep holding until your device shows the Plug into iTunes image.
    5. On iTunes, click restore
    Wait for the device to restore to factory settings and your done!

  • I need to find the keyboard command for "PrintScreen"

    I'm using a MacBook Pro with Mac OS X Version 10.7.5.
    Processor 2.4 GHz intel core 2 Duo.
    I'm just looking for the keyboard command for the "PrintScreen" function.
    Any help?

    Thanks, Niel,
    The only way that I could print all the columns on the page was to use the printscreen function. Regular printing cut off a crucial portion of the information.
    If you know of any way to bring the print screen to full size - mine would only print in a compressed version - I'd love to know that as well.
    Your answer, however, was very helpful.
    Thanks,
    Michael

  • How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

    How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
    When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro.  What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
    WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
    NOTE:  If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
    Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did.  He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
    Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse. 
    THIS IS WHAT YOU WILL NEED TO DO:
    First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
    down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up.  If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it.  Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

    I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
    I have a Linksys WRT320N I used for the initial Charter setup.
    I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
    Hasn't caused any issues so far but one thing I did notice.
    On the Linksys there were 3 DNS servers listed.
    The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
    I tried everything above, but light on modem still flashes yellow.
    I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
    I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

  • I have a new Samsung phone and I live in CT. Last month they charged me $38 on my bill for the sales tax for the new phone which was $600. I'm paying for the phone itself over 20 installments of $30 each.  Now again I'm getting that same $38 charge. I can

    I have a new Samsung phone and I live in CT. Last month they charged me $38 on my bill for the sales tax for the new phone which was $600. I'm paying for the phone itself over 20 installments of $30 each.  Now again I'm getting that same $38 charge. I can't  believe that the monthly CT tax is higher than the payment for the phone itself. Does this make sense. Last time I spoke with them on the phone it was for 1 1/4 hours for something simple. I don't want to call unless I need to. The salesman told me nothing about any of this. Thank you for any help you can offer.

    The bill from last month states:
    CT state sales tax**     $38.10
    ** In some states sales tax or surcharges are calculated on the full cost of the full retail price or VZW cost of the device you purchased and not on the discounted price you pay. The sales tax or surcharges charged on your device was based on $599.99 and appears on this first bill.
    The current bill says the same.
    Actually, now I'm realizing that last month's bill stated I was making the first payment toward the phone. Now this month also says it's the first payment toward the phone when it's really the second.

Maybe you are looking for

  • IPhone 5s global service not working in Ireland

    My daughter is on a school trip to Ireland. Got her the global plan for her 5s. She can get wifi but the phone is picking up vodaphone but she can't access internet except via wifi. Purchased the global plan for piece of mind and am frustrated . We w

  • Balancing Item Profit Center not filled in Line 0007

    Hi We are encountering a problem while posting an excise invoice through J1IEX. The system is not allowing to post the same and is giving a message highlighted in the subject Regards Samir

  • IPod is empty but says it is full, iTunes won't recognize it

    Hello, I have a click wheel 4th (?) generation 80gb ipod. Yesterday my ipod froze so I attempted to reboot it. Instead of holding down the menu/centre keys at the same time, I held down play/centre keys by accident. Anyhow, the ipod restarted fine bu

  • Webservices - No such operation....

    Hi, I'm implementing remote application (Ruby on Rails) for Vibe, using ruby Savon SOAP client. I can list all operations that Vibe offers, but I'm not able to call any of them. I always get "No such operation.... " error message back from the vibe s

  • ID already in use

    When I try to sign into FaceTime i get the message "Unable to verify "[email protected]" because it is already in use by another Apple ID".  What does this mean & how do I rectify it?