I need help contacting someone that can help me find who the previous owner was who set up my iphone 5s, there is an activation lock and i need to contact the owners. help??? i think the iphone was stolen and then sold to me
i think my iphone was stolen before being sold to me, i need help finding out who the original owner was to unlock the phone. any ideas on numbers i could ring? im super gutted
If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.
Similar Messages
-
I need a BAPI or function that can create a PO without the purchase req.
I need a BAPI or function that can create a PO without the reference to a purchase requisition. We are creating "direct POs" (with no reference to PR) manually. And we have a large amount of documents to create. I can't figure out if BAPI_PO_CREATE and BAPI_PO_CREATE1 can help us by doing this, because I've understood this BAPIs creates POs only with the reference to a purchase requisition.
Thanks in advance!!
SebastianSorry I'm late guys, I couldn't replay your posts because I was busy.
Charlie,
...just because we have the data already in the SAP system.
My client doesn't want purchase requisitions to be created from the PM orders. Instead he asked us to create the purchase workflow by generating direct purchase orders from the PM orders, basically taking the information from the purchase agreement within the order's tasks. Maybe you don't understand a bit what I'm saying, but let me get this straight: we can't use LSMW because data doesn't come from a legacy.
Ian,
...after all, and like you've said, we're gonna use BAPI_PO_CREATE1 for creating the POs. Today I finally realized that, purchase requisitions aren't mandatory for the bapi to perform the process. If something goes wrong, I'll let you know.
Thanks anyway for your attention.
Sebastian -
Need to know of a method / process that can be used to send the same msg to all those appearing in my email listings with the same extension after the "@" sign in their address(es) on my macbook [Snow Leopard].
If you simply want to send the exact same message to everyone in your address book with emails ending in "@whatever.com", you can do the following:
Create an email with subject, message and attachments but no addresses
Open Address Book, All Contacts
Search in Address Book for @whatever.com
Select the results and drag them into the To: or Bcc: field of the email. If Bcc: then put your email address in the To: field.
Send the email
This will not personalize the emails (such as with "Dear firstname:" at the top of the message) but it will let you send an idential message to everyone who meets your criteria. -
My iPhone was stolen a few days ago. It appears to be offline on the Find My iPhone app. If the person who has it turns it on only for a brief moment and then turns it off immediately, will the location still be found? Once it returns to being offline will the location still be sent to me? And also, how can I retrieve my pictures from my iCloud?
Anything is possible.
-
Does anybody know how I can get my Mac Book Pro back, which was stolen after a class I taught?
I have the store receipt, its serial number, however I had not installed i Cloud on my Mac Book and I'm not able to find my Mac back.
Thanks for helping me!Sorry to say but you are out of luck.
What To Do If Your Mac Is Lost Or Stolen
If you activated Find My Mac before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi. What you cannot do is track your computer using a serial number or other identifying number. You cannot expect Apple or anyone else to find your computer for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty. Be sure to report the loss or theft to the local police. Have the serial number handy. If your Mac is found it cannot be returned to you if you don’t have the serial number and proof of purchase.
Find My Mac can be used from Find My Phone at iCloud.com and via Find My Phone on your iDevice.
The following is third-party anti-theft software:
1. STEM 2.1
2. MacPhoneHome 3.5
3. MacTrack 7.5.0
4. VUWER 1.7
5. Sneaky Bastar* 0.2.0
6. Undercover 5.1.1
7. LoJack for Laptops
8. Hidden 2.0
9. Prey 0.6.2 -
System Image Restore Fails "No disk that can be used for recovering the system disk can be found"
Greetings
- Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used diskpart clean to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails. It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385 write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385 write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524 Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.------- -
How can I deauthorize Itunes on a computer that can no longer connect to the internet or is no longer working ?
You can't, which shouldn't be a problem unless you have 4 other computers authorized with the iTunes account and you need to authorize another.
Once you have authorized 5 computers, you can de-authorize all computere from a computer that is currently authorized followed re-authorizing the current active computers that need to be authorized. -
Is there a way to either run a "Score" thing in Keynote, or a text box that can be typed in during the presentation?
Keynote does not have this function.
The only way to do this is to use an annotation application. Google and find the cost and functionality you need, many have trial downloads. -
Lee3
May 25, 2012 5:36 AM
I have attempted to download with Bootcamp the Windows 7 drivers but the dowload will not progress past 25%!
Is there someone that can assist me with this issue?
:>/How long did you wait for the download to run? The last time I downloaded the Windows support files for Boot Camp, it was going very slowly, so I swapped away to another task. Several minutes later I came back and it had moved a little, but not much, so I went on with other things. When I got back to it several hours later, the download had completed. Perhaps you just need to let it go overnight to perform the downloads...
-
UDF in documents lines that can be Change after adding the doc.
Dear all
How can i create a UDF in documents lines that can be change after adding the doc? He need to mark some of the lines to already audit or not audit and the date of the action.
Kind Regards
MargaridaIt also depends on what documents you are wanting to add these comments to. On documents such as the A/R Invoice/ Delivery, and A/P Invoice/ Goods Receipt PO you cannot change the UDFs on the line item after the document is added (regardless of whether the document is closed). Sales Orders/ Quotes and Purchase Orders line item UDFs can be changed as long as the line hasn't been closed (or partially received/delivered/invoiced).
Hopefully that makes sense. I could give more of an explanation if I knew what documents you were wanting to add these line item comments to. -
hi i forqot my apple id password and i stuck in activation lock and i want to open my sister phone
please help mee
the
imei: 01 355400 132988 8
iccid: 8997 2011 0120 3163 8634 help me if you help me i will thank you very muchYou are not talking to Apple here. These are user forums.
Try this to jog your memory: http://iforgot.apple.com -
My husband does not have an itunes account and wants to set one up and we only have the one computer. can you have two separate accounts? We want to set up separate iphones.
How to use multiple iPods, iPads, or iPhones with one computer
-
Is there any way to an index that can be used to include the "OR condition "?
Hello I have some questions.
The test was conducted in the following procedure .
create table test
c1 varchar2(10),
c2 varchar2(10),
primary key(c1)
create index test_idx1 on test(c2);
Command> explain select * from test where c1 = 'AAAAAAAAAA' or c2 = 'AAAAAAAAAA';
Query Optimizer Plan:
STEP: 1
LEVEL: 1
OPERATION: RowLkRangeScan
TBLNAME: TEST
IXNAME: TEST
INDEXED CONDITION: <NULL>
NOT INDEXED: TEST.C2 = 'AAAAAAAAAA' OR TEST.C1 = 'AAAAAAAAAA'
Command>
Command> explain select * from test where c1 = 'AAAAAAAAAA' and c2 = 'AAAAAAAAAA'
Query Optimizer Plan:
STEP: 1
LEVEL: 1
OPERATION: RowLkRangeScan
TBLNAME: TEST
IXNAME: TEST
INDEXED CONDITION: TEST.C1 = 'AAAAAAAAAA'
NOT INDEXED: TEST.C2 = 'AAAAAAAAAA'
Command>
By including the "OR condition " in this test does not use the index.
Is there any way to an index that can be used to include the "OR condition "?
Thanks.
GooGyum.A database cannot in general use indexes in this way for an 'or' involving two different columns. However, for this specific example one can easily rewrite the query using 'UNION' to use the relevant indexes while still giving the same (correct) result:
Command> explain select * from test t1 where t1.c1 = 'AAAAAAAAAA' union select * from test t2 where t2.c2 = 'AAAAAAAAAA';
Query Optimizer Plan:
STEP: 1
LEVEL: 1
OPERATION: RowLkRangeScan
TBLNAME: TEST
IXNAME: TEST
INDEXED CONDITION: T1.C1 = 'AAAAAAAAAA'
NOT INDEXED: <NULL>
STEP: 2
LEVEL: 2
OPERATION: RowLkRangeScan
TBLNAME: TEST
IXNAME: TEST_IDX2
INDEXED CONDITION: T2.C2 = 'AAAAAAAAAA'
NOT INDEXED: <NULL>
STEP: 3
LEVEL: 1
OPERATION: OrderBy
TBLNAME: <NULL>
IXNAME: <NULL>
INDEXED CONDITION: <NULL>
NOT INDEXED: <NULL>
STEP: 4
LEVEL: 2
OPERATION: UnionMergeSort
TBLNAME: <NULL>
IXNAME: <NULL>
INDEXED CONDITION: <NULL>
NOT INDEXED: <NULL>
Maybe you can apply a similar trick? If you know there is no possibility of duplicate rows then you can further optimise this (in terms of performance) by using UNION ALL.
Chris -
Develop a program that can read pdf document in the UClinux OS?
hello,
I'm a programmer in a company which is doing embed development ,i want to develop a program that can read pdf document in the UClinux OS?
Can some one give me some ideas?
can some body give me some information?
My email is [email protected]
thank you!!!I would strongly recommend using one of the libraries that are available (Google). If you don't want to pay the (modest) costs of a commercial license, there are several open source projects with licenses that allow you to use them in commercial products.
-
Can I access my iPhone 5 remotely that has a damaged screen that can not be unlocked from the actual phone itself?
No.
Maybe you are looking for
-
Low Memory Footprint JVM needed, Please suggest.
Hi guys, I want a light weight (low memory footprint) Java Virtual Machine compatible with Java 1.5. It should be open source. Can anybody suggest me please. I've googled and tried to use some JVMs like Kaffe and SableVM. But I want some reliable VM.
-
Acrobat X save metadata to XMP file problem
I am having no luck saving metadata from a PDF to an XMP file using Acrobat X. This has worked properly for me in previous versions of Acrobat, but since upgrading to Acrobat X 10.1.7 the XMP file is given no name automatically, and when saved is zer
-
I've been asked to keep a new website (template) updated. Many people before I did, were responsible for this website. There are much problems to solve. I replaced the website into Dreamweaver, but I can't change the origin CSS Stylesheet. I tried to
-
Using and loading newer java classes...
Hi, I am trying to use a feature from the newest release of java in my application. Is it possible to find the exact class files within the jre and just put them amongst my application's classes? For example if I were to take the new transparency fea
-
Macbook air wireless extremely slow
I have a brand new macbook air and I'm having trouble with the wireless performance. I don't think its the same problem everyone else is having. I don't think I'm losing my wifi connection (I've only seen it drop once). But, loading web pages is extr