I need help finding the driver for my ethernet.it is a compaq presario sr1403wm with windows xp.

compaq presario sr1403wm
windows xp
my computer dropped the driver for the ethernet card and am unable to do a system restore.

HP Spring 2005 Original Network Adapter Driver Collection
or
SiS900 LAN Driver v1.19
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

  • Need help finding a driver for my hp webcam . My computer say I dont have a camera but I do.

    Need help finding my camera[webcam] on my computor.

    Can you provide us with your computer model number?  Take a look in Device Manager to see if there is an Imaging Devices group that includes the webcam.  If not, is there an Unknown Device listed?  This would indicate that your webcam is detected, but there is no driver installed.  We can help you find the correct driver if that is the case.  Let's start with the computer model number.  Thanks.
    I am an HP employee. The opinions expressed are my own and not those of HP.

  • Need help finding a driver for our NI A/D board

    My A/D board has the following numbers: 70243 and 84-01 and 3199F. Help me find the driver

    All of the NI drivers can be located on the NI Drivers and Updates page. In order to find the required driver, you will need to know what the device is called. You can find this information in several different ways. One way is to visually inspect the device. If it is an NI device then it should list the device name somewhere on the board. Also, you could locate the part number. This number usually ends in -01 or -02 and is printed near a bar code. If you can find this number, then simply type it into the search on ni.com to locate the name of the device.
    When the name of the device is figured out, you should then determine the appropriate driver for the device from the Drivers and Update page linked above.
    If it is not an NI device, then you will want to view the device manufacturer's webpage for available drivers.
    Please do not post back to this message as I do not believe the message pertains to the NI Measure software. The question is more related to a specific piece of hardware. Thus, you should repost this question, if another exists, to the appropriate NI Hardware category.
    Best of luck.
    Jared A

  • Help find the Driver CREATIVE LABS CT4810 chipset ES1373 for Win 2000. E-mail dirpt@mail.

    Help find the Driver CREATIVE LABS CT480 chipset ES373 for Win 2000. E-mail [email][email protected]][email protected][/url].

    AlexVP wrote:
    Help find the Driver CREATIVE LABS CT480 chipset ES373 for Win 2000. E-mail [email][email protected]][email protected][/url].
    You can start from here.
    jutapa

  • Need help finding the best Mac for gf

    hi I need help finding the best desktop. I am looking to buy MAC for gf.
    she uses final cut program question is does the GB/RAM/STORAGE matter on performance?
    She has a 2009 Apple computer I want to upgrade her to a new one
    I Dont know much when it comes to specs. She edits tons of videos and pictures.
    what's recommended for a video/photo editor that's good in performance ?

    Pro consumer might go with iMac even.
    Final Cut Pro latest benefits from dual AMD graphics.
    Video is one animal, graphics a much different.
    Great site full of performance, buying and configuration ideas:
    MacPerformance Go to the main topics
    I think you need to get clear on budgets. start with mid range and add all the options and can spend $4,000 or $7,000.
    Go to the Mac Store and do some looking and Google for reviews of software, hardware of course.
    Barefeats
    Rumors Pro
    Visit the forum for FCP-X would be a place to start.
    Final Cut Pro X

  • Help to find the driver for Satellite 1800-412

    Kind time of day dear administrators of a forum and participants, help to find the driver for toshiba satellte s1800-412, beforehand thanks.
    If there is an opportunity send on a mail [email protected]

    Hi
    This is a user to user forum dude ;)
    If you want accept an advice from a simply common Toshiba notebook user then got to this site:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU#
    Choose Archive Satellite Archive Satellite 18** - Satellite 1800-412
    Enjoy ;)

  • Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

    Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

    you can link
    OOH.invoice_to_org_id=CUST.cust_account_id   -- invoice customer
    OOH.sold_to_org_id=CUST.cust_account_id   -- sold to customer
    OOH.ship_to_org_id=CUST.cust_account_id   -- ship to customer

  • Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)

    I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
    My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
    We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
    We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
    I have...
    ...reset
    ...reinstalled 7.3.1.3 (over and over and over)
    ...tried different USB ports. (Early on, we saw it once after swapping ports).
    ...tried turning off the ability of the computer to 'Turn this device off to save power."
    I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
    So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
    But even after having tried everything, I still have an unrecognizable iPod.
    When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
    And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
    Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.

    Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
    Regards. Adam

  • I need to find the download for ACR 7.3 to use my nikon d600 raw files. i have cs5 running on macboo

    i need to find the download for ACR 7.3 to use my nikon d600 raw files. i have cs5 running on macbook pro with mountain lion OS.

    Hi,
    Unfortunatly the 7.x series of camera raw plugin is not compatible with photoshop cs5.
    You could download the 7.4 DNG Converter and convert your d600 files to dng copies which then photoshop cs5 will open.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5568

  • I have a compaq 6200 pro i can not find the driver for SM bus controller.

    I down graded the 6200 pro with the i3 chip  to winXP and now I can not find the driver for the SM bus controller does this system have a sm bus controller?

    Hi: Please click on the device in the device manager. Then click on the details tab. Post the top string of characters you see. Those will identify the type and model of the missing device and I can send you the link to the drivers. It is either your AMT driver, TPM driver or IMEI driver. In the meantime, install the chipset driver and reboot if you have not done so already. http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=5037900&prodNameId=5037902&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-88640-1 Paul

  • Where can i download the driver for my ethernet controller on windows 7 (macbook pro 2011)

    where can i download the driver for my ethernet controller on windows 7 (macbook pro 2011).
    after the installation of windows 7 i cant use my wlan or audio.

    http://www.apple.com/support/bootcamp/

  • Need to find a driver for cRIO-9211 thermocouple to be used with LabView

    I am using the NI cRIO-9211 Thermocouple input and the NI USB-9162 Hi-Speed USB Carrier and need to find a driver to interface the thermocouple with LabView 8.5.1. Could you point me in the right direction as to where I can download a driver for this?

    Hi Durnan,
    You will require the DAQmx driver for the USB 9162. This can be found here: ni.com/downloads, see DAQmx 8.8 - would do.
    You only require the DAQmx driver, as the C Series modules are supported - they can just be used in a cRIO as well.
    Hope this helps,
    Kind Regards,
    James.  
    Kind Regards
    James Hillman
    Applications Engineer 2008 to 2009 National Instruments UK & Ireland
    Loughborough University UK - 2006 to 2011
    Remember Kudos those who help!

  • I can't find the driver for my officejet 4500 g510 g-m printer

    Please can someone help me?? I need to download a current version of the driver for my officejet 4500 G510 g-m printer.  It stopped communicating with my Toshiba Laptop C655 S5212.  The disk I have for the printer is too old.  Thanks for any help that anyone can provide!

    Hi,
    Please use the following package:
        http://ftp.hp.com/pub/softlib/software12/COL32438/mp-109547-2/OJ_AIO_4500_G510g-m_Full_Win_WW_140_40...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Windows 7 can´t find the driver for HP Officejet 5510. (Windows Update is set to automatic.)

    Hello everyone, I just installed Windows 7 - 64 bit. Supposedly the driver for the HP Officejet 5510 will install automatically in Windows 7 when connected via a USB, which is not happening.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&lc=en&dlc=en&cc=us&os=4063&product=311...
    I am getting the message that Windows 7 can't find the driver. I don´t understand why?
    My Windows Update is set  to automatic.
    I see the device under printers. But when I click on it it says driver missing.
    Is there any solution? Possibility to get the driver some other way? Unfortunately HP doesn't provide a download on their website. 
    Can anyone help me, pleease?
    Honza

    I have the same problem. I spent all this money to get more features, not less so Windows 7 should run all of my XP stuff. Now I see that my HP Officejet 5510 all-in-one won't scan and I can't save in pdf format. C'mon HP....give us a driver! If I wind up having to buy another printer, I swear it won't be an HP if I get abandoned on this one. And I'll also switch vendors for all of the printers I'm responsible for replacing at work too.

  • Need help finding the right codec to play QT files

    Like many others who have posted, all the quicktime files on my drive have turned to black. Previously when I opened the file, I saw picture and sound. Now every single file has only audio, but the picture is black.
    I am operation on Mac O.S. 10.4.11. I am using Quicktime Pro 7.5. I have been trying to fix this problem for a month now. Many people have suggested I need to find the right codec, but so far I have not found it. I have tried: A52codec.component, AC3codec, MacOS 8.x, 9.1.x, Apple Intermediate Codec.com, Apple MPEG2.codec.component, Avilmporter-r7.component, DivX Decoder.component, DivX Encoder.component, DivX Pro 6.8.0.19 + keymaker, EnsharpEncoderMacOsX.cmg, Fbx 20091quicktime_macemu.pkg.tar, Fbx QT.pkg, Flipsformac, WMV Advanced.component, Flipsformac WMV Advanced Exports.component, Flipsformac WMV Import.component, IMXCodec.component, LAAME Universal Installer.mpkg, LAAMEncoder.component, QSSP_2.1.dmg, QSXEssentials.component, QSXEssentials.dmg, QTFvx.component, Red Quicktime Codec v3.1.pkg, Red Code iedcod.qt.component, Spectrograph.component, TSCC.component xiphqt.component, XviD_codec-r58.component, XviDELEGATE.component
    Nothing worked!
    I also tried to install Perian. This did not work.
    What should I do? Should I re-install my operating system and start over? About a month ago, all the video clips played just fine. Is there any solution?
    Thanks

    Hi Wangerer!
    I haven't even heard of half of those! You may have reached overkill on codecs!
    Get rid of some of them and read this:
    These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
    It is known to work in the great majority of cases with Safari 3.0.4, 3.1, 3.1.1, QT 7.3, 7.4.x and 7.5 and OS 10.4.11.
    Assuming you already run Tiger versions OS 10.4.11 and have Quicktime 7.4 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
    RealPlayer 11 (which is no longer in beta) for Mac from:
    http://www.versiontracker.com/dyn/moreinfo/macosx/15540
    Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
    Perian from http://perian.org/
    You should read this support page http://perian.org/#support in case you need to delete older codecs.
    Adobe FlashPlayer should first be uninstalled using the appropriate uninstaller available here:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2
    and then the latest version obtained from here:
    http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
    and installed.
    (You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS, but please see my footnote if you are running Leopard.)
    In earlier versions than QT 7.1.3 in Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
    You should also ensure, if you are running Tiger 10.4.11, that you have downloaded and installed all the correct version for your Mac of Security Updates up to and including 2008-004. (N.B. Security Updates require both a restart and a permission repair.)
    In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
    Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
    Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
    Important: Now repair permissions and restart.
    You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.
    There is an additional 'fix' you could try if you are having problems with Flash and Quicktime, depending on which type of Mac you have:
    On Intel Macs, make sure that you are not running Safari in Rosetta. You can check this, and change it, in the Get Info window.
    On PPC Macs, go to the Hard Disk/Library/Internet Plug-Ins folder, and drag the file 'QuickTime Plugin.webplugin' to the desktop. Quit and restart Safari. If things have improved you can trash that file. If they haven't put it back, as the lack of this plug-in can cause QT content in some widgets to cease functioning.
    And now there is an additional kid on the block: SilverLight. Microsoft has created their own version of what a replacement for Flash should be. You can read more about it here:
    http://silverlight.net/
    So, if you go to any sites that have been designed for this new Silverlight stuff, you can download the plug-in from here (but make certain that you are downloading SilverLight v.1.0 for OS X (10.4.8 upwards):
    http://silverlight.net/GetStarted/
    FOOTNOTE
    If you are running Leopard:
    Some users have mentioned that the latest Flash Player (v.9.0.115.0) conflicts with Leopard, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1

Maybe you are looking for