I need help is takeing a solaris 9 soc drive to work in solaris 10

I need to get a Sparc Storage Array to run under solaris 10. The soc driver that is needed is not supportted under solairs 10. I took the packages needed off of solaris 9 cds and installed them but no luck. I tried to to do a modload and modinfo but it was not there.
The package loaded a file into /kernel/drv/sparcv9/soc. I have solaris 9 onanother disk on the same system and looked at the system trying to copy and edit the files on 10 but not device paths show up in the system. I copyied a file called soc that was in /kernel/drv/ I edited the /etc/device_aliases and path_to_inst but no good.
There are no entries in the /devices/ dir that reference the soc path. I do not if than can work but really would like to get this working.

http://forum.java.sun.com/thread.jspa?threadID=5276131
(never mind that this OpenSPARC forum is utterly wrong for your question)

Similar Messages

  • Need help!! Compaq V3500 No audio driver available in website

    Need Help Compaq V3510TU P/N GG201PA#AKL Windows XP Professional 32 bit, After I re installed the new OS..
    The windows doesn't have the audio driver.  I tried everything download many of Conexant HD  many many version...
    they don't work at all. 
    Please tell me what you should do next
    P.S.  Last year I came to hp website, it provided many driver in windows xp but now nothing... where 'd they gone???
    I tried these, but didn't work
    sp36509
    sp35682
    and many many of them
    This question was solved.
    View Solution.

    Hi:
    Please read the XP downgrade guide at the link below:
    http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
    The instructions for installing the audio for your model can be found under the section labeled 1. Easy Models
    More than likely you didn't install the required MS UAA driver before installing your audio driver.
    You will need to uninstall any audio drivers you tried before installing the MS UAA driver.
    Paul

  • Need help in installing Snow Leopard without DVD drive

    Hi,
    I have a White Macbook 2008 model with 2.1 ghz processor and 1 GB Ram. The dvd rom is not working in my machine. It spits out the dvd's 99 out of 100 times.
    I need to upgrade from 10.5.8 to 10.6. Apple has sent me a single disk to install snow leopard.
    I am not willing to invest in new dvd drive either internal or external. Needed help on ways to install snow leopard please apart from using the dvd option.
    I do have a Firewire 400 cable but i do not know anybody anymore who has a mac machine with 400 port.
    Hence the cable is also useless and i cannot connect to anyother macbook and do the install using their drive.
    Please suggest.
    Regards,
    Rahul

    There are no direct options. Find a friend with a Mac that has a working optical drive. Buy an 8GB USB flash drive. Partition and format it for the Mac then clone the mounted DVD to the flash drive. Take it back to your computer and boot from the flash drive.
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the disk icon for the flash drive.
      5. Click on the arrow button below the icon.

  • Need help saving iPhoto library from damaged hard drive

    Trying to help my wife, she has the following:
    MacBook Pro running OS X Lion version 10.7.3
    iPhoto 11 version 9.2.2
    Her hard drive failed last week and she had a ton of photos on it, of course not backed up.
    We took her machine to the local Apple Store, they confirmed they couldn't recover the data and they installed a new hard drive in the MacBook.  We took the old hard drive to my local PC supplier who's very clever, he worked on the hard drive and was able to copy all my wife's documents to another storage device.....but, he couldn't copy the iPhoto library and is requesting some help.....he doesn't know much about Macs, nor how iPhoto works.
    I've read a lot of the posts on this forum and am learning about how the iPhoto library works....and how it requires a Mac based back up hard drive in order to copy it.  Okay, here are my questions:
    1.  My PC troubleshooting guy can see the iPhoto library icon on the damaged hard drive, he says its a huge file.  It appears we would need to supply him with a Mac formated back up hard drive, then he could just move that iPhoto library icon (which contains all photos) to the new back up drive.  Is this correct?
    2.  Once we have this old iPhoto library on the new back up hard drive, we could bring it home of course, but then I need to get it into the new hard drive on my wife's MacBook Pro.  I'm assuming I can plug this back up drive into my wife's machine, then import the old library into her machine.  How do I do this properly?
    3.  If I bring the old library into the new MacBook Pro hard drive, will it erase the existing iPhoto library on her new hard MacBook Pro hard drive, or will it combine them somehow?  She has added of course some pics to the new iPhoto library already, but if we have to delete them it won't kill us.  The old stuff that got recovered from the damaged drive is more important.
    Thanks ahead.....now to the experts?

    Thanks Terence.....
    regarding this point:
    3. use the paid version ($20) of  iPhoto Library Manager to merge the Libraries. that way you won't lose anything.
    I have another access to her new photos, whereby I could reload them onto her MacBook if we lose the new library.....so I'll save the $20 and just reload them.....two more questions:
    1.  So, if I drag the iPhoto library folder from the new back up hard drive to the Pictures Folder in Finder, will that overwrite the existing library folder on her MacBook?
    2.  After I drag this folder into finder, will iPhoto recognize everything?  I assume yes....just checking.
    thanks ahead!

  • Need help booting from DMG file without DVD drive

    okay so i have 6 computers with me right now. i need to use one that has a dvd drive to install it on a comp that doesnt via firewire.
    1- macbook with superdrive and os 10.5 (cant even open tiger install because its a new macbook
    2-iBook g4 with DVD drive BUT the firewire port is broken
    3-iBook g3 (one that needs tiger but only has a cd drive)
    4-ibook g3 (without dvd drive)
    5-powerbook g4 with dvd drive and firewire (for some reason will not read the tiger discs i just burned, even though ive already used them on the ibook g4
    6-mac pro with firewire and dvd drive, but the dvd drive is broken.
    so seems to me, every computer i have has a weakness for exactly what i need. what i need to know now is if i can boot the powerbook g4 from a DMG file of tiger install disc 1 and install is to the target ibook through firewire. if you have any suggestions on what i should try with the supplies mentioned above, please inform me. thanks!

    what i need to know now is if i can boot the powerbook g4 from a DMG file of tiger install disc 1 and install is to the target ibook through firewire.
    You can't unless the PowerBook is running Mac OS X Server, in which case the NetInstall feature can be used.
    (38733)

  • Need help getting networked shared variables on compact fieldpoint to work

    I'm still a newbie and am trying to get Networked Shared Variables to pass from a VI running on a PC to a VI running on a Compact Fieldpoint. I created a VI that sends a message via a Networked Shared Variable and a VI that receives it. I have them both in the same project. If I run them both on the PC, it works, I can send a message string from the first VI to the Networked Shared Variable and read it in the second VI. I have the second VI turn the LED "A" on and the LED "B" off if I send the string "a", and turn the LED "B" on and the LED "A" off if I send the string "b", and turn them both off if I send anything else. It works as expected if both the VIs are running on the PC. The second VI also continuously blinks the LED "C" so I can verify that it's running.
    I "deployed" the second VI to the Compact Fieldpoint as follows:
    In Project I dragged the VI from My Computer (under Project: name.lvproj) down and put it under the Compact Fieldpoint name.
    I right clicked on Compact Fieldpoint name and verified it was set to "Connect".
    I right clicked on the second VI and selected "Deploy".
    I started both VIs with the "Run" arrow. At this point I know second VI is running since the LED "C" keeps blinking. But, when I try to send an "a" or "b" nothing happens, so the VI on the Compact Fieldpoint must not be receiving the messages in the Networked Shared Variable.
    I also right clicked on Compact Fieldpoint name and selected
    "Disconnect". The second VI continued to run since the LED "C" keeps
    blinking, but I still can't get messages to pass.
    Any help will be greatly appreciated.

    I got this to work. I moved the library (.lvlib) containing the Networked Shared Variable to down under the Compact Fieldpoint name. Now it works.

  • I need help with MSI CR52-A2 52x24x52x CDRW Drive

    Hi,
    I am running Windows XP Home Edition.  My MSI CR52-A2 52x24x52x CDRW Drive will not work.  When I restart my computer the light on it flashes red, green, red, green, red, green, etc...  When XP is running, if I click on the drive under "My Computer" it opens up the drive but no files are found.  If I try to add new hardware, I'm told that the drive is working properly.  When I try to burn a CD with Windows Media Player I'm told no CD Burner is found on my system.  Please help!  Does this have to do with the BIOS?

    Welcome to the forum superaverage.  
    1) Before posting any problems related to your optical drive, please post full system specs AND PSU rails (look at my signature).
    2) Tell us how do you have your drive setup (Master, Slave, in primary channel or secondary channel).
    Edyros!  
    The recommended setup for ANY CD-R/W or DVD-R/W is to set them in the secondary channel as secondary master (assuming that your primary master is your HDD).
    If you're using nero as your burning program, try downloading the latest ASPI drivers for windows XP.
    Try flashing your drive's firmware to support more media and to fix minor bugs.
    ALWAYS use an 80-conductor IDE cable for ANY drive.

  • Need help building boost_1_37_0 on Solaris 10 U6 with Sun Studio 12

    Hi,
    Ok, please bear with me here. I've tried many different sets of instructions, and haven't had success with any of them (including the ones at http://blogs.sun.com/sga/category/Boost).
    Operating System: Solaris 10 x86 U6
    Compiler: Sun Studio 12 (SUNCC version 5.9)
    Boost version: 1.37.0
    The ONLY part of boost that I need is regex. I've never built external libraries before and building boost on Solaris seems a rather daunting task. So, could someone please explain, as clearly as possible, how do I build the boost::regex library using SUNCC?
    I know this is a very broad topic, but since I haven't had any luck with any existing instructions that google turns up, alas I am here.
    Thanks in advance if someone can help me,
    ~Slow
    Note: I don't need any special options, any special, non-standard install paths, nothing. Just a straight, stock, boost install.
    Edited by: SlowToady on Nov 10, 2008 2:18 PM

    First, be sure you have the current patches for Sun Studio 12. You can get them here:
    http://developers.sun.com/sunstudio/downloads/patches/
    Please install the current C++ compiler patch, the C compiler patch, and the common back-end compiler patch.
    You should then be able to build BOOST 1.37.0. The only problem I know of has been filed as CR 6767881, which results in an incorrect complaint about a constructor not being accessible. But I don't think that one affects regex.
    If you running into some other problem after patching the compiler, please post enough detail that we can investigate it.
    Questions about how to build just a portion of BOOST are probably best addressed to a BOOST forum.

  • Need help - setup network in solaris

    Hello! Today I install Solaris 10 for learning in my laptop and have some trouble. Please help me
    1. Set up network interface for wi-fi card iwi0
    (a. ifconfig iwi0 plumb
    b. wificonfig iwi0 connect airJet
    c. ifconfig iwi0 dhcp)
    2. Set up default route (route add default 192.168.100.2 (its my access point with dhcp server))
    Ping -s 192.168.100.2 -> done
    But when I trying in Firefox open any url - recieve error "host not found"
    okay. in terminal i put
    ping google.com
    and recieve answer
    host not found
    What is my problem?
    Thanks for u answers.

    Try changing hosts line in /etc/nsswitch.conf to:
    hosts dns files
    so that hostnames will be resolved via your dns servers. You also need to enter dns server info in /etc/resolv.conf.
    Here's a tutorial: [Configuring Networking|http://solaris-x86.org/documents/tutorials/network.mhtml  ] (kind of dated, but most of the info is still relevant)
    john

  • Need Help!!! Solaris 8 on SPARC

    Hello
    I'm trying to install Solaris 8 on ULTRA1 170.
    I cut all 3 CD's without any problem. Booting from the Install CD with "BOOT CDROM" command. It goes through the CD, reboots the machine and asks for the Software CD1.
    I put in CD1 click OK and it start to initialize the install. It goes about quarter of the bar and the bar disappears. I'm at the KIOSK screen and nothing happens (no cd activity). I waited a long-long time here.
    Solaris 7 was running fine on this system and I even reinstalled it just to make sure it is not hardware related. Downloaded and burnt software cd1 twice. No difference.
    What am I doing wrong? Please help!!! I�m going crazy. If you don't understand my exact problem just ask.      
    TIA chris

    Fixed it
    I had to boot from Software CD1 and I used jump start installer. Insted of web start what apparently did not work for me.

  • Need help & advice RE transferring from a hard drive to a new imac.

    Hello, firstly I apologize if I am setting up this question in the incorrect location, I am technology illiterate even as far as forums. Recently my 2007 Imac stopped working, repair people removed the hard drive (I believe) from it for me as it was too expensive to fix the machine. My big worry now is hopefully files from my old computer can be transferred to a new Imac? Also if so, is it something I can be walked through, as there aren't really a lot of reliable tech repair businesses in my local area? Is there also anything I should be mindful of when purchasing a new computer? My old system was 20"Mac, 2.0GHz, 1GB, 250GB capacity, I am assuming as long as my new system has better specs a transfer would work, but I really have no clue? Is there any special equipment I would have to buy, should I be aiming to get a new computer with certain specs? (get a system with 320 GB capacity, as opposed to 250GB for example) Sorry for all the questions, more so if they should be obvious, any help much appreciated!

    Hello and thank you kindly for taking the time to offer assistence. I believe its intel based, it is this model as linked to here.
    http://everymac.com/systems/apple/imac/specs/imac-core-2-duo-2.0-20-inch-aluminu m-specs.html
    Please bare with me so I can see if I have this right. Migration Assistent is an application or feature on the Imac I will be getting (will be a newer model than the one I posted above) - my newer computer would be considered the host and my older computer the target? Here is a bit I get a bit unsure. When the last repairmen gave me back my computer, they gave it back with the hard drive seperated - is that a factor or something worth mentioning? I am assuming that I need a wire of some sort or can a transfer be done wirelessly? I have tried figuring all this out and seen firewire cables mentioned a bit, but err I can't even find any sockets on the hard drive given to me by the repairmen whick makes me wonder if I am even looking for the right kind of info. Oh and I ~ to be continued ~

  • Itunes wont open need help backing up music on external hard drive

    My itunes wont open after upgraded to 8 , ive uninstalled and reinstalled itunes and quicktime and still wont work. i found a topic to possibly help me but i dont know how to tranfer my music to an external disk drive without being able to open itunes. i am getting so frustrated. please help

    A usb hard drive that Windows sees doesn't need software for a simple back up.
    Format the hard drive Disk Management, if it doesn't come already formatted, and then drag and drop the iTunes folder and whatever other data you want to back up to it.
    What you're describing doesn't sound like something iTunes did. If you're having general install troubles you have another problem with your system and it's time for a little troubleshooting to find out what's really going on.

  • Need help with Mac & PC not recognizing external drive (disk not readable)

    I am having trouble getting my computer(s) to recognize my Seagate External Drive.
    Have tried on my MacBook, iMac, 2 Mini's & my roommate's PC and all reveal the same issue: The Disk you inserted was not readable by this computer.
    MacBook/iMac both are working off of Leopard
    Both Mini's are on Tiger
    It won't show up in finder, rendering it unobtainable. I need to get the information if at all possible off of this hard drive (very important!!) so any help I can get would be greatly appreciated!
    It allows me to go into disk utility where it shows up with this information:
    Name : ST316002 3A Media
    Type : Disk
    Partition Map Scheme : Master Boot Record
    Disk Identifier : disk4
    Media Name : ST316002 3A Media
    Media Type : Generic
    Connection Bus : USB
    USB Serial Number : 3LJ07T540000
    Device Tree : /PCI0@0/USB7@1D,7/@4:0
    Writable : Yes
    Ejectable : Yes
    Mac OS 9 Drivers Installed : No
    Location : External
    Total Capacity : 149.1 GB (160,041,885,696 Bytes)
    S.M.A.R.T. Status : Not Supported
    Disk Number : 4
    Partition Number : 0
    And it is in the "about this mac" section with this information:
    Seagate Mass Storage:
    Capacity: 149.05 GB
    Removable Media: Yes
    Detachable Drive: Yes
    BSD Name: disk4
    Version: 0.00
    Bus Power (mA): 500
    Speed: Up to 480 Mb/sec
    Manufacturer: Seagate
    Mac OS 9 Drivers: No
    Partition Map Type: MBR (Master Boot Record)
    Product ID: 0x0500
    Serial Number: 3LJ07T540000
    S.M.A.R.T. status: Not Supported
    Vendor ID: 0x0bc2

    Additional info:
    on the disk4s1 info in disk utility, this information is seen:
    Name : disk4s1
    Type : Volume
    Disk Identifier : disk4s1
    Mount Point : Not mounted
    Connection Bus : USB
    Device Tree : /PCI0@0/USB7@1D,7/@4:1
    Writable : Yes
    Capacity : 149.0 GB (160,022,790,144 Bytes)
    Owners Enabled : No
    Can Turn Owners Off : No
    Can Be Formatted : No
    Bootable : No
    Supports Journaling : No
    Journaled : No
    Disk Number : 4
    Partition Number : 1
    so it looks like a whole lot of no's that need to be turned around! I can't understand why it won't be read by either Mac or PC with all of this, or how I can fix it

  • Need help with Macbook reinstall on new hard drive!

    Hey Everyone!
    So my old MacBook A1181 was damaged a bit in a fall from a shelf. I followed all the directions on PowermacMedic (bless them!) and put in a new LCD screen, as the old one was cracked. Cleaned a lot of cat hair out of machine while I was at it.
    I also replaced the hard drive with a new one, because the old one had a question-mark-over-a-folder icon. I'm very proud of myself, as there are only four screws left over. LOL!
    So now it's time to reinstall the Tiger system. The optical drive is not working, so I researched on how to make an external hard drive bootable, put the Tiger Installation on that and connected it via FireWire to the old MacBook.
    Turned it on and pressed Alt/Option at the same time. Great...up popped the Tiger Installation information. I've clicked on Install, etc., and am at the point where I need to choose a destination drive. Except there is none listed.
    I've gone to Disk Utility, and I can see the new drive there, but just the icon as the major piece of hardware...there's no sub-icon for it underneath, like there usually is.
    So, any ideas on how to make my new hard drive readable so I can choose it from the Tiger Installer?
    Any help would be much appreciated. I've never even attempted to do something like this before, and I don't want to give up just yet!
    Jenny

    Do this:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    After the formatting has completed quit DU and return to the installer. Install OS X.

  • Need help with iMovie storage on external Hard drive

    Is there any external HD that is fast enough to run iMovie? I just bought an 80gig ext. hard drive trying to solve that nasty memory problem that iMovie HD has... Well iMovie will not run because it's not fast enough, and the video clips play slow and choppy.. My question is does anyone know of a brand type or speed of ext. hd that is fast enough.. HELP!!! I need to finish this video pronto!
    Thanks
    ps.. the HD i bought was an iomega 80gig HD with usb 2 and 7200 rpm

    Eric, for a few dollars/Euros more (..or whatever your currency is..) you could buy a FireWire enclosure ..that's just a box with a socket or two on the back. It's not a drive, but just a box to put the disc drive inside, and it's complete with FireWire connections.
    Then unscrew the Iomega 80GB USB box, remove the 7200rpm 80GB disc drive, and insert it into the FireWire box, and connect up the multi-pin connector and power connector between the FW box and the hard drive. Connecting the drive is pretty simple. Look at "Mounting the drive into the bay", about halfway down this page.
    Hey Presto! ..You've now got a working 80GB 7200rpm drive ..plenty fast enough for iMovie.. which can be connected to your iMac via FireWire!
    Your disc drive is fast enough ..it's just your USB connection which is too slow; so just change the way that your drive is attached to the Mac, so that it uses FireWire.
    Suitable boxes are this kind of thing.
    It's simple: I have half a dozen assorted drives I've slotted into new bare-bones 'enclosures', and they all work fine by just plugging the enclosure (box) into a Mac FireWire port.
    Quick 'n' simple, and cheap!
    NOTE: Open up your Iomega box first, so that you can check what size of drive is inside, and thus what size of FireWire enclosure you need. A small 2.5" drive will certainly fit into a 5" enclosure, but a 5" drive obviously won't fit in a 2.5" enclosure! Though something like a WiebeTech DriveDock ..or the bigger and pricier ComboDock.. are open-ended, so they'll take any physical size of drive.

Maybe you are looking for