I need help switching to AT&T

I have a really confusing situation, and I really have no idea what to do.
I am currently on a Verizon family plan with 3 other members of my family. My line does not expire for another year, but one of the other lines should be up really soon. I just got an iphone, and I want to switch my number over to AT&T, leaving the 3 other members of my family in the verizon family plan without incurring a fee. Would there be a way to switch my verizon line with the line that is about to expire so that when the contract is up, I will be free to move over to AT&T (with my number) without a fee.
Let me know if you need further clarification.

Oliverkj....
If you want to port your number over and you are still in contract....you will have to pay the early termination fee. If you port the other line over that is about to expire, after the contract expires then you have to keep that number or get a whole new number altogether. You can not get your number ported over that is still in contract without paying the early termination fee....unless you can possibly find some loophole to get out of that contract without paying the fee. Hope you don't find my explanantion too confusing.
Message was edited by: BlingMe

Similar Messages

I need help switching back to iPhoto

In February of this year I switched from iPhoto to Aperture for very specific reasons. My laptop's hard drive was running out of space, as it was housing my photo library that was quickly approaching 25,000 photos and pushing about 30 Gigabytes, and I wanted to take advantage of Aperture's ability to store photo masters on an external drive.
So why switch back? When I described why I had switched and my experiences doing so back in February I had said that I ran into many problems all of which I was able to solve save two:
"The two things I have yet to solve, which are rather large things: 1) Spotlight can no longer find my photos since switching to [edit: from] iPhoto. I am really not sure where to start with fixing this so I think I’m just going to have to ask someone. 2) Reorganizing my keywords in Aperture (since I had them set up in iPhoto) is impossible. When I bring up the Keywords HUD, I’m greeted with all of my keywords residing subordinately to a master keyword of 'iPhoto'. When I try to access the keywords that are “below” iPhoto Aperture freezes. Perhaps I have too many keywords (I do have an awful lot). I’m not sure how to solve this one yet either. Maybe there is a raw .plist file that I can manually edit (and I am willing to do so)." -- Me.
After using Aperture for the past 3+ months I've yet to resolve either of these issues. Recently there was an update to Aperture from Apple that, according to the documentation for the update, was supposed to help resolve my second issue with having too many keywords for Aperture to handle - but it hasn't helped much. So since switching to Aperture I've not tagged more than maybe fifty photos, which is discouraging because I know that once I switch back to iPhoto I'm going to be busy tagging photos again.
So I suppose you could say I'm switching back for two main reasons. First, I want it to be much easier to tag my photos since that is probably the single most important thing to me and the experience with iPhoto and Keyword Manager ( http://www.bullstorm.se/KeywordManager.php ) is far superior to that of using keywords in Aperture. Second, I want my photos to start showing up in Spotlight searches again. I'm more than willing to deal with the caveat, albeit a rather large one, that I won't have my photos with me wherever I go anywhere but that they'll forever reside on my firewire drive.
What I need help with...
When I open iPhoto I see all of the previews for the photos that I had the day I switched to Aperture. However, the originals have been moved by Aperture onto my firewire drive - so when I click on each photo all I get is a ( ! ) symbol. The previews still reference a file that does not exist yet the iPhoto database still retains all of the relevant metadata (date/time, keywords, comments, etc) that I had worked so hard to put into iPhoto. I need to retain this information and somehow get the originals back into place so that iPhoto sees them again.
What I thought about doing was this: 1) Somehow restore the originals for the almost 25,000 photos into the place where iPhoto thinks they should be. 2) Move the entire library to my external firewire drive. 3) Import the remaining images that I've taken since switching to Aperture into iPhoto.
Since I have Aperture store my photos by date - importing only the images that I've imported into Aperture should be a piece of cake. I do not need to retain any metadata from Aperture since I've only tagged a few photos in Aperture and all of the other information I may need should be on the original file (like date taken, etc.). I know I'm going to lose a lot of edits that I've done like cropping, rotating, color balancing, red-eye reduction, etc. but I'm more than willing to lose all of that if it means that I can pick up where I left off and get back into the swing of things in iPhoto.
I've Googled like crazy and haven't found someone doing exactly what I'm trying to accomplish so any help with my current situation is greatly appreciated. I've also posted this on my blog http://cdevroe.com/notes/back-to-iphoto/

cvdevroe
2) Reorganizing my keywords in Aperture (since I had them set up in iPhoto) is impossible. When I bring up the Keywords HUD, I’m greeted with all of my keywords residing subordinately to a master keyword of 'iPhoto'.
Bear with me, my terminology may not be right. I'm heading in the opposite direction, and one of the advantages i see to Aperture is that I've got the same advantages in Keyword management as I have with KM in iPhoto.
Have you tried re-organising them using the control bar: Below the thumbs there's a drop down menu, by default it shows Photo Descriptors. Click on it and Select 'Edit Buttons'. You can merrily re-organise your Keywords in this window, and even have your changes reflected in live in the HUD.
As to the Spotlight searching, I'm afraid someone else will need to help on that one. Personally - and it's a regular on the iPhoto forums - I've never had much luck getting Spotlight to search within iPhoto for keywords, apart, of course, from using the search window in the iPhoto Window. I suspect a system-based search of iPhoto keywords is simply not possible.
What I thought about doing was this: 1) Somehow restore the originals for the almost 25,000 photos into the place where iPhoto thinks they should be.
That will work, but they'll need to be exactly as they were.
2) Move the entire library to my external firewire drive.
Easily done, after you've copied it over launch iPhoto holding down the option (or alt) key and choose 'Locate'. Navigate to the new location and that''ll be your default iPhoto Library Folder thereafter.
3) Import the remaining images that I've taken since switching to Aperture into iPhoto.
That should work too.
But the key is, can you return the iPhoto Library Folder exactly as it was, otherwise you'll need to create and populate a new library - and that will inevitable mean losing your keywords in iPhoto too.
FWIW, I need to keep iPhoto going for others in the household who are daunted by Aperture. My solution is a referenced library pointing towards the iPhoto Library Folder / Originals folder.
Regards
TD

Need help switching Flash slideshow

I admit it, I need help!
Here is my problem, I want the links on the left to change the Flash slideshow on the right when clicked.
I want to stay on this page, so only the Flash slideshow changes.
This is the site I'm working on.... http://www.hwas.com/A-events-page-3.htm#
I am using CS4.
HELP!

Shouldn't matter what version ... that hasn't changed much and is done pretty much the same way as long as I can remember. Which seems to be getting shorter and shorter all the time.
Anyways, nice site though. Well done.
Brad Lawryk
Adobe Community Expert, Dreamweaver
Adobe Usergroup Manager, Northern British Columbia Adobe User Group

Need help switching from LiveCycle to Distiler.

Hey, guys. Total n00b here. I am having problems selecting Distiller as my default form editor.
My PC runs:
XP Pro Service Pack 3
Office Pro 2003
Acrobat Pro 9
Last week I could not print anything doe to an error with my print spooler. Microsoft's suggestion was to edit the registry and remove all 3rd party print software. I am assuming this created a hit on Acrobat's functionality. In the past when I would edit fields, Distiller was my default choice. But ever since my registry hack, when I Go to Forms >> to edit, I no longer am able to use Distiller. My default is now LiveCycle Designer 8.2. I would like to go back to using Distiller, but I do not know how to change back. Is there something really, really easy I'm missing here, or do I simply need to uninstall and reinstall the entire Acrobat Pro 9 package? I have confirmed that Distiller is still installed on my machine.
I followed this Microsoft KB article if anyone thinks this will help.
http://support.microsoft.com/kb/810894
Thanks!

Michael,
Thanks for your response. Unfortunately, I do not know a lot about the teminology associated with, or the functionality of Acrobat, but the person I'm trying to help knows even less. I'm sure this is probably a really simple fix, but that I'm not describing what's going on well enough for someone to figure this one out. I'll post the e-mail that I received about the situation:
Almost all seems to be running well. There is still a delay when I send a job to the printer, happens - but slowly.
The problem I do have is that now when I open a pdf, under forms drop down it only allows me to edit the form with Adobe LiveCycle Designer 8.2, not thru Distiller or Acrobat as I could last week……Designer does not import or save(bring with it) any data already entered on the form. Before I could, with the click of a button, switch back and forth between entering information on the form and editing the form and its fields.
I don’t know if this is something that occurred as a default or exactly where Designer came from. I don’t mind it being there, just want to be able to choose what program I use, and at this time I prefer Acrobat/Distiller.
Please let me know what I need to do to get things back to ‘normal’
Again, thanks again for the respones. I don't know, but maybe I should just uninstall/reinstall Acrobat and *HOPE* that it is running as it once did.
Thanks!

Need help switching from cable modem to DSL

Howdy all. I've had an iMac for a few months now and I'm still clueless. LOL (PC user for years). Please list all the steps I need to do to switch from dial up to DSL. All help is appreciated and needed.
Thanks.
craftology.

As you dont say where in the world you are it is impossible to give specific information. However this is how it works in the UK. ISP's dont install anything for you. You sign up with the ISP, you purchase a package, this varies from the speed i.e 2mb, 8mb 16mb 20mb per sec.
You then have options such as unlimited downloads, or a monthly data cap. Then you pay for your first month usually with a debit/credit card and setup a direct debit from your bank account there after. Some contracts are for 12 months others are 3 months and some are 1 month at a time.
But the thing you need to be aware of in the UK if you already have cable then this usually means you have cable TV and a cable provided phone line. In the UK you cannot get DSL on a cable phone line you have to get a British Telecom line.
You then provide your BT phone number to the ISP. Then after they process your payment they inform you as to when your line will be activated and then they send you a preconfigured ADSL router. You just then follow the instruction plug it in and it works. Most boxes have WPA setup already and have the password printed on the bottom of the router. An engineer does not come to your house unless the is a problem and they detected a line fault that requires and engineer visit.
Of course if you are a business you can pay for a engineer visit to setup the network as well but this costs money.
edit just saw that your location in your profile is listed as 'Mo' where is 'Mo
Message was edited by: Tim Haigh

Need help switching my iphone from pc itunes to mac itunes

I just purchased a iMac10 and I have been able to get all of my iTunes content from my previous HP but when I try to connect my iPhone to the Mac, it gives me a pop-up stating the iPhone requires v9.2 and will not work with the Mac iTunes. Anyone got any ideas?

What version of iTunes do you have installed? Help > About iTunes.

Need Help Switching Carriers

So I wanted the Samsung Galaxy S5 but I have a T-Mobile phone...So when I tried to switch to a Family plan, and add more devices, this comes up.
However, when I did the same thing with Verizon, they have a drop-box labeled: "What kind do you want?" with the choices being phone, tablet, or broadband, and I am easily able to add as many devices as I could.
The Sprint pop-up didn't have any options, just a link to add a device. However, upon clicking the button and choosing the same device of a different color, this pops up.
I don't understand. It's a mobile smartphone, not a tablet.

Hello HydroCobalt-
I apologize for the lateness of my response; we are currently backlogged and trying to catch up. We definitely appreciate your interest in purchasing a Samsung Galaxy S5 from Best Buy and I’m sorry to hear that you were experiencing some issues while doing so.
I’m afraid that I couldn’t duplicate the issues that you were experiencing, so I’m not going to be able to offer much assistance. Hopefully you’ve gotten around the problems you encountered, but if not, I would encourage you to either call in to 1-888-237-8289 for more assistance or visit your local Best Buy store.
Happy Holidays!
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Need help switching my iPhone from connecting to old PC to new Mac.

Just bought a new Mac laptop today, and would like to connect my iPhone to this new Mac instead of the old PC I have been using for forever. However, I can't seem to figure out just how to do that. Trying to avoid restoring at all costs.

taylorlway wrote:
...okay...but how do I do that? New to the Mac world.
Best way is to use -> Windows Migration Assistant..
This will transfer all your user data, not just iTunes.

Need help switching to Gmail from MobileMe

I'm ditching MobileMe (MM) after several years because it's just not worth the $100/year to me anymore. I now want to start using Gmail IMAP instead with Mac OS X Mail and my iPhone.
I already have a Gmail account and have been using it alongside of the MM account. I have emails in both accounts that I don't wish to lose. But I don't want to keep using separate accounts, either. I would like to forward my MM emails for the remainder of my subscription (until September) to Gmail. I also want to set up Mail on my MacBook and Mac Pro to exclusively use my Gmail account.
I have several mailboxes set up in Mail that are stored on the MM server. Is there a way to transfer those mailboxes and the messages in them to Gmail? The problem if I do this is that there will be a significant number of duplicate messages because Gmail archives all received messages. There would be a copy from my MobileMe account (originally forwarded from Gmail) and a copy of the original message sent to the Gmail account for many of the messages in those folders.
But if I don't transfer the folders over there, I'll lose the folder hierarchy and some of the messages that were sent directly to MM and not forwarded from Gmail.
Any ideas on how I can do this? Thanks.

You might be able to push the emails up to Gmail if you have it set up as an IMAP account in Mail. But Gmail's IMAP support is really quite bad so I don't know how easy or practical this would be.
Note, Apple Mail makes it trivially easy to have messages be either on the server or on your local machine, so there's no reason you can't just move all the mail folders that are on the MobileMe servers to your local machine.
Of course, with a Mac and an iPhone and the new "locate my phone" and "remote wipe" services, I'd think it'd be a bad reason to ditch MobileMe now. Those are two services I think are worth the comfort alone

I just created an iCloud email and I want to use that email for my iTunes account as well. I need help suiting the old apple I'd because I do not remember anything associated with that email and I don't know the security questions

I just created an iCloud email and I want to use that email for my iTunes account as well. I need help switching the old apple ID because I do not remember anything associated with that email and I don't know the security questions or the login for that old email.

You cannot do that. The AppleID you used to create the iCloud account is an active primary email address. The email address you created with the iCloud account is also an active primary email address (all Apple domain email address automatically become AppleIDs as well). You cannot replace the primary email address on one active AppleID with the primary email address on another, active AppleID.
You can use your iCloud email/AppleID with iTunes, but it will be a separate account, so all your previous purchases remain tied to the other AppleID you have.
I don't understand your statement that you could not remeber your old AppleID password, as you would have had to use it to create the iCloud account in the first place (the first step of creating the iCloud account required you to login with your existing AppleID and password)?

Help need to switch Muse site to BC on a allready hosted plan

Hi, i also posted on BC forum...
I have a client that was in a hurry to have his emails accounts before the entire website.
So i went on and bought the email marketing plan (cos he will also need to do email campains) an pointed his domain everything is working fine, at this moment he has his accounts the domain is live.
The site would be just a small 7-10 pages not to complicated.
Has a graphic designer (who has venture into Business catalyst cos it had all the solutions i needed, well that's what the promotional videos said anyway) I made a site in Muse.
First i did a temporary page thats says "comming soon", and then i made the entire site, all the design and menu but with blank pages cos the client didnt have all the content yet (and still dont have). I uploaded that site to a sub directory so he could see the evolution.
He approved the design, yay!
At the end of the process, he told me he needed to have full control with the editor. (style, images, bulleted list, need to put downloadable document like pdf etc.) i told him that he could only modify what was allready there with the Muse in Browser editing (that he saw when i made the pitch using another site) he was impress with the way it worked.
so i told him i would have to remake "template".
I thought of using a BC template, and modify the looks to adapt to my client image, Of course, use a responsive theme so he could make the change at one place only. (cos in Muse you need to make the changes on the 3 layouts).
Now, i created a new temporary site using one of the new responsive template available.
How can i import that new site onto his live domain? In other words, how can a switch from a theme made in Muse, to a BC template?
cant i just delete everything in the root folder, and upload the entire new site via ftp?
please help me find the solution. i am a bit in a panic here
hope you could understand my lousy English.
Sincerely,
i.d.

This would need to be transparent for m'y client...
Y
Envoyé de mon iPhone
Le 2014-04-20 à 15:29, Sanjit_Das <[email protected]> a écrit :
Re: help need to switch Muse site to BC on a allready hosted plan
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Thanks for additional details.
Unfortunately we cannot change site template of a live site in BC , but as a workaround Create a site from BC using the template you wish to use then publish the site from Muse to the site created from BC and transfer the contents stored from live site to trial site. Ater final transition is done , you can delete the already paid site and make live the new trial site which includes new site template.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6314730#6314730
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6314730#6314730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6314730#6314730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Need help [JS]: select images/captions in InD, switch to Bridge and write to XMP

I've got a javascript for CS3/Tiger that I'm writing that eventually will let a user select an image and a caption in InDesign, then tells bridge to write the caption data into the image metadata. I need help - the script works in pieces, but not when put together.
It's built as an indesign script, then follows the procedure to create a script object to send to bridge. When it runs, the indesign portion works fine, but nothing happens in bridge.
The script is below, with comments.
Can someone help!? Thanks.
// This is the InDesign portion of the script, which was tested separately and is working fine. Right now, for testing purposes, the data from this portion isn't even used by the later Bridge portion but once I get the bridge part together, it will use those variables.
#target "indesign-5.0"
var myObjectList = new Array;
//Script does nothing if no documents are open or if no objects are selected.
if(app.documents.length != 0){
if(app.selection.length != 0){
for(myCounter = 0; myCounter < app.selection.length; myCounter ++){
switch(app.selection[myCounter].constructor.name){
case "TextFrame":
var myCaption = app.selection[myCounter].contents;
$.writeln(myCaption);
break;
default:
var myLink = app.selection[myCounter].graphics[0].itemLink.filePath;
$.writeln(myLink);
// here's where I create the string of the script to send to Bridge.
// the script itself is almost completely a lifted from the SnpModifyMetadta sample from the Bridge sdk
// it basically finds a certain image file and modifies the description metatata. i hardcoded the caption text and image path just for testing- eventually i would like it to use the variables from indesign.
// this script works fine as-is when run in the original Bridge scripting context.
// the method here of concatenating and sending the myScript string works fine when i use a different (smaller) script. so i can't tell why it's not working!?
var myScript = "function SnpModifyMetadata()";
myScript += "{";
myScript += " this.requiredContext = \"Needs to run in Bridge, \nwith a selection of a file, \nideally with some metadata\";";
myScript += "}";
myScript += "SnpModifyMetadata.prototype.run = function()";
myScript += "{";
myScript += " if(!this.canRun())";
myScript += " {";
myScript += " return false;";
myScript += " }";
myScript += " if( xmpLib == undefined )";
myScript += " {";
myScript += " if( Folder.fs == \"Windows\" )";
myScript += " {";
myScript += " var pathToLib = Folder.startup.fsName + \"/AdobeXMPScript.dll\";";
myScript += " }";
myScript += " else";
myScript += " {";
myScript += " var pathToLib = Folder.startup.fsName + \"/AdobeXMPScript.framework\";";
myScript += " }";
myScript += " var libfile = new File( pathToLib );";
myScript += " var xmpLib = new ExternalObject(\"lib:\" + pathToLib );";
myScript += " }";
myScript += " $.writeln(\"About to run SnpModifyXML\");";
myScript += " var thumb = new Thumbnail(Folder(\"/Macintosh HD/Users/hearstuser/Desktop/BridgeScriptImages/orion_stack copy 6.psd\"));";
myScript += " if(thumb.hasMetadata)";
myScript += " {";
myScript += " var md = thumb.synchronousMetadata;";
myScript += " var xmp = new XMPMeta(md.serialize());";
myScript += " $.writeln(\"SnpModifyXML: About to modify XMP data for \" + thumb.name);";
myScript += " $.writeln(\"XMP packet before modifications:\");";
myScript += " $.writeln(\"-------------------------------------------------\");";
myScript += " $.writeln(xmp.dumpObject());";
myScript += " xmp.deleteProperty(XMPConst.NS_XMP, \"Description\");";
myScript += " xmp.setProperty(XMPConst.NS_XMP, \"Description\", \"hoThereHeyThere\");";
myScript += " var d = new XMPDateTime(new Date());";
myScript += " d.convertToLocalTime();";
myScript += " xmp.setProperty(XMPConst.NS_XMP, \"ModifyDate\", d, XMPConst.XMPDATE);";
myScript += " $.writeln(\"XMP packet af

Recently I received an e-mail from a user asking me to remake the script I had posted here a while ago.
I rechecked my previous post and found a couple of serious mistakes. So I revised it according to what he asked. Each page in his InDesign document contains one image and one text frame with description.
At start the script checks the selection. If nothing is selected it processes all pages in the document. In case two objects are selected – it checks whether one of them text frame and the other a rectangle and if the rectangle contains an image, then it reads the contents of the text frame, replacing hard and soft returns with spaces and writes this text to the corresponding image’s description field.
In the end, it updates all links and saves the file.
The script works both on Mac and PC, assuming that CS3 installed in the default location so long as it depends on libraries:
/C/Program Files/Adobe/Adobe Bridge CS3/AdobeXMPScript.dll (on PC)
/Applications/Adobe Bridge CS3/Bridge CS3.app/Contents/MacOS/AdobeXMPScript.framework (on MAC)
So, if necessary, correct these lines.
Here is my script in case somebody is interested:
#target indesign
var myDoc = app.activeDocument;
var mySelection = app.selection;
if (mySelection.length == 0) {
    ProcessPages();
else if (mySelection.length == 1) {
    alert("One image and one textframe should be selected.");
    exit();
else if (mySelection.length == 2) {
    try {
        if (mySelection[0].constructor.name == "TextFrame" && mySelection[1].images.length == 1) {
            var myTextFrame = mySelection[0];
            var myImage = mySelection[1].images[0];
            var myCaption = ReplaceReturnWithSpace(myTextFrame.contents);
            var myPath = new File(myImage.itemLink.filePath).absoluteURI;
        else if (mySelection[1].constructor.name == "TextFrame" && mySelection[0].images.length == 1) {
            var myTextFrame = mySelection[1];
            var myImage = mySelection[0].images[0];
            var myCaption = ReplaceReturnWithSpace(myTextFrame.contents);
            var myPath = new File(myImage.itemLink.filePath).absoluteURI;
    catch(e) {
        alert("Something wrong with your selection.\nError: " + e.message);
        exit();
    CreateBridgeTalkMessage(myCaption, myPath);
else if (mySelection.length > 2) {
    alert("One image and one textframe should be selected.");
    exit();
UpdateAllOutdatedLinks();
myDoc.save();
alert("All done.");
//+++++++++++++++++++ FUNCTIONS ++++++++++++++++++++++
function CreateBridgeTalkMessage(myCaption, myPath) {
    var bt = new BridgeTalk();
    bt.target = "bridge";
    var myScript = WriteCaption.toString() + '\r';
    myScript += 'WriteCaption(\"' + myCaption + '\", \"' + myPath + '\");';
    bt.body = myScript;
    bt.send();
function WriteCaption(myCaption, myPath) {
    if( xmpLib == undefined ) {
        if( Folder.fs == "Windows") {
            var pathToLib = "/C/Program Files/Adobe/Adobe Bridge CS3/AdobeXMPScript.dll";
        else {
            var pathToLib = "/Applications/Adobe Bridge CS3/Bridge CS3.app/Contents/MacOS/AdobeXMPScript.framework";
        var libfile = new File( pathToLib );
        var xmpLib = new ExternalObject("lib:" + pathToLib );
    var thumb = new Thumbnail (File (myPath));
    if (thumb.hasMetadata) {
        var md = thumb.synchronousMetadata;
        var xmp = new XMPMeta(md.serialize());
        xmp.deleteProperty(XMPConst.NS_XMP, "Description");
        xmp.setProperty(XMPConst.NS_XMP, "Description", myCaption);
        var updatedPacket = xmp.serialize(XMPConst.SERIALIZE_OMIT_PACKET_WRAPPER | XMPConst.SERIALIZE_USE_COMPACT_FORMAT);
        thumb.metadata = new Metadata(updatedPacket);
function ProcessPages() {
    var myPages = myDoc.pages;
    for (i = 0; i < myPages.length; i++) {
        var myPage = myPages[i];
        if (myPage.textFrames.length == 1 && myPage.rectangles.length == 1) {
            if (myPage.rectangles[0].graphics.length == 1) {
            var a = myPage.rectangles[0];
                var myImage = myPage.rectangles[0].graphics[0];
                var myPath = new File(myImage.itemLink.filePath).absoluteURI;
                var myTextFrame = myPage.textFrames[0];
                var myCaption = ReplaceReturnWithSpace(myTextFrame.contents);
                CreateBridgeTalkMessage(myCaption, myPath);
function ReplaceReturnWithSpace(myString) {
    myString = myString.replace( /\n/g , " " );
    myString = myString.replace( /\r/g , " " );
    return myString;
function UpdateAllOutdatedLinks() {
    for(var myCounter = myDoc.links.length-1; myCounter >= 0; myCounter--){
        var myLink = myDoc.links[myCounter];
        if (myLink.status == LinkStatus.linkOutOfDate){
            myLink.update();
If somebody interested in developing this script further, do not hesitate to post here your feedback.
Kasyan

My screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

my screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

If you have not done a factory reset on the device, I recommend doing a complete factory reset.
Factory Reset - Warning this will reset device back to original factory settings.
This method will not erase any MDN/MIN information
Turn off the phone
Press Power + Volume Up/Down at the same time and hold until display will show a triage android screen
Display will show:
Reboot system Now
Apply sdcard:update.zip
Wipe Data/Factory Reset
Wipe Cache Partition
Use VOL Down key to scroll down to "Wipe Data/Factory Reset", press home icon to select option and wipe device.
Display shows "All user data will be wiped out", press VOLUME Up to continue or VOLUME Down to exit.
Press Volume Up
Press Home to select "Reset System Now" - device will reboot
If the problem persist I recommend having a store technician take a look at the device.
Copy and paste the link below into your browser's address bar for the store locator.
http://www.verizonwireless.com/b2c/storelocator/index.jsp

Im having trouble using bbciplayer on my ipad it says i need to switch to wifi but im already connected can any one help?

im having trouble using bbciplayer on my ipad it says i need to switch to wifi but im already connected can any one help? I ve uninstalled/ reinstalled switched it on and off what next?

Did you try downloading the movie from iTunes on your iPad? I know it takes longer but I'd try that.
Also try to reset all settings.
Settings > General > Reset. Reset all settings.

Need help to restore my caller ID on new replaced sim card... iphone network won't switch feature on

Need help to restore my caller ID on new replaced sim card... iphone network won't switch feature on

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

I need help switching to AT&T

Similar Messages

Maybe you are looking for