I need help troubleshooting computers not showing up on network

seriously, everything was fine until xmas eve. Now I can't see the computers on the network on a mac or a pc.
Now, when I go to Start/My Network places on a pc the share points do not show up.
Also when I go View Workgroup Computers - it returns an error. In the error it mentions permissions. I've propogated permission, restarted SMB services and restarted twice.
OSX 10.5.1, Xserve, standalone server, SMB services are running, one username and password for everyone with r/w permission, even guests access is turned on, ...
AT&T Netopia dsl modem (bridged mode), Linksys wireless router with ip's assigned to all computers, to a switch that routes to users and two more switches.
note - I can see a few macs on Mac OSX Tiger and Leopard but nothing on the pc's. I can, however, see a unix sever that's on the network by typing \\ServerName in an explore address bar. And at one time I could type in \\Xserve on both macs and pc's but no longer.
Thanks,
ctrent

Any relationship to what works and what doesn't?
no
Could there be a bad cable or bad switch port?
I've thought about that - checked and rechecked
Do you know how to see if there are two momputers with the same ip connected to a network?
Tried swapping a working and a non-working box to see if it's the connection that's stuffed?
no
but I just did
I tested an imac using the same connection. It was able to browse the entire network.
I noticed that MacBookPro had tld-internal.com in the Search Domains entry box.
I entered TLDMacserver.com as the search domain and was able to browse the server share points and read and write. (hoorah!)
I think that this is where the problem is - Is there a domain that needs to be set up or is already setup? I don't know of a setting on pc's to Search Domains - is this just a mac thing?
Now, seeing the other computers is the issue. I can only browse 4 macs and the Xserver on a mac but nothing on the pc's.
Is there something in the Advanced TCP/IP Settings that I should know about?
My server name on the left panel in Server Admin is TLDMacserver-com.local.
Under Settings/Network the computer name is TLDMacserver-com
Computer Name - TLDMacserver.com
Local Hostname TELDMacserver-com
Network Interfaces: Ethernet 1
IPv4
192.168.0.32
DNS Name: TLDMacserver-com.local
Anything interesting in the SMB-related server log files on the Mac OS X Server box?I'm not really sure what to look for.
That's one of those cases where digging through the logs looks for oddities.
I would probably have as much luck digging for gold.
Also, probably related to my problem - my logmein.com remote conrol no longer works. I tried deleting the machine from my list and reinstalling Logmein on the server, but it won't install.
It says:
Istaller is damged
Installer is unable to open the package.
This is likely due to install framework's runner executable not having he proper ownersip &/or persmissions.
Definitely seems that something got stomped on. Mayhap the disk?
What's the state of your data archives?
for those machines that can browse it's working fine.
Your backups current?
yes. A firewire drive that's swapped out. They both are backing up right.
Next step would be to boot the installer DVD and verify the disk and verify the disk protections.
it's just a download file from LogMeIn.com
As soon as it downloads that error pops up and when I manually try to run the .pkg the error occurs.
Up until now I've been able to log in just fine from anywhere.

Similar Messages

HT5312 I need help it's not showing me how send the security password to my email

I've been trying to buy this game and it says it's my first time purchasing this item on this phone and I forgot the security password and it's not showing me how to send it to my weak I need help please and thank you.

You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(104015)

Domain Computers not showing up in Network

Whenever I try to view the Network Computers on any machine on my domain, I can only see 5 servers. There should be about 15 servers and 50 workstations.
I have confirmed that Netbios over TCP/IP is enabled.
All the proper services are enabled and automatic. Computer Browser, DHCP Client, DNS Client, Network Connections, Network Location Awareness, RPC, Server, Workstation, TCP/IP Netbios helper
Any help would be appreciated.
EDIT: Also, I am able to browse to all the servers and workstations by going to \\hostname

Is the built-in firewall are disabled on both side.windows xp and windows server?
You have to disable the Server Message Block (SMB) Signing to fix the "System error 64 has occurred. The specified network name is no longer available" with the net view command in cmd.
Here is a link in which you can download hotfixes to fix this problem:
http://support.microsoft.com/kb/916846
http://technet.microsoft.com/en-us/library/cc786681.aspx
Yes both client and server side Windows firewalls are disabled. I went ahead and disalbed the SMB signing. We'll see if that has any effect. Thanks for the help.

HT5654 please I need help, I have not been able to upgrade my iOS from 6.1.2 to 6.1.3?

please I need help, I have not been able to upgrade my iOS from 6.1.2 to 6.1.3?

Hello mpacology
The article below will provide assistance with upgrade your iPhone operating system. You can do this through iTunes or through the Software Update section in Settings >General > Software Update
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
Thanks for using Apple Support Communities.
Regards,
-Norm G.

So im about to buy a mac pro, I just need help cause im not sure if it's worth paying more for instance, a hi-res screen compared to the stock screen, and will i really miss the .2 ghz and the upgraded video card if I get the 2.0 ghz mbp?

So im about to buy a mac pro, I just need help cause im not sure if it's worth paying more for instance, a hi-res screen compared to the stock screen, and will i really miss the .2 ghz and the upgraded video card if I get the 2.0 ghz mbp?

The_Tiger92 wrote:
So im about to buy a mac pro, I just need help cause im not sure if it's worth paying more for instance, a hi-res screen compared to the stock screen, and will i really miss the .2 ghz and the upgraded video card if I get the 2.0 ghz mbp?
It appears the 15" 2.2 ghz isn't worth spending $400 more for, but you get the 1GB Radeon 6750M that has four times the VRAM than the 15" 2.0Ghz model and about 167% more performance. High settings on all current games with over 50 fps.
If your not into 3D gaming or just light weight, then the 2.0 Ghz (last years performance) will suffice on low-medium settings at about 30 fps.
The 13" is rather poor as it has integrated graphics. 30 fps on only some games.
The high res screen is a excellent choice and the anti-glare is great for viewing just about anywhere.
No messy films to replace at $30-$40 a pop.
A lot of people bring the glossy screens back once they hear about the anti-glare.
http://www.pcpro.co.uk/blogs/2011/05/23/glossy-vs-matte-screens-why-the-pc-indus trys-out-of-touch/
Here's my 17"
In my opinion the extra $400 for another 2-3 years of use out of the computer is worth it.
Quad cores are more than enough for most uses for most people for many years, it's just a slow card is going to make the machine feel slow in rendering graphics in the future.

HT1549 Shared files do not show up on network

Macmini running on OS X 10.6.8 on a trendnet router connected to windows 7 pc. Mac will not show up on network after going over the steps to set up file shareing.

Hello Jfrosa,
Thank you for the details of the issue you are experiencing with File Sharing. I found an article that should help with troubleshooting this:
OS X: How to connect to Windows File Sharing (SMB) using Snow Leopard or earlier
http://support.apple.com/kb/ht1568
Thank you for using Apple Support Communities.
Best,
Sheila M.

Wireless network connection not showing up in network connections

Hi, Experts,
I recently re-image my Toshiba laptop (using window xp installation disk) due to I deleted few system files accidentally and can not boot the system up.
Before I re-image, I have no problem to connect Fios internet. After the re-image, the wireless network connection not showing up in network connections, so I cannot set up my Fios internet.
How to set up the wireless network connection that it will show up in network connections? Thank you very much for your help.

Issue Resolved. I did not turn on the wireless switch.

I need help. Can LiveCycle PDF Generator accept network print jobs from a PCL only source?

I need help. Can LiveCycle PDF Generator accept network print jobs from a PCL only source?

More information about this game:
The game should generate a random obstacle course for the player. The first column of the grid, however, should consist of all empty pieces, with the exception of the upper left-hand corner, which is the grid location where the player initially resides.
Enter a loop in which the following things happen (not necessarily in this order):
Print the current board configuration. Additionally, a key should be printed describing what each piece is.
Get an action from the user. The player can move up, down, left, or right. Use the following controls: up = 'i', down = 'm', left = 'j', right = 'k'. The player can move at most one block at a time. Of course, if the player tries to move into a spot occupied by an immovable block, the player will not move.
Inform the player whether they have won, or if they have lost (a player loses if they step on a bomb piece).
If the player types 'q', the game should terminate.
I am still stuck on this maze generator stuff.... Please help me....

HT1923 need help itunes store not open

i need help opening itunes store

Does it show any errors? If not just go on the uninstaller and look for itunes and click repair. It worked for me

Computers not showing on home share

I currently have 3 computers all on the same home share network. Two MacBook pros and a desktop pc. One MacBook shows each of the other computers. The other two computers only show the first MacBook and not each other.
I am at a loss for how to make all computers see one another. Any ideas?
Thanks!

1. Try turn Off Home sharing one at a time and turn it back On again.
2. If it doesn't help, switch internet security Off and do step 1 again.
3. If you still have Sharing problem, see links below
Understanding Home Sharing
http://support.apple.com/kb/HT3819
Trouble Shooting Home Sharing
http://support.apple.com/kb/TS2972

HELP! iPad not showing up when plugged in

Hi, I am getting really frustrated because my iPad first gen does not show up at all when plugged into my windows 8 laptop. There is no icon in the bottom right corner, no sound, nothing in my computer or iTunes. I've updated my iTunes and restarted everything, switched USB ports and cords... but the laptop is just not recognizing it. The laptop is new(I haven't synced the iPad to it before), but I have authorized it and there were no problems with my iPhone. I really need to connect my iPad to iTunes to update it, as the system is old and many apps are no longer supported. If anyone could help me I'd greatly appreciate it. Thank you!

Take a look at this http://support.apple.com/kb/TS1538
http://support.apple.com/kb/TS3716

HT1430 I need help I can not receive mail it says my mail box is full but I have cleared all my boxes. I have done as apple say shut down and restarted nothing. Also it say I need ios5 for some things don't know how to up grade. This all new to me so sim

I need help I can't receive mail as it says my mail box is full but all my boxes are empty. Simple terms please as I am new to this. Don't know how to find my os it keeps telling me I need iOS5 how do I do that.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this: Delete the account in Mail and then set it up again.
 Cheers, Tom

Plz. help,table does not show value for one field

hi all,
i have a really strange problem , i have a string field in access database that contains the date and time value,this field for some strange reason does not show in my table created through html,
i tried all combination(arranging the fields) ,renaming it w/o help, it shows the value using out.println(but then why is it not showing me in the table???)
plz. help ASAP.
the code is as under
<HTML>
<HEAD><TITLE> LOGGED IN ok</TITLE> </HEAD>
<BODY bgcolor = "yellow">
<%@ page import = "java.sql.*" %>
     <%! // declaring variables
String s = "";
java.sql.ResultSet rs=null,rs1=null,rs2=null;
java.sql.Connection con;
java.sql.Statement stmt,stmt1;
String empId = "",compid ="",calltype ="",probheader="",probdescription ="",probcomment ="",priority ="",a="";
%>
Following are the pending complaints ..
     <TABLE BORDER=1 CELLSPACING=0 CELLPADDING=0 width="100%">
     <TR>
     <TD> ComplainD </TD>
<TD> ComplainId </TD>
<TD> ProbHeader </TD>

</TR>
     <%
     try
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};" +"DBQ=c:/vishal/HelpDesk.mdb;DriverID=22;READONLY=false","","");
     //java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Portal");
          java.sql.Statement stmt = con.createStatement(java.sql.ResultSet.TYPE_SCROLL_INSENSITIVE,java.sql.ResultSet.CONCUR_READ_ONLY);
          s = "select * from Complains";
     java.sql.ResultSet rs = stmt.executeQuery(s);
                    while(rs.next())
                    //getting data from database
                                                       empId = rs.getString("EmpId");                    // out.print(" " + empId);
          compid = rs.getString("ComplainId");
          // out.print(" " + compid);
          calltype = rs.getString("CallType");
          // out.print(" " + calltype);
                    a = rs.getString("Complaindate"); //problem with this field
out.print(a); // prints value
          %>
                    <TR>
                    <TD> <%=compid %> </TD>
                    <TD> <%=calltype %> </TD>
                    <TD <%=a %> </TD>
                                   </TR>
<%
                    }//while loop
     %>
     </TABLE>
     <%
     }//try
          catch(Exception ep)
          out.println(ep);
          System.exit(1);
%>
</BODY>
</HTML>
value in database is as follows :-
Complaindate
5/18/2003 1:30:27 PM
5/18/2003 7:32:43 PM
5/18/2003 7:34:02 PM
5/18/2003 7:49:19 PM
5/18/2003 7:50:27 PM
5/18/2003 10:49:42 PM
5/18/2003 10:58:24 PM
thanking u ,plz ask if any further clarifications

Hi
I am seeing nothing wrong with ur code..
what about "view source" result.....plz check with that...
whether u r getting all the trs and tds...
revert back on this Issue..
Mars Amutha

I need help making my ipod show in itunes

I bought a used Ipod touch and it showes on my computer and itunes is on my computer and I have loaded some songs into itunes but I can't figure out how to tranfer the songs from itunes to my ipod maybe it is because I am old 50 that is

Connect the iPod to a USB port on the computer with the included cable. The iTunes software will probably open automatically but, if it does not, open it manually. Look at the pane on the left for "Devices" (see below). Select (highlight) your unit and then select the music tab and decide what music you want on the iPod (see below again).
If your iPod does not show up in iTunes, go here for troubleshooting procedure
http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.
Also, read this.

Need help troubleshooting Kernel panics

Hi,
I have had two Kernel Panics in two days just now, and another one a few weeks ago. The logs don't help me as I am not familiar with the wording on the Mac side, and I cannot submit the error reports to Apple as it fails, probably because I run 10.5.8 and Apple discontinued suppoort for Leopard or something like that. I would need help trying to figure out from the error message whether it is likely hardware, software, network, etc.
Here are the tope lines of the recent Kernel panic logs:
Thu May 3 10:23:12 2012
panic(cpu 1 caller 0x001AB0FE): Kernel trap at 0x00000000, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x010a8000, CR4: 0x00000660
EAX: 0x06b21480, EBX: 0x00001000, ECX: 0x00000000, EDX: 0x06c63b80
CR2: 0x00000000, EBP: 0x21d5bdb8, ESI: 0x00000000, EDI: 0x03112d80
EFL: 0x00010202, EIP: 0x00000000, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000010
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x21d5bb68 : 0x12b4c6 (0x45f91c 0x21d5bb9c 0x13355c 0x0)
0x21d5bbb8 : 0x1ab0fe (0x469a98 0x0 0xe 0x469248)
0x21d5bc98 : 0x1a1713 (0x21d5bcb0 0x1cda6e60 0x21d5bdb8 0x0)
0x21d5bca8 : 0x0 (0xe 0x48 0x707a0010 0x1cda0010)
0x21d5bdb8 : 0x7f78c6 (0x2c7d300 0x3112d80 0x0 0x1000)
0x21d5bde8 : 0xc9df27 (0x21d5be34 0x0 0x1000 0x0)
0x21d5be58 : 0xca37e1 (0x2b8c800 0x2a54d00 0x2b95500 0x0)
0x21d5be98 : 0xca28ba (0x2b62500 0x2a54d00 0x33606d1f 0x2b91a14)
0x21d5beb8 : 0xbf5c6a (0x2c06d00 0x2b95500 0x0 0x0)
0x21d5bef8 : 0xbf7332 (0x2b91a00 0x20 0x2b1c000 0x2b1c0dc)
0x21d5bf48 : 0xbf44d2 (0x2b91a00 0x2cc5500 0x1b2d6000 0x1)
0x21d5bf68 : 0x425d58 (0x2b97780 0x2b1cf20 0x21d5bf98 0x136efd)
0x21d5bf98 : 0x425a3a (0x2b97980 0x3184f00 0x46d46b0 0xa129b2)
0x21d5bfc8 : 0x1a14fc (0x2b97980 0x0 0x1a40b5 0x3d18208)
Backtrace terminated-invalid frame pointer 0
      Kernel loadable modules in backtrace (with dependencies):
         com.apple.iokit.IOAHCIBlockStorage(1.2.2)@0xc9b000->0xcacfff
            dependency: com.apple.iokit.IOAHCIFamily(1.5.0)@0xbeb000
            dependency: com.apple.iokit.IOStorageFamily(1.5.6)@0x7e6000
         com.apple.driver.AppleAHCIPort(1.7.0)@0xbf1000->0xbfcfff
            dependency: com.apple.iokit.IOPCIFamily(2.6)@0x5db000
            dependency: com.apple.iokit.IOAHCIFamily(1.5.0)@0xbeb000
         com.apple.iokit.IOStorageFamily(1.5.6)@0x7e6000->0x7fdfff
BSD process name corresponding to current thread: kernel_task
Wed May 2 13:25:06 2012
panic(cpu 0 caller 0x004312D7): "IOGMD: not wired for the IODMACommand"@/SourceCache/xnu/xnu-1228.15.4/iokit/Kernel/IOMemoryDescriptor.cp p:1311
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x2318b9b8 : 0x12b4c6 (0x45f91c 0x2318b9ec 0x13355c 0x0)
0x2318ba08 : 0x4312d7 (0x4a5ab4 0x0 0xc00bb3 0x2)
0x2318ba88 : 0x42b7ba (0x3cdaf80 0x3 0x2b84800 0x80)
0x2318bb68 : 0x42bdee (0x2b81680 0x42b2aa 0x2a 0x2318bbb0)
0x2318bbd8 : 0x42c500 (0x2b81680 0x2a 0x2318bc88 0x142281)
0x2318bc18 : 0xbe9c6d (0x2b81680 0x0 0x0 0x1000)
0x2318bc88 : 0xbed5a3 (0x2b71200 0x2b81680 0x3cdaf80 0x1000)
0x2318bcf8 : 0xbe35ef (0x2b71200 0x2b81680 0x2318bd28 0x42963b)
0x2318bd38 : 0xbe3fea (0x2b71200 0x2b81680 0x0 0xc9d5b3)
0x2318bd68 : 0xc97e50 (0x2b86980 0x2c01880 0x0 0x1a9ad9)
0x2318bda8 : 0xc933cb (0x2b72800 0x2a4b790 0x2318bde8 0x7ed8c6)
0x2318bde8 : 0xc93f4e (0x2b72700 0x2a4b790 0x1000 0x0)
0x2318be58 : 0xc997e1 (0x2b72700 0x2a4a340 0x2b81680 0x0)
0x2318be98 : 0xc988ba (0x2b72800 0x2a4a340 0x2318beb8 0x2b7123c)
0x2318beb8 : 0xbebc6a (0x2bf5e00 0x2b81680 0x0 0x0)
0x2318bef8 : 0xbed332 (0x2b71200 0x8000 0x0 0x2b774f0)
    Backtrace continues...
      Kernel loadable modules in backtrace (with dependencies):
         com.apple.iokit.IOAHCIBlockStorage(1.2.2)@0xc91000->0xca2fff
            dependency: com.apple.iokit.IOAHCIFamily(1.5.0)@0xbe1000
            dependency: com.apple.iokit.IOStorageFamily(1.5.6)@0x7dc000
         com.apple.driver.AppleAHCIPort(1.7.0)@0xbe7000->0xbf2fff
            dependency: com.apple.iokit.IOPCIFamily(2.6)@0x5db000
            dependency: com.apple.iokit.IOAHCIFamily(1.5.0)@0xbe1000
         com.apple.iokit.IOAHCIFamily(1.5.0)@0xbe1000->0xbe6fff
BSD process name corresponding to current thread: kernel_task
Fri Apr 13 14:35:28 2012
panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x00040000, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00040000, CR3: 0x0109f000, CR4: 0x00000660
EAX: 0x0532c280, EBX: 0x00001000, ECX: 0x00000000, EDX: 0x055ef580
CR2: 0x00040000, EBP: 0x21663db8, ESI: 0x00000000, EDI: 0x02deacc0
EFL: 0x00010202, EIP: 0x00040000, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000010
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x21663b68 : 0x12b4c6 (0x45f91c 0x21663b9c 0x13355c 0x0)
0x21663bb8 : 0x1ab0fe (0x469a98 0x40000 0xe 0x469248)
0x21663c98 : 0x1a1713 (0x21663cb0 0x1cda7760 0x21663db8 0x40000)
0x21663ca8 : 0x40000 (0xe 0x48 0x3db0010 0x1cda0010)
0x21663db8 : 0x7ed8c6 (0x2c5c400 0x2deacc0 0x0 0x1000)
0x21663de8 : 0xc93f27 (0x21663e34 0x0 0x1000 0x0)
0x21663e58 : 0xc997e1 (0x2bc2b00 0x2ba16e8 0x2ba8b00 0x0)
0x21663e98 : 0xc988ba (0x2b66700 0x2ba16e8 0x0 0x2baee2c)
0x21663eb8 : 0xbebc6a (0x2bddb80 0x2ba8b00 0x0 0x0)
0x21663ef8 : 0xbed332 (0x2baee00 0x800 0x21663fc8 0x198fa3)
0x21663f48 : 0xbea4d2 (0x2baee00 0x0 0x0 0x450)
0x21663f68 : 0x425d58 (0x2badc80 0x0 0x0 0x0)
0x21663f98 : 0x425a3a (0x2bade80 0x0 0x21663fc8 0x126204)
0x21663fc8 : 0x1a14fc (0x2bade80 0x0 0x1a40b5 0x2c8b880)
Backtrace terminated-invalid frame pointer 0
      Kernel loadable modules in backtrace (with dependencies):
         com.apple.iokit.IOAHCIBlockStorage(1.2.2)@0xc91000->0xca2fff
            dependency: com.apple.iokit.IOAHCIFamily(1.5.0)@0xbe1000
            dependency: com.apple.iokit.IOStorageFamily(1.5.6)@0x7dc000
         com.apple.driver.AppleAHCIPort(1.7.0)@0xbe7000->0xbf2fff
            dependency: com.apple.iokit.IOPCIFamily(2.6)@0x5db000
            dependency: com.apple.iokit.IOAHCIFamily(1.5.0)@0xbe1000
         com.apple.iokit.IOStorageFamily(1.5.6)@0x7dc000->0x7f3fff
BSD process name corresponding to current thread: kernel_task
Thanks,
Vincent

Some additional information which might help:
MacBook, 2 GHz Intel Core 2 Duo, 1GB DDR2 SDRAM
The last two kernel panics happened just as I hit "send" in Thunderbird, so it may be related. I fail to understand how such a simple command would crash a computer though.

I need help troubleshooting computers not showing up on network

Similar Messages

Maybe you are looking for