I need help with adobe iv reader.

iam trying to pin a website using ie.it says the reader cannot read the website,i am not computer saavy so i donot know how to fix this issue, pls help,tyvm.

i am trying to pin a website in internet explorer to my task bar,i get a
message that adobe v1 could not decode the website, i am not computer saavy
so i don't know what that means,plus this is a new computer 4 me.plus it
worked fine a few days ago. tyvm 4 ur help.
regards,
ray nist
In a message dated 6/11/2013 9:27:11 P.M. Eastern Daylight Time,
[email protected] writes:
Re: i need help with adobe iv reader.
created by Pat Willener (http://forums.adobe.com/people/pwillener) in
Adobe Reader - View the full discussion
(http://forums.adobe.com/message/5400013#5400013)

Similar Messages

Need help with Adobe Premiere Elements 2

I can drag a large high rez jpeg into timeline. Then when I click to playback....it gets more pixelated. That's a bad beginning. Then, when I go to export it, I've tried several extensions. All look bad during playback on YouTube. This should be pretty simple. High quality jpeg, but is fuzzy in movie. What's going wrong?

hi Bill -
ok fine. I have PSDs too. I tried what you said.
I put a PSD right beside a JPEG in the timeline. I rendered it (which I
didn't know to do because the instructions don't even mention it. The
instructions are terrible. Seems it leaves out a lot of info.)
So, then I click PLAY on my monitor. I see no difference between the PSD
and the JPEG yet. So, if I want to put this on YouTube, what's the best way
exactly, without gettting too technical? It looks like I have the choice
between Exporting in Mpeg or Quicktime or Windows Media. I think youtube
likes wmv.
From: Bill Hunt <[email protected]>
To: Tommy Midyette <[email protected]>
Date: 6/3/2010 10:01:24 AM
Subject: need help with Adobe Premiere Elements 2
>
When you drag the stills to the Timeline, there should be a red line
above them. Press Enter to Render the Timeline.
Â
Do not know the particulars of PrE 2, but in later versions, you can
Rt-click on the Program Monitor, and choose Magnification = 100%, rather
than Fit. You might have to resize your Program Monitor, but check at 100%.
Â
Also remember a few points:
Â
1.) You are looking at a DVD-quality image now, and that was designed
with low-rez CRT TV's in mind, and NOT hi-rez computer monitors. DVD vs
hi-rez sources and displays is probably less than what VHS vs DVD was, not
that long ago.
2.) You are looking at an emulation, a preview
3.) Your images have already been compressed to JPEG once, loosing
quality. That is why I always work in PSD, especially if there has already
been one JPEG compression, whether in camera, or in the image processing
stage. I keep JPEG either out of my workflow, or as limited, as is
possible. Some do not see the quality loss with JPEG compression, but I do,
and if I can create images that are as good as it gets, I know that my
clients will be happy.
Â
Good luck,
Â
Hunt
>

I need help with adobe muse sub-menu styling

i need help with adobe muse sub-menu styling~! i can adjust them to exactly how i like them, but then when i go to the next set of sub-menus, the other ones revert back to the starting white/black boxes. i am frustrated as i have redone this so many times! Please help me!

To achieve this, you can use an accordion widget with custum styling.
IF you search for Terry White, Muse, accordion, you will find some video tutorials on YouTube.

Need help with Adobe Interactive Form Saving

Hi Gurus,
I need your help with Adobe Interactive form saving.
I have written the code in pre-save event to prompt a message when user didn't enter any value before saving. The form data should not be saved upon clicking save (Just prompt the message and exit form the form). Can u please advice me how to do this.
Regards,
Srini

see the link: http://forms.stefcameron.com/2008/04/
it says:
preSave: Failed validations will not prevent the form from being saved however Acrobat/Reader will issue a special warning message, after issuing the validation error message, to inform the user that the validations failed. Iu2019m guessing this is because the user may be saving the form to continue filling it at a later time so the save canu2019t be completely prevented.
regards,
BJagdishwar.

Need help with Adobe Reader 9

About three weeks ago my computer started acting crazy so I tried to run updates but I could not get on the internet because the comcast guy told me that it was my firewall. So I disabled my firewall and put on windows firewall and was able to do my updates, but then my antivirus quit working so then I uninstalled it and tried to reinstall but I could not. So I got mad and tried to restore to my last restore point but it would not let me, so when I went to run check disk Windows popped up and said it could not perform this action because the disk was busy.So I then called my friend whorepairs computers and he came over and ran combofix and installed a new antivirus. Combofix said nothing was wrong, but I still can't do system restore or checkdiscso I ran MalwareBytes and it comes up with nothing. So now all of a sudden Windows is telling me that Adobe reader 9 is corrupt and unreadable. Everytime I try to uninstall it, it won't let me. Everytime I try to install a newer version I can't because a pop up comes up and says I alredy have the file, but I can't use it to read my PDFs for class. Adobe reader 9 is messing my computer up and I need help removing it?

Hello,this is me again. I ran Windows install utility cleanup and basically uninstalled all Adobe files, but when I was done I went into the program files on C drive to delete Adobe file and it gave me an error that said: An unexpected error is preventing the operation.Make a note of this error code,which might be useful if you get additional help to resolve this problem.Error 0x80070091: The directory is not empty. And I still cannot run check disc because it tells me that the disk is busy.

I need help with Adobe Reader X......

I'm not sure what is going on, but for a while now (seems like the last two updates to Reader) my Adobe Reader is acting nuts......!!
First of all, I can not seem to get it to work. When I pull up a .pdf file, I can see the file but then when I try to scroll through the various pages I then get an error message that states something about a memory not being able to be read.
Second of all, if and when I can get a file to eventually stay up on the screen, I can not print it. I get another error message stating the there are no pages selected. What.......? This doesn't make sense. Oh, and I tried the "click on advanced and the image thing." Nothing.
What's up with Adobe? Do they realize that hundreds of thousands of us are having troubles out here? Do they really want this product to be downloaded on people's computers? The new version of Reader doesn't work and is crap.........
I couldn't even see and print my Federal Income Tax Return this year because Reader wouldn't let me.
I would add images, but when I attempt to do so I get an error message stating that "an unexpected error has occurred." Do you think?
I tried the "repair" function off of the 'help' button and the control panel as suggested in the webpage, NOTHING....... So many governments, companies, and entities using pdf files for their communications and an idividual can not open them, print them, read them, or use them. What's wrong with this picture?
Is there anyone out there that can help me get my Reader to work? Am I the only one having troubles? Please HELP......!!

Moved to Adobe Reader.
You cannot able to open pdf files on your computer or you cannot open pdf files in your webbrowser? If you cannot open pdfs in your browser, what browser are you using?

Need help with Adobe Reader XI

I am using Windows 7, IE10, and Adobe reader XI. I can not currently open and view bank card statements, but can view all other statements on the same sight. It has to be one of my settings because when opened on my Ipad everything works fine. Can anyone help?

According to Microsoft:
Here are a few methods you can try out.
Method 1: Disable Add-Ons
c) Click the ‘Tools’ button, and then click ‘Manage add-ons’.
d) Disable the add-ons by clicking them one at a time to highlight them and then click on disable button.
e) Re-enable the add-ons one by one and check with which Add-on you get this error message.
f) Disable the Add-on causing the problem.
Method 2: Reset security settings for Internet Explorer
If you configure security settings to be too restrictive, you may prevent Internet Explorer from displaying certain Web sites. To determine whether an issue is caused by overly restrictive security settings, revert to default security settings. To do this, follow these steps:
a.     Open Internet Explorer.
b.     Click Tools, and then click Internet Options.
c.      Click the Security tab.
d.     Click Reset all zones to default level, and then click OK.
Method 3: Run the Internet explorer performance troubleshooter and check if it helps.
a)    Press the ‘Windows + W’ key on the keyboard.
b)    Type troubleshooter in the search box and then press enter.
c)    Select Troubleshooting. Click on view all and select Internet explorer performance.
d)   Click next and follow the on-screen instructions.
Method 4: Reset Internet Explorer 10.
a) Drag the mouse to the bottom right corner and click on search.
b) Click on ‘Settings’ and type ‘Internet Options’.
c) Click on Internet Options and click on ‘Advanced tab’
d) Click ‘Reset’ and click ‘OK’.
Note: Please note that running Reset Internet Explorer Settings will reset all user-defined settings including those set by installed extensions, toolbars and other add-ons to IE Defaults. This includes all Security, Privacy and Zone settings. Also this will clear browsing history, delete all temporary Internet Files, cookies, form data and especially all stored passwords.
Method 5: uninstall the Adobe Acrobat Reader and install the latest version.
Follow the link below to download the latest version:
http://get.adobe.com/reader/otherversions/
Also, if you have multiple Adobe Readers installed, uninstall them all then install the latest version.
Adobe doesn't support multiple versions of Reader or Acrobat on the same computer. Multiple versions simultaneously installed can lead to software conflicts and errors. Uninstall all versions of Reader or Acrobat and then reinstall only one version of the product.

Need help using adobe digital reader with screen reader software

I am helping my father, who is blind, and uses Window-eyes screen Reader software, which reads his computer screen to him in an audio voice. We just bought an ebook, downloaded adobe digital reader, but his window-eyes software will not read the book to him when we have it displayed on his computer screen. Is there a solution to this?
Thanks

Thanks for the response. So, I see that my answer does not lie with Adobe--I will pursue the solution elsewhere, if anyone here has some further advice as to what the solution is, please let me know.
Thanks again.

I need help with adobe reader can someone please tell me what to do?

I am having a problem with Adobe Reader 9.3.2 When I try to install, it
begins installing, but then stops and the error messagy states
"Adobe download manager is currently installing an application,
Once installation is complete stop installing all other
applicaitons." I don't know why I am getting this message. I am unable to read
any PFD files, I am unable to uninstall download mgr or Adobe Reader.
Both show up on my add/remove program, but when I try to remove Reader
I get the message that "this path package could not be opened. Verify that the
path packae exists and that you can access it" I have no idea how do to this.

Use the executable installer without download manager
Reader 9.3: http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3/enu/AdbeRdr930_en_US.msi
update 9.3.1: http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3.1/misc/AdbeRdrUpd931_all_incr.msp
update 9.3.2: http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3.2/misc/AdbeRdrUpd932_all_incr.msp

Need Help With Adobe Photoshop Elements 2.0

I have and use Adobe Acrobat and three versions of Adobe Photoshop Elements (2, 5 and 7). I use version 2 frequently as I'm more familiar with it and it's simpler to use for what I need to do. All was fine until recently when my computer was installed with Windows 8. Now I can't save photo edits from Version 2.0...... it aborts each time I try. Why is that? It is costing me a lot of wasted time. The other versions that i have don't do that. Need help. Thanks. Stu Snyder.

The first thing i would try is deleting the Photoshop Elements 2.0 Prefs folder as explained in the post #2 linked to below:
http://forums.adobe.com/thread/1254224?tstart=30
Does it happen when trying to save as any file format or just a certain one like jpeg?
Have you tried saving a photo to a different place like your desktop?

NEED HELP WITH ADOBE DOWNLOAD ASSISTANT

EVERYTHING I TRY TO DOWNLOAD MY TRAIL VERSION OF ADOBE AFTER EFFECTS CS5. OK THE ADOBE DOWNLOASD ASSISTANT DOWNLOAD. BUT WHEN I CLICK IT. IT OPENS A NEW FOLDER THAT HAVE THE ADOBE ASSISTANT IN IT. SO I CLICK ON THE ASSISTANT . AND IT ASK ME DO I WANT TO OPEN IT, I CLICK YES. AND THEN IT COMES ON MY DOCK. AND THEN AFTER I CLICK OPEN. IT JUST DISAPEAR FROM MY DOCK. AND DON'T OPEN. I HAD IT WORKING LAST NIGHT.
I TRY TO DOWNLOAD IT OVER.
I NEED HELP QUICK. I HAVE A PROJECT DUE TOMMORROW. PLEASE HELP

Yeah, right. I spent an hour trying on 'chat' and got nowhere. They don't seem to know anything about the dl assistant.
I tried to install from here:
http://www.adobe.com/cfusion/tdrc/index.cfm?product=flash
the dl assistant comes up and it downloads cs5 flash pro and then prompts me that my system is due for a 'restart' which I select 'ignore'. Then it starts the installation and part way thru it prompts me to terminate ie and chrome. Okay, soon as I do that the installation terminates altogther and I have to start all over. Since it takes a long time to dl each time, all i want to know is where did the 'exe' go. when the install starts it seems to be running something called pdapp. i can't find the trial exe. i did this yesterday with the flash builder and everything worked as expected but it looks to work completely diff with flash pro. Why??? Where is the exe?

Need help with Adobe error

I am taking an online course that has the class information on its website as PDF files. I am using Adobe Reader Ver 9.3. When I attempt to open the PDF files, I get an error that states "The Adobe Acrobat/Reader that is running can not be used to view PDF files in a Web browser. Please exit Acrobat/Reader and exit your web browser and try again."
I have opened Acrobat/Reader in its own window and attempted to open the file again and the same error comes up.
Since these files contain the information I need to learn for the class, it is imperative I can open these files. Any help would be appreciated.
Thank you in advance.

This is the Acrobat forum, not the Reader forum. However, you should be able to right click on the files and download them to disk. Then simply open them locally. I am not sure what your problem may be - possibly a browser issue.

Need help with Adobe XI

I have the free version on Adobe XI on my relatively new HP computer. Part of my freelance job entails downloading and editing PDFs. When I do so, I always get a notice that the document may not display correctly, and, indeed, I frequently get color blocks that cover type or photographs. This does not happen on my old, old laptop with Adobe Acrobat 5. My old laptop, however, doesn't have the editing software I need. What can I do to get XI to display correctly?

Thank you. I made Adobe Reader my default viewer, and it works perfectly. I wish I had asked sooner, but I’m good to go now. Thanks again.

Need help with adobe flash player 10.2 keeps crashing

ok i am having a problem with the adobe flash player ten it keeps crashing on firefox ie8 and google chrome
operating system is windows xp 32 bit
really need help because this has been going on for 3 weeks straight and i downloaded the adobe flash player from the adobe site
i have uninstalled it 3 time and reinstalled it 3 time
need help ASAP!!!!!!!!!!!!!!!!!

Hello,
Please try the following way:
1.Open "Start", then in the "Start Search" bar input "regedit", then click "Enter"
2.In the opened "Registry Editor", find the key "HKEY_LOCAL_MACHINE -> SOFTWARE -> Macromedia -> FlashPlayer -> SafeVersions" and delete it.
3.Download the latest Flash Player from http://get.adobe.com/flashplayer/, and install it.
Thanks

I need Help with Adobe 11.1

I recently purchased a V.Reader. It requires the download of Adobe Flash Player 11.1. I have downloaded it, and it appears in my program area, however when I try to open the learning lodge Navigator, it still tells me I need to Download Adobe Flash Player...
Can someone Please help???

what does the dotted circle mean?: Apple Support Communities
What does the gray dotted circle in...: Apple Support Communities

I need help with adobe iv reader.

Similar Messages

Maybe you are looking for