I need help with CSS and floating

Okay, I know I need to get up on CSS and get rid of tables in
my sites.
However, I'm running up against a problem, and after banging
my head
against it for a while, I realize I need help. I've stripped
this down
so as to only show the area where I'm having difficulty.
What I want is a page that has everything down the center,
taking up no
more than 750 pixels and no more than 550 pixels of width. No
problem there.
After the header and the top content, I'd like to have two
"columns",
each in it's own separately-colored box. I would like the
right-side
column/box to be a static size, while the left-side
column/box sizes
dynamically.
Where I'm having problems is that when one column is boxed,
it's fine,
but whenever I wrap each column in its own box, the
fixed-size box
either jumps below or above the other box (depending on which
one has
been floated and which order the div's appear in the code).
Here are the links:
CSS:
http://www.afice.org/stylesheet/floatmestyles.css
ex 1:
http://www.afice.org/floatme1.html
ex 2:
http://www.afice.org/floatme2.html
Before sending, I took a look again, just to see if I was
missing
anything. I did notice that it doesn't seem to be that the
box is
jumping down so much as it is that it's getting written over.
Anyway, sorry for the long-winded explanation. I hope I've
managed to
explain what I'm trying to do well enough that someone can
tell me where
I'm going wrong.
Thanks,
--Kevin

Do you want something like this:
http://www.pmob.co.uk/temp/spointfooter.htm
You will need to look at the code to see how it was done.
Otherwise, there are different examples here on Pauls' site:
http://www.pmob.co.uk/temp/3colfixedtest_4.htm
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.perrelink.com.au
- Web Dev
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.adobe.com/devnet/dreamweaver/css.html
"Kevin D-R" <[email protected]> wrote in
message
news:[email protected]...
> Okay, I know I need to get up on CSS and get rid of
tables in my sites.
> However, I'm running up against a problem, and after
banging my head
> against it for a while, I realize I need help. I've
stripped this down so
> as to only show the area where I'm having difficulty.
>
> What I want is a page that has everything down the
center, taking up no
> more than 750 pixels and no more than 550 pixels of
width. No problem
> there.
>
> After the header and the top content, I'd like to have
two "columns", each
> in it's own separately-colored box. I would like the
right-side column/box
> to be a static size, while the left-side column/box
sizes dynamically.
>
> Where I'm having problems is that when one column is
boxed, it's fine, but
> whenever I wrap each column in its own box, the
fixed-size box either
> jumps below or above the other box (depending on which
one has been
> floated and which order the div's appear in the code).
>
> Here are the links:
>
> CSS:
http://www.afice.org/stylesheet/floatmestyles.css
>
> ex 1:
http://www.afice.org/floatme1.html
>
> ex 2:
http://www.afice.org/floatme2.html
>
> Before sending, I took a look again, just to see if I
was missing
> anything. I did notice that it doesn't seem to be that
the box is jumping
> down so much as it is that it's getting written over.
>
> Anyway, sorry for the long-winded explanation. I hope
I've managed to
> explain what I'm trying to do well enough that someone
can tell me where
> I'm going wrong.
>
> Thanks,
>
> --Kevin

Similar Messages

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Need help with JTextArea and Scrolling

import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020

What's the problem you're having ???
PS.

Need help with trim and null function

Hi all,
I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
Thanks

Hi,
Thanks for the reply. What am I doing wrong?
SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
(AL1.user_data_text,'XX')
FROM Table
I want the XX to appear in the same column as the
trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
What you're saying is:
SELECT trim ( SUBSTR (AL1.user_data_text, 1, 3))
,       NVL ( AL1.user_data_text, 'XX' )
FROM    Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
SELECT NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
            , 'XX'
FROM    Table

Need help with INSERT and WITH clause

I wrote sql statement which correctly work, but how i use this statment with INSERT query? NEED HELP. when i wrote insert i see error "ORA 32034: unsupported use of with clause"
with t1 as(
select a.budat,a.monat as period,b.vtweg,
c.gjahr,c.buzei,c.shkzg,c.hkont, c.prctr,
c.wrbtr,
c.matnr,
c.menge,
a.monat,
c.zuonr
from ldw_v1.BKPF a,ldw_v1.vbrk b, ldw_v1.bseg c
where a.AWTYP='VBRK' and a.BLART='RV' and a.BUKRS='8431' and a.awkey=b.vbeln
and a.bukrs=c.bukrs and a.belnr=c.belnr and a.gjahr=c.gjahr and c.koart='D'
and c.ktosl is null and c.gsber='4466' and a.gjahr>='2011' and b.vtweg='01'
,t2 as(
select a.BUKRS,a.BELNR, a.GJAHR,t1.vtweg,t1.budat,t1.monat from t1, ldw_v1.bkpf a
where t1.zuonr=a.xblnr and a.blart='WL' and bukrs='8431'
,tcogs as (
select t2.budat,t2.monat,t2.vtweg, bseg.gjahr,bseg.hkont,bseg.prctr,
sum(bseg.wrbtr) as COGS,bseg.matnr,bseg.kunnr,sum(bseg.menge) as QUANTITY
from t2, ldw_v1.bseg
where t2.bukrs=bseg.bukrs and t2.belnr=bseg.BELNR and t2.gjahr=bseg.gjahr and BSEG.KOART='S'
group by t2.budat,t2.monat,t2.vtweg, bseg.gjahr,bseg.hkont,bseg.prctr,
bseg.matnr,bseg.kunnr
,t3 as
select a.budat,a.monat,b.vtweg,
c.gjahr,c.buzei,c.shkzg,c.hkont, c.prctr,
case when c.shkzg='S' then c.wrbtr*(-1)
else c.wrbtr end as NTS,
c.matnr,c.kunnr,
c.menge*(-1) as Quantity
from ldw_v1.BKPF a,ldw_v1.vbrk b, ldw_v1.bseg c
where a.AWTYP='VBRK' and a.BLART='RV' and a.BUKRS='8431' and a.awkey=b.vbeln
and a.bukrs=c.bukrs and a.belnr=c.belnr and a.gjahr=c.gjahr and c.koart='S'
and c.ktosl is null and c.gsber='4466' and a.gjahr>='2011' and b.vtweg='01'
,trevenue as (
select t3.budat,t3.monat,t3.vtweg, t3.gjahr,t3.hkont,t3.prctr,
sum(t3.NTS) as NTS,t3.matnr,t3.kunnr,sum(t3.QUANTITY) as QUANTITY
from t3
group by t3.budat,t3.monat,t3.vtweg, t3.gjahr,t3.hkont,t3.prctr,t3.matnr,t3.kunnr
select NVL(tr.budat,tc.budat) as budat,
NVL(tr.monat,tc.monat) as monat,
NVL(tr.vtweg,tc.vtweg) as vtweg,
NVL(tr.gjahr, tc.gjahr) as gjahr,
tr.hkont as NTS_hkont,
tc.hkont as COGS_hkont,
NVL(tr.prctr,tc.prctr) as prctr,
NVL(tr.MATNR, tc.MATNR) as matnr,
NVL(tr.kunnr, tc.kunnr) as kunnr,
NVL(tr.Quantity, tc.Quantity) as Quantity,
tr.NTS as NTS,
tc.COGS as COGS
from trevenue TR full outer join tcogs TC
on TR.BUDAT=TC.BUDAT and TR.MONAT=TC.MONAT and TR.GJAHR=TC.GJAHR
and TR.MATNR=TC.MATNR and TR.KUNNR=TC.KUNNR and TR.QUANTITY=TC.QUANTITY
and TR.VTWEG=TC.VTWEG and TR.PRCTR=TC.PRCTR
Edited by: user13566113 on 25.03.2011 5:26

Without seeing what you tried it is hard to say what you did wrong, but this is how it would work
SQL> create table t ( n number );
Table created.
SQL> insert into t
2 with test_data as
3    (select 1 x from dual union all
4     select 2 x from dual union all
5     select 3 x from dual union all
6     select 4 x from dual)
7 select x from test_data;
4 rows created.
SQL>

Noob needs help with Logic and Motu live setup.

Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
Chris

You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

Need help with mac and java

Hi, I'm trying to develop an application on a Machintosh OSX 10.2.8 machine.
I'm having a herrendous time trying to get quicktime to work on it.
I've somehow managed t oget 1.3.1 and QTJava.jar to work together but now i need encryption, however that requires 1.4+
Now 1.4.1 doesnt work with quicktime
I've downloaded the latest software upgrades but Ive got no idea how to set up quicktime to work with java 1.4.1
Now to add on top of that mac reports it can use AES encryption. this is from source code ripped striaght from this website.
But first and foremost can anyone, annyonee help me out with setting up 1.4.1 with quicktime?
Thank you

If you need encryption with Java 1.3.1, download the JCE from either Sun (http://java.sun.com/products/jce/) or Bouncy Castle (http://www.bouncycastle.org/).
Cheers,
--Arnout

Beginner needs help with css layout

i'm new to using dw (cs3) and css, though i have some
background in html and coding. i'm creating a page using the "one
column elastic, centered, header and footer" layout and i have a
banner header with a horizontal spry menu bar at the bottom of the
header. the background color of the buttons on the menu bar is red,
and there's a yellow 5px border on the top and bottom of the red
menu bar, so it looks like there's red bar with yellow piping above
and below it, and this bar is between the header and body section
of the page. i've set these colors in the "ul.MenuBarHorizontal a"
rule.
now, the issue i have is that my menu bar does not extend
across the entire column, so there's empty space to the right of my
menu bar (between the end of the menu bar and the far right
column). i'd like the look of the red and yellow menu bar to extend
all the way across, but i can't figure out how to do this in css.
do i:
extend the menu bar all the way across the width of the page?
i can't figure out how to do this.
insert an image to make it appear as though the red and
yellow bar keeps extending to the right? if so, how will that image
remain elastic along with my page?
or is there a better solution?
i'm very new to css and i'm doing my best to figure out how
everything fits together. the last web site i built was in 1997 and
it was done in notepad. any help would be tremendous. i'm in
kinshasa, in the democratic republic of congo, and truth be told
there aren't a lot of dw gurus out here.
thanks in advance...

Can you post a link to your page, please?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"charliemooreiv" <[email protected]> wrote
in message
news:[email protected]...
> i'm new to using dw (cs3) and css, though i have some
background in html
> and
> coding. i'm creating a page using the "one column
elastic, centered,
> header
> and footer" layout and i have a banner header with a
horizontal spry menu
> bar
> at the bottom of the header. the background color of the
buttons on the
> menu
> bar is red, and there's a yellow 5px border on the top
and bottom of the
> red
> menu bar, so it looks like there's red bar with yellow
piping above and
> below
> it, and this bar is between the header and body section
of the page. i've
> set
> these colors in the "ul.MenuBarHorizontal a" rule.
>
> now, the issue i have is that my menu bar does not
extend across the
> entire
> column, so there's empty space to the right of my menu
bar (between the
> end of
> the menu bar and the far right column). i'd like the
look of the red and
> yellow menu bar to extend all the way across, but i
can't figure out how
> to do
> this in css.
>
> do i:
>
> extend the menu bar all the way across the width of the
page? i can't
> figure
> out how to do this.
>
> insert an image to make it appear as though the red and
yellow bar keeps
> extending to the right? if so, how will that image
remain elastic along
> with
> my page?
>
> or is there a better solution?
>
> i'm very new to css and i'm doing my best to figure out
how everything
> fits
> together. the last web site i built was in 1997 and it
was done in
> notepad.
> any help would be tremendous. i'm in kinshasa, in the
democratic republic
> of
> congo, and truth be told there aren't a lot of dw gurus
out here.
>
> thanks in advance...
>

Need help with font and bug with properties inspector bug

Hey guys,
I recentely bought a account at dreamtemplate and i'm working on creating my first website, ive got the basic down but whenever i want to change the font of one character in a word( lets say the k in kind to a different font) it switched the entire word or sentence to that font. ive contacted dreamtemplate about it and this is the solution they gave me but i dont understand it:
To change the font, you need to put the TrueType font files of edwardian and Kunstler in the font file of the template folder.
You may change the font of one character in a word as below.
For example:
In the HTML file,
<h2 class="title"><span class="newfont">l</span>atest </span> <span >projects</span></h2>
In the CSS file,
@font-face {
font-family: 'Kunstler';
src: url('/fonts/Kunstler/Kunstler Script.eot');
src: url('/fonts/Kunstler/ds-digi-webfonteot?#iefix') format('embedded-opentype'), url('/fonts/Kunstler/Script.woff') format('woff'), url('/fonts/Kunstler/Kunstler Script.ttf') format('truetype'), url('/fonts/Kunstler/Kunstler Script.svg#ds-digi-webfont') format('svg');
.newfont{font-family: 'Kunstler'!important;}
Feel free to contact us if you need any further assistance.
if anyone can shed some light and knowledge on how to apply it that would be amazing.
Also another problem i've been experiencing is that whenever i edit something in an html file (index.html) and save it and view it none of the changes show up besides the change in words(ie. no font change, no size change) but pictures are fine.
Now my last which has bothered me a lot latly is an issue with my propertie inspector box, It works fine with an html file but whenever i try to edit a .js file it either goes blank or is greyed out, i've searched for solutions and have made sure im not in live mode, but no luck, i even reinstalled DW, still no luck. I need to edit a menu bar that is a .js and i cant do it with this issue. if anyone needs further info let me know.
thanks in advance

Before you get any deeper with this, you really need to learn all you can about HTML code and it's relationship with CSS. Otherwise you will be forever confused, frustrated and incapable of understanding the answers we give you.
HTML, CSS Tutorials -
http://w3schools.com/
http://www.csstutorial.net/
http://phrogz.net/css/HowToDevelopWithCSS.html
When you have a firm grasp of the fundamentals, spend a few hours doing this 5-part tutorial on how to use DW. It's time well spent.
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
Incidentally, you cannot edit JavaScript with the HTML properties inspector. To edit JavaScript, switch to Code View.
Nancy O.

Day one of my new MacBook Pro & I desparately need help with calendar and email

It's day one of my new relationship with a Mac, and I need help! I'd like to use microsoft exchange to sync my calendars to iCal & my emails the way I currently do with my iPhone 4 and iPad 2. The problem is that all I get are error messages. They either say that communication with the server cannot be established or communication to ports 80 & 440 cannot be established. One account I'd an ssl and the others are gmail. Please advise!

anyone? please? i would appreciate any information.

Need help with GetStringUTFChars and JAB

Please help,
I want to use the JNI function GetStringUTFChars with JAB (Java Access Bridge), without having to call JNI_CreateJavaVM as no matter what I do, JNI_CreateJavaVM fails. I have JAB successfully loaded, and I have used GetAccesibleFromHWND to get a valid jobect. Is there any way I can go from the jobect to use GetStringUTFChars?
If not, is the source code availabe for GetStringUTFChars? OR is there an Windows/C++ equivalent available?

RPhilbrook12, you've reached the right place for information regarding how to suspend your line while you're deployed. Are you being deployed for military purposes? If you have received military orders to relocate for 90 days or more to an area where Verizon Wireless doesn’t provide coverage and you need to suspend your service, you can contact us at 800-922-0204. You will need to be prepared to provide information from your orders, including where you’ll be stationed and the name and rank of your Commanding Officer. Please be advised that your service can be suspended for up to 3 years for military deployment.
For more details regarding your options to suspend services, click http://vz.to/1lfmyUI
LasinaH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Hey guys i need help with facetime and i am ready to blow up!

I got some many ppl telling me that i have to pay for facetime! My dad got iphone 4 and we live in canada (calgary) My brother lives in Australia and i have mac! Is facetime free to talk to him! Telus is telling us that it will cost my dad 2 dollars a min then Rogers is telling us it is free! I need help cause if both have wifi it should be free! We want to know! Please let me know! thanks! I am ready to blow up here LOL!

All FaceTime calls are over WiFi, thus they are "free", unless you're using a WiFi hotspot that charges for its use.

Need help with backup and clean install

Need Assistance with G5
Background
I'm an inexperienced Mac user with a G5, twin 2.0 gig processors and 1.5
gig ram. The OS is v10.3.6. It is the latest OS that will not slow down
internet (Safari/Mail) applications. Anything newer has really slowed internet applications down big time.
Current Problem
I've probably messed up my hard drive by switching back and forth
(archive/install) from newer to present OS. I now have corrupted data and
while my Mac is useable, several things do not work (disk utility, printing
and possibly more). I have a mixture of new and older versions of
these applications/utilities in my OS.
Going Forward
I believe I need to wipe out my hard drive and do a clean install. I also have a Mac mini which I can use (I believe) for backup via firewire.
Backup
Is everything I need to backup in the "User" folder? My spouse and I have
separate accounts and a shared account on the same Mac, with a total of 8.5 gig of data, mostly photo's and music. We want to save that and the usual preferences and favorites/bookmarks/addresses/email, etc. It would be nice if all I had to do was drag the user folder into the target drive.
I'd appreciate any assistance. I have more questions which I'll get to later, but I need to start somewhere.
Thanks all
Mac G5

Backing up your Users folder will save everything in all the accounts on the computer including pictures, music, preferences, etc. as long as they were kept in that folder.
If you have File Vault turned on you should turn it off. The "correct" procedure for transferring to your Mac Mini is as follows:
1. Turn both computers off. Connect them together with a Firewire cable.
2. Boot the G5 into Target Disk Mode.
3. Then boot the Mac Mini normally. The G5's hard drive should be present on the Mini's Desktop.
4. Create a new folder on the Mini and name it something appropriate like G5 User Backup. Drag the Users folder on the G5 into this new folder on the Mini.
After the transfer completes you should verify that everything has been transferred and is there in the folder.
5. Drag the G5's hard drive icon from the Desktop to the Trash or CTRL-click on its icon and select Eject from the contextual menu.
6. Shutdown the G5 and remove the Firewire cable connecting the two computers.
You can now proceed to fix the G5. Because you are planning to erase the hard drive I would like to suggest you do an extended format to prep the hard drive properly for your restoration:
1. Boot from your Panther Installer Disk. After the installer loads select Disk Utility from the Installer menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
You can then quit Disk Utility and return to the installer. Now proceed to reinstall OS X. Be sure you set up your accounts with the exact same usernames and passwords as you used before.
Once you have completed your reinstallation on the G5 you can restore your Users folder from the Mac Mini.
1. Shut down both computers. Connect them with a Firewire cable.
2. Boot the G5 into Target Disk Mode.
3. Boot the Mac Mini normally. G5's hard drive should appear on the Mini's Desktop.
4. Open a Finder window on the G5's hard drive and drag the Users folder to the Trash (don't delete yet.)
5. Now copy the saved Users folder from the Mac Mini to the G5 (only the Users folder, not the folder in which you stored it.)
6. Eject the G5's hard drive from the Mini's Desktop and shut down the G5.
7. Disconnect the Firewire cable.
Now restart the G5. If all worked well it should start up normally and you should find everything normal in your accounts.
There is one potential problem in all the above. All your account preferences are contained in the Users folder. If you have any corrupted preferences, they will still be corrupted and may continue to cause problems. If that's the case you may need to trash the /Home/Library/Preferences/ folder's contents. Hopefully, this won't be the case, but you should be aware of the possibility.
If eveything is working normally you can empty the Trash and delete the contents. Same on the Mac Mini.

Need help with buttons and fading clips

howdy,
I have 3 buttons on a stage that play 3 different movies.
While no button is pressed, there is a looping video on the stage
playing. When a button is pressed, that looping movie needs to fade
out and fade in the movie that button calls for. I have attached
script but it isn't working at all. Not sure where to go from here.
thanks for your help.

Hello again,
Now I'm completely lost. Where should I add that code in your
last post?
thanks.

I am a rookie and need help with max and min values

Hello all, i am into this intro to java class. my assignment is to write a program that prompts the user for two integers and then prints the sum, difference, average, product , distance (absolute value of the difference) Maximum(largest of the two) and Minimum(smallest fo the two) here is my code so far
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.lang.Math;
public class Sample4
   public static void main(String[] args) throws IOException
      try // attempt the following
{           // create the stream to read from
InputStreamReader istream = new InputStreamReader(System.in);   // create a buffer to hold the stream
BufferedReader console = new BufferedReader(istream);           // prompt the user
      System.out.println("Enter a number please");              // get input as a string
      String input = console.readLine();                        // convert to an integer
      int num1 = Integer.parseInt(input);
      System.out.println("Enter a number please");              // get input as a string
      String input2 = console.readLine();                       // convert to an integer
      int num2 = Integer.parseInt(input2);
      int sum = num1 + num2;                                    // get the sum of the two inputs
      int difference = num1 - num2;                             // get the difference of the two inputs
      int product = num1 * num2;                                // get the product of the two inputs
      int average = sum / 2;                                    // get the average of the two inputs
      int abs = Math.abs(difference);                           // get the absolute value of the two inputs
          // new section
             // display the number
      System.out.println("The total sum = " + sum);
      System.out.println("The total difference = " + difference);
       System.out.println("The total product = " + product);
       System.out.println("The total average = " + average);
       System.out.println("The total absolute value = " + abs);
} // if something breaks, catch the exception
catch (IOException e)
   System.out.println(e); // displays the exception
   System.exit(1); // quits the program
}what will be the right syntax or code to find the MAX and MIN values of two numbers a User Inputs, hope someone can help with this. thank you for your help.

Thanks alot man, sheesh i do not know why my book
doesnt give me all the static methods. but i do really
appreciate your help. peaceA complete list of the java.lang.Math methods can be found at http://java.sun.com/j2se/1.4/docs/api/java/lang/Math.html
btw,
max(a, b) == (a > b) ? a : b
min(a, b) == (a < b) ? a : b

I need help with CSS and floating

Similar Messages

Maybe you are looking for