I need help with exporting 720p video for youtube.

Hi everyone, I have been using Adobe premeir for almost a year now and I love it, as its very professional and powerful. I used to edit Standard with no problem, then export the full unconverted file (wmv) and run it though Windows Movie Maker to compress it (haha yeah I know its crazy.) Now that I got a camera capable of shooting HDV I want to use it. Im just wondering the following:
1.What format should I export with in Adobe Media Encoder? (Original Raw footage files from Camera are MOV formatted)
2.What should I set the Bitrate to?
3.How do I export to flash without it being to large of a file (Under 200mb's for a 5 minute video) and have it not choppy or pixelated?
4.How do I speed up exporting, how many passes should I do?
5.What overall is the best setup for youtube?
I also noticed a small glitch, and its when I export normally (full size, no compression) and run it though a compressor it cuts out all of the titles, and just flashes them for a milisecond. Its really odd. It only happens when I export in a certain format in which I cannot quite remember. Anyways.. thanks in advance for helping me. Its very appreciated.
NineLivesProductions

perform a search using the term export for web and it should throw up some ideas.
here's one for starters:
http://discussions.apple.com/thread.jspa?messageID=2309121&#2309121
If you're using flip4mac to convert to wmv, the trial stops at 30 seconds - you need at least wmvstudio to export to wmv:
http://www.flip4mac.com/wmv.htm

Similar Messages

  • Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers,  threw programs away,  only have Adobe Acrobat X Standard,  need a code to unlock program?

    Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7. 

    You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

  • I think I need help with driver (software) settings for D110a

    I think I need help with driver (software) settings for D110a all-in-one
    Product: D110a all-in-one
    OS: Windows XP Professional
    Error messages: None
    Changes before problem appeared: None--new installation
    The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
    IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
    When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
    least acceptable, Some would probably say good or very good.
    It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
    out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
    Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
    printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
    trunk is a round, solid object.
    I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
    I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
    how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
    I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
    e-mail me at [email protected]

    brazzmonkey wrote:
    Hi everyone,
    I noticed the following message when network starts on my gateway
    Warning: This functionality is deprecated.
    Please refer to /etc/rc.conf on how to define a single wired
    connection, or use a utility such as netcfg.
    Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
    Currently, my set up is the following (old way):
    INTERFACES=(eth0 eth1)
    eth0="dhcp"
    eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
    ROUTES=(!gateway)
    eth0 is on DHCP because the IP is dynamically assigned my ISP.
    eth1 has a fix IP because it's on the LAN side.
    No problem to use DHCP on eth0 with the new settings.
    But for eth1, I don't know what I am supposed to write for gateway.
    Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
    Any guidance appreciated, thanks.
    brazzmonkey,
    you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
    Use, f.e., netcfg:
    Comment your old lines.
    In /etc/rc.conf insert:
    NETWORKS=(Eth0-dhcp Eth1-static)
    DAEMONS=(..... !network @net-profiles ....)
    In /etc/network.d create 2 files:
    First one is named  Eth0-dhcp.
    Contents:
    CONNECTION="ethernet"
    DESCRIPTION="Whatever text"
    INTERFACE=eth0
    HOSTNAME="your hostname"
    IP="dhcp"
    DHCP_TIMEOUT=15
    Second one is named Eth1-static.
    Contents:
    CONNECTION='ethernet'
    DESCRIPTION='whatver'
    INTERFACE='eth1'
    HOSTNAME='hname'
    IP='static'
    ADDR='192.168.0.10'
    GATEWAY='192.168.0.1' # your gateway IP
    DNS=('192.168.0.1') # your DNS server
    The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
    Hope it helps.
    mektub
    PS: netcfg must be installed.
    Last edited by Mektub (2011-07-20 14:07:05)

  • I need help with downgradeing my ios for my ipod touch 4th gen

    i need help with downgradeing my ios for my ipod touch 4th gen

    As has alwys been the case, you cannot go back.
    Sorry

  • I need help with export settings

    Hi everyone,
    I need help outputting an HD file for presenting a video to a client. I have tried exporting to HD .mov (H.264 codec) and PE keeps crashing (error compiling movie). From what I’ve read here, it’s due to the gargantuan file QT creates and HD space (even though I think I have enough HD available).
    So, I need a recommendation from you on what kind of file to output which will allow me to present the movie to the client in HD. This file is solely for the presentation, I have already published for web (FLV) and YouTube (direct share from PE) and they both worked fine.
    Here are my project specs:
    Timeline:           4:26
    Format:               1920 X 1080 HD
    Timebase:          29.97 frames per second
    OS:                        Windows XP SP3
    Processor:          Intel Core 2 Duo @ 2.66GHz
    RAM:                    4GB
    Project Drive:   250GB disk with 152GB free space internal dedicated project drive (separate from OS)
    Thanks in advance for your help,
    Jose

    Hi Steve, Neale,
    I wanted to follow-up on this post. I came into the office today to run a few tests so I can make sure that I have the correct settings on my camera and PE project for the next time around. Here are few observations I was wondering if you can comment on:
    My Sony camera cannot shoot HDV. The only format it supports is AVCHD, so I'm stuck converting.
    I tried to convert the footage I have to HDV with the software I have (AVS Video Converter and Koyote Soft HD Converter) and neither of the two have an "HDV" conversion setting. I see AVI, MPEG, MOV and many different settings in each (AVI: Hd Video 1080p: H.264AVC, 29.97fps, 4200kbps, Audio MP3, 256 kbps or MPEG: HD Video 1080p - MPEG2, 15000 kbps, 1920X1080, 29.97fps, etc). What should I be looking for?
    I searched for "best file format" in the forum and found various postings from both of you referring to converting to DV-AVI within PE; especially if you have AVCHD footage (which I have). So, I followed directions and converted a file for testing. Then, I created a new project using HDV 1080i 30 settings and imported the converted file. I still get a red line on the timeline. Any thoughts on what I'm doing wrong?
    I also converted the MOV files (shot in HDV 60i with the pro camera) to DV-AVI. I also get a red line on the timeline...
    The DV-AVI converted footage (both cases) doesn't appear to be HD. It looks jagged on the preview window. Is it HD?
    The DV-AVI converted footage is almost double the file size as the MTS (AVCHAD) file (138mb vs. 60mb). Isn't that going to make PE run slower?
    Thanks in advance for your help. I just wanna make sure I do my homework now so I set everything up correctly on the next project.
    Jose
    P.S. I almost forgot! Here's the link to the live video on YouTube: http://www.youtube.com/watch?v=fEkqPmefJV0
    Message was edited by: josejb70 - Added YouTube link

  • [solved]Need help with a bash script for MOC conky artwork.

    I need some help with a bash script for displaying artwork from MOC.
    Music folders have a file called 'front.jpg' in them, so I need to pull the current directory from MOCP and then display the 'front.jpg' file in conky.
    mocp -Q %file
    gives me the current file playing, but I need the directory (perhaps some way to use only everything after the last  '/'?)
    A point in the right direction would be appreciated.
    thanks, d
    Last edited by dgz (2013-08-29 21:24:28)

    Xyne wrote:
    You should also quote the variables and output in double quotes to make the code robust, e.g.
    filename="$(mocp -Q %file)"
    dirname="${filename%/*}"
    cp "$dirname"/front.jpg ~/backup/art.jpg
    Without the quotes, whitespace will break the code. Even if you don't expect whitespace in any of the paths, it's still good coding practice to include the quotes imo.
    thanks for the tip.
    here it is, anyhow:
    #!/bin/bash
    filename=$(mocp -Q %file)
    dirname=${filename%/*}
    cp ${dirname}/front.jpg ~/backup/art.jpg
    then in conky:
    $alignr${execi 30 ~/bin/artc}${image ~/backup/art.jpg -s 100x100 -p -3,60}
    thanks for the help.
    Last edited by dgz (2013-08-29 21:26:32)

  • Need help with exporting videos to iPhone format

    When I export a video from iTunes to my desktop so I can get the export menu pictured below, if I choose the iPhone option it then lets me choose where to export and when it begins the export it goes to a windows application (I run Parallels for Quickbooks). Not sure why it does this? When the movie is saved to my desktop and I pull up the info on it (see below) it shows the little Parallels icon in the top left but under kind it says it's an Apple MPEG-4 movie?
    The reason behind all this is that I would like to send out several videos to iphone/ipad users and want to keep the file small. Also, this must be a useful option or don't see why apple would have on the menu. Just looking fro the best method to send videos to iphoon users, thanks! Running 10.9.1

    Do you have iMovie isntalled on your MB or have yhou removed it?
    iMovie has built-in profiles for exporting vidoes optimized for specific devices.
    QuickTime has some powerful export features when you really want to dive into settings and tweaking, but I find myself using it less and less, going more and more in favor of iMovie's 1 click publishing.

  • Need help with Export workflow.

    Hello again.
    Today I was experimenting with exporting a project using Export QT Movie and QT Conversion.
    My goal is to show a QT project on the web, either 640x480 or 320xx240, depending on how monstrous the file size is.
    My initial impression was that export QT Movie simply generates (I'm guessing) a full size rendering of the project. It's icon is a FC icon. What I did then was an "Open with..." quicktime(pro). This is where I get confused: I know that the next steps are for for preparing the project for sizes, compressions and so on. The export to QT movie seems to be a longer route to get to the settings that you need to use in QT Conversion, which after selecting QT conversion, you have the Format, Use, and Options settings.
    Am I right so far?
    Some background about my project- Easy setup= DV-NTSC. If I look in my browser, my clips are 720x480, 29.97fps, Compressor(?)DV/DVCPRO-NTSC, pixel aspect ratio, NTSC-CCIR 601 and anamorphic is checked.
    I also have still photos motion control stuff, PS tiffs, that do not have anamorphic checked.
    Form here on is where I get confused.
    Under settings, I am selecting DV/dvc-NTSC for compression frame rate 29.97, medium compressor, scan mode, interlaced, and aspect 4:3.
    The filters setting I don't use.
    The size setting I'm trying 320x240 with aspect ratio and de interlace video UNCHECKED.
    Is this a good workflow for the web. I notice on 640x480 my titles (livetype) seem kind of jagged.
    Any help preparing a project for the web would be appreciated. If you need more info let me know.
    Thanks so much.
    Jonathan

    Thanks for the additional comments and ideas.
    In terms of profile, as I mentioned, the intermediates will be going off to the editor (off-site) for editing on his FCP suite.  I'll stick to working in the prescribed HDTV (Rec. 709) space, and I've given him all the detail I can of how I'm working, but crucially I haven't stood at his edit-suite to see how the stuff looks.
    But, he's no newbie, so I'm hoping it'll be OK.
    Blasted shame about the H.264 BluRay not being compatible with QT - I thought I had this whole issue beat until that came along.  It's not a matter of disk space here, but the editor is mithering that the intermediates we are testing, in either PNG, or Animation, and a couple of others, are choking his playback.
    I'm not sure what to say about that, other than to go down this road of trying to squish these intermediates as low as possible without wrecking the look, hence finding that the DNxHD is providing the best solution.  If it had been a SD project, I might well have tried the native H.264, even over our normal PNG workflow.
    So what will play the native H.264 BluRay compressed output?
    Julian.

  • Need help ASAP exporting 1280x720 video as 720x480 letterboxed w/ timecode

    Hello. I'm using FCP 6.0.4. I have a video that is 1280 x 720, 24FPS, Sorenson Video 3 compression. I need to add an academy leader to this (the leader video file is 29.97FPS, Apple Motion JPEG A, 720 x 486), add a timecode filter using timecode reader (I know how to do this part), and get the finished video exported as a 720x480, 29.97FPS, DV/DVCPRO - NTSC video with the correct aspect ratio for the original video file. Every time I have tried this so far I get a 720x480 with the timecode but the picture looks stretched horizontally.
    Please help with this ASAP as I am a student working on my final project and I've already lost several days trying to figure this out.
    THANK YOU!

    Create a standard definition project (In easy setup choose DV or DVCPRO Anamorphic) > copy and paste the HD timeline on the newly created timeline and export.
    If in QT player you see a stretched image, don't worry, that is normal when QT plays non-square pixels (anamorphic).
    Hit command J (QT Show movie properties) > Click on presentation tab > Conform aperture > Clean or Production.
    If this video is not for the web or generally for computers do not save the change as your movie will look absolutely fine when in DVDstudio you'll choose a 16:9 display mode.
    G.

  • Help with exporting Minecraft video

    Hello. My name is Reynir Aron. I make Minecraft videos and I recently switched from Final Cut Pro 7 to Premiere Pro CS6 and I love using Premiere.
    However there is one little problem, when I export the video (even if I do it through Media Encoder) the video looks very smoothed out (for example the text looks really crappy and isn't pixellated).
    Can anybody help me? The video is not being scaled up, the source video, my sequence and the export settings are all 1280x720.
    By the way, is there any plugin or anything that lets me export using QuickTime Pro 7?
    Here is a screenshot of the output I get:
    This also happens if I check "Use Maximum Render Quality".
    This is what I see in Premiere's Program window:
    I have an iMac8,1 (Early 2008) with a 2,8GHz Intel Core 2 Duo, 4GB 800 MHz DDR2 SDRAM, an ATI Radeon HD 2600 Pro 256 MB and I'm running OS X Mountain Lion 10.8.2.

    I think my daughter is using FRAPS, but of course not transcoding, just putting that right into Premiere. If your captured file is 30fps, what is the transcoded ProRes file? I don't know if ProRes supports non-video settings, so maybe that is converted to 29.97? But then the edit sequence is 30fps, and I do see an issue - FIELDS is set to LOWER, but should be PROGRESSIVE. That could be causing the jaggies issue on your output.
    How did you create the editing Sequence? Try creating a NEW SEQUENCE with the same settings, except make it Progressive, then copy/paste contents of interlaced sequence into the progressive sequence and then Export again, see if that helps. Or just do a short sample to check, to save time.
    Thanks
    Jeff

  • I need help with rendering a video.

    PC specs: http://gyazo.com/8c5f268350b92762adc1f4229797eba5
    Adobe After Effects info: Updated about an hour ago.
    Video File info: http://gyazo.com/90a0b66c4dfa99d9d396eb561ac79a49 and http://gyazo.com/74ef689f606792b8a855e6e7d3c45396
    Problem: I can't render the effects I added. The render time is over 300 hours.
    Details: I got AE yesturday and I imported in a video that I already edited and rendered with Sony Vegas 12. I imported it into AE to add some 3D tracked text for the intro. I added all the text in and I'm ready to render. First try rendering I just get the same exact video I imported, no effects, no text, nothing different. The first render took about 19 minutes. Now the second time I tried changing the format that it would render to. I changed it to h.624 and got told it would take 434 hours to render, I waited about 5 minutes and that time never dropped. I stopped the render, looked online and was told restarting my computer might help. I restarted and tried to render this time in Quicktime, I got about 345 hours this time. Also I was only using 11% of 11.9gb of RAM according to AE.
    The video does not have that many effects in it at all. It is simply 3D text tracked to an object for about 7 seconds. I also just need the intro to render so I can put it back together in Vegas 12. Everytime it does render I end up with the same exact video with no effects.
    This is what I'm seeing right now: http://gyazo.com/f5fcc73636171c8213451288a507c2ae 14 hours to render a 10 second clip with only some 3D text. about 300 frames.

    Thanks for posting the screenshots.  It really helps with assessing your problem.
    You say "just some 3D text" but I presume this is extruded 3D text using the Ray Traced render option in After Effects.
    Unfortunately, your AMD display card does not allow GPU acceleration of After Effects Ray Traced rendering, with the result that you will see ridiculous render times like those you are seeing.  The AE Ray Traced render engine is extremely slow without exactly the right display card - see the System Requirements here.
    If you are using AE CC you may wish to explore the Cinema 4D integration with AE. 
    Otherwise, you can fake 3D extrusion by manually building a stack of identical layers in a precomp, or using a script that does the stacking for you. 
    You can also try third party 3D plugins like Zaxwerks 3D Invigorator, or Video Copilot Element 3D.

  • Hi i need help with getting my homework for school

    im in a nine week class that ends tommorw and need help go\etting my program working properly these are the requirements ofr the assignments:
    Modify the Inventory Program by adding a button to the GUI that allows the user to move
    to the first item, the previous item, the next item, and the last item in the inventory. If the
    first item is displayed and the user clicks on the Previous button, the last item should
    display. If the last item is displayed and the user clicks on the Next button, the first item
    should display.
    · Add a company logo to the GUI using Java graphics classes.
    Modify the Inventory Program to include an Add button, a Delete button, and a Modifybutton on the GUI. These buttons should allow the user to perform the corresponding actions on the item name, the number of units in stock, and the price of each unit. An item added to the inventory should have an item number one more than the previous last item. Add a Save button to the GUI that saves the inventory to a C:\data\inventory.dat file. Use exception handling to create the directory and file if necessary. Add a search button to the GUI that allows the user to search for an item in the inventory by the product name. If the product is not found, the GUI should display an appropriate message. If the product is found, the GUI should display that product’s information in the GUI. Post final .class and .java files as an attachment.
    this is what i have there are three java files im puttong in here
    first is the panel frame
    import java.awt.GridLayout;
    import java.awt.BorderLayout;
    import java.awt.FlowLayout;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.JButton;
    import javax.swing.JLabel;
    import java.awt.GridBagLayout;
    import java.awt.GridBagConstraints;
    import java.awt.Component;
    import javax.swing.SwingConstants;
    import javax.swing.Icon;
    import javax.swing.JComboBox;
    import javax.swing.JTextArea;
    import javax.swing.JList;
    import java.util.*;
    import java.text.NumberFormat;
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.net.URL;
    import java.io.*;
    import java.util.Scanner;
    import javax.swing.JOptionPane;
    import java.text.NumberFormat;
    public class PanelFrame extends JFrame
         private JPanel buttonJPanel; // panel to hold buttons
         private JButton buttons[]; // array of buttons
         private JLabel label1; // JLabel iventory number
         private JLabel label2; // JLabel product name
         private JLabel label3; // JLabel product price
         private JLabel label4; // JLabel product in stock
         private String p_ProductName; // private variable for the employee name.
         private int p_UnitCount; // private variable for the hours worked.
         private double p_UnitPrice; // private variable for the hourly wage.
         private int p_ItemNumber; // private inventory number
         //create inventory object
         Inventory myInventory = new Inventory ();
    // no-argument constructor
    public PanelFrame()
    super( "Panel Demo" );
    //Add items to the inventory within the Invntory
              myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
              myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
              myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
              myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
              myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
    setLayout( new FlowLayout() ); // set frame layout
    // JLabel constructor with a string argument
              label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
              label1.setToolTipText( "This is Inventory number" );
              add( label1 ); // add label1 to JFrame
              label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
              label2.setToolTipText( "This is Product Name" );
              add( label2 ); // add label1 to JFrame
              label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
              label3.setToolTipText( "This is product Price");
              add( label3 ); // add label1 to JFrame
              label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
              label4.setToolTipText( "This is Quanity in stock: " );
              add( label4 ); // add label1 to JFrame
    buttons = new JButton[ 4 ]; // create buttons array
    buttonJPanel = new JPanel(); // set up panel
    buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
              String names[] = { "First", "Previous", "Next", "Last"  };
              JButton buttons[] = new JButton[ names.length ];
              // create and add buttons
              for ( int count = 0; count < buttons.length; count++ )
              buttons[ count ] = new JButton( names[ count ] );
              buttonJPanel.add( buttons[ count ] ); // add button to panel
              } // end for
    // setup the logo for the GUI ...image needs to be in same directory as source code
              URL url = this.getClass().getResource("book103.gif");
              Image img = Toolkit.getDefaultToolkit().getImage(url);
              // scale the image so that it'll fit in the GUI
              Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
              // create a JLabel with the image as the label's Icon
              Icon logoIcon = new ImageIcon(scaledImage);
              JLabel companyLogoLabel = new JLabel(logoIcon);
              companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
              // add the logo to the GUI
              getContentPane().add(companyLogoLabel, BorderLayout.WEST);
    add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
    } // end PanelFrame constructor
    } // end class PanelFrame

    this is the original part again with the code tag added
    import java.awt.GridLayout;
    import java.awt.BorderLayout;
    import java.awt.FlowLayout;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.JButton;
    import javax.swing.JLabel;
    import java.awt.GridBagLayout;
    import java.awt.GridBagConstraints;
    import java.awt.Component;
    import javax.swing.SwingConstants;
    import javax.swing.Icon;
    import javax.swing.JComboBox;
    import javax.swing.JTextArea;
    import javax.swing.JList;
    import java.util.;
    import java.text.NumberFormat;
    import javax.swing.;
    import java.awt.;
    import java.awt.event.;
    import java.net.URL;
    import java.io.*;
    import java.util.Scanner;
    import javax.swing.JOptionPane;
    import java.text.NumberFormat;
    public class PanelFrame extends JFrame
    private JPanel buttonJPanel; // panel to hold buttons
    private JButton buttons[]; // array of buttons
    private JLabel label1; // JLabel iventory number
    private JLabel label2; // JLabel product name
    private JLabel label3; // JLabel product price
    private JLabel label4; // JLabel product in stock
    private String p_ProductName; // private variable for the employee name.
    private int p_UnitCount; // private variable for the hours worked.
    private double p_UnitPrice; // private variable for the hourly wage.
    private int p_ItemNumber; // private inventory number
    //create inventory object
    Inventory myInventory = new Inventory ();
    // no-argument constructor
    public PanelFrame()
    super( "Panel Demo" );
    //Add items to the inventory within the Invntory
    myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
    myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
    myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
    myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
    myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
    setLayout( new FlowLayout() ); // set frame layout
    // JLabel constructor with a string argument
    label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
    label1.setToolTipText( "This is Inventory number" );
    add( label1 ); // add label1 to JFrame
    label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
    label2.setToolTipText( "This is Product Name" );
    add( label2 ); // add label1 to JFrame
    label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
    label3.setToolTipText( "This is product Price");
    add( label3 ); // add label1 to JFrame
    label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
    label4.setToolTipText( "This is Quanity in stock: " );
    add( label4 ); // add label1 to JFrame
    buttons = new JButton[ 4 ]; // create buttons array
    buttonJPanel = new JPanel(); // set up panel
    buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
    String names[] = { "First", "Previous", "Next", "Last" };
    JButton buttons[] = new JButton[ names.length ];
    // create and add buttons
    for ( int count = 0; count < buttons.length; count++ )
    buttons[ count ] = new JButton( names[ count ] );
    buttonJPanel.add( buttons[ count ] ); // add button to panel
    } // end for
    // setup the logo for the GUI ...image needs to be in same directory as source code
    URL url = this.getClass().getResource("book103.gif");
    Image img = Toolkit.getDefaultToolkit().getImage(url);
    // scale the image so that it'll fit in the GUI
    Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
    // create a JLabel with the image as the label's Icon
    Icon logoIcon = new ImageIcon(scaledImage);
    JLabel companyLogoLabel = new JLabel(logoIcon);
    companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
    // add the logo to the GUI
    getContentPane().add(companyLogoLabel, BorderLayout.WEST);
    add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
    } // end PanelFrame constructor
    } // end class PanelFrame

  • Need Help with Export to ePub in CS5.5

    I am working on my first ePub in InDesign 5.5. When I go to File—Export for— there is no option for ePub. In fact there is only "Buzzword" and it grayed out. How do I get export for epub?

    In InDesign CS 5.5, it's File > Export > EPUB.
    However, if this is new for you, if you haven't prepared your file properly, it may come out like mush.
    You need to prepare export order, styling of paragraph styles, character styles and object styles, you need to create a TOC style, there are many steps.
    I highly recommend one of these two resources:
    Anne-Marie Concepcion has a video series on Lynda.com for CS5.5:
    http://www.lynda.com/InDesign-CS5-5-tutorials/to-EPUB-Kindle-and-iPad/82258-2.html
    You can get a week trial for free.
    You can also get eBooks from Elizabeth Castro:
    http://www.elizabethcastro.com/epub/

  • Need help with output type EDI for ERS

    All,
    I want to be able to run and ERS settlement and have the invoices created sent via EDI/XML to the supplier.   I have several questions on the set up.
    1)  I have output type ERS6 which is defined as ERS EDI.  I assume because it does not start with Z* this is SAP standard, so I shouldn't have to modify any of this.
    2)  I've added my supplier to this output type. 
    3)  I assume I need to create a partner profile for this supplier?  If so can someone tell me the message type to use?
    Is there any set up I'm missing in this process?   I've executed ERS but do not get an idoc and I'm fairly certain it's because I haven't done the partner profile set-up.
    Thanks for your help.
    Sandra

    Hi,
    You don't have to modify thise setup unless you have any customized requirement.
    You are missing partner profile setup.Carry out the setup and run MRRL tcode to create the idocs
    Enter the following values using tcode WE20.
    Field                                       Value
    Message type                         GSVERF
    Partner type                             LI (vendor)
    Partner function                        LF (vendor)
    Port                                         SUBSYSTEM ( Port to your middleware)
    Output mode                            such as Collect IDocs
    Basic type                                GSVERF01
    Application                                 MR
    Output type                                ERS6 or the type you have defined
    Regards,
    Karuna

  • Hey I need help with my new Video Ipod haha

    Hey whats up.. i need help.. i want to put some movies on my ipod from my computer.. but they wont go into itunes.. i need to find a converter to convert some divx movies and vlc what converter should i download???

    you've posted in the wrong section of this board..
    for support of iPod users on Windows, please ask the experts here:
    http://discussions.apple.com/forum.jspa?forumID=807
    iMovie is the video edit app, that comes free and exclusively on every Mac...

Maybe you are looking for

  • Excise invoice ..?

    Hi all Can anybody explain me , what are all the transaction codes  are there in SAP for below activity. 1.were to get the list of captured  vendor excise invoice list. 2.How to find whether posting done for the same list or not ..? Thanks sap-mm

  • Push mail is not working for gmail and hotmail on ...

    i have been using my nokia e72 since february 2011. i had two mailbox configured, gmail and hotmail. Until last week, everything was fine. but suddenly my push mail stopped working for both gmail and hotmail. when i noticed this, i removed both of my

  • Transaction to modify a table

    Hi, What is the transaction to modify a table  (oracle) ? Thanks in advance

  • Table for the field MAT

    Hello, I want to know the table name for the field MAT (maintenance Activity type) in PM. Searched all the tables in the PM but unable to find the field. Basically this MAT should be in shynchronization with the Applicant Number in the PS that is the

  • Safari crashes when opening large PDF files

    Since upgrading to iOS 7 we have found that anytime we try to open a PDF larger than 30MBs our Safrai browsers crash.  I've tried it on the Mercury browser and had the same results, the only difference being that I can download the PDF as a file and