I need help with the new updates

I completed the Iphone IOS 7 update but now my itunes says i need the new version.  After i downloaded that it then said i need to have at least OS X v 10.8 or higher i have no idea what that is???

First things First...
dobbyboy wrote:
It says 10.5.8 so this means i have to buy Mountain Lion so I can run the new Itunes?
The first step in Upgrading... is to Snow Leopard = OS X 10.6.x Which is the Minimum requirement for iTunes v 11.1
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...

Similar Messages

  • I need help with the new update

    I am at a complete loss on what to do. I have been trying to install the new update but it keeps bringing up an error. I have searched on here for some solutions and I believe I am not doing this right. I have uninstalled all the items everyone has suggested (ex. Bonjour...) and rebooted. I went and downloaded iTunes again but two things keep happening:
    1. While the iTunes Setup is installing and pop-up box says "Object already exists" and this pops up multiple times
    and
    2. After those messages go away another pop up says "iTunes Installer completed - Errorc occurred during installation before iTunes could be configured. Your system has not been modified. To complete the installation, run the installer again."
    What am I doing wrong here? Can someone please help me? I have a Windows 7 laptop.

    For "Object already exists" or "Access denied" errors when installing try opening Control Panel > Programs and Features > View installed updates then checking for Security Update for Microsoft Windows (KB2918614). Uninstall if you have it, then reboot, and try installing iTunes again.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I need help with the Security Update 2006-002!

    Security update has really screwed up the two systems I've installed it on:
    1) My G4 PowerBook refused to reboot after the update, getting only as far as the initialApple screen. Rebooting with a 10.4 install disk and using Disk Utilities to try to repair the disk either results in an "Unable to unmount disk" error, or if Repair does proceed, it is unable to repair the disk. I get a "Invalid node structure" error message, then a "Rebuilding B-Tree" message, then a "The Voluma Macintosh HD could not be repaird" message, and Repair quits with a "Error: the underlying task reported failure on exit" message.
    2) On my Dual 2 GHz G5 desktop, Safari appears to be unable to load more than six URL:s in 6 tabs; I read about 20 webcomics all organized in a bookmarks folder, and my usual practice is to select "Open in tabs" to open them all at once. Heretofore Safari has opened all the tabs and all the URLs without a hitch. After the update it will open all the ttabs but only about the first six sites load - all the rest just sit there spinning their wheels.
    Also it has hosed iChat on my Dsktop. iChat will open, but will not send or receive chats, and will not open the buddy window.
    Also Also, the system frequently hangs, seizing up anywhere from 30 seconds to a few minutes, then resuming normally. Safari seems to be the culprit, but I can't really tell.
    I need an update to recover from the effects of the last update.

    I'm not very knowledgeable on macs yet being a new user (switcher) However, there appear to have been too many problems for too many people and too many systems associated with this update for it to be co-incidental. Take a look through the topics since the update appeared. My computer is brand new. The update did something that screwed something in the startup file (or whatever) The nice man in India helped me get the computer going by removing all sorts of wonderous things, this after his colleague in Cork had sent me all sorts of stuff to my work address to try out when I got home, like pram and nvram (which only made things worse) and other things. Now my computers fixed. Except that there's now no printer, it won't find the drivers off the install discs and any driver I load from canon isn't recognised or a script isn't recognised. I bought this thing to get away from problems like this on PCs!!!!
    iMac Intel 20"   Mac OS X (10.4.4)  

  • Need help with the new Multi-cam feature in CC

    Hi,
    I'm trying to use the Multi-cam feature in CC and have a few questions, so would be happy with help/advice for any of the issues below. The platform is Windows 7 Pro 64bit.
    The first question is what am I doing wrong? This question relates to the fact I'm trying to use Multi-cam and encountering a lot of frustrating glitches, as sometimes it seems to work and at others it doesn't.
    The video I'm trying to edit comes from a dance show so I created a sequence called Act 1. I then highlighted the six clips of Act 1 with Cam 01 at the top, as I wanted the audio from this clip and made a Multi-cam feature using the audio synch. I dragged it to the sequence, set the prog window to Multi-cam and was amazed at how well it had synchronised all clips, as I could see all six clips with great audio synch from Cam 01. So far so good and after thinking how brilliant it was, things went downhill from there
    I started by using ripple delete to drag to the start of Act one and then tried editing with Multi-cam. That's where I encountered the first problem, as sometimes it seemed to toggle between cams but didn't put edit points in and the selected cam had a yellow border and not a red one. At other times it inserted edit points when I changed cams and the selected cam has a red border. I can't work out what I'm doing, or not doing for this to happen. Can anyone help please?
    The second question is how do I cut audio and video at exactly the same point, as I want to edit out pauses in between the different elements of the actual dance show. When I use the razor tool in Multi-cam it only cuts the video. I tried highliting audio and video using shift, but to no effect. If it matters audio and video are shown as linked when I right click. I thought I might get it to work if I revealed all original clips within the MC nest using the technique shown in "Adobe Learn." This was Ctrl double click, but it resulted in the third problem.
    When I tried Ctrl double click I ended up with only Cam 02 showing in the V2 track and after some frustrating attempts at resolving this issue I decided to start all over again. I deleted the PP project and created a new one, importing everything again. I followed exactly the same procedure as I originally did to create a Multi-cam nest, but when I dragged it to the new sequence I saw Cam 02 in V2 of the sequence, which is the same as it was before I deleted the original project. Premiere Pro seems to have annoyingly remembered the actions that went wrong, so please can anyone tell me how to tell Premiere Pro not to do this?
    Thanks if anyone can help me on any of the issues.

    In Premiere Pro, multi-camera is accomplished by nesting a sequence.  There's a new, more automated way of doing this in CC.  View the steps here: http://blogs.adobe.com/premierepro/2013/04/a-quick-walkthrough-of-editing-a-multi-camera-s equence-with-clips-synchronized-by-audio.html
    HOWEVER, you must be warned that multi-cam in CC is currently broken.  A patch is in the works, but until it is released you should not use multi-cam in CC.

  • I need help with IPad new update. Problem with download.

    Trying to update my IPad and I keep getting message after it is done downloading. "There was a problem downloading the software for IPad.  The network connection timed out. Make sure network settings is active."  I have my IPad set to never turn off.  Can someone help me with this problem?

    Have you tried temporarily turning off your firewall and antivirus software until the download has completed ?

  • I need help with the new version of iMovie.

    When I click on iTunes, the message in the browser says "The contents of your iTunes library will appear here".  Nothing ever appears in the  Browser box!  HELP!!  Thanks.

    I didn't mention ITunes store   I want to use songs from my iTunes library with a movie I am putting together in iMovie.  I have done this many times before with older versions of iMovie.  The contents of my iTunes Library will not load into this iMovie version (10.0.5).
    Thanks for your interest.. 

  • HT1923 With the new update, the itunes wouldn't install.  I uninstalled everything. When I click to download itunes, it goes to the screen that congratulations on your download but nothing is downloaded.  Please help.

    I had issues with the new update to itunes.  I did as the website instructed and uninstalled all components. 
    I went back to download and it acts like everything has downloaded
    by stating congratulations but nothing had downloaded. 
    Please help/.
    I need the itunes on my desktop (PC_)

    Hi there, to authorize a computer, you open up itunes, and at the very very top lefthand corner, there will be a little window. Click on that, and it will present you with a list of options.  From there, you go to the third option down, which says "Itunes Store," hover over it with your mouse, and it will give you another set of options. From there, you can see the two options, "Authorize" an "Deauthorize computer.  Just  click on "Authorize," enter in your apple ID and password, and your computer will be authorized! Hope I helped, ~Samuel

  • I updated my iPhone with the new update..and afterwards it turned off and instead of turning back on it tells me to plug it into iTunes..then iTunes tells me my phone is in recovery mode and I need to restore it..is there anything I can do w/o restoring?

    I updated my iPhone with the new update..and then it turned off...instead of turning back on it tells me to plug it into iTunes..and when I do iTunes tells me that my phone is in recovery mode and needs to be restored..is there anything I can do without restoring it?

    Same thing happened here ~ tech guy at a local authorized Apple repair store said it had something to do with improper backup from which the restore would be made. Still have a phone that asks to be connected to Itunes but won't do anything else . . . frustrated.

  • Why can't I use the Podcast app with the new update?

    Why can't I use the Podcast app with the new update? There needs to be an update for ios7 but it freezes and goes back to the home screen, can anyone help, thanks!

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod

  • Help with Footers (New Update Glitch)

    Hi there,
    I'm in need of some urgent help with my website as upon publishing with the new update installed all my footers have changed.
    I now have massive gaps between where my content ends and the footer begins on almost every page. Example.
    Pages which are attached to the Master pages are not reading the same footer positions now. For example, my home page footer begins at nearly 1300 but the master it's attached to it should be closer to 950..... Everything was fine until the update today.
    Any help would be appreciated. Thanks!

    Maybe I can explain this a little better, issue is still going on, spoke with an Adobe representative but didn't get any helpful advice, actually got no advice other than to send the file in.
    So here's my home page: you can see the gap between the content and the footer (with the footer starting at around 1300.
    But then here's the Master page it's attached to, the footer is set to start way higher, this is happening on every one of my pages.

  • Need help with the session state value items.

    I need help with the session state value items.
    Trigger is created (on After delete, insert action) on table A.
    When insert in table B at least one row, then trigger update value to 'Y'
    in table A.
    When delete all rows from a table B,, then trigger update value to 'N'
    in table A.
    In detail report changes are visible, but the trigger replacement value is not set in session value.
    How can I implement this?

    You'll have to create a process which runs after your database update process that does a query and loads the result into your page item.
    For example
    SELECT YN_COLUMN
    FROM My_TABLE
    INTO My_Page_Item
    WHERE Key_value = My_Page_Item_Holding_Key_ValueThe DML process will only return key values after updating, such as an ID primary key updated by a sequence in a trigger.
    If the value is showing in a report, make sure the report refreshes on reload of the page.
    Edited by: Bob37 on Dec 6, 2011 10:36 AM

  • What's with the analyzing with the new update?

    Has Apple turned into big brother? What is with the analyzing of my volume size with the new update?
    Sorry, I'm just always suspicious.

    Downloaded latest update 7-27 and all I can say is it is the most pitiful piece of feces I have ever seen. Letters are blue with black background and you can't read **** because of the contrast . What was wrong with the white letters and black background, nothing except some idiot has to justify his miserable existence by making changes on a system that was just fine. Contacts are another issue now that it takes anywhere from 3 to 5 steps to get there. Unlocking the phone is another one , why should I have to unlock it just to have another screen to ask me where to go. I have been on the phone with Verizon as well as going to the store for help in deciphering this new pitiful update. The answers from the help at the stores is to email Google or Verizon about these issues .I purchased the original droid in dec. of 2009 and was happy with it. then upgraded to the razr jan 2012 and have been pleased with it till this latest update and now If I could get anything else  I would, another thing is I would NOT recommend the droid to anyone for purchase.I have even tought about getting the iphone at this point because I am so dissatisfied . when I decided to post this I tried the user name of irked , it was taken as well as ******, so apparently I'm not the only disgusted user.

  • Need Help with the Clone Tool

    I need help with the clone tool, in that when I clone (let's say grass as example),  the new cloned area does NOT come out as sharp as the area selected.  It comes out much softer and somewhat blurred.  I have the opacity and flow both set at 100%.  This is very frustrating since I can not get a true clone.

    what "tip" do you have selected? where are you sampling from ( found in top option bar) ALSO make sure MODE is normal
    http://helpx.adobe.com/photoshop/using/retouching-repairing-images.html
    -janelle

  • I need Help with the dynamic link feature in CS3

    Hi I was wondering if anyone could help me with an issue I am having? I have the adobe cs3 master collection. Having watched tutorials on the dynamic link feature my version seems not to have the same options as those I have viewed. I wish to send my premiere video creation to encore using dynamic link, however when I click "file" and then "adobe dynamic link" the only options available are about "adobe after effects". I can export to encore however I am only alloowed to export one premiere sequence to one new encore file, I cannot create an encore file and import several premiere sequence into the same encore project. That means currently I can only have an encore creation with one premiere sequence in it, and I have no adobe dynamic link. Any help anyone could offer would be greatly appreciated.

    Thanks very much for that guys but my premiere media encoder only lets me export as: MPEG1, MPEG1-VCD, MPEG2, MPEG2 blu-ray, MPEG2-DVD, MPEG2-SVCD, H.264, H.264 blu-ray, Adobe Flash Video, Quicktime, Real Media, Windows Media. Are any of these formats DV AVI?
    Am I to export my videos direct to encore or save them elsewhere (e.g desktop). It seems that I cannot export sequences from different premiere projects to the same encore project.
    Sorry if any of these questions seem obvious, I am just new to premiere and keen to do things right from the off.
    Many thanks again guys.
    Date: Tue, 24 Nov 2009 19:32:47 -0700
    From: [email protected]
    To: [email protected]
    Subject: I need Help with the dynamic link feature in CS3
    Harm is correct.  For SD DVD, exporting as a DV AVI file from Pr will give you good results.  Encore's Automatic Transcoding will give you maximum quality for the available disc space.
    -Jeff
    >

  • HT1923 I Can't print CD labels with the new update of iTunes

    I cann't print CD labels with the new update of iTunes.

    Don't know whether you ever found the templates, but here is a site with many different labels: http://www.worldlabel.com/Pages/wl-ol5025.htm#templates
    I found what I needed in a Word document for Memorex labels.
    Good luck!

Maybe you are looking for