I need java dvelopment kit to work on a certain website. plugin is set as "ask to activate" but i don't get a option to activate so can't use the website

I need the Java Development Toolkit to work on a specific site to measure packet loss. As Firefox lists the plugin as a security risk there is no way to "enable" it permanently. So i choose the "ask to activate" option. but when i visit the site that requires java development toolkit, no option to click on anything to activate, no pop ups nothing. and i can't use the site.
Have installed latest java plugin, uninstalled, re-installed etc.
how can I solve this issue [short of dumping Firefox]

Thanks for the prompt response Phillip.
I tried that and it allowed me to select to activate the development toolkit on that site but the feature on the site still didn't work.
I can access the site and get it to work in IE and so I tried opening the site in Firefox with IE tab 2 but still no luck.
I am trying to use the site pingtest.com to measure my internet performance but the packet test always fails with java toolkit error.
Any other ideas greatly appreciated as I hate using IE. I have latest java update and everything too
cheers dandelion777

Similar Messages

  • HT1206 I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account. Now I can't use the work email to create the new iTunes account.  how do I remove the email from my personal accou

    Since I upgraded to Mavericks from Snow Leopard I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account.
    Now I can't use the work email to create the new iTunes account.  how do I remove the email from my personal account?

    You can long into an account via this page and update the email addresses that you have on it : http://appleid.apple.com

  • Hello, I've installed Lion but now it says I can't use the Cloud as I need the Apple ID Password to use Back to My Mac. I've obtained several new Apple ID passwords which work ok on my phone but doesn't seem to be the password it's looking for?

    Hello, I've installed Lion but now it says I can't use the Cloud as I need the Apple ID Password to use Back to My Mac. I've obtained several new Apple ID passwords which work ok on my phone but doesn't seem to be the password it's looking for.Does anyone know what's needed please ??

    It's probably looking for the Apple ID & Password you used to purchase Lion, or ML as the case may be.
    Thse are the Mountain Lion forums, is that what you meant?

  • Can I use the IRig to plug in my guitar on my mac book Pro or it just works in ipad, ipod and iphone?

    Can I use the IRig to plug in my guitar on my mac book Pro or it just works in ipad, ipod and iphone?

    From their website:
    Got a Mac? Get an iRig!
    Now for the hidden features… if you have a newer Mac computer, you can use the iRig as an audio interface for it. The newer Mac models feature a headphone jack that act as a headphone/microphone input for headsets. This means that you can also use your iRig with your Mac laptop or desktop machine to take advantage of the higher processing power of your machine and you don't need an additional audio interface to use it. Simply plug the iRig into your headphone jack, plug your headphones/line out into your iRig and you've got a fully functioning audio interface for guitar/bass/keyboards, or any other instrument with a ¼" out. Pretty cool.

  • Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts..

    Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
    Rp

    1. in physical connections part can i use the same work schema
    2. Can i use same contexts created or do i need to create everything as new and then try?
    Thanks,
    Rp.
    Hi,
    As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
    Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
    And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)

  • Do I need to buy a new printer, dedicated for my Mac or can I use the same one we use for our PCs?

    Do I need to buy a new printer, dedicated for my Mac or can I use the same one we use for our PCs?

    Hello stacksofamber and welcome to Apple Support Communities,
    You should be able to find a Mac OSX driver for that printer. Did you check with the manufacturer/'s website?

  • I can't use the (sort by )feature, or open the emages to watch this item - I used to be able to do this with firefox and all of the sudden it stopped working

    I tried to log in :
    http://uae.dubizzle.com/motors/used-cars/land-rover/range-rover-sport/?price__gte=&price__lte=&year__gte=2006&year__lte=2009&kilometers__gte=&kilometers__lte=&seller_type=&keywords=&is_basic_search_widget=0&is_search=1&added__gte=&company_item_id=&auto_agent=
    I can't use the
    - (sort by )feature Lowest to highest for example ,
    - or open the emages to watch this item
    I used to be able to do this with firefox the old version and now all of the sudden it stopped working,
    I tried to clear cash & coockies & un install and reinstall fire fox but nothing works.

    You can try these steps in case of issues with web pages:
    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • A65-S159 - I can't use the CD Recovery because my CD/DVD doesn't work properly

    Hi, I need help to reinstall the system and drives. It's a Satellite A65-S159. The CD/DVD doesn't work properly. Rarely, the CD/DVD can read a DVD. So I can't use the CD Recovery. What may I do?
    Thank you,
    Cabula, Brazil

    There are two ways to run the recovery DVD, one is from Windows.  Instead power ont he computer with the disk in the drive.  And imediatly after powering on start pressing the F12 key.  After a few seconds you should see a boot device menu that you can select the CD/DVD drive to boot from.  Try that and let us know if you got the boot menu, and if the disk worked.
    This signature left intentionally blank.

  • Can i Use The Apple Wired Keyboard With Camera Connector Kit

    Can i Use The Apple Wired Keyboard With Camera Connector Kit
    3g 64gb verizon

    People report it is still possible to use a wired USB keyboard with the CCK, if you use a powered USB hub to get around the "not enough power" error message.  (I have done this with an older Apple USB keyboard my non-jailbroken iPad1 on iOS 4.3.3.)  Normally, powered USB hubs have a AC power adapter so you lose portability unless you can find a battery powered USB hub.  At this point, the (in)convinience of the USB hub becomes an issue, depending on what you get.
    And wired USB keyboard were never supported for the iPad.  So there's no guarantee that it will continue to work with future iPad updates from Apple.  So best to go with a Bluetooth keyboard unless you have a specific USB keyboard that you "must" use.  If you have all the equipment already, I say give it a try.  But I would not recommend trying a USB keyboard if you have to purchase anything.

  • Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help

    Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help.

    Thank you for the answers so far, but I'll make one correction: I said earlier that the Boston Globe website, boston.com, does not have a mobile site, and I would need to visit their regular website on my iPhone. Actually, I just found out that boston.com has a mobile site, so I'd obviously use that instead of the regular site. By doing that, I'd save a ton of data (I think). Does that change your answers?

  • HT2216 I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly.  That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse.  Any clues?

    I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly.  That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse.  I only have a previous version re-install disc as I bought the latest OSX off the app store.  Any help gratefully received?

    Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • I uninstalled ver 11, installed ver 10.7 because ver11 won't work on my XPsp3 machine with my vinyl conversion software to mp3, but upon launch i get :"itunes library.itl cannot be read because it was created with a newer version of itunes'.

    I uninstalled and deleted ver 11, installed ver 10.7 because ver11 won't work on my XPsp3 machine with my vinyl conversion software to mp3, but upon launch i get :"itunes library.itl cannot be read because it was created with a newer version of itunes'.

    Hello, Stephen.
    Thank you for the question.  You will need to rebuild your iTunes library file in order to open an older version of iTunes.  Below, I have included the article that walks you through this process.  Start with the section labeled Re-creating the iTunes Library file.
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/ht1451
    Cheers,
    Jason H. 

  • How to repair disc on second partition iMac 27? 10.6.8, but second is still 10.6.3.  Can I use the original 10.6.3 install disc to start, and then go to the side needing repair?

    Partitioned iMac 27, Sept. 2010.  Verify disc on HD2 says "corrupted,  needs repair," unspecified.  "Use install disc to repair."  HD2 is isolated from Internet since birth.  HD 10.6.8, but HD2 is still 10.6.3.  Can I use the original 10.6.3 install disc to start, and then go to the side needing repair, without a problem?
    Part 2:  After 4 years, suddenly when HD2 is revived from sleep, it makes an Internet connection, all settings are the same, Network shows Ethernet is unplugged, but the indicator from modem shows connection.  Maybe connected to first part of my question, but maybe not.
    Thank you.

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • Can I use the Camera Connection Kit to transfer files from my Mob/PS3/iPod?

    Can I use the Camera Connection Kit to transfer files from my mobile/iPod or Playstation 3 to iPad using a USB cable?
    I have an *iPod nano 16GB 5g* & my mobile is a *Samsung G800* and *Playstation 3 80GB*.
    _Thanks for reading_

    The CCK will find/ask to download (if iPad supported formate )picture and video files if the device is formated in FAT 16 or 32 and the supported files are placed in a "DCIM" folder in the root directory. I have transfered such files from SD card and USB drives. However, not USB drive work. I had an old 2GB (very large) and when i connected it it said it drew too much power.
    I also downloaded pictures and video files from a compact flash card and smart media card via a SanDisk USB card reader.
    AppleIpod60GB wrote:
    No. The CCK is only designed to allow you to import photos from a digital camera via USB or an SD card. You cannot import any data via this kit and no other files will work as it's designed for only the functionality it does. The kit looks for a folder with the label "DSC####### the same structure as most digital cameras, and will only function with JPG files.
    Message was edited by: lllaass to add CF and SM info

  • I already have adobe digital editions on my mac pc and download books from the library to my android e-reader. Can I use the same digital editions on my ipad air, or do I need to load a different one onto my ipad?

    I already have adobe digital editions on my mac pc and download books from the library to my android e-reader. Can I use the same digital editions on my ipad air, or do I need to load a different one onto my ipad?

    Try following forum:
    Adobe Digital Editions

Maybe you are looking for