I need the dialog box (which contains page selection etC) HOW TO MAKE IT?

hi
i have done an requirement in smartforms.
i need the dialog box (which contains output device name, page selection etc) when i take the print (smartforms).
And now i already can see a dialog box .but still it doesn't have the page selection.
I mean if the smartforms which have 5 pages,and what i need is just print the page 1 and page 3 . so I need the page selection
which can help me on this issue.
Would anyone know something about it and give me some advice . I will be appericate it.

Hi,
Just check with the control parameters of the function module, if you have changed any of it.
If you have changed it then try to give the no-dialog field of the control parameter table as space.
If the dialog box which gives you the Output device name and others appears then just below the output device name you have the column for the page selection.Just pass the values of the pages separating them with comma(like 2, 5 will print second and fifth pages) and it prints only those pages.
Regards
Sarves

Similar Messages

How do i resize the Dialog box which executes while baGetFolder command.

Dear friends
I am very new to director and working for the project which is already developed by some other vendor. in this project i have to implement the below mentioned requirment so can anyone pls help me upon this will be greatfull.
How to resize the dialog box which appears while the command baGetfolder triggers. Actualluy the problem i am facing is the title of the dialog box extends its width so the title appears incompleted with "....", how can i solve this problem?. It is very urgent requirment and eagely waiting for yours reply.
thanks in advance

Hi sean wilson,
Thank you veru much for your great help. The title of the dialog box is now adjusted into two lines after changed the" flag" value to 1. Your suggestion is very helpful and excellent. I hope you will be here to help those people who are struggling with technical problems. Once again i wish to thankyou much.
Thanks and Regards
E.VenkateshKumar
Chennai
India.

The dialog box that contains the Firefox icon stays on my desktop even though I've already loaded it into my applications folder. How do I remove it????

I updated to Firefox 4.0 and moved the Firefox icon into my applications folder and tool bar. However, the dialog box with the icon still sits on my desktop. How can I remove it??? Thanks for your help.

OMG I think I just figured it out.... I was dragging the disk icon to the apps folder. I was supposed to drag the icon within the pop up window to the apps folder. As you can tell, I'm a PC user and new to mac! I think this is going to solve the mystery!

After updating firefox (on MAC), everytime I start Firefox there is an open installation dialog box - which I cannot figure out how to delete.

I have used Firefox without problem, on my Mac, for several years. I recently updated to v22.0. Now every time I open Firefox, there is a dialog box (marked "Firefox , 2 items") that appears, with the Firefox icon, and arrow pointing right, and a folder icon. It looks like I am asked to install Firefox again. I've done this several times, but the dialog box never disappears. I have right-clicked, and hit "eject firefox only." The dialog disappears, but then reappears the next time I open Firefox. Firefox seems to be functioning normally, but this installation glitch is annoying. How can I resolve this?

More info, in case it helps anyone else with this problem:
I got a PM from waycool007 on 10/12/13 which said,
Hi Alice -
Thanks for trying to help me - regarding the question regarding the firefox dialog box.
I am opening firefox from the icon on my dock. It then opens the annoying installation/dialog box.
If I open firefox from the applications folder, it actually opens properly.
... to which I answered,
You need to close Firefox if open and then delete the Firefox icon that is in the dock. You can then start Firefox from the applications folder and, when the new Firefox icon shows up in the dock, use the control click option to keep it there.
Let me know if this fixes it.
I just got this reply:
I followed your instructions, and Firefox is now working normally. This has been bugging me for at least two months, and you solved it in a minute. Wow. Thanks!
(You're welcome!)

When I right-click on an image, the dialog box (copy image, save image, etc) is now tiny

The right-click menu recently changed - it now only shows a max of three menu items in a very small box.
Compounding the problem is the speed at which the menu items scroll. It's so quick that I can't pick the menu item I want. I have to use the up or down arrow keys.
Any ideas?
Thanks

You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

How to suprress the dialog box when we run the URL in the IE

Hi,
Is there any way to supress the dialog box which will ask for userid and pwd of the current SAP Box from where its being executed. Even if we enter the URL of the BSP application in the internet explorer I am getting the popup box for userid and pwd.
Regards
Ganesh

Hi,
You can supress the dialog box by entering default user ID and password in the application node in your SICF transaction. This is hardcoding sort of method.
Other way is like this,
Go to the BSP application SYSTEM. Execute the the page "sso2test.htm " to test the Single Sign on.
Pass on the User name & password via the URL as follows,
http://<host>:<port>/sap/bc/bsp/sap/system/sso2test.htm?sap-user=myName&sap-password=myPassword&sap-client=myClient
If single Sign on is enabled then the BSP page will not ask for a password.
The same thing you can follow in your own BSP application.
If SSO is not enabled then you need to go to the RZ10 transaction change the following parameters.
login/create_sso2_ticket
login/accept_sso2_ticket
login/ticket_expiration_time
Look at this link it would be helpful,
http://help.sap.com/saphelp_webas620/helpdata/en/5c/b7d53ae8ab9248e10000000a114084/frameset.htm
Hope this solves the problem. For further quiries pls revert back.
Regards,
Ravikiran.C

I am attempting to update a page onmy website and the dialog box asks for a password for "50.63.96.1 I have no password and never needed one before. Please advise. Thanks, Regina

I am attempting to update a page onmy website and the dialog box asks for a password for "50.63.96.1 I have no password and never needed one before. Please advise. Thanks, Regina

That would be the password for your FTP server. You can only get this from your web hosting company. You should contact your web hosting company and ask them for your FTP Publishing details.
Then select your web site name at the top of the list of web pages in iWeb. You'll see input fieldd for your FTP details. Enter what you get from your web hosting provider in those fields.

I have a 3rd generation ipod nano. I upgraded to lion. I tried to buy an audio book and download it to my nano like I have done at least 50 times before. Now the dialog box states that I need an ipod touch for the same function. MacBook Pro 2008 w/ m.trac

I have a 3rd generation ipod nano. I recently upgraded to Lion which is causing lots of issues. Aside from that, I went to the Itunes store to purchase books like I have done at least 100 times before with no problems. Now I can by the book and get it to my computer, however when I tried to download the book to my 3rd generation ipod the dialog box informed me that to download any new audiobook purchases I would need an ipod touch. My ipod nano 3rd generation serves my purposes just fine. Why should I be forced to buy something I do not want just to continue something I have always done seamlessly? I know this is more of a rant than a question but I am sure someone else out there has had this happen to them. Maybe you could share your thoughts on how to work around this issue if possible?

I forgot to add the last obvious and crucial step I had taken - plugging a different iPod into my system. It was also not recognized. That was the final proof I needed to determine if the problem was device or system. But now what?
I truly appreciate any help I can get!
Thanks again...

I no longer get a dialog box when bookmarking a page. I am unable to title and save the bookmark in the folder of my choice. Where has the dialog box gone please.

Whenever I have bookmarked a page, I got a dialog box where I could give the bookmark a title and choose the folder to save it in. Now when I click 'Bookmark this page, no box appears. The page is still saved in bookmarks but then I have to go into Organize bookmarks to put it where I want it. This is time I have not had to spend doing so in the past. I would like to know what has happened to the dialog box, why has it stopped appearing as normal? I really would like it back.

It was Mcafee SiteAdvisor 3.3 of all things that caused the problem. Can anyone suggest a better/equivalent type of extension I could use?
Thanks,

Which shortcut can I use to move the highlight in a dialog box to the first field in the dialog box?

I am working with FrameMaker 10. There used to be a keyboard shortcut for moving the highlight to the first field in a dialog box. Without this command I do not know how to move the highlight to the field I want to modify. I assume the highlight is on a random field when my script enters the dialog box.

In iPhoto
You need to switch Photo Stream on from System Preferences > iCloud not from iPhoto.
See instructions here > iCloud - Learn how to set up iCloud on all your devices.

How do I get rid of the dialog box and audio that is in the bottom left of the screen that keeps telling me what I'm doing or need to do?

How do I get rid of the dialog box and audio that is in the bottom left corner of the screen running script and audio of what I'm doing or need to do?

Go into System Preferences, select Universal Access, turn off Voiceover.

How to insert a dialog box which prompt the user enter the general information in the SDI application?

Im using the SDI application to build a system and now i would like to insert a dialog box which allow the user to enter the general information about themselves and then it will be saved into a text file. How to insert the dialog box and show the dialog box at the beginning of the program.

Hi Lee,
The easyest way to achieve this is to declare an object of your dialog box derived class (e.g. CUserInfo, public CDialog) into the InitInstance method of the main application class.
Depending on the behavior you want you can place the code before dispatching the commands from command line (in which case the main frame of the SDI application will not be shown), or after, in which case the UserInfo dialog box will be shown over the main application window as modal.
The code snipped bellow can be more helpfull:
BOOL CSDIApp::InitInstance()
AfxEnableControlContainer();
// Parse command line for standard shell commands, DDE, file open
CCommandLineInfo cmdInfo;
ParseCommandLine(cmdInfo);
//prompt user for data
CUserInfo dlg;
if (dlg.DoModal() == IDOK)
//do something here with the data
else
return FALSE;//i.e. quit the application if the user presses the 'Cancel' button
// Dispatch commands specified on the command line
if (!ProcessShellCommand(cmdInfo))
return FALSE;
// The one and only window has been initialized, so show and update it.
m_pMainWnd->ShowWindow(SW_SHOW);
m_pMainWnd->UpdateWindow();
return TRUE;
Hope this helps,
Silvius
Silvius Iancu

I cannot remove the dialog box from my ipad. It says 'not enough storage' I click on settings and close, but still there. I need help. thx

I cannot remove the dialog box from my ipad. it says 'not enough storage'. I click on settings and close but still there. How can i remove this message? Thnx

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

How do I save passwords; the dialog box has no yes option

Whenever I fill in a user name then fill in a password, the dialog box appears asking if I want to save the password. There is a drop down box offering two options, to save or not to save. I choose to save which is in fact the default. However, there is no place to confirm or click ‘yes’ or ‘OK’, just the small ‘x’ in the top right corner. I click that and the box goes away, but the password is not saved!

You can try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
It is possible that there is a problem with the key3.db and signons.sqlite files that store the encrypted names and passwords in Firefox. 
Rename the key3.db and signons.sqlite files in the Firefox profile folder. 
You can add .old to the file names (key3.db.old and signons.sqlite.old) or move them to another folder to make it possible to undo the action. 
You need to set a new Master Password after renaming or deleting key3.db and all currently saved passwords are lost. 
If that has worked then you can remove the renamed files that are no longer needed.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox

I don't have my navigation bar at all. I tried to start in safe mode but I never get the dialog box the y say you should get to reset to defaults. Help?

i don't have my navigation bar at all. I tried to start in safe mode but I never get the dialog box the y say you should get to reset to defaults. Help? I have even uninstalled and reloaded firefox
== This happened ==
Every time Firefox opened
== My wife hit a button and doesn' know what happened

See if this helps. View > Toolbars, if no check beside Navigation Bar, click on Navigation Bar to check it.
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
''Windows'' Method 2. Tap once on the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
''Windows'' Method 3. Tap once and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See:
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
http://kb.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.18; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r45; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-''In Windows,'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-''In Windows,'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, '''but''' do look at the two bulleted items at the bottom "'''NOTE for IE:'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

I need the dialog box (which contains page selection etC) HOW TO MAKE IT?

Similar Messages

Maybe you are looking for