I need to add the logic for posting key,

I need to add the logic for posting key, if posting key = 50 then amount is credit (add negative sign in amount field).
I creadted this scenario in mapping, We wanted to make sure that the negative sign was placed in the amount field if the posting key was = 50.  So it seems we are good.  We will just need to test.
How i can test this case?
Please do needful.
Thanks in advance.

Hi,
You need to use an IfElse node function in your mapping in which the input should be the posting key from the source structure.
You need to check in the IfElse statement whether the posting key=50, if it is true, then use concat node function to concat the negative sign("-") along with the original value to be passed to the amount field on the target side. Else, if the condition is false(i.e posting key!=50), then simply pass the value to the amount field as it is without adding the negative sign.
After the mapping is done, go to the test tab and then insert the values in the source fields and then execute from the lower left button showing start transformation.  You need to test with the value of posting key=50 once and with the value not equal to 50 once.In the first case, the output amount field should have the negative sign, which should not be present in the second case.
You will find your target structure in the righter half of your screen. That's it mate
Thanks
Biswajit

Similar Messages

  • How to find out the table for Posting Key and A/R & A/P Document types

    hi folks,
    can you let me know which TABLE is used to Posting key and also which TABLE is used for Account Receivables and Account Payables.
    Thank you in advance.

    To find the table of posting key, select any posting key at OB41, then press F1, then click on hammer icon the table used will be displayed. For Posting Key TBSL is the table used.
    Posting Key TBSL
    Customer Master (General)  KNA1
    Customer Master (Company Code) KNB1
    Vendor Master (General) LFA1
    Vendor Master (Company Code) LFB1
    Satish
    (please close the thred if u satisfiy with the answer)

  • I need to add the Description for a field to the dispForm.aspx page

    I have some information stored in the description area of a field that needs to show up on the dispform.aspx page. It shows up on the editform.aspx but not dispform.aspx
    I know there has got to be a way to do it with some JQuery or something, can someone steer me?
    L.

    Hi, I know this is an older post but I was looking for the same guidance.   I couldn't find it either.  :) 
    So I started working backwards from this command that I know works for displaying the history of the multiline boxes when there are multiple versions:
    <tr><td class="ms-formlabel">Comments</td>
    <td class="ms-formbody" colspan="3"><xsl:value-of select="@Comments" disable-output-escaping="yes" />
    <SharePoint:AppendOnlyHistory runat="server" FieldName="Comments" ControlMode="Display" ItemId="{@ID}"/></td></tr>
    So checking out the “SharePoint: AppendOnlyHistory” brought me here:
    http://msdn.microsoft.com/en-us/library/office/microsoft.sharepoint.webcontrols.appendonlyhistory(v=office.15).aspx
    Which I followed until I found this …
    http://msdn.microsoft.com/en-us/library/office/microsoft.sharepoint.webcontrols.fielddescription(v=office.15).aspx
    So with some experimenting I found that this works: 
    <td class="ms-formlabel"><SharePoint:FieldDescription runat="server" FieldName="ESCFReason" ControlMode="Edit" ItemId="{@ID}"/></td>
    <td class="ms-formbody"><xsl:value-of select="@ESCFReason" disable-output-escaping="yes" /></td>

  • Need to add the patch for Canon 5D mark III raw files to Photoshop. Where can I find it?

    Hi Friends,
    I am editing on my lap top for the first time since buying the Canon 5D Mark 3. My Photoshop (5.5) does not recognize the
    raw files. Where can I download the update?
    Thanks in advance,
    Esther

    The 5D Mark III was also supported in Camera Raw 6.7
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    which is compatible with CS5
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    In CS5 click Help > Updates should install Camera Raw 6.7.
    If not, download it manually
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5603

  • I need to extend the schema for iPlanet Dir. 5.0 and add custom objectclasses and atributes. I do this by adding entries in the 99user.ldif file. Its not working. Any ideas?

    Hi
    I need to extend the schema for iPlanet Dir. 5.0 and I do not want to do so from the console. As per the documentation, I need to either add entries in the 99user.ldif file or define my own custom [00-99]myname.ldif file. I tried this but its not working.
    I have made the assumption that there is no explicit import step for the 'user defined' schema files (as it is for user data ldif files). I assume that on start (or on opening the console), I'd be able to see the new schema after the server has read the schema file.
    I have verified that entering new objectclasses and attributes from the console adds entries into the 99user.ldif file. So why is the reverse process not working. Can anybody throw some light on this? Also in case my assumptions are faulty, please let me know.
    I did not change the aci entries in the existing ldif file. Is any modification needed there? I was logged in as the Directory Manager during this testing process.
    regards
    Sikka ([email protected])

    Hi Sikka,
    The server reads its schema configuration on startup. If you manually modify the schema files while the server is running, it will not have any effect. You have to restart the server.
    The console adds the new schema elements over LDAP (you could do that as well, you only have to modify the cn=schema entry), so the server is aware of the changes immediately and thus restarting is not needed.
    I hope this helps.
    Bertold

  • Urgent -Need to Add new values for the LOV field in forms

    HI,
    I am customizing an existing form. In that i need to add some values for the LOV fied which can be used during run time.
    Please Can some one help me in doing this?
    Thanks
    Suresh P

    Go to Navigator and edit the LOV or create a new one.
    hope that helps!

  • Need the Logic for this Prg issue Pls

    Hi Friends,
    i have an urgent requirement..
    i am develop the report that is :
    Based on Selction Critirea kunnr(knvv-kunnr)
    i want Delete the
             Internet mail (SMTP) address FROM ADR6-MTP_ADDR
    AND Teletex number FROM ADR4-TTX_NUMBER..
    USING TABLES ARE KNVV , ADR6 AND ADR4.
    please how to Write the LOGIC For this Program .
    help me.. it is an urgent.. anyone.
    regards,

    Hi Alchermi,
    thanks for your reply soon.
    based on selction kunnr .. i want deete the ADR4-TTX_NUMBER..and ADR6-SMTP_ADDR From these 2 tables
    for these 2 fields..
    kunnr from knvv, selection field..
    below fields want be DELETED..
    ttx-number from adr4,
    smtp_addr from adr6.
    it is an urgent. help me .
    regards,

  • In Dreamweaver, I need to add the directory to the File being inserted in the following Insert Code:    MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param2", 202, 1, 255, Request.Form("DocLocation")) ' adVarWChar

    I have the following code:
    <%
    If (CStr(Request("MM_insert")) = "form1") Then
      If (Not MM_abortEdit) Then
        ' execute the insert
        Dim MM_editCmd
        Set MM_editCmd = Server.CreateObject ("ADODB.Command")
        MM_editCmd.ActiveConnection = MM_NewFLSSARDB_STRING
        MM_editCmd.CommandText = "INSERT INTO DocumentTable (Title, DocLink, UpdatedBy, UpdateDate, Type, Comments) VALUES (?, ?, ?, ?, ?, ?)"
        MM_editCmd.Prepared = true
        MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param1", 202, 1, 255, Request.Form("DocumentName")) ' adVarWChar
        MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param2", 202, 1, 255, Request.Form("DocLocation")) ' adVarWChar
        MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param3", 202, 1, 255, Request.Form("UpdatedBy")) ' adVarWChar
        MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param4", 135, 1, -1, MM_IIF(Request.Form("UpdatedDate"), Request.Form("UpdatedDate"), null)) ' adDBTimeStamp
        MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param5", 202, 1, 255, Request.Form("Type")) ' adVarWChar
        MM_editCmd.Parameters.Append MM_editCmd.CreateParameter("param6", 203, 1, 1073741823, Request.Form("Comments")) ' adLongVarWChar
        MM_editCmd.Execute
        MM_editCmd.ActiveConnection.Close
        ' append the query string to the redirect URL
        Dim MM_editRedirectUrl
        MM_editRedirectUrl = "testFLSSARSuperAdminIndex.asp"
        If (Request.QueryString <> "") Then
          If (InStr(1, MM_editRedirectUrl, "?", vbTextCompare) = 0) Then
            MM_editRedirectUrl = MM_editRedirectUrl & "?" & Request.QueryString
          Else
            MM_editRedirectUrl = MM_editRedirectUrl & "&" & Request.QueryString
          End If
        End If
        Response.Redirect(MM_editRedirectUrl)
      End If
    End If
    %>
    For param2 above I need to add the directory "Docs/" to the command so that the file can be found by the User.  How do I do that?

    If all documents are going to the "/Docs" folder, then I wouldn't include it in the inserted data as you can just add it dynamically where needed. If you do want to include it and it's not part of the posted form data, then just concatenate it (&) prior to inserting into the table.

  • In my opinion, I think the rolling function of Muse need to add the group status function and group!

    In my opinion,
    I think the rolling function of Muse need to add the group status function and group!
    Because when the processing of many things, but the effect is the same,
    but to repeat many times, it is necessary to group similar function of PS.

    I learned how to install the 9.1.3 upgrade by renaming my app, and that works fine. Logic is now recognized in About My Mac as a 64 bit app, which is where I started. Thanks for your help.
    Now I have to figure out how to get my Novation to work through Automap in some way that I can finally get mixer functions. I'll repost the second part of this if I'm still having a headscratcher about it tomorrow.

  • Getting error while creating form and report on webservice: ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.

    i am using the following description to create a web service reference:
    web reference :REST
    Name :Yahoo Map
    URL :http://local.yahooapis.com/MapsService/V1/mapImage
    HTTP Method: GET
    Basic Authentication: No
    Add Parameter:
    Name       Type
    appid        String
    location    String
    Output Format: XML
    XPath to Output Parameters : /Result
    Output Parameter:
    Name       Path       Type
    Url          /text()      String
    Then i tried to create form and report on webservice:
    Web Service Reference Type: Yahoo Map
    Operation: doREST
    All the fields i keep as default
    I tick the checkbox (url)in report Parameter
    After clicking next whereever required i click create button
    I get the following error
    ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
    Please someone help to solve this as i need to fix it urgently.

    i exported the application from apex.oracle.com and imported it to our environment
    import went fine, but when I ran the IR page I got
    ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
    evidently the problem is a lack of public execute on DBMS_LOB, which is used in the generated IR source.
    while waiting for the DBA to grant privs on DBMS_LOB, changing the dbms_lob.getlength call to length() fixes the IR.
    however, i am not getting the download link on the associated form page... changed templates, that's not the issue -- we'll see if that's a dbms_lob issue as well

  • APEX:Getting error while creating form and report on webservice: ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.

    I am using Apex 4.2.2.00.11
    am using the following description to create a web service reference:
    web reference :REST
    Name :Yahoo Map
    URL :http://local.yahooapis.com/MapsService/V1/mapImage
    HTTP Method: GET
    Basic Authentication: No
    Add Parameter:
    Name       Type
    appid        String
    location    String
    Output Format: XML
    XPath to Output Parameters : /Result
    Output Parameter:
    Name       Path       Type
    Url          /text()      String
    Then i tried to create form and report on webservice:
    Web Service Reference Type: Yahoo Map
    Operation: doREST
    All the fields i keep as default
    I tick the checkbox (url)in report Parameter
    After clicking next whereever required i click create button
    I get the following error
    ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
    Please someone help to solve this as i need to fix it urgently.

    336554,
    Looks like there is a 127-column limit on the number of report columns supported when using that wizard. Do you have more than that?
    57434

  • Can anyone please give me the logic for this....

    I have a database table and in it i have a field department code. now, that department code might have '00' or '   ' (blank) or anyother value. now i want to add up all the currency amounts with department code '00'  and '  ' (blank) which have same company code and currency type. I called all the entries with '00' into one internal table and enrties with '  ' (blank) to other internal table.
    can anyone give me the logic for adding all the entries at a time.
    thanks in advance.....

    HI Srinivas
    i have a solution for this question.
    Use At control break statement for this.
    Loop the internal table.
    Use at Event AT LAST. In that use SUM Statement. U will get sum of all the numeric fields.
    Or else u can use ON CHANGE OF Currency type
    then find the total amount by adding previouse value with ur current value.
    Like itab1-amount = total + itab1-amount.
    Appent this into ur internal or write it into ur report.
    Reward me if its useful.
    Regards
    Ravi

  • How 2 Set the logic for report 2 run 1st of everymonth......

    Hi Experts,
    i ve developd a HR-ABAP report in that Some part of code will Mon-Fri, Excluding Public holidays and sat & sundays...( i.e no public holidays and no sat & sundays)
       and some part of should Run on 1st of everymonth.... but 2 parts of code should be in same report..
    How can set the logic to run the report respective times....
    Thanks in Advance....
    sudeer.

    you can code this but need some good expertise on fm's  , date handling techniques and subroutine call coding.
    1.
    to make the code run only on 1st of every month
    capture the rundate of ur prog .. take value of  sy-datum
    ex.. 01.xx.yyyy
    or date std will be yyyymmdd so check for dd = 01 ..
    so per logic first two chars show that its first of any month in any year ..
    if yes
    execute the logic for the first of every month ..
    endif.
    2.
    where the code needs to be run on mon-fri and not on public holidays / sun / sat ..
    first fetch the day based on date .. like mon or tue or wed .. except sat and sun..
    second check whether if m-t-w-th-fr if any of them is  a holiday or not
    u need to check the date in the calender list like tholi thoc and .. to check whether that is a holiday or not ..
    coming to sat and sundays .. u need to check the day for date using function modules and build the logic ...
    br,
    vijay..

  • How to add  delay logic for 30 msec?

    Hi,
    I need to add delay logic to my program, which has to wait for 30 msec, for creating spool requests.
    plz help me

    HI Friend,
    You can use WAIT UP TO n seconds to delay.
    Check out this link:
    http://www.geocities.com/rmtiwari/main.html?http://www.geocities.com/rmtiwari/Resources/Utilities/ABAPReference/ABAPWAIT.htm
    Regards,
    Chandra Sekhar

  • I have recently changed by email login password for my emails i have managed to change them in my setting for my iPad but need to change the settings for my MAC computer but i cannot see to do it help please

    i have recently changed by email login password for my emails i have managed to change them in my setting for my iPad but need to change the settings for my MAC computer but i cannot seem to do it help please?

    Mail/Preferences/Accounts
    Use the - and + signs to delete or add your new Accounts
    see
    http://support.apple.com/kb/PH4928
    Mac 101
    http://support.apple.com/kb/index?page=search&src=support_site.kbase.search&loca le=en_US&q=deleting%20mail%20accounts

Maybe you are looking for

  • Cannot delete message from Trash

    Hi I have more than 10,000 deleted messages under Trash, in a folder named "on my mac". When I try to empty that folder o just empy the whole Trash, Mail crashes due to the high volume. I would like to delete those messages from the Finder, but I can

  • Convert pdf to word doc with data

    Adobe X Pro - File > Save as > Microsoft word > word document doesn't save the data.  How can I get the data too?  Thanks

  • BADI MB_BAPI_GOODSMVT_CREATE

    Hi I have appended custom  fields in MSEG table. Now i want to update the custom fields using BADI MB_BAPI_GOODSMVT_CREATE during GR document creation. I went thru forum, but no proper answer for this? Pls confirm which way its possible to update the

  • Active/Standby And failover link configuration mode

    Hi everyone, When config failover  link of ASA  in Active Standby mode. When we config failover int say gi0/1 config t int gi0/1 failover lan int gi0/1 Need to confirm we do this from interface config mode  only or we can do this from global config a

  • DB::truncate

    We have a replicated environment with one master site, and one slave, running Berkeley DB XML 2.5.16 on top of Berkeley DB 4.8.26. When we run XmlManager.truncateContainer() from our Java code (which in turn calls the truncate function on a __db stru