I need to adjust the tempo of a commercial song imported from iTunes

I need to reduce the tempo of a commercial song which I imported to GB from iTunes by ~6%. Can I do this in GB, and if so, how?

If you need a precise value, I suggest using an audio editor (e.g. Audacity, which is free) to achieve this - you can add numerical values there. If you use GB, you can only adjust the tempo in integer steps, and the percentage value depends on the tempo you start with.
What you could do in GB is the following:
• set the song's tempo to 100
• import your audio file
• turn the orange region into a purple one and check "follow tempo & pitch"
• set the song's tempo to 94.

Similar Messages

  • Everytime I try to download a song purchase from itunes I get the error message. 'Unable to Download Song' could not be downloaded at this time. I cannot even sync with itunes on the PC.

    Hi guys,
    I need some everytime I try to download a song purchase from itunes I get the error message. 'Unable to Download Song' could not be downloaded at this time. I cannot even sync with itunes on the PC.
    Kind regards
    Ian

    One correction, from the icloud I was not able to listed to the entire song.  So when you purchased the song if it wasn't downloaded to your library, chances are you have lost your opportunity to listen to it.

  • Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.   Is th

    Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
    Is there another way to adjust tempo of loops the faster way, any other technique?

    No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault.  And b) check the health of your RAM and the hard drive.
    The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording.

  • How do I adjust the tempo of a drum track inserted in Audition multitrack session?

    (Note: for the Audition 101 user)  In a multitrack Audition session, what is the best way to adjust the tempo of an inserted drum track to sync up with the already metronome-established tempo of recorded rhythm tracks (guitars & vocals)?

    Time Stretch the clip. Either by trial and error or, if you know the tempo of the inserted track, by calculation.

  • How to adjust the tempo of a project by mouse tools in globe track

    I remember I once saw a movie on Apple official web showing how to use the mouse tool to "draw" the tempo in the globe track to catch the tempo of a live recorded project .
    It seemed that it's very simple in the movie , but not by using the" adjust the tempo by using the region length and locators" .I remember the guy in the movie just draw some line in somewhere in the globe track and the tempo will change automatic and correctly to catch the percussion audio track ....
    But I cannot remember the detail now.. somebody here watched this movie before ?
    I try to make it , but I failed all the time ....
    Thanks!

    Look for "Beatmapping" in the manual

  • What do you do if you need to adjust the audio mid clip?

    In Final cut X can you adjust the audio in the middle of a clip? It seems that the fades are only at the beginning and end of each clip. What do you do if you need to adjust the audio mid clip?

    Range tool (click R)
    select range
    drag audio line ...

  • HT1751 This was extremely helpful, however, all the songs I had unchecked in my library are now checked on on my new MacBook.  My playlists are all there, but I do I really need to uncheck the ~3,000 - 4,000 songs I had previously unchecked?

    All the songs I had unchecked in my library are now checked on on my new MacBook.  My playlists are all there, but I do I really need to uncheck the ~3,000 - 4,000 songs I had previously unchecked?
    My original library exists on my old computer, so I could still transfer it.   Any suggestions are welcome and appreciated - thank you!

    This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • HT201269 I am not finding my backup of my Iphone 5 that I backed up in itunes. I need to put the old information on my replaced phone from Apple care.

    I am not finding my backup of my Iphone 5 that I backed up in itunes. I need to put the old information on my replaced phone from Apple care.

    the itunes back up can be found in preferences/devices on ur itunes
    the preferences can be reached by going to:
    windows pc: edit/preferences
    mac pc: itunes/preferences
    check ur icloud as well in case u had the 'back up to icloud' option checked instead of the 'to this computer' option when u backed it up to ur itunes.
    if neither of those have ur back up then ur back up is not in that pc and not in ur icloud for that apple id. it might be somewhere else (another pc maybe) or it doesnt actually exist.

  • HT4061 I just tried updating my iPhone 4GS and it says I have an error, and need to "restore" the phone before I can use it with iTunes??? I don't want to lose the pictures on it!  What can I do to save them?

    I just tried updating my iPhone 4GS and it says I have an error, and need to "restore" the phone before I can use it with iTunes??? I don't want to lose the pictures on it!  What can I do to save them?

    Swayzeone wrote:
    I just tried updating my iPhone 4GS
    No, sorry... did not happen becasue no such model exists.
    If the device is in recovery mode, any data on it is already lost. 
    The only options are:
    Restore the device to get it functional.
    Enjoy the paper weight.
    For what reason did you attempt to update the device without first ensuring that your data was safe, meaning backing up the device and copying important pictures/videos taken with the device to a computer?

  • Hi I have an iPhone 4 and suddenly it stopped working. Could here notifications and nothing on the diisplay. Wake up  button on top is not working. so unable to restart the phone. Wanted to try restore from iTunes but Find my iPhone (iCloud) is on.

    Hi I have an iPhone 4 and suddenly it stopped working. Could here notifications and nothing on the diisplay. Wake up  button on top is not working. so unable to restart the phone. Wanted to try restore from iTunes but Find my iPhone (iCloud) is on. How to recover or restart my Phone

    Follow these steps to log into your iCloud account on your computer and deactivate "Find my iPhone" on your device:
    Remove an iOS device or Mac on which you can’t turn off Find My iPhone
    If you can’t turn off Find My iPhone on the device, turn off the device so it goes offline, then remove it from Find My iPhone on iCloud.com.
    Note:    You can also remove your iOS device by first erasing it—just follow the instructions below for removing an iOS device you don’t have. You can later restore the device from an iCloud or iTunes backup.
    Turn off the device you want to remove.
    Sign in to icloud.com/#find on another computer with your Apple ID (the one you use with iCloud). If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
    Click All Devices, select the offline device, then click Remove from Account. If you don’t see Remove from Account, click All Devices again, then click the Delete button next to the device. If the device comes online again, it will reappear in Find My iPhone. If your device reappears, turn off Find My iPhone on the device (follow the instructions above for removing a device by turning off Find My iPhone), or if it’s an iOS device and you no longer have it, follow the instructions below for removing an iOS device you no longer have.
    Remove an iOS device you no longer have
    If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
    Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud). If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
    Click All Devices, then select the device.
    Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.
    Note:    If you’re trying to erase a family member’s device, that person will need to enter his or her Apple ID password on this device. If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
    When the device is erased, click Remove from Account.All your content is erased, and someone else can now activate the device.
    copied from: iCloud: Remove your device from Find My iPhone

  • HT1420 what is the sales tax added to songs purchased from apple store?

    what is the sales tax added to songs purchased from apple store?

    The amount of Tax Payable varies and is dependant on your location...
    You will need to investigate that yourself...

  • I have lost my iPhone but can seem to get the find my iPhone app to work from iTunes. pease help

    I have lost my iPhone but can seem to get the find my iPhone app to work from iTunes. pease help

    much like insurgence then you need to enable my iphone before it's lost it can't be don afterwards

  • TS3694 I got my cracked screen fixed , and ever since my phone has been acting up. Now Im trying to restore it and it wont restore. Also my phone wont work without being on the charger. It just wont disconnect from ITunes Can I get help ASAP

    I got my cracked screen fixed , and ever since my phone has been acting up. Now Im trying to restore it and it wont restore. Also my phone wont work without being on the charger. It just wont disconnect from ITunes Can I get help ASAP

    nadiamilan wrote:
    I think that is an great idea . But I wanna know if there is anything else i can do besides going all way back to the place i got if fixed at ....
    Probably not.

  • HT201401 I have my a song purchased from Itunes and would like to use part of it for a ringtone and get all the way thur the process of getting it to my phone but it goes to sync to my phone it doesn't show up in my phone like it says it is suppose to und

    I have my a song purchased from Itunes and would like to use part of it for a ringtone and get all the way thur the process of getting it to my phone but it goes to sync to my phone it doesn't show up in my phone like it says it is suppose to under ringtones. Does anyone have any tips on how to do this.

    http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/
    https://discussions.apple.com/message/17777381 - making a ringtone
    Getting ringtones folder to show in iTunes - https://discussions.apple.com/thread/2629494 - iTunes > Preferences. Under the General tab below Show, confirm Ringtones is selected

  • HT1689 i have over 5000 songs on my computer. Which is from songs bought from iTunes and from cd. i had all the songs on my iPod. went to download new songs and only 1500 songs are download . please help

    i have over 5000 songs on my computer. Which is from songs bought from iTunes and from cd. i had all the songs on my iPod. went to download new songs and only 1500 songs are download . please help

    Since all of your music came from your computer in the first place, then it should still be there and should be included in your backup copy of your computer.
    " it told me when i pluged hers in 2 ipods could not use the same account"
    This is not true.  You have misunderstood.
    You can sync as many ipods/iphones/ipads as you like to one one library.

Maybe you are looking for

  • Error while opening a component in ACC

    I am getting error while trying to open component in ACC. I can the component is running, but when tried to open it (either thro Open component or by double clicking on it) am getting the following error. Any idea on the cause of this error? Server e

  • Compiling the java file related to Servlet and Core java files in heirarchy

    I am working in Jakarta-Tomcat 4.0.4 with j2sdk1.4.1_01 and i have put all servlet files in package "com.java.servlet" and other core java files in package "com.java.action" . Also I am imorting java files in package "com.java.action" to the package

  • Why does TO_CHAR not like me adding a fraction then specifying FF?

    Why does TO_CHAR not like me adding a fraction? SQL> SELECT TO_CHAR(TO_TIMESTAMP('1/1/2012', 'DD/MM/YYYY') + .733409047, 'HH24:MI:SS') FROM Dual; TO_CHAR( 17:36:07 SQL> SELECT TO_CHAR(TO_TIMESTAMP('1/1/2012', 'DD/MM/YYYY') + .733409047, 'HH24:MI:SS.F

  • G550 replacemen​t keyboard key?

    Hey guys. Do you know where can I get a replacement for a G550 Key? will keys from other models will do as well? Thank you so much

  • IPad 3 screen sluggish

    My iPad 3 screen became for no apparent reason almost unresponsive. A character appears 2 seconds after I type it, I can't really scroll etc. I first tried hard reset, now I restored to factory setting. It did not help. Is this faulty hardware? Thank