I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem

I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem

I need to align the margins of my forms with those of my website, I have looked at all the options and unfortunately I am unable to do it with access to the Adobe.form.min.CSS file which I can't access as a consumer, how else can I fix my problem

Similar Messages

  • Issue with path reference in apex.min.css file using Theme 25

    Hi all.
    I upgraded recently to Apex 4.2.1.00.08 and my existing applications had been working fine. I then thought I'd changed the theme to Theme 25 as it was a new one available to me. This was fine and the application works well however I wanted to test a change to the css so I copied the apex.min.css file and renamed it as apex.min_copy.css. I made my small change, which was just a change to the background colour of the table in apexir.WORKSHEET. I then uploaded this through the shared components and referenced it in my header using
    #WORKSPACE_IMAGES#apex.min_copy.cssI also commented out the referenced to #APEX_CSS# in the header so it would use my uploaded copy and not be overridden.
    When I then ran the application again, it prompted me for the xdb username and password. I tracked this down to lines in the css file where the relative path to an image in the file was like ../ws/image_name
    For example:
      background-image : url(../ws/report_bg.gif);I took these lines out, uploaded again and it was fine and my change was visible, meaning that the #WORKSPACE_IMAGES#apex.min_copy.css was being read correctly. I can also browse the location of these files on the xdb database using a browser connected a system and I can see the files where i expect them to be.What I cannot understand is how other references to images in this css file such as
    background : url(../apex/builder/dev-bar.png) 0 0 repeat-x transparent;
    background-image : url(../htmldb/builder/builder_find_bg.png);do not cause an issue but the one mentioned earlier(/ws) does
    I hope someone has an idea .
    Thanks,
    Colm Dickson

    Mark,
    Modifying the default files is dangerous and ill advised. You could always just add a style sheet (inline or linked) to your application that overrides that one setting while you wait on the permanent fix.
    Regards,
    Dan
    http://danielmcghan.us
    http://sourceforge.net/projects/tapigen

  • I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?

    I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?
    I have a 2012 mac book pro can I use that to connect with firewire and load osx that way? and how woudl I do that?
    Thanks so much!

    To what password are you referring? Do you mean your user account's admin password? Or do you mean the master password for File Vault or do you mean a Firmware Password?
    For an admin password:
    Forgot Your Account Password
    For Snow Leopard and earlier
         Mac OS X 10.6- If you forget your administrator password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.
    If you cannot do the above then try this:
      1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
      2. At the prompt, type the following commands pressing return after each command line:
         /sbin/fsck -yf
         If you do not receive a "Filesystem OK" message then repeat this command until
         you do.  If after seven tries you still do not receive a "Filesystem OK" message,
         then the system is corrupted and needs to be reinstalled.
         mount -uw /
         cd /private/var/db/netinfo
         mv local.nidb local.old
         rm ../.AppleSetupDone
         shutdown -r now
    The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
    This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
    How to reset the OS X password without a startup CD:
    Reboot into Single-user Mode. Enter the following and press RETURN after each command line
       1. Type fsck -fy
       2. Type mount -uw /
       3. Type passwd <username>
    I have never tried this method myself.

  • Hi everyone. I am trying to download ML on my iMac and when I click the download button, I am asked for my PW which I provide and then the ML icon launches in launchpad but nothing takes place. Have been trying for 2 days and this is driving me nuts. Help

    Hi everyone. I am trying to download ML on my iMac and when I click the download button, I am asked for my PW which I provide and then the ML icon launches in launchpad but nothing takes place. Have been trying for 2 days and this is driving me nuts. Help

    Yes it does and there is an indication that the software is downloading but after a few hours, it just stops without any error message. Everything simply disappears and I need to start over again. I have a superfast connection so it should no be this slow. Everything worked fine on my MBP and I am in the same place. Any ideas

  • The ipad mini with retina free apps by apple have disappeared? e.g. keynote and imovie. i gotthem free with my ipad then when i deleted them i could still re-download them but now they cost money to download. i hope someone know how to fix my problim

    the ipad mini with retina free apps by apple have disappeared? e.g. keynote and imovie. i gotthem free with my ipad then when i deleted them i could still re-download them but now they cost money to download. i hope someone know how to fix my problim. thanks

    Just want to add.
    I replied to them for a waiver., and they reply with quite a similar email again, without helping.
    The customer service IMO just use a template to answer question. Refer me back to the developer , which is apple itself

  • My iPad mini won't install the latest update because there isn't enough stprGe. I have deleted everything from my iPad and there still isn't enough storge.

    My iPad mini won't install the latest update because there isn't enough stprGe. I have deleted everything from my iPad and there still isn't enough storge.

    Connect your iPad to your computer and run iTunes. Select your iPad in iTunes and try to run the update there. Updating requires a lot less free space on the iPad when updating through iTunes on a computer because the update files will be downloaded to and extracted on the computer.

  • When making a photo book, my iPhoto freezes during uploading the book to the store after assembly.  I have attempted this 4 times now and I don't know what to do! I know the file size is massive due quantity of large images. How can I get past this?

    When making a photo book, my iPhoto freezes during uploading the book to the storey.  I have attempted this 4 times now and I don't know what to do! I know the file size is massive due quantity of large image files, but I don't want to reduce the image file size and compromise quality in the book. How can I get past this?
    My macbook air is os x 10.9, using iPhoto 11 9.5 (902.7).

    Try Old Toad's solution here:   See   Re: iphoto : upload impossible to print a book
    Try to boot into Safe Mode and order this way, or sign into a different user account and try to order as a different user.
    Léonie

  • I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server.

    I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server, but this message continues to pop-up several times a day at random intervals. Is there something I'm doing wrong? Or is my computer just having a glitch? Other than that, and a mildly sticking caps lock button, it's working perfectly.
    Thank you!

    Alright it didn't solve it. Any other suggestions?
    I haven't suggested a solution yet. I want to know whether you still get the messages while Time Machine is disabled. Do you? If so, try any or all of the solutions proposed in this thread:
    There was a Problem connecting to the...: Apple Support Communities

  • Hi we have apple credentials for downloading OS and creating Provisioning profiles. Now we are trying to upgrade the Mac OS 10.7.3 version. do we need should buy this version from appStore. or can it be download from the apple site for free?  Many thanks

    Hi we have apple credentials for downloading OS and creating Provisioning profiles. Now we are trying to upgrade the Mac OS 10.7.3 version. do we need should buy this version from appStore. or can it be download from the apple site for free?  Many thanks in advance!

    Whether you need to buy Mac OS X 10.7.3 depends on what version of OS X you have now.
    If you have OS X 10.6.x or lower it is a paid upgrade from the Mac AppStore.
    If you have OS X 10.7.x it is a free upgrade you get using Software Update on your Mac.

  • I cannot install adobe flash onto my mac, whenever the installation box appears it asks for a password! I have entered my apple ID password and any other password I use, but still no joy! Any advice?

    I cannot install adobe flash onto my mac, whenever the installation box appears it asks for a password! I have entered my apple ID password and any other password I use, but still no joy! Any advice?

    Exactly where are you getting your Flash from? It is quite free from the maker, no password needed.
    http://get.adobe.com/flashplayer/
    However, if you fell for a trap and were lured into a fake site to rob you of your Apple ID credentials, I suggest you change your passwords immediately.

  • A .pdf file is causing my notebook to freeze up. When I highlight it to delete, it will also freeze up the notebook. How else can I get rid of the file?

    A .pdf file is causing my notebook to freeze up. When I highlight it to delete, it will also freeze up the notebook. How else can I get rid of the file?

    Back up all data, then boot from your recovery partition (command-R at startup), launch Disk Utility, select your startup volume, and run Repair Disk (not Repair Permissions.) If any problems are found, repeat. Then reboot as usual.

  • I find it ABSOLUTELY unacceptable that since recently safari opens up random "commercial websites" without me clicking on any link. And it does that without allowing me to go (back) to the site I really clicked on. STOP THAT!!!!!!

    I find it ABSOLUTELY unacceptable that since recently safari opens up random "commercial websites" without me clicking on any link. And it does that without allowing me to go (back) to the site I really clicked on. STOP THAT!!!!!!

    There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
    If you have trouble following those instructions, see below.
    Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
    The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
    Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination  command-C:
    /Library/LaunchDaemons
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
              com.something.daemon.plist
    and
               com.something.helper.plist
    Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
    If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
    /Library/LaunchAgents
    In this folder, there may be a file named
              com.something.agent.plist
    where the string something is the same as before.
    If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
    Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
    The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
    Open this folder:
    /Library/Application Support
    If it has a subfolder named just
               something
    where something is the same string you saw before, drag that subfolder to the Trash and close the window.
    Don't delete the "Application Support" folder or anything else inside it.
    Finally, in this folder:
    /System/Library/Frameworks
    there may an item named exactly
                v.framework
    It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
    Don't delete the "Frameworks" folder or anything else inside it.
    If you didn't find the files or you're not sure about the identification, post what you found.
    If in doubt, or if you have no backups, change nothing at all.
    The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.

  • HT4818 I have installed bootcamp that worked properly.  Then I have partitioned the OS X 10.8.2 and installed another OS X 10.8.2 and I have got two MAC boot options and Bootcamp disappeared from the Option menu. How can I boot Windows again and keep both

    I have installed bootcamp by the bootcamp assistant and worked properly.
     Then I have partitioned the OS X 10.8.2 and installed another Mountain Lion System and I have got two MAC boot options and Bootcamp disappeared from the Option menu. However, Bootcamp still remained in the Startup Disk in the System Preferences. When I tried to boot Bootcamp using the Startup Disk it did not boot and received a message that there is no bootable device. I have not lost any data and can read Bootcamp partition from both OS X systems. Please advise how can I boot Windows / Bootcamp again? Thank you. 

    Recommendation 1: Use a VM for this. It's essentially a giant C.F. to do this with native booting, and is potentially fragile.
    But if you're going to ignore that and do this anyway, realizing that it can break anytime in particular with OS upgrades, and that it's very difficult to impossible to resize the three volumes once you've installed the systems:
    1. create three partitions, setting each to be the size for OS X copy 1, copy 2, and Windows respectively. The Windows partition needs to be set to MS-DOS format (actually FAT32) which later in the Windows installer you'll reformat as NTFS. Do not use Boot Camp Assistant to resize/partition the disk, it simply won't work for this use case.
    2. install OS X copy 1
    3. install OS X copy 3
    4. Use gdisk (available at sourceforge) which is a command line only application, to create a new hybrid MBR adding only the last partition (Windows) to the hybrid MBR and setting it to be bootable. As a concequence you will not be able to see/share either OS X volume from within Windows. The Windows NTFS volume will be visible from within OS X.
    5. Install Windows to the only partition its installer should see (confirm size), you'll need to format it NTFS first, and I suggest using the fast format option if available.

  • I recently downloaded the iTunes 11.0.5 for Mac OS X and the iTunes store comes up as a blank page. I have already tried re-downloading iTunes and that didn't work... How can I get it to work?

    I recently downloaded the iTunes 11.0.5 for Mac OS X and the iTunes store comes up as a blank page. I have already tried re-downloading iTunes and that didn't work... How can I get it to work?

    I was able to fix mine. I went to software update and updated a few things. I did not update everything, but only what I thought were the essentials, which I believe was Safari, a security update, and a firmware update.
    Then I deleted and reinstalled Itunes yet another time. Now the itunes store is back up again.

  • I have a 10.6.8 OS and want to upgrade to Mountain Lion but when I try the applications tells me my computer can't support it

    I have a 10.6.8 OS and want to upgrade to Mountain Lion but when I try the applications tells me my computer can't support it. What does that mean. I have upgraded to Snow Leopard and was told (by Mac Store) that after that I would be able to update to Mountain Lion.

    Welcome to Apple Support Communities
    You need 10.6.8 to upgrade to Mountain Lion, but it doesn't mean that your computer is compatible. Mountain Lion is compatible with Late 2008 Aluminum or Early 2009 MacBooks. If you have an older one, you can't upgrade to Mountain Lion. Read > http://www.apple.com/osx/specs
    If you can't upgrade to Mountain Lion, open  > About this Mac, and tell me what processor and memory you have got. If you have a Intel Core 2 Duo or newer processor, you can upgrade to Lion. Call Apple to purchase Lion > http://support.apple.com/kb/HE57 Make a backup of your files before upgrading and check that your apps are compatible > http://www.roaringapps.com

Maybe you are looking for

  • Mac OS X 10.7.4 Broke OpenGL Profiler, how to fix it?

    So as it says, 10.7.4 doesn't allow OpenGL Profiler to work with an applicaiton. Break points, viewing reasources, etc doesn't register. I found this thread: https://discussions.apple.com/thread/3958500?start=0&tstart=0 But could not find out how to

  • Having issues linking spry menu bar to my other pages

    Hey everyone, I am brand new to web development. I am currently using the trial of DW and I must say I love it. I am having issues with my spry menu bar though. I will click on a certain box in the menu bar and use the properties page at the bottom a

  • XaResource.prepare Method Error

    When we execute the xaresource.prepare(); throws an exception of: RuntimeException in method: public abstract void transaction.bean.TransactionManager.insert(common.valueObject.VOInsert,java.lang.String) throws java.lang.Exception,java.rmi.RemoteExce

  • Opinions about freebsd 7.x ?

    Hi All, I am currently a very happy 11 year Arch / RHEL / fedora user but always looking for a new challenge. So I am thinking about switching my desktop pc / home server from Arch64 to FreeBSD. I read a lot of stories here about people switching to

  • Script to Change Paragraph Numbering

    Hi. I am really new to scripting (please don't hurt yourself laughing at my code below )  and need some help! The issue: The documents I author go through a translation process which takes the InDesign XML data and exports my text into a web browser