I need to configure Acrobat to display PDF files in Safari, but I have a lot of troubles to do it.I have OX S yosemite, I unistalled adobe acrobat, I closed safary and I installed the new version of adobe acrobat.
Dear everyone
I need to configure Acrobat to display PDF files in Safari, but I have a lot of troubles to do it.
I read a european commission document explaining that
http://ec.europa.eu/research/participants/data/support/sep_usermanual.pdf
If Safari does not display pdf forms in the browser window, uninstall all older versions of Adobe Reader and download the most recent one. First close Safari and then install Reader. Launch Safari and you ought to be able to open the pdf files inside the Safari window. If you install Adobe Reader 10.1.x without first closing Safari, Safari will not display the pdf file inside its browser window until it is re-launched. For further help, please see http://helpx.adobe.com/acrobat/kb/troubleshoot-safari-plug-acrobat-x.html
I have OX S yosemite, I unistalled adobe acrobat, I closed safary and I installed the new version of adobe acrobat
but when I open a web page that I need to allow me to display and modify PDF files it is not working.
I checked the following web page
Troubleshoot Safari plug-in | Acrobat X, Reader X
that is recommending the following:
The AdobePDFViewer plug-in is used to display PDF files in Safari using Acrobat and Reader.
This plug-in is installed as part of the Acrobat X or Reader X installation. The location of this plug-in is:
/Library/Internet Plug-ins/AdobePDFViewer.plugin
but after the new installation with this folder is completely empty and I am still
unable to open these pdf.
Does anybody knows anything else I can do?
Best regards
Ramon
Moving this discussion to the Adobe Reader forum.
Similar Messages
-
I am trying to install the new version of Adobe Player on my Mac. I download it but can't install it. When I go to install it I get a security screen with my user ID and it asks for my password. I have reset my password but still can't get it to be accepted so I can't download the player
Hello,
Please see What userid & password do I need to install Flash Player?.
Maria -
I need to install the new version of adobe flash player and cant?
I cant open my catalogue and view it on facebook etc as i need to install the new version of adobe flash player and cant, when i try and download, i get so far and it says close the internet exporer and then wont install it?
When i install, it comes up at the end, please close internet explorere
down to continue, and when do, and click retry and it still wont complete
the installation?>
Pat Willener http://forums.adobe.com/people/pwillener created the
discussion
"Re: I need to install the new version of adobe flash player and cant?"
To view the discussion, visit:
http://forums.adobe.com/message/5137329#5137329 -
i canot install the new version of adobe flash player so i con not listen to the songs posted on fb
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version, 10.2.152.25, 10.3.x beta, or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. The first one on the list, Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work. -
To install the new version of adobe muse (german version).
I have problems to install the new version of muse (german version). Everytime comes a sign which says: The application could not be installed because the installer file is damaged. Ask the application author is a new installation file.
Could you please uninstall the copy of Muse from your machine (In case of Mac, make sure it is deleted from Trash as well) and use the following link to download and install a fresh copy of Adobe Muse :
Mac : http://www.adobe.com/go/muse_latest_mac
Windows : http://www.adobe.com/go/muse_latest_win
Or
Please follow the steps mentioned in this document :
http://helpx.adobe.com/muse/kb/installer-file-damaged.html
Hope this helps.
Regards
Rajshree -
How do I choose and then install the correct version of Adobe Flash Player for my machine?
First thing - My computer - PROCESSOR: Intel Celeron 450 @2.2 Ghz, MEMORY: 4GB, OS: Windows 7 Home Premium SP1 64 bit, BROWSER: IE 9.0.8112.16421
Everything was hunky-dory until the auto-installer updated my version to the Flash Player 11.2 version and that's when it all went downhill. As soon as it installed that version, none of the TV networks, news networks or Hulu recognized that I had Adobe Flash Player. In addition, I could no longer create a blank new tab in IE or use the tools button (the little gear symbol) in the upper right hand of an IE window. Because of the IE problems, I figured it was a problem with IE and went about searching for a solution in that arena. I finally found something at Microsoft that helped me determine if it was an IE problem and went through the various steps. The final step required booting into safemode and trying to replicate the problem. IE worked fine in safemode so, Microsoft determined the problem had to be with outside influences.
After several frustrating attempts with other fixes including virus scanning and firewall settings, the problem persisted. I then un-installed Flash Player per Adobe's instruction and re-installed the recommended 'latest' version. The problem remained. So, when all else had failed I did a full system restore to a point over a month ago, which is prior to the occurence of the problem, while at the same time noting which drivers and programs would be affected. I already had a sneaking suspicion that it was Flash Player because I read the full system requirements for the recommended version that the auto installer was trying to install (see below). I then began updating everything one at a time to see if any of the windows/software/driver updates had any affect on IE. None did until I got to the Adobe Flash Player and updated it.
Now, what I think the problem is: The auto installer ONLY looks at Operating System and Browser to determine which version of Adobe Flash Player is correct. In this regard, my machine should use the latest 11.2 version. HOWEVER, if you look at the full system requirements for the 11.2 versions, you will note that it requires a...... 2.33 Ghz processor! In this regard, 11.2 is NOT the correct version for my machine as it only has a 2.2 Ghz processor. And I think therein lies the problem.
So. I freely admit that I am not a computer expert and am, in fact, so far removed from ever even contemplating wearing such a title that I'm sure all who read this are sitting in your offices having a good laugh at my expense. As such, I welcome anyone and everyone to tell me what I've done wrong and how I should go about fixing it. If my deductions are correct, then could someone please tell me how to choose the correct version for my machine and then tell me how to actually install it on my machine.
I know that this is a long post and I thank you all for your patience and any help you choose to offer me.Mr. Willener,
Thank you for your reply.
I did un-install and then re-install per the Adobe recommendations which are what you listed in your reply. The problem remained until I did a MS Windows restore to a restore point a month or so ago. The IE problems vanished. However, now I'm using an outdated and unsupported version that is lower than most of the web pages require for their sites, at least the ones I want to view (they all say I need to upgrade my Flash Player which, when I did, put me in this fix).
As to:
Pat Willener wrote:
Usuallyexasperated wrote:
it requires a...... 2.33 Ghz processor!
You can safely ignore that requirement; it is simply not true.
Why would Adobe post a system requirement of 2.33 Ghz for 11.2 if it simply were not true?
Message was edited by: Usuallyexasperated -
I need help I can't get my computer to recognize my ipod nano 7th....going through all the steps...NOT HELPING LOL
Backup with iTunes. If iTunes is asking you if you want to backup, say yes to that and it will backup your iPad. Have you ever synced with this computer before?
My boilerplate response for anyone that wants to update the iOS.
What you should do anytime that you update the device is to transfer purchases from the iPad into iTunes - File>Transfer Purchases - and you should backup the iPad as well. When you update the update the device, if something goes wrong, you can restore from the backup.
However, iTunes should ask if you want to backup before you update, but just in case create the backup yourself before you update. The backup contains your app data and settings - along with other items - so make sure you backup first.
If you have any other important files, you may want to transfer them to your computer as well, prior to the update.
How to transfer purchases into your iTunes library
http://support.apple.com/kb/HT1848
How to backup and restore from a backup
http://support.apple.com/kb/HT1766 -
I always update Firefox and have the latest 8.0. This had never happened before. I tried to execute it twice, but still got the same message. I have Windows XP.
See Troubleshooting issues with iTunes for Windows updates.
For downloading issues see the further information area and use a different browser and/or the direct links.
tt2 -
Hi. I was trying to open some pdf files and got a message my adobe reader was deinstalled. I installed a new version of Adobe Reader for Mac and when trying to open a PDF file I am getting a message in a foreign language. Any suggestions?
Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.
-
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue and if i must, how dI reintall iTunes without loosing my content?
P.S. I am able to sync postcasts and music though!http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125
http://support.microsoft.com/kb/299357 -
So basically when I installed the new version of iTunes and reopened the program it was as if I started brand new. All of my playlists, songs, and podcasts no longer exsisted. Is there a way to restore everything back to normal? I still have all of the files on my comp, but re importing them wont bring back my playlists...
See Empty/corrupt library after upgrade/crash.
tt2 -
I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by the SX50, with which I never had any problem. Does anyone have a suggestion on how to fix this problem? Thanks.
Camera Raw plug-in | Supported cameras I do not see that SX60 as supported. Just how new is the SX60 when was it announces. Its support is not even listed in ACR 8.7 RC
-
I am trying to open a pages document however it tells me I need the new version to do so. I have installed the new version however it keeps saying I need the new version. I have noticed that I still have the old blue ink pot icon not the new orange pen.
Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.
-
So I just updated my MacBook Pro and installed the new version of iPhoto and rebooted it and now there is a logo of the world blinking on my screen and it will not go away please help
You can force quit by holding the power button down for extended period.
During boot up hold down the Option key and choose your Macintosh HD OSX.
In >System Preferences> Startup Disk>choose your internal OSX System as Default.
Maybe you are looking for
-
Time Capsule (simultaneous Dual-Band II) that is reporting problems
my TC is giving me this error.. both my macs are backing up fine but only one can access the internet.. any advice?? for the record, i just had a new cable modem put in and have gone through all the reset options..
-
Iphone Notes - how do I change the default mail address?
This a variation of the question of why my notes FROM the Iphone do not sync into Outlook Notes, anymore. In my Iphone Notes set up, it refers to my gmail address as the default address. In my Mail, I have two Outlook addresses, with one being the d
-
watup? quik question icant seem to open my transport window menu on logc express 7.2 like the legend or the position slider please help thanking you guys in advance, also i cant get sound out my mic im using an ozone controler need to know in steps h
-
hi This is prasad.i have gone thru the forum of the theoritically.but in real work how the interface will take place between the system.can anyone explain with a diagrammatically view. Regards prasad
-
Extensions Panel greyed out in Photoshop CC
Hi, I wondered if anyone can help? Extensions under Windows is greyed out. I have checked my preferences. Any ideas?