I need to connect my LED cinema display to nvidia quadro 4000 graphics card
I cant find any adapter to connect my "LED cinema display" to the brand new graphics card "nvidia quadro 4000 (for Mac pro)"
As i coldnt find any information since now, ihope someone can give me a hint.
They included the wrong DisplayPort to Mini DisplayPort adapter. The correct adapter should have a female Mini DisplayPort connector, not male. You could buy the correct adapter or you could add a F-F Mini DisplayPort coupler
<http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042804 &p_id=6502&seq=1&format=2>
Try calling the, and asking for the correct adapter. They fo say:
"Connect to mini-DisplayPort displays through the included adapter cable"
<http://store.apple.com/us/product/H3314LL/A/nvidia-quadro-4000-for-mac>
Similar Messages
-
How do i connect a led cinema display 27" to notebook with hdmi port
how do i connect a led cinema display 27" to notebook with hdmi port
This is the way we did it:
Get this 5 inch Mini Displayport Female to Displayport Female Coupler:
http://estore.circuitassembly.com/products/5-inch-mini-displayport-female-to-dis playport-female-coupler.html#
Then get a DisplayPort to HDMI cable
http://www.startech.com/Cables/Audio-Video/DisplayPort/DisplayPort-to-HDMI-Cable -Male-to-Male~DP2HDMI2MM6
This combination will enable you to connect your CinemaDisplay (mini-display port) to your HDMI input on your laptop or PC -
What do I need to connect my apple cinema display to new macbook pro
what do I need to connect my apple cinema display to new macbook pro?
2011 macbook pro with TB -> apple 27" Cinima Display with mini-displayport
Does this work natively? Is there an adapter or workaround?
No, not until or if an adaptor becomes available. See this thread.
Apple display and Thunderbolt compatibility -
How to connect old LED Cinema Display to new iMac
How to connect old LED Cinema Display (Mini DisplayPort)
to new iMac (thunderbolt port)?
Ideas?Just plug it into the Thunderbolt port. That port directly supports mini-DisplayPort screens.
http://www.apple.com/thunderbolt/
Regards. -
what cable do I need to connect my 20in cinema display to my 2008 imac as I want to use it as adual screen?s, what cable do I need to connect my 20in cinema display to my 2008 imac as I want to use it as adual screen?s
Hello, depends on which 20in Cinema, but likely...
Apple Mini-DVI to DVI Adapter
http://support.apple.com/kb/HT3235 -
What cable do I need to connect a 30in Cinema Display to a 2013 Mac Pro
what cable do I need to connect a 30in Cinema Display to a 2013 Mac Pro
No.
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter> -
I have a macbook connected to LED cinema display. The display started to flicker. The display turns black for a second or two. Sometimes I restart macbook and display. Sometimes it helps.
same issue, either your wiring or display itself is going bad. for me, it was the display but luckily still under warranty
-
How to connect a 2009 Cinema Display with mini DisplayPort to modern card
Hello:
I am ready to install a new NVidia Quadro K5000 for Mac in my not so old Mac Pro 4,1 (2009). I already installed Mountain Lion (10.8.3) as required. The problem is that the Mac Pro came with a Led Cinema Display which apparently only can be connected with a mini DisplayPort plug and the graphics card only have DVi and DP 1.2. I tried to find an adapter but the ones I have find are minidp male to DVI female and obviously I need a minidp female to DVI or DP female.
I will appreciate any help.
Alex SierraThe fifth and sixth item on this page are DisplayPort male to Mini DisplayPort female "Extension cables". Under US$6 plus shipping from a reputable seller:
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10246#1024602 -
How can I connect a LED Cinema Display to Intel-based iMac?
My iMac24" (Intel-based 2.8 Ghz Core 2 Duo) has a Mini DVI Output. The LED 24"Cinema Display has a Mini Display Port. Is there an adapter available to use the Cinema Display as an Extended Desktop?
Need help urgently! Thanks.no 3rd party solutions available?
As I said, there are no converters available, from any source.
What makes the DisplayPort special compared to a MiniDVI?
You can read up on DisplayPort here:
http://en.wikipedia.org/wiki/Displayport
That article lists some purported advantages. -
What do i need to connect my 30" cinema display as a second monitor to my new 27" imac?
I recently purchased a new iMac and want to run my 30" cinema display as a second monitor. My local mac experts told me to use a mini display to dvi adaptor, but that didn't work for any of my cinema displays - the 30" that i want to use and a 21" that I have. I called the guys back up and after a little research, he told me to get a mini display port to dual link dvi adapter. This costs $99, so I want to be sure it's going to work.
Does anyone know if this will work, or if there is a better idea, or ****, does the new iMac even except a 2nd monitor.
Thanks. Looking forward to your input.Well I may have heard wrong, but I do not believe that you can hook that 6 year old monitor to the latest 27" iMacs with ThunderBolt. I would do more research before putting out the bucks, or make sure that you can return it if it does not work.
But do let us know if you try it and it works. -
How do I connect a second Cinema Display to a Radeon 9600 PRO card?
I have a G5 dual (PowerMac7,2) with a Radeon 9600 pro card running an HD cinema display (clear plastic) and want to connect a second smaller 20" Cinema Display with the same type of plug - I think I need a DVI to ADC adapter - is this the case?
Thanks in advance for any suggestions.Yes, this is the case.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=7E5 0FEF9&nplm=M8661LL/B
Also, read this:
http://docs.info.apple.com/article.html?artnum=75286
Especially Note 3 at the bottom. -
Apple Cinema Display 23-inch with PCI graphics card on a PC...?
My wife has a Dell Dimension 2400 PC along with a Mac G4. The Mac will obviously drive the 23-inch display with no problem, but the PC has on-board graphics which are awful. The only improvement is via a PCI graphics card, and a KVM switch (using the DVI interface on both Mac and PC). Does anyone know of an inexpensive PCI graphics card which will cope with the 23-inch display? Gaming is not on the list of priorities, but page layouts for posters and small (8-page) brochures is what it's needed for.
The Dell's operating suystem is XP Professional, and the G4's is Tiger. Thanks for any help.
ChrisI got the blue&white G3 w SDRAM/6GB.
do you think http://www.amazon.com/gp/product/B00DC1P8VA/ref=ox_sc_act_title_1?ie=UTF8&psc=1& smid=A1EF9OE38VX40W
will solve this? I believe I need a DVI-D female to VGA male adapter?
That adapter is for connecting a VGA display to a computer's DVI port.
If your computer has the ATI Rage 128 graphics card it will have one DVI port and one VGA port. It won't run both ports simultaneously.
If the display has a DVI plug, plug it into the computer's DVI port. No special cable or adapter is needed, but the computer may not support the resolution of the 23".
If the display uses ADC (Apple Display Connector)
<http://upload.wikimedia.org/wikipedia/commons/thumb/0/09/AppleDisplayConnector.j pg/220px-AppleDisplayConnector.jpg>
you will also need a DVI to ADC adapter
<http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2> -
CONNECTED TO LEAVE MY MACBOOK LED CINEMA DISPLAY
HELLO FRIENDS MY QUESTION IS: IS SUITABLE LEAVE MY MACBOOK CONNECTED TO LED CINEMA DISPLAY ALL THE TIME OR MORE AND CONNECTING TO COMPLETE THE CHARGING THE BATTERY.
TKSTake a look at the Displays preference panel to see if everything is ok, particularly the resolution and refresh rate. Displays will probably try to put the panel for the ACD on the ACD where you won't see it. So click "Gather Windows" to get the ACD panel on to your macbook.
One more thing, make sure you fully seated the mini displayport plug. They can be sneaky little devils in that they need to be fully pushed in. -
Macbook Air, Firewire and LED Cinema display
Hello,
I want to connect my Saffire Pro 40 (firewire) to my Macbook Air (thunderbolt), but i am unsure
what to do.
I could connect the newly released firewire thunderbolt adapter to the macbook air, but then i
wouldn't be able to connect my LED Cinema Display as the only is one Mini-display port.
Anyone has any tips?
Best regards...JanNo cheap solution here. The Thunderbolt Display is what you need.
The Matrox DS1 Thunderbolt docking station is missing the Firewire Port. -
Urgent help please. Can't get image on LED cinema display.
My husband has a traumatic brain injury. His existing monitor went kaput yesterday, & I've been trying desperately to set up a new LED cinema display with his Mac Pro that was purchased May 2007 for the past 4.5 hrs without success. Can't get any image on it & don't know what else to try. Any suggestions please?
Can we assume that the graphics card has been replaced with one that has a mini display port, such as the Radeon HD 5770 or the Geforce GT 120? The originally shipped graphics card options for the 2007 Mac Pro do NOT have the Mini Display Port.
Does my computer have a Mini DisplayPort connector?
If not, one will either need an Atlona AT-DP400 adapter to connect the LED Cinema Display to a dual link DVI port of the graphics card OR to replace the graphics card with one that is equipped with the Mini Display Port.
Review of the Atlona AT-DP400.
Also, does the Mac Pro have OS X 10.6.4 or later?
Maybe you are looking for
-
Hi my name is vishal For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp. Given below is my code in c# on how
-
Not authorized to use UME application
Greetings, we have installed the Solution Manager 4.0 on AS ABAP+Java. The installation and post install completed successfully. We updated the SP6 to SP7. During the post installation, we performed a client copy using 001 as our source client i.e. 0
-
How to use a SAP table in Validation Look Up
Hi Experts, I my job for every record in the input data set I need to check for the value of the data set column in the SAP table. I am using a validation transform and am using the "Exists in Table" option, where I am specifying the column in the SA
-
I have several signature entries in the signature file of Mail>Preferences>Signatures. i want to apply each signature randomly to outgoing messages. However, when I open a new message form, the signature block indicates non-assigned with none in the
-
My ichat keeps saying my password is incorrect but then on my phone it works fine
i keep trying to log in to ichat and it says my password is wrong and has me retype it over and over again but then on my blackberry i have no problem