I need to find out how to contact upeer management to try and resolve an issue before I open a complaint with the Attorney Generals Office as well as the Better Business Bureau and social media.

I have been with Verizon for 15 years. I have a family share plan with 2 smart phones a standard phone and a jetpack for wireless access. I pay for insurance on the 2 smartphones. Approximately a year ago I made a payment arrangement to continue service on my account even though I had some business difficulties. I was told that while the arrangement was in place I could not make any changes to my account. However, since then I have had the following issues and when I try and contact Verizon to try and resolve them I am place on eternal hold or disconnected.
Issue #1: My daughter lost her phone in June 2014. (The contract on this phone was up in 2013) I have been told that I cannot replace the phone even though I pay the insurance premium of $9.95 a month. I have been billed for it and have also been charged $54.87 for the monthly service as well. The phone has not made or received a call since June 4, 2014 yet I have been charged $274.38 I just was able to have the service suspended at the store today, 11/29/2014
Issue #2 My phone has intermittent flaws, locking up and reuring rests, dropping calls, failing to receive calls etc along with horrible battery life. I went into the local verizon store and they ordered me a refurbished replacement phone which was subsequently sent to me. When I received it I took it to the store to have them assist me in setting it up properly. I was told that I should NOT set it up but send it back due to some physical damage present on my old phone that would most likely result in a $150 charge...it was recommended that I just upgrade my phones as they were all out of contract and that would be the best solution. I asked the manager if that would be possible due to the "terms" on my account and she said "it would not be a problem". I was interested in an Iphone 6 which was not in stock so I sent the replacement phone back and left, to wait for the phone to become available.
Issue #3 I had a JetPack that was recently stolen from my car. I stopped in to ask what to do about it (it is no longer under contract either) They suspended the service and recomended I wait until I upgraded my other phones and then get a new Jet Pack. I just received noticed that they were going to continue billing me for it this week, even though it has been out of contract for several months??????
I recently went to Best Buy to take advantage of their Black Friday deals and was told that based on the status of my account I was ineligible for any upgrades. We called Verizon from the Best Buy and they told me that I needed to address my account status (I just made the scheduled payment on the 23rd of Nov) either with Financial Services or go to a Corporate Store. I went to the store and was told there was nothing that could be done at that level, I would need to talk to financial services (which was closed)
So, I am extremely frustrated and upset with this whole situation and wanted to make one more attempt to resolve it with Verizon before I make a full blown complaint to the Attorney Generals Office, the Better Business Bureau as well as post this incredibly BAD customer service story on social media. I hope that I hear from someone ASAP as this is critical that I get things resolved immediately. I can be reached at [removed].
Personal information removed as required by Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

Complain to the Attorney General about what? There is nothing in your story worth any such complaint. They will tell you the same.
First you have payment difficulty so credit and the Edge program are not available to you. You have to be credit worthy to get any upgrade, unless you can pay full price for all those new devices.
Can you?
You are trying to get new contract plans, but since you are having paying on time and in full issues you will not get extended credit from any carrier.
What I would do is go and port out to Boost or Virgin Mobile where you pay a reduced cost for each device and get unlimited everything for $40 to $50 a month, it is pre pay so if you don't pay you get cut off.
Verizon although with the best coverage is also the highest priced.
Good Luck

Similar Messages

  • My hard disk crashed and I cannot find out how to "contact customer service" other than this forum.  The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive.  Please help.

    My hard disk crashed and I cannot find out how to "contact customer service" other than this forum.  The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive.  Please help.

    Hi Anthony ,
    Here is the link to connect with Adobe Chat Support.
    https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
    Hope your query gets resolved .
    Regards
    Sukrit Dhingra

  • I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically. Can some one out there help me?

    I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically.

    Update automatically under which circumstances, exactly?

  • I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

    I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues).  And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

    Thanks, I appreciate the help.  I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

  • I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send scree

    I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send screen shots of all of the drive location where the drive is still good and I can see my Adobe Acrobat pro information, but the download itself is missing. NEXT STEP?

    If you are talking about Reader (you did post in the Reader forum), then just download http://get.adobe.com/reader/enterprise. However Reader is free not purchasable. You can download a trial then install using your serial number, which if you didn’t register or write down somewhere you will be out of luck to track down.
    Download a free trial or buy Adobe products | Adobe downloads

  • My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed

    My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed

    The cost is $149 for all the phones except the iphone 4S that one is $199. Apple does not cover any acidental damage

  • Need help with getting images to look smooth (without the bitmap squares) around the edges. When I transfer the image from pictures, it sets itself into the InDesign layout, but with square edges. I need to find out how to get it to look smooth?

    Need to find out how to get my images transferred into an InDesign layout without the rough edges, as with a bit map image, but to appear with smooth edges in the layout. I can notice it more when I enlarge the file (pic). How can I get it to appear smooth in the finished layout. Another thing too that I noticed; it seems to have effected the other photos in the layout. They seem to be
    pixelated too after I import the illustration (hand drawn artwork...)? Any assistance with this issue will be greatly appreciated. Thanks in advance.

    No Clipboard, no copy & paste, as you would not get the full information of the image.
    When you paste you can't get the image info from the Links panel, but you can get resolution and color info either via the Preflight panel or by exporting to PDF and checking the image in Acrobat.
    Here I've pasted a 300ppi image, scaled it, and made a Preflight rule that catches any image under 1200ppi. The panel gives me the effective resolution of the pasted image as 556ppi. There are other workflow reasons not to paste—you loose the ability to easily edit the original and large file sizes—but pasting wouldn't cause a loss in effective resolution or change in color mode.

  • Need to find out how many users are using Siebel Application

    Hello all,
    I need to find out how many users are using Siebel Application?
    Is there a way I can find out?
    Thanks.
    yasun

    Hi,
    Read the following:
    http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor30.html
    http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor17.html
    For full information about server status and statistics red:
    http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor.html
    T.Abed

  • Need to find out how much % of query completed from OEM

    Need to find out how long will a query take to run or when I am running the query where can I check to see that X% of my query is complete.
    Is that % shown on OEM --> Performance --> Top Activitity?

    Under OEM/GC of release 10g you won't be able to see how long the query will take neither how much % of a query are already finished.
    I know that this functionality was given in the old release of the OEM (javas based GUI with ll the databases on the left side). I'm missing
    that old functionality, too...

  • I need to find out how much wifi data my apps are using. I have a very limited amount of wifi data, and I am exceeding my monthly allowance. Apparently, even apps I think are not open are sending/receiving data through the wifi and using up my allowance.

    I need to find out how much wifi data my apps are using. I am on a very limited amount of WiFi data each month, which I am regularly exceeding. I have been told to work out which of my apps is using the data. Also, I think I have closed an app by double clicking the home button, then swiping the app up - is this the way to close it, or will it still be sending/receiving data?

    Go into your Settings : General : and turn off background refresh for your apps.  In Settings : Mail  turn Fetch new data to OFF and Load Remote Images to OFF.  This will mean that Mail will only check for messages when you actually use it, and all your advertising junk mail won't have all the images in it.
    Turn off push notifications every chance you get.
    Make sure you are actually quitting apps:  to quit apps press the Home button twice and you should see a bunch of smaller screen images for every open app.  To quit the app swipe from the screen image (not the icon) upward off the top of the iPad.  You can swipe left and right to see more open apps, but there must be no left-right movement on the screen when you swipe upward to close the app.
    Turn off your internet connection when you do not need it.  The easiest way to do this is to swipe up from the bottom of you screen to get the control centre, and then touch the airplane to turn on airplane mode.  You can repeat this sequence to turn it back on again when you need it.  Most especially turn airplane mode on whenever you are sleeping your iPad for long periods.  This will save battery life too.  OR actually turn your iPad off - which means holding the power key down for several seconds until the red swipe bar appears, and then swipe to turn it off.  If you go this route, note that it will take longer to turn on then it takes to wake from sleep.

  • I need to find out how to transfer all the music from my old IPOD to my new IPOD.  Not all of my music was purchased on ITUNES.

    I need to find out how to transfer all my music from my original IPOD nano to my new IPOD nano.   I want to keep both and not all of my music was purchased on ITUNES.  Please help!

    Your music should be in your iTunes library, that is how it gets synced to the iPod. If that music is not present in the iTunes library, you will need to get a 3rd party software for the computer to get the music off the original iPod and then move it to the iTunes library to be able to sync it to the new iPod. You can see some additional information in this tip supplied by a fellow user. Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • I need to find out HOW I can download Adobe Acrobat 10.

    I have my serial number, where the product is registered to me through Adobe, but I cannot find the software.
    How can I download the product now?
    I need Adobe Acrobat 10
    Thanks!

    I think it must have originally come installed on my Dell computer.  I don't remember actually seeing an install disk.  But I registered it with Adobe, and they show my serial number.  I was just trying to avoid having to buy the program again, because I have changed computers, and the new computer doesn't have Acrobat on it. 
    Thanks for all your help!
    Pat Willener <[email protected]> wrote:
    Pat Willener http://forums.adobe.com/people/pwillener created the discussion
    "Re: I need to find out HOW I can download Adobe Acrobat 10."
    To view the discussion, visit: http://forums.adobe.com/message/5472663#5472663

  • Need to find out how to install QuickTime Pro on a new device using current license.

    I broke the screen on my previous laptop/tablet and had to replace it. I had paid for QuickTime Pro and have an active license. I need to find out how to install QuickTime Pro on a new device using current license. My old device has been destroyed.

    Download and install the free QuickTime Player 7 from Apple and enter your registration info to unlock the Pro features.

  • I need to find out how to have Speakable Items available each time I boot up.

    I use Mavericks Speakable Items every day to open and close applications without using my mouse if function keys.
    The only way I get it to start is to calibrate it AFTER boot up.
    I need to find out how to have it available each time I boot up my Mac Mini with OS 10.9.4,
    Suggestions.

    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

  • I need to find a new email provider.  One that integrates well with my 'mail.'  I will also need to figure out how to notify everyone in my 'address book' of my change. I've been okay with earthlink but it's getting too expensive. Please advise.  Jack

    I need to find a new email provider.  One that integrates well with apple's 'mail.'  I will also need to figure out how to notify everyone in my 'address book' of my change. I've been okay with earthlink but it's getting too expensive. Can anyone help?  Jack

    I use a OLD G3 when I travel and mostly I am connecting over the satellites which is not really the best connection.
    I use GMX which is free and never have a problem getting my emails from anywhere even in the middle of the oceans.
    It does work using Apple mail and the adress book

Maybe you are looking for

  • Can I darken the time on iCal

    The time font on my calendar is relatively light. Is there a way to make the time easier to see?

  • Portal Runtime Error while executing GP tasks from UWL

    Hi all, I am trying to create a process in Guided Procedures. The activities involved in this process include calling some standard R/3 transactions. For this, I first created Portal Iviews of the SAP R/3 transactions involved. Then In GP Design time

  • HT1825 15" PowerMac Studio Display

    Does anyone know the fair market value for a 15" Power Mac G4 studio display?

  • Newbie question about JMS topic and OSB

    So here is what I want to achieve: I want to "front" a JMS topic on WLS using OSB 10g. I want the users (producers and subscribers) to be access the topic via proxy services. The way I picture this is that a producer will invoke a proxy to publish a

  • Phone keeps deleting contacts.

    I have an iPhone 4 (without the latest iOS update), and I keep having issues where while using different apps, my phone just suddenly closes them unprovoked. When I turn the phone off and on to fix that, my contacts disappear. Is there a fix for this