I need to flip a clip in the event library, not timeline. Is that possible?

I have a clip that is upsidedown and want to flip it in the event library and then work on clips. Can I do that? Is all editing available in the event library?
Also, when I flip my upsidedown image in the timeline (not where I wanted to do it), the thumbnails don't flip even after it's done rendering. Is there a fix for this?
Thanks

somanna wrote:
Hello Luis,
Did what you wrote and it is indeed done. BTW, the timeline which appears when we do this procedure, what of it? Will it be a separate 'project' on the timeline or will it go away once such editing is done?
This is the timeline for that specific clip. In FCP X each clip can be opened in its own timeline.
If you again select the same clip in the event libraryand choose "open in timeline" there you'll have it.

Similar Messages

Every time I drag a clip into the events library Final Cut Pro X crashes.

Every time I drag a clip into the events library Final Cut Pro X crashes. The import appears to have occured successfully despite the crash as it is in the folder when I reopen FCPX. But having to restart the program every time I import is annoying and suggests the program is deficient. The only imports I have tried so far are from iMovie, its sister program.

Have you tried dumping the preferences file, always my first item when issues arise in the FC family. Second, have you tried different file types? It could be a file issue, FCX not recognizing it (letting you import, but throwing up afterwards).

How can I see the first frame of a clip in the Event Library

I slate my shots for a reason, but when I am looking in the Event Library I see a random frame a couple of seconds in to the clip instead of the first frame, how can I set it so I can see the first frame?
Thanks in advance

Switch to filmstrip view and zoom in.

I have problem with my iphone 5 when I talk my ear allways tuch the screen and get it on no sound, the screen are not lock, is that possible

I have problem with my Iphone 5, when I talk my ear allways tuch the screen and get it on no sound, the screen are not lock, is ti possible to lock the screen when incomming an outgoing call going on

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

Is it possible to split a clip in the event library?

Can't find an answer, so i suspect not.
I have a long .mov movie which I'm using to learn. I can't find a way to detect scenes or split clips. Any suggestions welcome please

Normally you do this by marking sections of a clip with keywords or as favorites, which makes clip segments.

HT2479 I recently updated the iMovie app and now all my events are missing from the event library, although they seem to be on the external hard drive...how do I restore all the clips (I have begun to edit the clips down) I am a recent PC convert, thanks

I just updated the imovie app and all the clips from the event library are now missing, although they seem to be on the external hard drive...I am a new mac user, so please help...thanks...

I just updated the imovie app and all the clips from the event library are now missing, although they seem to be on the external hard drive...I am a new mac user, so please help...thanks...

No audio for clips in my event library since upgrading to iLife '09

After upgrading to iLife '09, I noticed something odd in the new iMovie. All of my clips (recorded with a Sanyo Xacti HD1A and imported into the previous version of iPhoto DO show up in the event library, but DO NOT play any sound in the event library. If I copy a clip or move it up to the project editor the audio plays there. Does anyone know why I am getting no audio for these clips in the event library or what can be done to correct the issue?
Thanks,
-Mike

Finally got some sound on the clips in my iMovie '09 event library. This is what worked here: I went into the Pictures folder and showed the package contents of the "iPhoto Library". I went into the "Data" folder. I went to a "2008" folder. I located the folder of the first video clip I had for the holiday footage... "Dec 14, 2008". Inside that was a QuickTime file "SANY0001" and a JPEG "SANY0001.jpg". I zipped up the "Dec 14, 2008" folder. I dragged the folder to the trash. I dragged the .zip file out to the desktop.
I opened iPhoto '09. It showed an event for Dec 14, 2008 with a dashed-line round rectangle where it would have normally shown the first frame of the video clip. I closed iPhoto '09 and opened iMovie '09. It alerted me that it needed to generate a thumbnail for some video, and after about a minute the clip was in my event library and playing audio. Not only that... ALL clips in my event library now are playing audio. I quit iMovie '09 and went back into the "iPhoto Library". A new "Dec 14, 2008" folder was there with a new "SANY0001" QuickTime file (I wonder where it got this file from... hidden cache or backup somewhere?). I expanded the .zip on the desktop and dragged the original JPEG file from it to the new "Dec 14, 2008" folder.
I opened iPhoto '09 again. Now the thumbnail (obviously the JPEG file) displays fine.
Double checked iMovie '09... Yep, still playing the audio in ALL the clips in the event library.
I'm not really sure why this worked the way it did. The time it took to generate the new thumbnail was ONLY for the one clip... so it seems rather odd that all the subsequent clips in the event library started to work. Perhaps I just got lucky and it is only that first clip that was throwing everything else off in the thumbnails... or maybe iMovie just looks at the first clip in the event library to determine if it is playing sound or not for all of them?
Another oddity? The original SANY0001 file is "17.2 MB". The new one, which appears to be exactly the same in quality, is "10.8 MB". The "More Info" section reveals a bit more that might be of interest. The original is Codecs: Photo - JPEG, Integer (Big Endian). The new one is Codecs: Photo - JPEG, Integer (Little Endian). Total bit rate in the original is 2,570. In the new one it is 1,605.
Ah well. It works!!! Now I can finally have some fun exploring the new features of iMovie '09

Movie Clips in Event Library not Recognized By Project Library

I downloaded Photos but when working on a project in iMovie 9 my iPhoto videos were not found. However if I revert to using iPhoto I regain my ability to move selected photos into my iMovie project so for now I will simply not use Photos. However I still have a problem. The movie clips in the projects in my Project Library don't find the clips in the Event Library in the iPhoto Videos folder. I see either: "This clip's media file is not currently available" or "Source clip is missing." Is there some way to refresh iMovie? Fortunately the projects shared to iTunes are still intact.

Many who post here use Preference Manager from DIgital Rebellion to trash preferences. It's reliable and the price is right – free.
I assume you've tried different events on different drives and the no-playback problem persists.
And just out of curiosity, can you play clips in a project timeline or if you open the clip in its own time line? And does the skimmer skim?
Russ

How do I change the aspect ratio of source video in the event library?

I’ve imported video to iMovie 08 from a Canon Mini DV MD235 video camera. The video is recorded in widescreen format and plays back in widescreen when viewed from the iMovie event library (prior to doing any video editing). However, when I delete rejected frames from any particular video clip in the event library the video clip is automatically pillarboxed (i.e. switched from widescreen to 4:3 format). This squashes the video horizontally, stretches it vertically and leaves vertical black bars to the left and right of the video during playback. This automatic change in aspect ratio is occurring to the source video in the event library.
I’d be grateful for any help / advice on how I can convert the edited clips back to widescreen aspect ratio, so they display in the *event library* as they did when first imported into iMovie.

I don’t really want to clog up my hard drive with unwanted video and it’s easier to edit it from within iMovie.
Have you considered manually importing only portions of the clips you actually plan to use? Or, if you must import the entire clip, have you considered trimming externally in an application like MPEG Streamclip which will allow you to set frame level in/out points and then perform a "Save As..." operation that stores the select range of frames to an MOV file container retaining the proper flag?
Is there anything I can do from within iMovie to activate the 16:9 setting for these as yet unedited clips, so the same pillarboxing doesn’t happen?
Not sure what you mean by "unedited" here. If the files have been destructively split, the flag is gone and there is nothing you can do about it but re-compress. If you mean they are imported but as of yet whole and still contain their flags, then you have two options. The first is to edit non-destrctively within iMovie '08 and the second would be to do the trimming externally.
This second option is really fairly simple. Just close iMovie '08. Open MPEG Streamclip and load a clip you want to trim. Set your in and pout points, select the "Save As..." option, and store the files in the original Events folder with a new name. I would also recommend you perform these trims in their original time sequence so the "creation" date time groups (Finder attributes) are in time order also. When done with the loaded clip either delete it from the "Event" folder or move it to an archival location. When done with the last clip, close MPEG Streamclip, delete the Cache and Thumbnail folders from the Event folder, open iMovie '08 again, and go get a cup of coffee or tea while the files are re-thumbnailing. DO NOT DO THIS TO ANY EVENT WHICH CONTAINS FILES ALREADY USED IN ANY PROJECT. (I.e., this must be done before you start the actual project editing process.)
It seems odd to me that iMovie is doing this.
I suspect that as the application was originally written as an NLE, non-destructive, "by reference" application, the writers/updaters "overlooked" this facet when adding a "destructive" routine and did not provide for checks of this flag nor provide for copying it re-written segments.

Rotate Multiple Clips in the Event Browser (help)!

I make no apology for posting this a second time - there were no replies to my first post and if you've ever contemplated rotating something like 400 clips by opening them one by one in the Timeline and then adjusting the Rotate parameter in the Inspector, you'll know how I feel.
I want the correction to be on the clips in the Browser, because there's a lot of waste footage and it's so hard to trawl through it upside down. Rotating in the Storyline is dead easy but it doesn't affect the Browser clips - and that's what I need.
I'm sure I read you could do this - and I'm sure I tried it, and it worked - but I can't get it to work again.
I'm convinced the Browser Thumbnails turned the right way up - but I may be hallucinating.
I know it involved opening one clip in the timeline and either adding the 'Flipped' effect or changing the Rotation in the Inspector. I then (somehow) applied that change to the rest of the clips in the Event Browser.
Already tried copying and then Cmd+Alt+V, on all the selected clips in the Browser, but no joy. I also tried adding the rest of the Browser Clips to the same Timeline (which then magically becomes a Storyline) and Copying and Pasting there - but that doesn't affect the Browser Clips.
(Maybe it's my age).
Andy

OK - so here's how I did it in the end . . .
Copy a rotated clip in the timeline.
Right-click a clip in the Browser.
Choose 'Open in Timeline'
Press Cmd+2 to select the timeline.
Press ' i ' to select the clip in the timeline.
Press Alt+Cmd+v to Paste the Effects.
I got a stiff neck doing it - SURELY there's a proper way to do it?
Andy

IMovie '11: how to move edited clips back into the event library?

I made a green screen video that is supposed to be the foreground, and edited out the ums and ahs. Now I need to add a green screen background, which apparently I cannot do after already inserting the green screen foreground footage. (I would LOVE to be able to do that, but apparently you cannot.) I have tried to drag the edited videos back into the event library, but they bounce back out, and I have checked all of the menus twice and there is no command to export to event library. Help! I need to insert a background and don't have another hour to re-edit from scratch.

Hi
No - there are no easy and straight forward way to do this - BUT
You must do as one does in iMoivie when there is a need to combine several functions.
Export out (the manipulated clip) as a full quality QuickTime movie (just this part)
Then import this as a new Event
Put this into a new project (if several effects is to be applied) or into Main movie if You only need to apply one more thing as a GreenScreen.
For several effects - one might need to Export/Import several times. Much easier in FinalCut Pro.
Yours Bengt W

Is there a way to copy referenced video clips into the iMovie library?

When I import video clips into an iMovie event it seems that iMovie uses only a reference to the file. When files are moved things get horrible broken soon. I noticed that iMovie does actually copy video clips into your library when you convert your library from iMovie'11 to iMovie'13. Is there a way to copy video clips into the iMovie library when importing them so that they don't get lost?

http://support.apple.com/kb/PH14747

Is there a way to split clips in the Event browser? (audio-synch related)

It seems there is no way to split an event-clip (a clip that appears in the Event browser). You can split Events--but only if they consist of more than one clip. And then you can only split them between two clips. People who have transferred analog video tapes (e.g., Video8) to their computers with the help of iMovie end up with Events that are the same length as their video tapes. So this usually means 2-hour events (consisting of one clip). But iMovie has a synchronization problem for such DV files. This problem would be mitigated by having shorter events. Hence the desire to split events. I thought a read somewhere a workaround for splitting event-clips, but if was a few months ago. I wouldn't think there is any reason we cannot split event clips, other than a preference for non-destructive editing. But a bit of destruction may be worthwhile if it improves synchronization. Does anyone know a way to split clips in the Event browser?

you haven't updated to FCPX10.1 haven't you
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver15f852e7

An event in one of my libraries no longer has the event icon next to it's name just the name only. I can't view the clips in the event or import new clips. I've tried deleting the event and nothing.

an event in one of my libraries no longer has the event icon next to it's name in the browser just the name only. I can't view the clips in the event or import new clips. I've tried deleting the event and nothing. After control clicking the event it shows all the media that has been previously imported. But it does not allow anything to be done to the event including deleting. This showed up at the beginning of a normal import session. This is fortunately the back-up evant.

Did you perhaps mess with the contents of the library in the Finder?
You may try the solution suggested in this thread:
https://discussions.apple.com/message/24915790#24915790

After transferring clips to Final Cut, they do not show up in the events library. They show up in the timeline of my project, though. how can I see then in the events browser?

After importing clips to Final Cut, they do not show up in the events library. Events from 2014 show up, but not 2015.They show up in the timeline of my project, though. How can I see them in the events browser?

TThose aren't bins. Those are just groupings based on when the content was created or any other selected parameter. Use the action popup in the toolbar tho change the setting.

I need to flip a clip in the event library, not timeline. Is that possible?

Similar Messages

Maybe you are looking for