I need to install the HP drivers on a laptop with a broken screen in order to get VGA port to work.

OS: Windows 7 Home Premium SP1
Hewlett Packard Model: 2000 2a20ca Notebook
Oh my god please give me some insight here, it is so hard to find the right answers and I refuse to lose to this technical box that's driving me nuts! So here's the run down:
My screen broke on laptop...fine. It was connected via HDMI to TV and working fine. Until one day it decided to not turn on. I think due to Windows updates and hubby had no patience so kept restarting
I tried to reload Windows on it, not thinking about the drivers, and I'm pretty sure I managed to reload Windows. Now I need the drivers to install chipset, networking etc. (which I have a disc for)
The problem is I cannot see the screen in order to click "install", I can't see the BIOS or the boot sequence. Ugh! And even if I could, the drivers are not installed to use the CD ROM or VGA port.
I can HEAR Windows start up and turn on! Doo-DO-Doo-DO lol the darn thing is working!
The monitor works in my other laptop.
Would/Should the VGA monitor work if I could get it to start in safe mode?
I've heard of a program that can streamline the driver's into a Windows installation disc so everything is installed altogether but how can I reinstall Windows if the drivers aren't loaded for the CD ROM?
Is there a way to get the necessary drivers installed? or is this notebook now garbage?

RocknRoll77 wrote:
Seriously?
1. The model number is the first thing at the top aside from the OS.
2. In my explanation it states: "I have the drivers on a disk"
Thanks for all your help!
Getting the drivers is not the problem. Getting the drivers installed on a laptop with a broken screen...is the problem.
Ok, well sometimes you can't use external monitor to see what is happening in some laptops and the only real way to fix this is to fix the broken screen so you can reformat and resinstall the system again. Those are you only options at this point in time.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Similar Messages

I need help updating the graphic drivers for my laptop.

Recently purchasd a new game and I am having some issues with the graphics. Every post I have read suggests it is an issue between HP and amd. I keep trying and seem to be going backwards. I would love to actually talk to someone from hp but they haven their number very well. I have tried every combination between hp and amd and I am obviously missing something. I dont have much hair left to pull out.

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and you had mentioned that you are looking for help Updating the Graphics Drivers on your HP Pavilion dv7t-6c00 CTO Notebook PC. I have the actual drivers page for your specific HP Pavilion dv7t-6c00 CTO. It has the AMD Graphic Driver on this page. You could also update the drivers a couple other ways. 1. Using the HP Support Assistant2. Going into the Device Manager, Right click on the AMD Graphic and doing an update. You had also mentioned that you wanted to actually talk to someone from HP. Please use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear.
They will be happy to assist you immediately. Let me know how everything goes. Have a great day!

Installing the jdbc drivers

Hello Guys:
I am new to Oracle Application DBA stuff and here is what I have to do now.
I need to install the jdbc drivers in our oracle financials UAT.
Here is what I heard from our Oracle support:
ANSWER
======
The Patch #4159795 status is Deleted, indicates that the patch has been deleted from the patch repository. This usually occurs when the patch has been obsoleted.
However, this bug (BUG:4159795) has been fixed in version 10.2 which means it's solved in the latest releases.
The JDBC drivers are certified to work with the currently supported versions of the Oracle Database. For example, the JDBC Thin drivers in Oracle Database 10g a re certified to work with the 9.2.x, 9.0.1.x, and 8.1.7 Oracle Database releases.
However, they are not certified to work with older, unsupported database releases, such as 8.0.x and 7.x.
http://download.oracle.com/docs/cd/B19306_01/java.102/b14355/getsta.htm#i1008205
Now please tell me what needs to be done. Should i install this on the application server or on the database server. If any one could give me a heads or give me pointers to documents it will be great.
Regards,
Bala

If you are using Oracle 11i, the JDBC drivers are normally upgraded via a patch during a JDK upgrade (1.3.1, or 1.4.2, or 1.5.0). I am pretty sure the note referenced by the analyst has no relevance to Oracle EBS.
Upgrading JDBC drivers with Oracle Applications 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=164317.1
Upgrading Oracle Applications 11i to use JDK 1.3
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=130091.1
Upgrading to J2SE 1.4.2 with Oracle Applications 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=246105.1
Using J2SE Version 5.0 with Oracle E-Business Suite 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=304099.1

Do I need to install the drivers on my old Mac Pro disc or from my Snow Leopard disc?

Hi,
I've got a 2008 Mac Pro (dual quad @ 3GHz) w/ 24GB RAM and I've got Windows 7 Ultimate 64-bit installed. What do I need to install?
On my newer 2009 iMac (which included Mac OS X 10.6) I just inserted that disc specific to the iMac and installed the drivers, but the disc for my Mac Pro is old (10.5.2) do I need to install the drivers on it or not? Can I just insert my Snow Leopard 10.6 disc to install Boot Camp etc., or won't that include drivers for the Mac Pro? The Mac Pro is running Snow Leopard 10.6.8.
Thanks.

Thanks for your reply,
I have both the silver discs specific to my iMac and Mac Pro models that you receive with your Mac, and a general copy of Snow Leopard that you buy from the store.
I used the silver disc that is specific for my iMac to install the drivers, and Boot Camp 3.0 on my iMac. But with the Mac Pro, the software is older and only has Boot Camp 2.0, thus I'm wondering if I can simply use the software on the general copy of Snow Leopard I own, or does the silver disc contain specific drivers for my Mac Pro that I need?
I'm under perhaps the wrong impression that the silver discs that you get with your Mac purchase contain drivers for your specific Mac model which you can't get from the general Snow Leopard disc.
Thanks.

I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows. I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC or not?

I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows. I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC and finalizing the Windows 7 installation (for the 1st time) or not?
I am worried that may lose my information... Appreciate any feedback! Note: already half-way in the process of installing!

Yes, IF you picked the right partition, as in the Boot Camp partition. If everything is done right you should be able to boot into the Mac side.
If you already booted into Windows and are at the point of installing the Boot Camp Drivers your already done installing Windows! Yea! All you need to do is just install the drivers and everything should work normal.
The Windows partition and the Mac partition are seen as two different HD's now as far as the computer knows.
You can use the Boot Camp control panel in Windows to boot into the Mac side and the Startup Disk in System Preferences on the Mac to switch to Windows. If you can't then press and hold down the Option key untill you get the boot screen.

I have just purchased the latest macbook pro 13 retina (late 2013). I want to connect to a Dell U2713H Monitor. As the new macbook doesn't have a cd slot, I am unable to install the monitor drivers etc. Where can I download the drivers?

I have just purchased the latest macbook pro 13 retina (late 2013). I want to connect to a Dell U2713H Monitor. As the new macbook doesn't have a cd slot, I am unable to install the monitor drivers etc. Where can I download the drivers?

Thanks for your prompt reply. I'm not sure how to connect to the monitor as the only ports available on this model mac are Thunderbolt. The mini display to display cable supplied doesn't seem to work out of the TB port. Do I need to use a Thunderbolt cable + an adaptor?

How do you install the JMicron drivers for IDE compatibility on a p965 Platinum?

I can plainly see I've got the same issue as many others with regard to using my IDE devices on the p965 board. In short, I can't. I have to install the JMicron drivers.
I know this has been covered elsewhere, but frankly I can't find it and I want it to be in a highly visible place, perhaps a permanent thread. Would someone please supply the link(s) relevent to doing this for those of us who cannot yet boot to an OS because ALL of our mass media and optical devices are on the IDE chain that needs the drivers?
Thanks in advance!

Quote from: GettinThere on 06-December-06, 08:44:41
I can plainly see I've got the same issue as many others with regard to using my IDE devices on the p965 board. In short, I can't. I have to install the JMicron drivers.
I know this has been covered elsewhere, but frankly I can't find it and I want it to be in a highly visible place, perhaps a permanent thread. Would someone please supply the link(s) relevent to doing this for those of us who cannot yet boot to an OS because ALL of our mass media and optical devices are on the IDE chain that needs the drivers?
Thanks in advance!
never see any solution that work all time for this problem.
for some of us: driver install:
http://www.station-drivers.com/page/jmicron.htm
for some other: flash bios with bios 1.2
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=745&kind=1
the better one: buy sata device and diseable this Jmicron in bios

How can I convert MiniDV tapes to DVD? I've use a Canon GL 2 and an iMac about 1 year old. I'm trying to use iMovie and I've installed the latest drivers.

How can I convert MiniDV tapes to DVD? I've use a Canon GL 2 and an iMac about 1 year old. I'm trying to use iMovie and I've installed the latest drivers.

MiniDV was a great format, one I still use often. I also still use iMovie HD6 to process it and, for all the iterations of iMovie that followed it, I still believe it was one of Apple's greatest movie software programmes, next to Final Cut Pro, using a timeline method of editing. That was also in the day which Apple put Superdrives into their computers, so that you could not only make your movie in iMovie, but you could render it to iDVD and then burn the DVD. Now you need to buy an external burner.
Since iMovie HD6 and iDVD 6 were "universal" software, it has continued to work through the many OS releases since it came out with Tiger, I believe it was. So, it may still work with Mavericks too and, if you could locate a copy of iLife 06, probably used, you might enjoy the difference that HD6 has over all iMovie releases since then.
Not saying you can't process your MiniDV with current iMovie versions, but I'm not the one to speak about that.

To open "CS5ServiceManager" you need to install the legacy Java SE 6 runtime.

Recently updated to OSX Yosemite. Now every time I turn the computer on I get this message.
To open "CS5ServiceManager" you need to install the legacy Java SE 6 runtime.
I don't know what CS5ServiceManager is. And when I click on the "More Info" button, I am redirected to a blank screen. So I'm confused and a little worried. Is it necessary to install Java SE 6 runtime? If so, I think I can find the instructions on how to do it, but I'd like to know if (1) it is safe to do so and (2) if it's necessary.

Here it is: Apple Java 2014-001. Quite safe to install. Only necessary if you are using Adobe's CS5 suite.

When I try and open adobe illustrator I get a pop up message saying "To open "Adobe Illustrator CS6" you need to install the legacy Java SE 6 runtime."

When I try and open adobe illustrator I get a pop up message saying "To open “Adobe Illustrator CS6” you need to install the legacy Java SE 6 runtime." it also says "Click “More Info…” to visit the legacy Java SE 6 download website." When i click more info it transfers me to an apple page which never loads, its just a blank page. I downloaded Java SE 6 like it says it needs but it did nothing. All of my other Adobe programs such as bridge, dreamweaver, lightroom, Photoshop, indesign, and flash all work except for illustrator. What can I do to fix this?

Go to Apple and look for the Java for OSX 2014-001 link. Download from there and install it.

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
Clinton

Unable to access the internet on windows xp using bootcamp. I installed the bootcamp drivers ( from snow leopard) but it still doesn't work. I have parallels 6 also installed and IT works fine. I am missing a rtl network adapter-thanksr

Hi
I have a new 21 inch imac oct 2011 version. I installed bootcamp and windows xp on my machine and i also installed parallels 6.
Paralleles works great and i can open any program with it. But bootcamp also works EXCEPT it refuses to give me access to the internet. I installed the bootcamp drivers from my snow leopard disk, it did not make a difference. All the drivers installed but still no internet. I then installed the bootcamp drivers from the gray mac osx disk (#1) but it stopped installing with an error number ( 2753) and it said that the package was damaged.
I have tried everything; i opened each disk and trieed installing the files separately. Nothing.
What i see missing in my devices screen in XP is the network adapter.
I have a router (dlink-dr615) and it is connected by ethernet to my imac. I wonder if THIS might have anything to do with the problem. Any guidance would be much appreciated.
Thank you

I'd recommend reposting in the Boot Camp forum, that is where the Boot Camp and Windows gurus hang out.
Good luck.

Using bootcamp 5.1, Windows 7 home is installed but missed installing the drivers disk. How to install the Mac drivers for windows after the fact.

While using Bootcamp 5.1, and OS X 10.8.2, I partitioned my Mac disk with 80 Gigs for Windows 7 home and the install went great, but I must have missed the time when I was to install the Mac drivers disk to install the drivers for Windows,(when in Windows I don't have a mouse or optical drive.) Is there a way to install the drivers after Windows is installed, or do I have to go through the whole process all over again?

Press X key after the startup sound to boot into OS X. Then, open Boot Camp Assistant, download Boot Camp drivers and burn them into a USB drive or DVD. Finally, boot in Windows and install drivers

I currently use photoshop elements 10 on my laptop. My laptop has crashed and i need to install the exsisting software on my new laptop. please help?

I currently use photoshop elements 10 on my laptop and my laptop crashed. I need to install the existing software on my new laptop. please help!

Yes you can directly use the upgrade version.
You can visit this page Photoshop Elements (PSE) knowledge base. for further assistance.
Regards
Kishan

I have tiger 10.4.11. In order for my computer to recognize my new Iphone I need to install the new iTunes, however the new iTunes will not download on my computer because it is not 10.5 or higher. Is there a way that I can upgrade to leopard? Help!!

I have tiger 10.4.11. In order for my computer to recognize my new Iphone I need to install the new iTunes, however the new iTunes will not download on my computer because it is not 10.5 or higher. Is there a way that I can upgrade from tiger to leopard? Help!!

Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

I need to install the HP drivers on a laptop with a broken screen in order to get VGA port to work.

Similar Messages

Maybe you are looking for