I need to install windows on my new Macbook pro for running my flight simulator software

Hi!
I'm new to the Mac world and I need to install windows on my new Macbook pro for running my flight simulator software which only runs on windows. I would like to purchase and download the windows 8.1 rather than buying the CD.
When i go to the microsoft store and click windows 8.1 it says it is only for who has windows xp or vista...
can you tell me where and how can i purchase the full installation 8.1 for download?
i will keep the ISO file on my flash drive.
Thanks!
<Re-Titled By Host>

it's likely an upgrade you are looking for and not a full install of windows
http://www.techrepublic.com/blog/windows-and-office/get-the-iso-you-need-to-crea te-your-own-windows-81-dvd/
if you get it as an iso file then you need to burn the iso file to a optical disc to install it

Similar Messages

Can't install windows 8 on new macbook pro retina display.

I spent my afternoon trying to install Windows 8 Pro on my new Macbook Pro with retina display. I get fairly deep into the installation process using bootcamp when I get a windows message that says something to the effect that windows can't be installed because the hard drive is not formatted in NTSF format. And that is the end of the line.

Welcome to Apple Support Communities
It's normal. Boot Camp Assistant formats the Boot Camp volume in FAT32 because in the past it supported Windows XP and it could use FAT32. This changed with Windows Vista.
The only thing you have to do is to choose the BOOTCAMP partition in this step, and select "Drive options (advanced)". Then, press "Format" and it will be formatted into NTFS, so press Next and the installation will start.
See the Apple's guide > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

Issues with installing windows on a new macbook pro retina.

Hello,
First time using bootcamp on my new macbook and I am running into an issue.
I have read the troubleshooting guide and everything else and no matter what I do I get the same problem.
The issue is that when bootcamp restarts after partitioning my drive, windows loads and I start the install process. Its says set up is starting and then it says that a required cd/dvd drive device driver is missing. I only have one usb drive connected (the one with windows on it) and nothing else. This is getting incredibly frustrating haha.
info on the macbook.
brand new (purchased yesterday) macbook pro 15 retina. 512ssd gtx 650. 12 gb of ram
I really need windows on my pc before monday so all help is appreciated.

External USB DVDs use to be an issue that req'd editing plist to allow booting from one.
I have lost track of the issues and fixes but for burning ISO:
SimplyBurns is a Mac OS X application with a GUI, which allows the user to burn CD / DVD media.
Features:
Emphasis on ease of use
Audio CD project, Data project (Filesystems: ISO9660, Joliet, HFS+, UDF) and Burn image mode
Erasing rewritable media
Persistence
http://simplyburns.en.softonic.com/mac
Here's instructions on burning an ISO with Disk Utility:
http://lifehacker.com/251758/mac-tip--how-to-burn-an-iso-or-dmg-file-to-disc
And this thread on burning a Windows DVD in OSX:
https://discussions.apple.com/thread/2039118?start=0&tstart=0
(Summary: you can use Disk Utility to burn the ISO, but choose a slow burn speed)
Windows 7 USB/DVD Download Tool Windows can be used with any VM
The Windows 7 USB/DVD Download tool allows you to create a copy of your Windows 7 ISO file on a USB flash drive or a DVD. To create a bootable DVD or USB flash drive, download the ISO file and then run the Windows 7 USB/DVD Download tool. Once this is done, you can install Windows 7 directly from the USB flash drive or DVD.
http://wudt.codeplex.com/
Install Windows 7 From USB Drive
Before you begin, you will require the following:
USB Flash Drive (4GB minimum)
Windows 7 ISO Image file
UNetbootin
Note: If UNetbootin doesn’t work, try out the Microsoft’s official tool called Windows 7 USB/DVD Tool.
Note that resulting USB drives from UNetbootin are bootable only on PCs (not on Macs).
http://unetbootin.sourceforge.net/
http://www.addictivetips.com/windows-tips/install-windows-7-from-usb-drive-requi res-2-simple-steps/

Help -- cannot install Windows on my new Macbook Pro

I have a new 2010 Macbook Pro with an Intel SSD inside, and where the DVD drive is I have a 500 GB hard drive with the MCE Optibay, which I used with no issues for 1 1/2 years in my last laptop. I have everything set up nicely however I find I am unable to boot any Windows disk when I go to install boot camp. I set up the 2nd partition, then go to do the installation using an external DVD drive that I've used before with no issues. The disc is sesned and everything seems like it will work but instead of booting the Windows installer disc I get a "No" Mark (like Ghostbusters without the ghost) and it stops booting. I've tried Vista (two different discs) and 7 and nothing will boot.
Can anyone tell me how I can go about installing Windows on my 2nd disc. The disc itself is fine. Boot Camp sees it and says which disc would I like to make a Windows partition on, and all seems fine -- but the OS just won't boot off the Windows disc no matter what. Have tried 2 different external USB drives and it's frustrating.
Hope someone can help!

The problem you are experiencing probably isn't unique to your particular MBP. It took me two months to get Win7 (32 bit) installed and working on my MBP (early 2010 15.6" screen). I gave up on trying to get the 64 bit version to work. As far as I am concerned getting Win 7 to play on a Mac Book Pro is a crap shoot. You really have to be lucky, good has nothing to do with it. Maybe in another 6 months things will have progressed to the point that the installation is actually a no brainer. Sorry I can't be more supportive of your efforts.
I don't have a clue as to why the 32 bit version installed (not without problems I might add), and I could never get the 64 bit version to play. I used the retail version of Win 7 Ultimate which came with both 32 and 64 bit DVD's.

Please help, need to install photoshop cs6 on new macbook pro

I just purchased a macbok pro and would like to install photoshop cs6 on it which i purchased last year for my imac but can't figure out how to do it without a cd drive. I really don't want to have to purchase it again since we are allowed to install it on 2 computers.

http://forums.adobe.com/message/4791545

Installing WIndows 7 on my Macbook Pro

I really don't want to do this but I need to install Windows 7 onto my MacBook Pro to run a specific application. I installed fusion, now what?

Hi Mike,
The first thing I'd do is run all Mac updates, so you're up to 10.6.7, then repair permissions. After you know things are running stable, back up, then install Windows.

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

Installation Guide
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
Apple Boot Camp Support
Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
You need Apple drivers. And you then need to add on your own audio driver.
You can run Assistant at any time to download and save a set of drivers.

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

HT1222 I have a new MacBook Pro and running Windows 7 on that side with Parallels. My Windows side keeps locking up. Help

I have a new MacBook Pro and running Windows 7 on that side with Parallels. My Windows side keeps locking up. Help

You should be able to get the CS3 programs installed and running on the new pc since CS3 is spec-ed for Windows 7 Service Pack 1. Downloading the programs does not require a serial number. You can find them here: Download CS3 products but you will need the serial number to activate the programs. You might be able to find that thru your Adobe account online.
You will not be able to install the CS5 Mac version on a PC and you won't be able to trade it to a PC version either due to it being an older version. Trades are allowed only for the latest version (CS6)

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
-I have a flashdrive with win7 on it.
-I mounted the ISO of win7 with toast for bootcamp to do its thing.

Good luck.
Consider this a bump so that hopefully someone with better news spots your thread.
Allan

How can i install windows games in my macbook pro

I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.

try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
I try many time, but after restart bootcamp partition, apple show blinking folder error
I think this firmware not support to install windows by usb
NOTE:
I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC ?

I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
But- are you trying to reboot with both the USB install and the DVD install both plugged in? that would definitely cause confusion.
Do this, reboot with NOTHING plugged in. Once you hear the Mac chime, immediately press and hold option.
You should only see the Mac HD, and Recovery Partition.
THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows. If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing. I had to do it this way on my mid 09 MBP.
Let me know if this works to start the install. If not we may have to start over with Bootcamp Assistant

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

HT3986 I have installed windows 7 into my macbook pro 15 inch with lions. This computer is the current 2.2 GH i7 chip with 500 GB HD. Now, how do I install the drivers. When I started boot camp, the system prompted me to create a CD. What do I do with

I have installed Windows 7 into my Macbook Pro 15 inch with Lions as operating system. (current model with 2.2 GHz i7 processor, 500 GB HD ad 5400 rpm). When I started with boot camp, the system promped me to create a disc, which I presume is for the drivers for windows 7. Now windows is intalled. What do I do with the CD that the system created for me? Also, why does the system automatically start in Win7 instead of Lion. I need to pression the option key to have it start in OS X. I thought it was supposed to be the opposite.

Insert it while you are in Windows, if it does not autostart run setup.exe.
Choose your startup disk using Apple>System Preferences>Startup Disk (in OSX) or Control Panel>Boot Camp>Startup Disk (in Windows)

I need to install windows on my new Macbook pro for running my flight simulator software

Similar Messages

Maybe you are looking for