I need to know how to create a dual boot so that I can have Windows 7 and the Mac OS

I need this so that I can have Microsoft Access, because it's not available for Mac..
And, I have so many computer games that I have for Windows that I want to play on my Mac.
Help please!

You do not open it yet.
First you need to read this: http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_Late2010.pdf
This will tell you when the Windows image is required.
Prepare for this on all fronts first ... backup/clone, and read the ENTIRE document.
Then ask about what to do with the Windows ISO. 
At least in my humble opinion.  This can go badly quickly if you miss a step.

Similar Messages

  • So I had photshop cs5 installed on my pc...i had to get my hard drive replaced! I have the serial number and everything, but I need to know how to download it. I really don't wanna have to pay for the program over again.

    So I had photshop cs5 installed on my pc...i had to get my hard drive replaced! I have the serial number and everything, but I need to know how to download it. I really don't wanna have to pay for the program over again.

    If you registered your product, you should be able to find the download and serial number from your Adobe account.
    https://www.adobe.com/account.html
    Otherwise:
    Download Adobe CS5.5 Trials: Direct Links (no Assistant or Manager) | ProDesignTools
    You might still have to contact Customer Support to reset your Activations, unless you managed to deactivate the original installation.

  • Need to know how to get serial number to ipod that i only have receipt on

    Need to know how to get serial number to ipod that i only have a receipt on

    How to find the serial number of your Apple hardware product

  • I need to know how to create a pdf document larger than 129 inches from MS Project 2007

    I am completely new to Adobe Acrobat Pro 9. I need to know how to create a PDF which is larger than 129 inches for use on a plotter from MS Project 2007. I have searched the Adobe support articles with no success. Any help would be appreciated.  Thank you.

    Thank you.  I have tried that but it will only let me go to 129 X 129 inches, no larger.
    Sincerely,
    Bill Stern
    NSD IT Support
    22289 Exploration Drive
    Suite 305
    Lexington Park, MD 20653
    Phone: 301.862.4577 ext 10
    Fax: 301.862.9828
    Email: [email protected]

  • Hi, I have Adobe Acrobat Professional.  I need to know how to create multi-links on 300 page docs

    I need to know how to create multi-links on a 300 page document, showing "return to main Menu".  Ideally placed on the bottom right of each page. I have adobe acrobat Professional. 

    Import a picture to be a button, place it, activate HYPERLINK tool, draw a rectangle around the whole button, in the window popping up select the link behaviour, submit with OK.
    Then copy & paste the button object to every page. I don't know whether pasting it on every of the 300 pages can be automated, but if not, it is still done quite fastly.

  • I use Microsoft XP on my PC, where r my pictures from my iPad? I need to know how to send pictures to Walgreens, etc so I can get them printed. Help please!

    I use Microsoft XP on my PC, where r my pictures from my iPad? I need to know how to send pictures to Walgreens, etc so I can get them printed. Help please!

    I am legally blonde and not very tech savvy, so I don't really know how to do that.  I know ur time is valuable, so could u possibly give me a short tutorial?  I would b very grateful! I use the camera kit to get my pics from my sd card to my iPad and also from my iPhone to my iPad. Had I known I would have this problem, I would not have transferred my pics to my iPad until after I took the sd card and had my pics printed.

  • I have just purchased a new iPad from apple and I don't know how to use it. is there somewhere that I can learn the basics

    I have just purchased a new iPad from apple and I don't know how to use it. is there somewhere that I can learn the basics

    Out of a silly curiosity, in what way did Ralph's reply solve your problem? (not that Ralph doesn't deserve recognition, mind you.)

  • How do I change system settings so that users are not required to enter the mac's admin pw in order to join a wifi network?

    how do I change system settings so that users are not required to enter the mac's admin pw in order to join a wifi network?
    Right now my macbook pro requires an admin password before connecting to a new wifi network. In other words when a user that is not an admin tries to connect to a new wifi network the pop up displays indicating that it is locked and an admin password is required.
    Is there a way to remove this restriction so that a non admin can connect to wifi without the mac's admin password.

    You can enable / disable this option in System Preferences:
    System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab > Require administrator authorization to: Change networks

  • How do I delete an audiobook so that I can have to space to download another book?

    How do I delete an audiobook so that I can have the space to download another book?

    Here is my current code, the draggable objects aren't set on the timeline, they just live on the stage
       function init(){
       // apply the draggable JQuery UI plugin to the Symbols on the stage
       sym.$('TIF_sym').draggable({
       start: function(e){},
       drag: function(e,ui){}
       sym.$('DXF_sym').draggable({
       start: function(e){},
       drag: function(e,ui){}
       sym.$('DWG_sym').draggable({
       start: function(e){},
       drag: function(e,ui){}
       sym.$('SHP_sym').draggable({
       start: function(e){},
       drag: function(e,ui){}
       sym.$('DEM_sym').draggable({
       start: function(e){},
       drag: function(e,ui){}
       // apply the droppable JQuery UI plugin to the Symbols on the stage
       sym.$("DataLayerObject").droppable({
       drop: function(e, ui) {
                 // Hide Target Element Grey Box.
                 sym.$("FirstDrag").hide();
                 sym.$("Text").hide();
                 // Hide file box
                 var hideEle = "#" + ui.draggable.context.id;
                           console.log(ui);
                           $(hideEle).hide();
                 //Play timeline for each data layer when correct file is dragged onto object
                 sym.getComposition().getStage().getSymbol("DataLayerObject").getSymbol($(ui.draggabl e).attr("id").substring(6) + "_layer").play();

  • I just got my first Apple product (ipod touch) and am needing to know how to transfer music from another itunes list. Can music that is currently on another ipod and/or computer be transferred to my new touch and my new itunes account? Thank you!

      
    Recently purchased my first Apple product (ipod touch) and am needing to know how to transfer music from other ipods and other itunes accounts. Can this be done? I have plugged in another ipod into my new itunes account and it will not let me transfer the music that it contains into my new account. Any/all help is much appreciated. Thank you!

    I have no music in my itunes account yet. I am trying to transfer music from friends' accounts and their ipods/playlists.

  • I need to know how to use Captivate 4 agregator to package a lesson in 5.5 and an articulate quiz

    I need to package a lesson created in Captivate 5.5 and a Quiz created in Articulate Quizmaker using the Agregator funtion in Captivate 4. I want to end up with a file that I can upload to an LMS, so learners can take the lesson and quiz together.

    The aggregator will only accept SWF files, and only SWF files that are all created with the same version of Captivate. You should always use the Aggregator that comes with the same version of Cp that was used to create the SWFs.
    Given that you mention "packaging" is it possible you are confusing the Aggregator with the Multi-SCORM Packaging tool?

  • Need to know how to do a face lift on my site, can anyone help?

    I'm brand new to Flash/Adobe/Dreamweaver so I'm reaching out for some help from you guys. I'm an IT admin for an insurance company and they have also made me the webmaster and have been given the task of doing a little face lift on our site. The site is www.altuonline.com if you want to view it first. First, I've downloaded trial versions of Dreamweaver SC4 and have purchased WB 2005 for ASP.net applications. Our site contains some flash and asp.net applications. I have .aspx, .fla/swf files and all will be getting edited. First I thought about making the page load alot faster and expending the borders of the site all the way out almost to the frames of IE, this would be a good first step. If you have time please post some ideas of where I would start off so I can complete this within timely fashion...maybe under 3 months....

    cajun900RR wrote:
    First I thought about making the page load alot faster and expending the borders of the site all the way out almost to the frames of IE, this would be a good first step.
    Content-wise, loading faster will likely be easier to accomplish if you use Flash only sparingly rather than depending on it to deliver all of your site's content. And avoid use of large images. This will also make it easier to maintain in the future (and it addresses the issues brought up earlier in a simpler manner).
    But what do you mean by "expending the borders of the site all the way out almost to the frames of IE"? I do hope you are thinking in terms of the browser's viewport. If so, look into flexible or liquid layouts. Just don't make the common beginner's mistake of thinking about monitor sizes and resolutions. Those are not relevant to Web pages. Also, design your pages with W3C compliance in mind before worrying about how various browser differences - you are going to test in various browsers, right?
    If you have time please post some ideas of where I would start off so I can complete this within timely fashion...maybe under 3 months
    For quick layout solutions, you might want to consider some of Project VII's solutions. Quick, customizable, compliant, and great support. Don't let that be an excuse not to learn HTML/CSS, though
    And lurk in here for lots of good advice and helpful links even when you don't have a specific question in mind.
    Mark A. Boyd
    Keep-On-Learnin' :-)

  • I have a new imac with imovie 11 however my hd everio camcorder will only work with imovie 8 or 9 how do i download imovie 9? all i can find are updates and my mac says i don't need it

    i have a new imac with imovie 11 however my everio hd camcorder will only work with imovie 8 or 9. i tried to download imovie 9 but my mac says i don't need the update. How can i download imovie 8 or 9 complete not the update?

    I really appreciate all your help. Today I spent some time on the problem. First I purchased  any video converter from the ap store and then I connected the camera to the mac with the original usb cable that came with the camera. I turned on the camera and selected backup on pc and the logo came up on my home page. I opened it and after several attempts i found the 3 video files that were on the camera. I then converted them from a tod file to mp4 and then transfered  them to imovie. Now I have to figure out how to send the video to youtube or move it to an external hard drive which I have not been able to do. So far I am not too fond of imovie 11. If you could send me  the download for imovie 6 I then could try that route. When talking to apple support yesterday about the problem they suggested to get Final Cut Express. It's 200 bucks so before i order the install disc i would like to try your suggestion. My email address is [email protected] Again I thank you very much for your help! George

  • I need to create a PowerPoint on my iPad so that I can then show it on the mac's at college but I can't find it as an app. Help please.

    Help please I need to find an PowerPoint app as I've got to create one ready to present my artwork on the Mac's at college in the next coming weeks. Thanks
    Ps I've got the latest iPad retina display

    There are several apps in the App Store. Look at them to see what might meet your needs. There is a keynote app that might be best for you.

  • How to create a dual boot on OSX Mavericks?

    I've Mavericks and I want to install two more OS X (10.7 and 10.8) on the same machine. Is there any way to install earlier OS X along with the latest OSX ?
    I've created partitions and tried to install there but a message says something like this "This OS X could not be installed on this MAC". Then I tried to create a bootable usb drive by "DiskMaker X" but that was also failed.
        Any help would be appreciated.

    Hi!
    Create a new partition for Windows XP and install it. This is no problem.
    After this you must restore the Windows Vista boot loader. You can do this with EasyBCD. Install it and start the program.
    Go to the "Add/Remove Entries" tab. You'll see that there's only one option available in the Vista bootloader at the moment. In the "Add an Entry" section, change the Drive in the dropdown menu from C:\ to E:\. Change Type to "Windows NT/2k/XP/2k3", and the Name to "Microsoft Windows XP". Then click "Add Entry" and "Save".
    Then go to the "Manage Bootloader" tab. Make sure that "Reinstall the Vista Bootloader" is selected and then click "Write MBR".
    Now you can restart the notebook and you should have a full working dual boot system.
    Bye

Maybe you are looking for