I need to reclaim Project from FCP X Trial

Hi
Last year I downloaded the FCPX Trial. I now need to access the project I created in there. But when I try to open the application it tells me that its expired and I need to purchase so I cant even see if its in there. I am happy to purchase it but how can I be guaranteed its there? I saw on the FAQ page that you can access libraries previously created when you download the paying price version. Is this also 100% the case for projects?
Many thanks! Need it urgently! Thank you!

THanks Jim
yes I have started the process of downloading maverick after reading some threads. However it's now been frozen for half an hour after getting through 3.32 GB. I've read some threads and it seems a lot of people have had this problem with it freezing. Some people said to wait it out as eventually it downloads... Do you know how to tackle this problem? Many thanks in advance

Similar Messages

  • I need to output a PAL HDV project from FCP as a PAL DV file with 4 audio t

    I need to output a PAL HDV project from FCP as a PAL DV file with 4 audio tracks - specifically one stereo pair to be t1&t3, the other stereo pair to be t2&t4. This is the standard way requested by an international distributor of tv programmes. I understand how to set the sequence in FCP to output 4 audio tracks - either 2 stereo pairs (1&2, + 3&4), or 4 discrete tracks. But how do I then output this as a QT file?
    The manual tells me that to export multiple audio tracks, File>Export>QT Movie has it's Config pop-up menu in the Audio Settings area of the General tab of the Sequence Settings. Well, that's set for 4 discrete channels, but the QT export settings only allow for 2 mono or 1 stereo output, and that's what I get when I try it. What it says in the manual just doesn't happen.
    Exporting via Compressor, on the other hand, has an abundance of choices of 4-track outputs, none of which are labelled as anything resembling 'discrete'. Would any of those 4.0 settings suffice? Or am I likely to get myself into difficulties further down the line? As I am monitoring for this task on a 2-track audio system, I cannot confirm exactly what I am getting when I use any of those settings.
    Any advice would be greatly appreciated!
    John

    Call me naive, but I've not heard of splitting the stereo pairs like this before.
    What broadcaster? (perhaps one of our EU regulars will drop in...)
    You can do all sorts of pairing but it is coincident tracks pairing- eg 1/2 + 3/4
    Sorry I can't offer anything.
    x

  • How do i take a project from FCP to DVD so it plays on a DVD Player

    Help, i need to export a project from FCP in a format which will play on through a UK DVD player and TV. What format do i export to ?
    I then understand i need to import this into DVD Studio Pro set it up to Loop and then burn to DVD R, is this correct ?
    Help please
    Hillster

    Export QT/Current Settings/Self Contained/Audio and Video.
    Drop it into Compressor and choose the DVD preset that matches the total number of minutes of video and also use dolby2 audio.
    Import into DVD SP.
    Delete the menu in the graphic view. Set the track to first play and loop or end jump to itself.
    Drop the video and audio assets into that track.

  • Import project from FCP 6 to FCP 10

    I can probably answer this myself, but is there any way to open project from FCP 6 in FCP 10? Can't export as an XML because I no longer have FCP 6.

    YYou will need to find someone with your version or FCP7.

  • Need help coping project from one computer to another.

    I need help coping project from one computer to another.  I loaded all video on computer 1, copied events and project folder to computer 2.  I was told I only needed to copy the project folder back to computer 1 since the events folder is already there.   I copied project folder back to computer 1 but the files wont open.  I dont have computer 2 available. 
    Please help!!!

    Hi
    No that's not the way to do it - iMovie gets confused and in some cases the problems might be un-repairable.
    You've got several problems
    • iMovie'08 - CAN NOT MOVE PROJCTS - You NEED iMovie'09 or iMovie'11 - I see no other working solution
    • Never MOVE or alter any folder named
    iMovie Projects - or -
    iMovie Events
    on DeskTop/Finder - This might be very harmful
    • Moving (Projects) and Events - HAS TO be done within the iMovie Application.
    You've got an Evets window and here You can view Your Events in two ways - Yearly - or - Yearly per Hard disk
    Here You can move within this "window" to another location
    • Projects - NO they do not contain Your full movie - only a document on howto use the material in Event folder
    and there might be worse if You added Photos from iPhoto and Audio from iTunes/Garageband - then You have
    to get this over to the second Mac too, to be able to continue editing.
    So to move Your projects to another Mac You need
    • iMovie'09 or 11
    • an external hard disk -
    MUST BE Mac OS Extended formatted - as UNIX/DOS/FAT32/Mac OS Exchange will not work for VIDEO
    Should be a FireWire one - as UBS/UBS2 performs badly when used for video
    • Then move/copy over within Project resp Events window in iMovie Application
    Hopefully I've been not to confusing or badly structured to be followed.
    Yours Bengt W

  • Need to exclude project from summarization.

    Hi All
    I have a query on Project summarization.
    I need to exclude project from project summarization as soon as its status gets TECHO or CLOSED.
    If we canu2019t do it on status then just any one help me out how to exclude it from hierarchy.
    Regards
    Gaurav Verma

    Create a summarisation hierarchy using a seperate status selection profile which excludes the TECO
    and CLSD projects.
    Create status selection profile and use it in KKR0 for projects.
    Regards
    Sreenivas

  • What's the best way to send a project from fcp to my .mac video gallery ?

    Hi
    i have a small 14 minutes project i would like to post on .mac in my gallery.
    iMovie can do it easily but thats to many steps from fcp to imovie and to .mac
    is there a more direct way of transferring movies ( projects ) ?

    You don't send projects from FCP to .mac.
    Export the movie using a reasonable compression for internet playback.
    Open up your .mac iDisk folder and drag the exported file to your movies folder on the iDisk
    Open up .mac, create a web page and link your movie. I suppose iWeb does this as well but have never used the program.
    If you want more help, try the .mac forum.
    Good luck,
    x

  • Sending multitrack Project from FCP to STP on another computer doesn't work

    Hello,
    I attempted to search the forums but can't find my specific problem mentioned. I apologize if I overlooked it!
    I am attempting to send a Soundtrack Pro Multitrack Project from Final Cut Pro 6.01 to Soundtrack Pro 2.01 on another computer. When I do, the video comes through fine but the audio fails to transfer over.
    Here's what I did:
    First I open the Final Cut Project, highlight all the clips in the sequence to send and click "Send to Soundtrack Pro MultiTrack Project". I select all options including the "Fully Rendered Video" Option. This project opens up great in Sound Track Pro on the original computer. In Soundtrack Pro I "save as" and make sure I select "Collect Audio Files", "Collect unused audio files", & "Collect Video File". As far as I have read, this should be all I need to make sure all of the audio and video clips transfer together with the STP file.
    However, when I place this folder (including the media files) on a external hard drive and transfer it on to our other computer (set up for audio recording and editing) and open it up in STP I get no audio. The clips visually transfer and all the clip lengths match up with the video, however there is no waveform showing. A straight line at 0db is all that shows up. I check the clips in the bin and they show the same file size as on the first computer. When I select an audio clip and take a look at the actions tab it shows the name of the clip and under it it says "insert silence" (which was not there on the original computer). When I de-select the insert silence the audio still does not play (the straight line on the waveform disappears). I try deleting the "insert silence" action and the same thing happens.
    I have tried doing this operation mulitple ways with the same result. Am I doing something wrong? The only thing I can think of is the file starts out on OSX 10.4.11 and is transfered over to leopard 10.5. I just tried doing the reverse operation (creating the file from the audio computer and sending it to the video computer) and everything works fine. No idea what this means. I need this to work the other way around so I can begin the extremely intensive audio work on this film while our editor continues the video edits so thank you very much for any help that you can lend me. It is greatly appreciated.
    -Matt

    Could be a difference in OS's causing the problem, but I can't say for sure. You could try using the OMF export option instead. I almost guarantee it will work.

  • Need to author DVD from FCP X

    I converted to FCP X and need to author DVDs from the footage I shot.  Since I still have DVD Studio Pro I imported the footage, authored the DVD and burned it. It won't play on my DVD player, Blu Ray player or even my Mac. In the build I get notes that say:
    Note: The directory ‘/Users/melbraneff/Library/Caches/DVD Studio Pro Files/DSPPublishing’ is not a DVD-Video directory and will not be included in the final disc or DLT.
    Note: The directory ‘/Users/melbraneff/Library/Caches/DVD Studio Pro Files/PAR’ is not a DVD-Video directory and will not be included in the final disc or DLT.
    Note: The file ‘TB_Index_Bg_HDNTSC.mov_NTSC_10000.m2v’ found in the ‘DVD Studio Pro Files’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    Note: The file ‘DVD_01_VS_EAST_BEARS.layout’ found in the ‘HVDVD_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    Note: The file ‘VOB_DATA.LAY’ found in the ‘HVDVD_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    I don't know if that is telling me what the problem is or not. Any help would be appreciated.

    FYI, DVD is always SD, irrespective of whether the authoring program is DVD Studio Pro, or something else. The only HD that DVD SP ever supported was the long-obsolete HD DVD.  Nor has Apple ever integrated Blu Ray devices into their hardware.
    There is a lower quality version of Blu Ray that is available in FCP and which can be burned to a normal DVD-R disk. You start with a Bllu Ray setting and select a DVD drive for the Output Device. The limitations are that it's half the bit rate and you're limited to about 30 minutes. But it is HD resolution. Give a try if you're interested.
    Russ

  • Question about moving a project from FCP to Premiere to do color correcting/sound finalizing.

    My friend and i have been editing a film on FCP express. I've been learning more about editing and color correcting recently and have been teaching myself on  Adobe Premiere. I offered to color correct the film on Premiere on my system. I'm curious what the best way to do this would be. is it possible to take the timeline from FCB with the raw data and somehow open that in CS? Or should he export the pre corrected final cut without correcting as a certain type of file, then I work on that, then export that as the final cut?

    If FCP express has XML export, then you can export the project and then import the XML into Premiere Pro.  It will give you the basics of the timeline and basic transforms for each clip (position, scale, rotation).  However, not everything comes across - titles and 3rd party effects will not come across.
    Given that, another option is to render out the entire movie and then grade it in Premiere Pro.  But you lose a lot of control if you go that way.
    The third option is to import into Premiere Pro and rebuild the bits you might be missing from FCP and then you have both the control and options.
    Hope this helps,
    Dennis

  • Exporting multiple projects from FCP timeline hangs

    When rendering multiple projects from Final Cut Pro's timeline through compressor, I get varied results. I am rendering 3 files - Apple Pro Res, MPEG-2 (VBR Highest quality for Blu-Ray), & 48khz AIFF audio file.
    Typically we will set up 3 projects for one night to render overnight (30 minutes to 1 hour for each project). In the morning when we come in compressor will sometimes show up as 90 hours remaining, sometimes it will still be cranking out on the last project with 12 hours remaining. If we leave it going it will eventually finish. However when we shut everything down, reboot computer, start export from timeline and it completes the render in HALF the time compressor stated remaining before we closed it. Each project typically takes 6-8 hours to get all three files (pro res, MPEG-2, AIFF) we allow 18 hours for render.
    Drive space should not be an issue. We have a 5 TB array (typically has 2 TB free for 4 projects), system drive has 350 GB free and the 4 projects rendered out will take up approximately 300 GB. The project reads, and writes to the array for everything.
    Any help on trying to figure out why compressor slows down over time. Once restarting compressor goes as expected.
    Thanks for the help in advance.
    Don
    All software is up to date latest versions of FCP and Compressor.

    This is like an EDL...Edit Decision List.  This basically is a metadata rich document that is used to transfer clip information between systems.  You can export an XML from FCP 7 to FCP 6 so that you can open a sequence, or a project.  Export an XML of the sequence and open that up in Excel to have clip name, reel and timecode information for tracking footage. 
    No media is enclosed in this file.

  • Need Help Import Project from Adobe Premiere CS6 TO FCPX

    Does anyone have step by step instructions on how to export a project from Adobe Premiere CS6 to FCPX.
    Many Thanks,
    Mat

    I am trying to transfer a movie project I made on my work computer (MacBook Pro, iMovie '08) to my home computer (iMovie HD, iBook). I've transferred the files using a Lacie, but when I open iMovie HD on my personal computer, it does not let me open the project I desire.
    As you have already found, iMovie '08 projects, as such, are not backwards compatible with previous versions of iMovie. iMovie '08's project basically consists of a list of instructions detailing how a project is to be exported while previous versions of iMovie actually rendered physical file segments ordered properly in a physical timeline reference file.
    I can import, but not the whole file, it keeps putting items in the trash. I have exported Mobile, Medium, and Large files.
    Basically you have two options. You can either import your raw footage (the Event clips) and "re-create" a project in iMovie HD or export your iMovie '08 project, complete with edits to an HD compatible format (e.g., DV or AIC/AIFF) and import this file into iMovie HD. Unfortunately, this latter approach will not allow you to "manipulate" your previous edits.
    Basically, I want to be able to open the file in iMovie, in case I wanted to duplicate it or edit it.
    As indicated above, you can import iMovie '08 shared/exported files to iMovie HD but you then have to edit them as source files. To remove a previous edit, you would literally have to delete it from your new project in order to add another.
    I also want to be able to continue burning copies of this movie slideshow to DVD (I created a DVD project using iDVD).
    Previously authored and burned DVDs can be copy-burned by applications like Toast or used to create stored "image" files that can be used to burn new DVDs on an as needed basis in the Mac OS "Burn" folder or using the Disk Utility application. In fact the "image" file can also be created for this purpose from within iDVD.

  • Need to reclaim space from dwh tables.

    We have couple of large tables (> 200G) in one of the DWH schema. I need to reclaim space on the mountpoint.
    I have used ALTER TABLE <> MOVE COMPRESS; command to compress these tables.
    Now in dba_segments it is showing the improvement. 200g table came down to 60G. However I am not able to see any change in datafile and in mountpoint, I beleive due to the HWM.
    I tried shrink for the tables, it did not help.
    Could you please suggest any other approach.

    refer to
    http://jonathanlewis.wordpress.com/2010/01/30/free-space/
    http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/
    Anand

  • Need to transfer project from i movie to DVD, what would be best dvd app to go with iMovie

    need to transfer imovie project to dvd...whats the best compatible app for imovie???

    There is no acceptable substitute for iDVD.
    Apple believes that the entire world has access to fast broadband and wants to distribute home movies to friends and relatives via download (iCloud) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. That worked for some, but is now said to have been withdrawn by Apple. Also, you can complain bitterly here, perhaps suggesting that Apple could have provided a choice between using iCloud and burning DVDs:
    http://www.apple.com/feedback/
    Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that comes with OS 10.7 Lion (which also omitted iWeb) or will come with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD.
    However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast.
    And if you think Microsoft are any better, their new Windows 8 operating system will not play DVDs, or burn them, unless customers buy an extra upgrade, the company has announced.
    In other words, computer manufacturers have declared optical media as dead, long before consumers are ready to stop using them, which is fine as long as they offered us a choice, but they won’t even do that.

  • IMovie HD/08: Need help merging projects from both versions.

    I have some video that was imported using iMovie HD6 (saved to my internal hard drive with some editing already done) and some using iMovie 08. (Save to an external hard drive and unedited). I realized later that iMovie 08 lacks features available on iMovie HD6. I would like to move all video to my external hard drive and merge my projects. I would then like to edit the whole thing on iMovie HD6. I've noticed that I can simply drag my iMovie 08 project directly into iMovie HD6 and directly into my other project. However, it wants to save it to my internal hard drive. (No where near enough space on my internal drive for that). Is it safe to assume that if I were to move my iMovie HD6 project onto my external drive that it would then attempt to import/merge my iMovie 08 project keeping it on my external drive? Also, do I run a risk of losing any editing already done to my iMovie HD6 project if I move it to my external drive? If not, is there a right or wrong way to move it? Also, my external drive is connected to my computer via USB. Am I going to have any problems editing from my external drive because of that?

    I am trying to transfer a movie project I made on my work computer (MacBook Pro, iMovie '08) to my home computer (iMovie HD, iBook). I've transferred the files using a Lacie, but when I open iMovie HD on my personal computer, it does not let me open the project I desire.
    As you have already found, iMovie '08 projects, as such, are not backwards compatible with previous versions of iMovie. iMovie '08's project basically consists of a list of instructions detailing how a project is to be exported while previous versions of iMovie actually rendered physical file segments ordered properly in a physical timeline reference file.
    I can import, but not the whole file, it keeps putting items in the trash. I have exported Mobile, Medium, and Large files.
    Basically you have two options. You can either import your raw footage (the Event clips) and "re-create" a project in iMovie HD or export your iMovie '08 project, complete with edits to an HD compatible format (e.g., DV or AIC/AIFF) and import this file into iMovie HD. Unfortunately, this latter approach will not allow you to "manipulate" your previous edits.
    Basically, I want to be able to open the file in iMovie, in case I wanted to duplicate it or edit it.
    As indicated above, you can import iMovie '08 shared/exported files to iMovie HD but you then have to edit them as source files. To remove a previous edit, you would literally have to delete it from your new project in order to add another.
    I also want to be able to continue burning copies of this movie slideshow to DVD (I created a DVD project using iDVD).
    Previously authored and burned DVDs can be copy-burned by applications like Toast or used to create stored "image" files that can be used to burn new DVDs on an as needed basis in the Mac OS "Burn" folder or using the Disk Utility application. In fact the "image" file can also be created for this purpose from within iDVD.

Maybe you are looking for

  • Web Enabling SAP R/3 Transactions in the Portal

    Hi, Our requirement is to web enable SAP R/3 (>4.6) transactions in the portal (EP 6.0). We don't want to check for user authorization in the portal as all these things are done in the R/3 system. We just want to have an iView in the portal which wil

  • Moved files, now illustrator won't open

    Got a new and improved error message: Process:         Adobe Illustrator [333] Path:            /Applications/Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator Identifier:      com.adobe.illustrator Version:         18.

  • WebCache in clustered env gives Blank Page with Http error code 508

    Hi All, I have Oracle webcache in a clustered mode ,which is acting as a loadbalancer for the Oracle Application Server. The Oracle Application Server is hosting custom j2ee application . Scenario 1: Only one Node of WebCache is Up If i try to access

  • Adding No. of Datafiles to TableSpace

    Hi All, I have doubt regarding adding no. of datafiles to Tablespace. I wanna connect my application to Oracle10g database. As a DBA I am going to allocate on separate Tablespace to this new Application. As time will pass the data acumulated by the a

  • After 10.9.2 upgrade no firewire 800 connection

    After upgrading (iMac 24 2007) to 10.9.2 Mavericks the connection to all of my firewire drives got lost.