I need to run I need to run snow leopard and lion on same computer?er
I have a Mac Pro and a extra internal hard drive that I would like to put lion on the extra one and run snow leopard on my original one and be able to boot from either one. How does one go about doing this or is it possible?
OPTION key will continue to work. Can alspo be used to select an external clone (CarbonCopyClone, $40 download) backup to boot in case of HD failure. AND OPION key can be used to select the "Recovery Partition" of Lion in case you need it (Command-R also accesses the RecoveryPartition).
A welath of OPTIONs ... really.
Similar Messages
-
How do I make a back up system disk. I wish to run snow leopard and Lion on 1 drive.
I wish to run Snow Leopard and Lion on 1 Hard Drive. I need to back up snow leopard and then install Lion. Any suggestions on how to do this?
Too follow up on this topic - I have recently upgraded to 10.8.2. I have a complete backup HD with SL inclluding some SL-only programs on it. What I want is to make a small size, just SL and my few programs, hard drive with which I can boot when needed. Is it possible to trash all the many programs I have on the SL drive and just keep certain ones? How?
Thanks you for any advice,
John -
I'm running Adobe 9 pro on snow leopard and when I save or print from word for mac 14 the bottom gets cuts off. Can someone help?
Ah! You're creating a PDF out of Word through Acrobat. The cutoff is most likely being affected by the printer chosen.
When you call up the print dialogue in Word, check to see what printer is being used. If it's a typical inkjet printer, Acrobat is using the print margins of that printer as the cutoff area. Since most such printers can't print to the last inch and half or so of the paper, that's where it would be cut off.
Near the bottom, under the preview of the document, click on the Page Setup button. It doesn't really matter which printer you select here. Under Paper Size, choose Manage Custom Sizes. Under the Non-Printable Area heading, choose the same printer and set the paper size you're using.
Note that the unprintable margins for that printer will be filled in automatically. That's what's being cut off. Click the + button to create a modified version. The default will be "Untitled". Give it a new name if you want. Then set all of the margins to zero. Click OK. Now you'll have that as a choice under Paper Size. Doesn't matter that the actual printer can't use this setting since you're going to a PDF. Click OK to get back to the main Word print dialogue.
Now choose Save as Adobe PDF. It should give you an exact duplicate of what's on screen in Word since as far as Acrobat is concerned, your "printer" has no unprintable margins. -
I have two partitions on my internal hard drive - one is running Mac OS X 10.6 Snow Leopard and the other is running Mac OS X 10.7 Lion. Mail (5.0) is set up and runs perfectly on the Lion partition and I have not used Mail (4.5) yet on my Snow Leopard partition. I want to know if I can read, download, and save mail into the same user Library folder (probably the Lion user library) from both partitions...
You usually set up your mail accounts on a specific e-mail client programs such as Mail in OS X and Mail on an iPad, which will access the same remote mail server to have your messages show up on each device. Mailboxes can be synced in this way between two devices.
An alternative is to use the same remote application such as Gmail to access that service from multiple devices, so a dedicated e-mail client like Mail is not needed, but the availability of these depends on the e-mail service being used. -
My software is obsolete (and now dead) in 10.7 so I need to keep Snow leopard alive to run that- but now things like TurboTax are dropping support for 10.6 or lower and I have to have lion or Mountain Lion available. I actually downloaded Lion onto a thumb drive but never installed it when I found out that it would immedaitely render all my FreeHand files inaccessible (years of work!), Now that I am forced to have an OS above 10.6 I was hoping I could install whichever--Lion or Mountain Lion onto an external hard drive and figure out how to boot from that (found something in archives I think, but I need words of one syllable or less). This way I could, ideally, boot from either the External hard drive in the higher OS when needed, or from the internal hard drive when I need to use Snow leopard. There is a long story here, but I think this is the gist. I wasn not sure if this should be asked here or in either Lion or Mountain Lion (both of which I have, essentially, ignored since I would not be moving up until I could figure out how to access those old files of forms and drawings00but now I have no choice. I am panicking now that I HAVE to make the move anbd cannot afford to buy another Mac just to keep two separately running. Any help would be greatly appreciated. i asked Apple when Lion came out and they said there was no way to partition (even if I KNEW how to do that) the haaard drive and install both on my iMac-- but I "think" this is a bit different and possible??? Thanks (once/if I figure this out, I need to figure out how to back-up but that is another matter)
You need to move to Windows 7, because Apple is now releasing a new OS X version annually and it's playing havoc with people's hardware and software.
Windows 7 will get support until 2020, that's 8 years of software stability, however you do need to make System Restore disks, boot disk and another on a hard drive to self restore (like TimeMachine is for OS X)
Apple has no plans to change their currrent behavior as all they care about is selling new hardware with a shiny new OS X verison on it.
If you wait to move, what will happen is you'll lose that full 8 years and will have to swtich to a newer Windows sooner
Windows 7 machines are still widely avaialble, despite Windows 8 (a failure) being pushed currently.
Running three OS X operating systems on one machine is quite a chore reserved for only seasoned computer geeks, then it's only going to last X months as the next OS X version will be released, then the next a year after that.
Another method would be to get a virtual machine software (virtualbox is free) and install Windows 7 into that to ease your transitition if you cant' spring for a Windows 7 machine, preferablly a tower that will last a long time.
Here is a method to run Snow Leopard in Parallels, however it's a unapproced hack and not for the comptuer newbie.
http://forums.macrumors.com/showthread.php?t=1365439
We have no control over Apple's OS X release cycle, nor the third party developers who make their own decisions what to support.
Our only choice as users to stop using both products and seek software/hardware stability. -
Getting a new CD from publisher is not an option as they would want me to pay for a new one and they are pricey. If possible I would prefer to keep my upgrade to lion but would go back to leopard if there's no other option.
You can add another partition on which you can install Snow Leopard. If you do, however, you cannot use Boot Camp Assistant to install Windows. Just so you know.
To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Boot from your Snow Leopard DVD and install on the volume you just created. Be sure you set the new partition as the target for your Snow Leopard system. -
Mail has gone crazy. Header's and messages are mixed up. New Mac Book Pro. Migrated files from Time machine running snow leopard. Reinstall or new computer needed?
Ok; I'm not sure what you're doing. 36 hours is rather long. Seems like a new migration. Not what I intended.
Here's what I intended: from the newly-migrated and apparently-corrupt environment, create a new user, not related to any existing user, nor any migration-created user, or any other user for that matter. That is, use > System Preferences > Users and Groups, authenticate yourself by clicking on the padlock, and then click the + and create a wholly new user. Then log in under that user and establish the mail access.
36 hours? I'm wondering if there's an error or an exceedingly slow network here? Or a really, really slow disk? Or a sick backup? (WiFi isn't the path I'd usually choose, either.)
Failing the attempted second migration, I'd try a different tactic. Does your existing (old) system work? If so, I'd bypass the backup and connect an external (scratch) USB disk drive to the (old) sstem and then boot and use Disk Utility booted from the installer DVD disk or boot and use Disk Utility from the recovery partition or booted from a recovery partition created on some other external storage (details here vary by the OS X version and what hardware you have), and perform a full-disk backup of your original internal disk to (scratch) external storage. (Make sure you get the source and target disks chosen correctly here; copying the wrong way — from the scratch disk to your existing disk — will clobber your data!) In esssence, this will clone your existing boot disk. Then dismount the (formerly-scratch) external disk, transfer it over to the new system, and use it as the source of the migration, by performing a fresh OS X installation on the new system.
Target Disk Mode is also sometimes an option for accessing the disk for a migration, but that requires the right cable, and requires systems that have the same external connection; newer MacBook Pro systems use Thunderbolt for this, and older systems tend to use FireWire. And I'm guessing you don't have compatible hardware.
The details here can and do vary by your OS X versions and your particular Mac systems — if you'll identify the specific models and hardware, somebody might be able to better tailor the above (fairly generic) sequence to your particular configuration. -
I have been making back ups on a Seagate Back up plus drive on a macbook pro running on Mountain lion. Sadly the mac was stolen and all I had was the seagate back up. I tried opening it on my old iMac running on snow leopard and after several visits to this forum managed to open it. The data was safe and sound. Now I have received a hand me down macbook pro which runs on osx 10.9.5. I'm assuming there is a compatability issue as the drive does not come on at all when I hook it up to the usb port. I checked the seagate drive once again on the imac and its light came on on that system. Then I suspected there may be a problem with this macbook pro usb port. But it seemed to work fine when i hooked my camera cord into it. Is it that I must reinstall mavericks. In which case how do I back up before reformatting or reinstalling. BTW I did the command+ R thingy and repaired my internal Hard disc which was showing errors. What do I do next, your help is most appreciated if you have had a similar problem.
Your 2010 MBP would be able to handle Yosemite, but I would strongly suggest that you get the current problem sorted out before trying to upgrade to Yosemite. I'd also recommend another backup that isn't created by Time Machine if you are thinking of upgrading. SuperDuper and CarbonCopyCloner can make bootable clones of hard drives. If you clone your existing system to a fresh external drive, you would be able to boot from that drive and recover quickly in the event that your Yosemite upgrade didn't work out. Time Machine backups are not 100% reliable.
It's possible that, if your internal HD is the one that shipped with your MBP in 2010, it may be failing. If it keeps needing repairs, that is probably a sign that it is approaching the end of its useful life.
Have you run Disk Utility's Repair tool on the external drive as well?
I mentioned the hub because some people have reported here that attaching their USB 3 drives through a USB 2 hub solved some disconnection problems. A good-quality powered USB 2 hub won't cost much.
My most recent brush with random disconnections involved a nice new OWC drive enclosure. I used the cable that came with the drive, but the drive kept disconnecting. Using a different cable solved the problem. You wouldn't expect that what appeared to be a high quality cable would be a problem straight out of the box, but it was. -
I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems. Is it possible to go back in time with Time Machine and reinstall Snow Leopard? Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?
Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system. -
How to I run Snow Leopard, Mountain Lion and Windows 8 on my new iMac
I just bought a new iMac. My goal is to set up 3 different partions to run 3 different operating systems (Mountain Lion, Snow Leopard, and Windows 8). The reason for this post is because when I attempted to do this same thing on my old iMac ( except I was running Lion instead of Mountain Lion) I was able to create a partion that would run Snow Leopard (so I could run Final Cut Pro 6.0.6 on a more stable platform), however I totally "hosed" my old Bootcamp partition running Windows XP. The iMac won't even bootup in Bootcamp anymore. It is just a black screen and it says something about it not being a bootable drive and to insert a bootable disc.
So I need to know the best way to do this, and I want to avoid having the same problems with my new iMac that I had on my old one, especially since I have a freelance job starting next week and my client is sending me licences for software that I will need to run on Windows 8.
Thank you in advanceUse the Boot Camp Assistant to install Windows 8 and a product such as VirtualBox, VMware Fusion, or Parallels Desktop to run Snow Leopard Server in emulation. That iMac model isn't capable of being booted into Snow Leopard.
(82996) -
I had to erase my HD, I have Snow Leopard and Mountain Lion was added for an upgrade after that, now when I try to download the OS X, my HD looks like it going to take it, then it goes no where. And now what is showing up is OS X Maverick for a download, which I didn't even know it existed until I had to down load. I am wondering will I have redownload Snow Leopard or Mountain lion before the OS X Maverick will download.
thank youWell, you can do an erase and install via the Recovery HD:
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
I recently updated? to Lion from 10.6.8(snow leopard), and things seem to be running slower. Has anyone had similar problems? I have Feb 2011 Macbook pro 13" 2.3 Ghz.
As Shootist pointed out, the system uses more power.
However, initially it will reindex the hard drive for spotlight, which will slow things down temporarily.
It also must rebuild caches that eventually will speed things up.
If it has completed indexing the hard drive (no dot pulsing in the spyglass), then there might be something wrong.
Start by booting into the Recovery HD (a partition created with Lion that has Disk Utility and reinstallation options) by holding down cmd-r when you restart. You can let go when the gray screen appears.
When it boots, select Disk Utility and Repair the drive.
If that doesn't speed things up, try re-installing the OS from the same Recovery HD. It won't delete any of your files, but it has helped some people whose Macs ran slow after installing Lion.
Also, how much memory do you have? Lion needs RAM so maxing your Mac out might also help. -
We need to upgrade from Leopard to Snow Leopard and then on up the chain. How?
We have an old MacBook running Leopard (10.5.8). Can we upgrade to Snow Leopard and then add others gradually untill we get to the newest version? If so, were can we find a copy of Snow Leopard?
Before embarking on a major OS upgrade, it would be wise, advisable and very prudent if you backup your current system to an external connected and Mac formatted Flash drive OR externally connected USB, Thunderbolt or FireWire 800, Mac formatted hard drive. Then, use either OS X Time Machine app to backup your entire system to the external drive OR purchase, install and use a data cloning app, like CarbonCopyCloner or SuperDuper, to make an exact and bootable copy (clone) of your entire Mac's internal hard drive. This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy way/procedure to return your Mac to its former working state.
Then, determine if your Mac meets ALL minimum system install requirements.
To install Yosemite, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mavericks, Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory (I strongly advise, at least, 4 GBs of RAM or more)
8 GB or more of available space
Next,
If you run any older Mac software from the earlier PowerPC Macs, then none of this software will work with the newer OS X versions (10.7 and onward). OS X Snow Leopard had a magical and invisible PowerPC emulation application, called Rosetta, that worked seamlessly in the background that still allowed older PowerPC coded software to still operate in a Intel CPU Mac.
The use of Rosetta ended with OS X Snow Leopard as the Rosetta application was licensed to Apple, from a software company called Transitive, which got bought out, I believe, by IBM and Appe could no longer secure their rights to continue to use Rosetta in later versions of OS X.
So, you would need to check to see if you have software on your Mac that maybe older than, say, 2006 or older.
Also, check for app compatibilty here.
http://roaringapps.com/
If you have any commercial antivirus installed and/or hard drive cleaning apps installed on your Mac, like MacKeeper, CleanMyMac, TuneUpMyMac, MacCleanse, etc. now would be a good time to completely uninstall this apps by doing a Google search to learn how to properly uninstall these types of apps.
These types of apps will only cause your Mac issues later after the install of the new OS X version and you will have to completely uninstall these types of apps later.
Once you have determined all of this, you should be able to find the latest version of OS X Yosemite by clicking on the Mac App Store icon in the OS X Dock and then login to the Mac App Store using your Apple ID and password.
You can then begin the download and installation process of installing OS X 10.10 Yosemite from the Mac App Store.
Good Luck! -
My early (white plastic) 2006 imac freezes. I'm running Snow Leopard and have formatted and reinstalled the software 3 or 4 times. Model Name: iMac
Model Identifier: iMac4,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Until I installed the SMC FanControl application my screen would "break up" into strange patterns and then would eventually freeze. Please help.If you are trying to upgrade using a gray-faced OS X disk from another system, that won't work, as those disks are locked to the system types they are delivered with. You'll need to drop the $29 on a retail copy of Snow Leopard, which is available from the Apple online store. Note Snow Leopard requires 1GB minimum, and you may want at least 2GB for better performance.
-
I need to change from mac os 10.5.8 to snow leopard and then to mountain lion
do i have to buy and install snow leopard before mountain lion? helllllpppppp
Yes, you need to purchase Snow Leopard, from the Apple online store - http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard - and the, from the Mac App Store, purchase Mountain Lion.
Make sure that your MacBook Pro is compatible with Mountain Lion -
MacBook Pro (Mid/Late 2007 or newer)
- and be aware that if you have any remaining PPC-only apps on your machine that they will not run under Mountain Lion - see http://roaringapps.com/.
Good luck,
Clinton
Maybe you are looking for
-
Selection in IP for flat file Load
Hi Experts , I Want to know can I have selections available for an IP which is created for Flat file as data source. your early response is highly appreciated. Regards Patil
-
Non priviledged commands fail after patch cluster install
For several years, to allow users to access system functions for higher clock resolutions in their applications, we have made the following mods to two files (per Sun recommendations): In the /etc/system file, add lines: * 10 ms clock resolution* set
-
SelectMany checkbox value-binded with HashMap String,ArrayList
Hello, Someone can help me please? Im trying to create a page with a lot of HtmlSelectManyCheckbox, and i need to value-bind then to the same Object in my BackingBean. First i attemped to bind all HtmlSelectManyCheckbox with a single ArrayList, but o
-
Every now and then while in iTunes I will notice that some of my songs have an assigned album rating, because I will see the regular song rating and it will have the weird "clear" stars, instead of the regular filled ones. This is really annoying and
-
V7: How to create new authlessanonymous users
in v7, I can no longer go into the desktop settings and setup the authless user (as stated in the v6.x documentation), so how can I do this? Obviously is can be done from the new samples installed by default. I've tried going into the new Org, creati