I need to tell Print services to use the 2nd ethernet port

I need to tell Print services to use the 2nd ethernet port
Thanks in advance to anyone who can shed some light. My research has led me to a dead-end so far. Running 10.3.9 on my server. XServe Dual 2.3
I want to have File services and the various other duties pushed through one ethernet port, and print services on the other. I know there is probably a config file to make one simple edit, but I can not find it, or perhaps a "defaults" type command.
Also, where is this "command-line administration guide" that I keep running across on Apple's support?
Thanks in advance.
Matt

Similar issue here too. Is it the subnet? Basically, I'm having a problem printing to an AirportExpress-served printer. Our network looks like this:
(From Outside...>>>...to Inside)
(Public IP) DSL Modem
...(10.0.0.x) Airport Express -- HP DesignJet 100 USB -- Airtunes/stereo
...(10.0.0.x) NetGear Wireless Router
...(10.0.0.x nic 0) Mac OS X Server (192.168.0.x nic1)
......(192.168.0.x) Mac OS X client
......(192.168.0.x) Mac OS X client
......(192.168.0.x) Mac OS X client
The printer driver does not appear to be able to do IP printing, it assumes a direct USB connection. We can setup the OS X Server with the printer served by the Airport Express, as it is found via Bonjour, and then we share its queue via Server Admin. The problem is that the LAN clients cannot print to this server queue. The printer gets stopped at the server.
If we turn OFF the OS X Server's firewall, printing works from both the clients and obviously from the Server. I think my question is this: what ports or services need to be turned on in order for the clients to print? There is no clear checkbox for "Bonjour Printer Sharing", and I'm curious what ports this would open, and if it would be safe. I thought it would work because we're pushing the print job up through the firewall, but apparently some response needs to come back through the firewall, and that's what's not happening.
And to tack onto this, how could we also push iTunes to the Airport Express from the Clients? Assuming the music goes over different ports than the print jobs. ?
Thanks in advance for any help.

Similar Messages

How do you make use of the 2nd Ethernet port on the Mac Pro?

My Mac Pro's ethernet port connects it to the local network and the internet.
Under what circumstances would I make use of the 2nd port?
Are there any settings I'd have to set up in system preferences to make sure one is used for some things while the other is used for different things?
I'm asking because we might be making some changes to our network. We have a printer with a Fiery RIP and I'm pretty much the only one who prints to it. I was wondering if we could/should set up a direct, dedicated connection so that network traffic won't bog down print jobs.

The main use for that port today is to create a subnetwork for Internet Sharing. Software inside the Mac can act as a Router and provides new DHCP Addresses for the subnetwork. In general, the devices on the subnetwork would be inaccessible from anywhere else, due to Network Address Translation.
If you are concerned about heavy network traffic, consider upgrading your Switches (not Routers) to Gigabit Ethernet speeds and using Jumbo frames. (Routers are not involved in peer-to-peer transfers such as Printing when no Address Translation is involved.)
If you have an Industrial Router, you can combine the two Ethernet ports into one composite link for faster-than-Gigabit effective speeds, but it requires a special Router not generally available.

How do I add an airport extreme to existing time capsule network and be able to use the router ethernet ports?

Good day everyone. I recently upgraded my airport extreme network by replacing the base station with a time capsule router. Since I now have an "extra" airport extreme router, I've set it up on the other side of the house to both extend the wireless range as well as use it's LAN ports for a home theater system in that location. Connecting the two routers was done via ethernet. It now appears that I need to do something "else" as the LAN ports on the now relocated airport extreme are nonfunctional. All devices are operating well for wireless and as a review, the modem is connected to the time capsule WAN which is connected to the airport extreme via ethernet cable via LAN to it's WAN port. What do I need to change on configurations to get the LAN ports functioning on the airport extreme? Thank you for any help.

Connecting the two routers was done via ethernet. It now appears that I need to do something "else" as the LAN ports on the now relocated airport extreme are nonfunctional.
With both base stations interconnected by Ethernet you have the basis for a "roaming" type network. If properly configured, both base stations' Ethernet ports would be enabled for wired clients.
The key configuration items for a roaming network are as follows:
All base stations used must be interconnected by Ethernet.
The "main" base station; the one connected to the Internet modem, must be configured to provide both NAT & DHCP services; all other base stations used must be configured as bridges (NAT & DHCP disabled.)
Each base station must have a unique base station name.
Each base station must use the same wireless security type and password.

Help needed in Java Printing Service

I need to print an image using the new JPS API, but with specific requirements.
I managed to find out how to get the image printed from my HD onto the printer by using the example given in the JPS user guide. But I can't seem to find out how to achieve the most important requirement.
I need to be able to control the printing position as well as the printed size of the image. Can anyone help me with it? I can't seem to find proper documentation that is related to the topic.
Thanks in advance.

I tried using the MediaSize class by constructing a custom sized media. But when I compiled it, I kept getting a "cannot resolve symbol" error for MediaSize.
Then returning to the MediaSize documentation page, it said that it is not yet used to specify media. Does that mean I have to wait?
The other thing is, I tried another approach using the java.awt.print package. Can you help me out with this piece of code, how do I correct it :
Paper paper = new Paper();
PageFormat page = new PageFormat();
paper.setImageableArea(0,0,600,800);
page.setPaper(paper);
DocPrintJob printJob = pservices[0].createPrintJob(); *
printJob.setPrintable(this,page);
I am using the javax.print package on the * line, but the rest is from the java.awt.print method. However, I kept getting a "non-static variable cannot be referenced from a non-static context" error.
What's wrong? Thanks.

Do I need to leave location services on all the time to use the "Find my iPhone" app?

Do I need to leave location services on all the time to use the "Find my iPhone" app?

The Find My IPhone app is used to find OTHER lost devices, it does nothing to make your device "findable". To make it findable, you must turn on "Find My IPhone" in settings. And than you need location services on. This however does not guarantee that you'll always find it if lost. A thief can set it to factory settings, even remove the sim card. Then it'll be unfindable.

Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities.

Hello,
I have the following scenario for the installation of EPM 2013 environment:
1 Server running Windows 2008 R2 SQL Server 2008 R2 Service Pack 2
1 Windows Server 2008 R2 Standard SP1, running Sharepoint 2013 Enterprise (Standard Initially installed and then migrated to the Enterprise in order to install Project Server 2013), Project Server 2013 and Workflow 1.0 (2013).
After configuring and validating the configuration of Workflow 1.0 by http://server_name.example.com:12291 page and also check the Application Services in Central Administration and receive the Workflow Status = Connected.
Alright, but when I run the SPD 2013 RTM to test the creation of Sharepoint Workflow 2013, I get the following warning:
"Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities."
I've tried:
a. Restart SPD2013;
b. Restart Server 2013 and Sharepoint Workflow 1.0;
c. Reinstall and reconfigure Workflow 1.0
And the message is always displayed, preventing the use of Workflow Sharepoint 2013.
Can anyone help me, I'm in the middle of a deployment to a customer.
Print of alert

How did you uninstalledLanguage Pack from SharePoint 2013 ? when I googled it I found that language pack cannot be uninstall@
http://technet.microsoft.com/en-us/library/cc262108.aspx
"If you no longer have to support a language for which you have installed a language pack, you can remove the language pack by using the Control Panel. Removing a language pack removes the language-specific site
templates from the computer. All sites that were created that have those language-specific site templates will no longer work (the URL will produce a HTTP 500 - Internal server error page). Reinstalling the language pack will make the site functional again.
You cannot remove the language pack for the version of SharePoint 2013 that you have installed on the server. For example, if you are running the Japanese version of SharePoint 2013, you cannot uninstall the Japanese language support for SharePoint 2013."

How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file?

How can we send only one message to a WCF service at a time? How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file? Can we do it by Host throttling?

Hi Pawan,
You need to use WCF-Custom adapter and add the ServiceThrottlingBehavior service behavior to a WCF-Custom Locations.
ServiceThrottlingBehavior.MaxConcurrentCalls - Gets or sets a value that specifies the maximum number of messages actively processing across a ServiceHost. The MaxConcurrentCalls property specifies the maximum number of messages actively
processing across a ServiceHost object. Each channel can have one pending message that does not count against the value of MaxConcurrentCalls until WCF begins to process it.
Follow MSDN-
http://msdn.microsoft.com/en-us/library/ee377035%28BTS.10%29.aspx
http://msdn.microsoft.com/en-us/library/system.servicemodel.description.servicethrottlingbehavior.maxconcurrentcalls.aspx
I hope this helps.
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

While saving a workflow using SharePoint designer on a SharePoint site, I get the following error:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
Steps to recreate error:
Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
Access the list using SharePoint Designer 2013, in the workflow section, click new workflow.
In the new workflow dialog, enter workflow details, click save (see screenshot below).
Error message is displayed as below:
After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
Workaround
When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
Notes
Workflow Manager 1.0 is installed.
The site has been registered with Workflow manager using Register-SPWorkflowService
cmdlet.
Any clue on why is this happening?

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT2188 i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/s

i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen

Have you downloaded and installed the latest version of iTunes from here:
http://www.apple.com/itunes/download/

Who can tell me how to use the transction "KKRC"?

who can tell me how to use the transction "KKRC"?
Please explain me all the steps to be required.
Thanks in advance!

hi..
http://help.sap.com/bp_bl603/BBLibrary/Documentation/181_BPP_EN_BR.doc
KKBC HOE Transaction code Error
Regards

Updating PS CC 2014--how can I tell if I am using the latest version?

I just updated Bridge, PS and LR from the Creative Cloud, but when I went to use them, I was still using the old versions despite the fact that CC said I had updated to the latest versions. A thread in the LR forum led me to sign out and back into Creative Cloud, and that did the trick for LR. However, I cannot discern any changes in PS. How can I tell if I am using the latest version of PS? When I click on About Photoshop, the popup says:
TIA.

that's the latest ps as of today.

I am unable to print "ALL Pages" using the Adobe Print plugin in Firefox, only the first page gets printes. however IE works perfectly fine.Please advise. Is it some way that firefox identifies the complete web page..? PLease help

I am unable to print "ALL Pages" using the Adobe Print plugin in Firefox, only the first page gets printes. however IE works perfectly fine.Please advise. Is it some way that firefox identifies the complete web page..? PLease help

Does the entire webpage appear in Print Preview? <br />
File > Print Preview

Can any body tell me how to use the TCODE:ABF1 ?

Can any body tell me how to use the TCODE:ABF1 ?
Can any body tell me the different of the ABF1 and FB01?
Thank very much.

Hi Jie,
both Transaction codes are working are same.
Both are working through program : SAPMF05A.
Packages are different: FIDC & AB.
FB01 : we can control objects through F_BKPF_BUK
Hope its clear.
Kishore K

HT1689 can anyone simply tell me how to use the "find my ipod" feature through my itunes account that has the ipod registered?

Can anyone tell me how to use the "find my ipod" app that I have for my ipod? I have the ipod registered on my itunes account but I can get the serial # to send it in for apple support? How does this feature work? Thanks

Turn on your computer.
Open your Browser.
Go to icloud.com
Select find my iphone/ipod

How to use the (gigabit) ethernet for data exchange and WLAN for Internet?

I have following setup:
- MB Pro SL 10.6
- Desktop PC Windows 7
- Wireless Printer
- Netgear WLAN Router
At the moment all my data and internet communication is done via the WLAN router on 192.168.1.x That works fine and I can exchange data, print and surf the internet. My problem is that big data exchanges > 10GB take ages via my 54Mbit WLAN Connection. Furthermore the WLAN router is far away from the PC so that it is not possible to plug in the Ethernet Cable of the PC and the MB to the router.
Now I've thought that there must be a possibility to use a 1 gigabit (cross) cable (like in the 90s ;)) to connect the MB and the PC directly. I know that I will need different IP ranges and so on, but I have no clue how to do that.
The final solution should be that the setup stays as it is (data exchange, print, internet via WLAN) and that additional it is possible to connect PC and MAC some times for big transfers via a Gigabit ethernet cable. because I only want to connect those two machines I don't think that a switch makes any sense, or?
Does someone know how to do that?
Thanks a lot in advance!
Message was edited by: whitepowder

Well if it were 2 Macs, I would configure each Mac with a fixed IP address (same subnet as my router, but outside of the routers DHCP assignment range).
I would give the same fixed IP address to both my Airport AND my ethernet interfaces. I would do the same to the other Mac using another fixed IP address.
My network service order would have the ethernet higher than the Airport on both systems.
Normally I would use WiFi, so ethernet would be idle and out of the loop.
When I wanted faster transfers, I would connect each Mac to the router via their own ethernet cables, and the Mac would automatically detect that the ethernet became available, and would switch to use the faster ethernet. Since Airport and ethernet have the same fixed IP address, I could even do this in the middle of a file transfer and no one would notice as packets were always going to/from the same IP addresses, just using a different route, which doesn't matter.
NOTE: I've been doing this on Macs since Mac OS X 10.3 days (or was it 10.2; to long ago to remember).
However, you have thrown a Windows system into the mix, and since I do not use Windows, I do not have a clue about what can be done on Windows. However, maybe this will give you some ideas, and asking the right questions in a Windows oriented forum may provide the Windows side of this setup.
Sorry, that is the best I can do. Maybe my reply will encourage someone else to offer their approach.

I need to tell Print services to use the 2nd ethernet port

Similar Messages

Maybe you are looking for