I/O error when adding quorum device

Hi all, i'm in the process of building a two-node 3.2 Sun cluster using two HP DL380 servers. I seem to have managed to get the sun cluster 3.2 s/w installed on both nodes but i'm having problems adding a quorum device.
Using either scsetup or clquorum, i get the following error:
# /usr/cluster/bin/clquorum add d4
clquorum: (C192716) I/O error.
Does anyone know what this means?
Thanks in advance,
Stewart
******** Here are my devices ***********
# /usr/cluster/bin/cldevice list -v
DID Device Full Device Path
d1 nfst1:/dev/rdsk/c1t0d0
d2 nfst1:/dev/rdsk/c3t0d0
d3 nfst1:/dev/rdsk/c2t5006016A106023E0d4
d3 nfst1:/dev/rdsk/c2t50060162106023E0d4
d3 nfst2:/dev/rdsk/c2t50060160106023E0d4
d3 nfst2:/dev/rdsk/c2t50060168106023E0d4
d4 nfst1:/dev/rdsk/c2t5006016A106023E0d3
d4 nfst1:/dev/rdsk/c2t50060162106023E0d3
d4 nfst2:/dev/rdsk/c2t50060160106023E0d3
d4 nfst2:/dev/rdsk/c2t50060168106023E0d3
d5 nfst1:/dev/rdsk/c2t5006016A106023E0d2
d5 nfst1:/dev/rdsk/c2t50060162106023E0d2
d5 nfst2:/dev/rdsk/c2t50060160106023E0d2
d5 nfst2:/dev/rdsk/c2t50060168106023E0d2
d6 nfst1:/dev/rdsk/c2t5006016A106023E0d1
d6 nfst1:/dev/rdsk/c2t50060162106023E0d1
d6 nfst2:/dev/rdsk/c2t50060160106023E0d1
d6 nfst2:/dev/rdsk/c2t50060168106023E0d1
d7 nfst1:/dev/rdsk/c2t5006016A106023E0d0
d7 nfst1:/dev/rdsk/c2t50060162106023E0d0
d7 nfst2:/dev/rdsk/c2t50060160106023E0d0
d7 nfst2:/dev/rdsk/c2t50060168106023E0d0
d8 nfst1:/dev/rdsk/c2t5006016A1060235Dd3
d8 nfst1:/dev/rdsk/c2t500601621060235Dd3
d8 nfst2:/dev/rdsk/c2t500601681060235Dd3
d8 nfst2:/dev/rdsk/c2t500601601060235Dd3
d9 nfst1:/dev/rdsk/c2t5006016A1060235Dd2
d9 nfst1:/dev/rdsk/c2t500601621060235Dd2
d9 nfst2:/dev/rdsk/c2t500601681060235Dd2
d9 nfst2:/dev/rdsk/c2t500601601060235Dd2
d10 nfst1:/dev/rdsk/c2t5006016A1060235Dd1
d10 nfst1:/dev/rdsk/c2t500601621060235Dd1
d10 nfst2:/dev/rdsk/c2t500601681060235Dd1
d10 nfst2:/dev/rdsk/c2t500601601060235Dd1
d11 nfst1:/dev/rdsk/c2t5006016A1060235Dd0
d11 nfst1:/dev/rdsk/c2t500601621060235Dd0
d11 nfst2:/dev/rdsk/c2t500601681060235Dd0
d11 nfst2:/dev/rdsk/c2t500601601060235Dd0
d12 nfst1:/dev/rdsk/c2t5006016830220BA0d0
d12 nfst1:/dev/rdsk/c2t5006016130220BA0d0
d12 nfst2:/dev/rdsk/c2t5006016930220BA0d0
d12 nfst2:/dev/rdsk/c2t5006016030220BA0d0
d13 nfst2:/dev/rdsk/c1t0d0
d14 nfst2:/dev/rdsk/c3t0d0
Cluster DID Devices ===
Device Instance Node Status
/dev/did/rdsk/d10 nfst1 Ok
nfst2 Ok
/dev/did/rdsk/d11 nfst1 Ok
nfst2 Ok
/dev/did/rdsk/d12 nfst1 Ok
nfst2 Ok
/dev/did/rdsk/d14 nfst2 Ok
/dev/did/rdsk/d2 nfst1 Ok
/dev/did/rdsk/d3 nfst1 Ok
nfst2 Ok
/dev/did/rdsk/d4 nfst1 Ok
nfst2 Ok
/dev/did/rdsk/d5 nfst1 Ok
nfst2 Ok
/dev/did/rdsk/d6 nfst1 Ok
nfst2 Ok
/dev/did/rdsk/d7 nfst1 Ok
nfst2 Ok
/dev/did/rdsk/d8 nfst1 Ok
nfst2 Ok
/dev/did/rdsk/d9 nfst1 Ok
nfst2 Ok

Hi All,
I have a very similar problem, maybe someone has seen it ?
I'm trying to finish installation of Sun Solaris 3.2 on two Sun-Fire-V240s (HBAs are QLogic QLA2342) over SPARC Solaris 10.
When I get to the stage of adding a quorum disk to Sun Cluster 3.2:
# scconf -a -q globaldev=d24
the following error is received:
scconf: Failed to add quorum device (d24) - unable to scrub the device.
I ran the commands:
# scdidadm -r
# scdidadm -i
# scdidadm -L
Where the d24 is as follows:
# scdidadm -L
24 SRV-00-003:/dev/rdsk/c5t128d41 /dev/did/rdsk/d24
24 SRV-00-049:/dev/rdsk/c5t128d41 /dev/did/rdsk/d24
# ls -ls /dev/did/rdsk/d24
2 lrwxrwxrwx 2 root root 42 Apr 7 13:40 /dev/did/rdsk/d24 -> ../../../devices/pseudo/did@24:24,24s7,raw
Format describes the disk as:
Current Disk = c5t128d40
<StoreAge-rbarak_vol40_clu-#12 cyl 98 alt 2 hd 4 sec 512>
/pseudo/vhba@0/vsd@80,28
I Googled the net, and beside references to disks bigger than 1 GB, I couldn't find any relevant suggestions.
Anyone has any experience with this "unable to scrub the device" error ?
Thanks,
Ron.

Similar Messages

Error when adding a partition to a materlialized view

Hi,
I am getting this error when adding a partition to a materialized view.
ALTER MATERIALIZED VIEW mvedw.MV_CLM_CAPITN_F ADD PARTITION MAR2013 VALUES LESS THAN ('201304')
ERROR at line 1:
ORA-14074: partition bound must collate higher than that of the last partition
Please advise.
Regards,
Narayan

SQL> select TABLE_OWNER,TABLE_NAME,PARTITION_NAME,HIGH_VALUE from dba_tab_partitions where table_name =
'MV_CLM_CAPITN_F' order by PARTITION_NAME 2
3 ;
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F APR2009 '200905'
MVEDW MV_CLM_CAPITN_F APR2010 '201005'
MVEDW MV_CLM_CAPITN_F APR2011 '201105'
MVEDW MV_CLM_CAPITN_F APR2012 '201205'
MVEDW MV_CLM_CAPITN_F AUG2009 '200909'
MVEDW MV_CLM_CAPITN_F AUG2010 '201009'
MVEDW MV_CLM_CAPITN_F AUG2011 '201109'
MVEDW MV_CLM_CAPITN_F AUG2012 '201209'
MVEDW MV_CLM_CAPITN_F DEC2008 '200901'
MVEDW MV_CLM_CAPITN_F DEC2009 '201001'
MVEDW MV_CLM_CAPITN_F DEC2010 '201101'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F DEC2012 '201301'
MVEDW MV_CLM_CAPITN_F FEB2009 '200903'
MVEDW MV_CLM_CAPITN_F FEB2010 '201003'
MVEDW MV_CLM_CAPITN_F FEB2011 '201103'
MVEDW MV_CLM_CAPITN_F FEB2012 '201203'
MVEDW MV_CLM_CAPITN_F FEB2013 '201303'
MVEDW MV_CLM_CAPITN_F JAN2009 '200902'
MVEDW MV_CLM_CAPITN_F JAN2010 '201002'
MVEDW MV_CLM_CAPITN_F JAN2011 '201102'
MVEDW MV_CLM_CAPITN_F JAN2012 '201202'
MVEDW MV_CLM_CAPITN_F JAN2013 '201302'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F JUL2009 '200908'
MVEDW MV_CLM_CAPITN_F JUL2010 '201008'
MVEDW MV_CLM_CAPITN_F JUL2011 '201108'
MVEDW MV_CLM_CAPITN_F JUL2012 '201208'
MVEDW MV_CLM_CAPITN_F JUN2009 '200907'
MVEDW MV_CLM_CAPITN_F JUN2010 '201007'
MVEDW MV_CLM_CAPITN_F JUN2011 '201107'
MVEDW MV_CLM_CAPITN_F JUN2012 '201207'
MVEDW MV_CLM_CAPITN_F MAR2009 '200904'
MVEDW MV_CLM_CAPITN_F MAR2010 '201004'
MVEDW MV_CLM_CAPITN_F MAR2011 '201104'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F MAR2012 '201204'
MVEDW MV_CLM_CAPITN_F MAR2013 '201304'
MVEDW MV_CLM_CAPITN_F MAY2009 '200906'
MVEDW MV_CLM_CAPITN_F MAY2010 '201006'
MVEDW MV_CLM_CAPITN_F MAY2011 '201106'
MVEDW MV_CLM_CAPITN_F NOV2009 '200912'
MVEDW MV_CLM_CAPITN_F NOV2010 '201012'
MVEDW MV_CLM_CAPITN_F NOV2012 '201212'
MVEDW MV_CLM_CAPITN_F OCT2009 '200911'
MVEDW MV_CLM_CAPITN_F OCT2010 '201011'
MVEDW MV_CLM_CAPITN_F OCT2011 '201111'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F OCT2012 '201211'
MVEDW MV_CLM_CAPITN_F SEP2009 '200910'
MVEDW MV_CLM_CAPITN_F SEP2010 '201010'
MVEDW MV_CLM_CAPITN_F SEP2011 '201110'
MVEDW MV_CLM_CAPITN_F SEP2012 '201210'
These are the list of partitions available.
Regards,
Narayan

Error when adding Essbase server...

Hi,
I installed Hyperion System 9.3.1 in my development machine and encounter the following error when adding a Essbase server in AAS for the first time.
Error: 1042017: Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.
I used the default user "admin" and password "password". I used my servername:10080 as the server name. I hope I am right.
Why is this happening? I tried changing netdelay settings but still get the same. Is this something else? Does this have anything to do with my TCP/IP settings? I am installing this on a virtual PC.
I couldn't find an answer in previous posts.
regards
h

The things that come to mind:
The server name you use should be the name of the virtual PC, not the machine it's running on. Also, depending on the settings for the Virtual PC environment, you may have to change the network options to allow it to be visible to the network, be in the right domain, etc...
The above may or may not get you any closer, the error message itself is just saying it can't receive a response from the server, which means the server never got the request or can't send a response back.
Good Luck,

Library error when adding contact or when logging in

The messenger server has a replica of the partition holding the users.
It's an OES 2 sp2 server, and the GW Messenger is 2.04.
Sometimes we see an error that says 'Library error' when adding a contact, or it doesn't show all users that exists with the search parameter given.
We also sporadically see a 'Library error' when some users log in to it.
Looking in the log I see an error that says 0xAE16 when users log in fails.
I can find the 0xAE11 error in the TID's but not the 0xAE16, I did find an article on the forums, mentioning this problem http://forums.novell.com/novell-prod...or-server.html, they mention memory problems, so it seems to me there is a bug that needs fixing.

I've disabled the '/diruseralias-"Internet EMail Address"' setting that was set up in the strtup.ma and strtup.aa scripts.
I've also, for now at least, chosen another replica.
I haven't seen the errors yet, so here's hoping...

Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled

When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.
Using Oracle EBS version 12.1.3.
Details:
Menu JOB_STRUCTURE_MENU
User Menu Name Job Strucure Menu
Menu Type Standard
Description Menu to add job, grade, and incentives
Seq = 1
Prompt = Enter and Maintain
Function = Combined Person & Assignment Form WF="US SHRMS TSKFLW
When I click save I get the error.
Any assistance would be greatly appreciated.
Thanks!

Please post the details of the application release, database version and OS.
When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.Is the issue with all menus or specific ones only?
Did AutoConfig complete successfully?
When I click save I get the error.
Any assistance would be greatly appreciated.Do you have any invalid objects in the database?
Any errors in the database log file?
Please obtain FRD log file for details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How do I stop iphoto opening on start up of mac? (not when adding a device etc)

How do I stop iPhoto opening whenever I start up my mac? (not when adding a device etc) There are lots of answers for stopping it auto-opening when attaching a camera, iPod/Pad and I have 'no application' selected for those, I just cant pin-point how to change the basic start-up/loading setting. Thanks :-)

In iPhoto go to the General preference pane and set No Application as the option when a camera is connected
If that doesn't do the trick connect your device to the Mac and launch Image Capture. In the lower left hand corner select No Application again:

Error when adding a WLC to WCS

When adding a WLC to WCS I get this error: Failed to add device to WCS Reason:
COMMON-1: Some unexpected internal error has occured. If the problem persists please report to the Tech Support.
WCS 7.0.164.0 was upgraded from 5.2.110.0 because the WLC were running 7.0.98.0
WLC4404-100 7.0.98.0 (Already in WCS)
WLC4402-12 7.0.98.0 (Changed the ip address of the management and ap manager. Was in WCS but deleted from WCS prior to the ip address change and prior to the WCS being upgraded)
I know that the snmp strings are fine and that the WLC's both respond to snmp get commands.
The intial WCS upgrade from 5.2.110.0 to 7.0.164.0 didn't require the previous version to be uninstalled. After the upgrade and restoring the WCS from backup. I was getting the error posted above. We uninstalled WCS and re-installed WCS from scratch and still we are getting the same error. We tried restarting the WCS services and also the VM box as well and not luck. I was wondering if the WCS has the old ip and mac address of the WLC4402-12 in the database and that is why i'm getting this error.
I did delete and try different snmp community strings with no luck with WCS. Again, snmp is working since I can do snmp get from the WLC's.

Scott,
This is the issue:
com.cisco.common.persistence.transaction.TransactionException: Null value was assigned to a property of primitive type setter of com.cisco.server.managedobjects.aaa.GuestUserTemplateCG.userStatus
Could be an existing bug or a new one. I cant say unless I look into your setup.

TableSorter errors when adding new data

so here is the deal:
I am using the TableSorter.java helper class with DefaultTableModel
from: http://java.sun.com/docs/books/tutorial/uiswing/components/table.html
It works great when the data is static and I get it for the first time. however, occationally, when adding new data I get a NullPointerException error.
in use:
DefaultTableModel.addRow()
DefaultTableModel.removeRow() and
DefaultTableModel.insertRow() methods.
Error:
java.lang.ArrayIndexOutOfBoundsException: 5
     at com.shared.model.TableSorter.modelIndex(TableSorter.java:294)
     at com.shared.model.TableSorter.getValueAt(TableSorter.java:340)
     at javax.swing.JTable.getValueAt(Unknown Source)
     at javax.swing.JTable.prepareRenderer(Unknown Source)...
code problem I:
    public Object getValueAt(int row, int column)
        return tableModel.getValueAt(modelIndex(row), column);
    }code problem II:
    public int modelIndex(int viewIndex)
             return getViewToModel()[viewIndex].modelIndex;
    }TableSroter class:
package com.shared.model;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.util.List;
import javax.swing.*;
import javax.swing.event.TableModelEvent;
import javax.swing.event.TableModelListener;
import javax.swing.table.*;
* TableSorter is a decorator for TableModels; adding sorting
* functionality to a supplied TableModel. TableSorter does
* not store or copy the data in its TableModel; instead it maintains
* a map from the row indexes of the view to the row indexes of the
* model. As requests are made of the sorter (like getValueAt(row, col))
* they are passed to the underlying model after the row numbers
* have been translated via the internal mapping array. This way,
* the TableSorter appears to hold another copy of the table
* with the rows in a different order.
* <p/>
* TableSorter registers itself as a listener to the underlying model,
* just as the JTable itself would. Events recieved from the model
* are examined, sometimes manipulated (typically widened), and then
* passed on to the TableSorter's listeners (typically the JTable).
* If a change to the model has invalidated the order of TableSorter's
* rows, a note of this is made and the sorter will resort the
* rows the next time a value is requested.
* <p/>
* When the tableHeader property is set, either by using the
* setTableHeader() method or the two argument constructor, the
* table header may be used as a complete UI for TableSorter.
* The default renderer of the tableHeader is decorated with a renderer
* that indicates the sorting status of each column. In addition,
* a mouse listener is installed with the following behavior:
* <ul>
* <li>
* Mouse-click: Clears the sorting status of all other columns
* and advances the sorting status of that column through three
* values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to
* NOT_SORTED again).
* <li>
* SHIFT-mouse-click: Clears the sorting status of all other columns
* and cycles the sorting status of the column through the same
* three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
* <li>
* CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except
* that the changes to the column do not cancel the statuses of columns
* that are already sorting - giving a way to initiate a compound
* sort.
* </ul>
* <p/>
* This is a long overdue rewrite of a class of the same name that
* first appeared in the swing table demos in 1997.
* @author Philip Milne
* @author Brendon McLean
* @author Dan van Enckevort
* @author Parwinder Sekhon
* @version 2.0 02/27/04
public class TableSorter extends AbstractTableModel
    protected TableModel tableModel;
    public static final int DESCENDING = -1;
    public static final int NOT_SORTED = 0;
    public static final int ASCENDING = 1;
    private static Directive EMPTY_DIRECTIVE = new Directive(-1, NOT_SORTED);
    public static final Comparator COMPARABLE_COMAPRATOR = new Comparator()
        public int compare(Object o1, Object o2)
            return ((Comparable) o1).compareTo(o2);
    public static final Comparator LEXICAL_COMPARATOR = new Comparator()
        public int compare(Object o1, Object o2)
            return o1.toString().compareTo(o2.toString());
    private Row[] viewToModel;
    private int[] modelToView;
    private JTableHeader tableHeader;
    private MouseListener mouseListener;
    private TableModelListener tableModelListener;
    private Map columnComparators = new HashMap();
    private List sortingColumns = new ArrayList();
    public TableSorter()
        this.mouseListener = new MouseHandler();
        this.tableModelListener = new TableModelHandler();
    public TableSorter(TableModel tableModel)
        this();
        setTableModel(tableModel);
    public TableSorter(TableModel tableModel, JTableHeader tableHeader)
        this();
        setTableHeader(tableHeader);
        setTableModel(tableModel);
    private void clearSortingState()
        viewToModel = null;
        modelToView = null;
    public TableModel getTableModel()
        return tableModel;
    public void setTableModel(TableModel tableModel)
        if (this.tableModel != null)
            this.tableModel.removeTableModelListener(tableModelListener);
        this.tableModel = tableModel;
        if (this.tableModel != null)
            this.tableModel.addTableModelListener(tableModelListener);
        clearSortingState();
        fireTableStructureChanged();
    public JTableHeader getTableHeader()
        return tableHeader;
    public void setTableHeader(JTableHeader tableHeader)
        if (this.tableHeader != null)
            this.tableHeader.removeMouseListener(mouseListener);
            TableCellRenderer defaultRenderer = this.tableHeader.getDefaultRenderer();
            if (defaultRenderer instanceof SortableHeaderRenderer)
                this.tableHeader.setDefaultRenderer(((SortableHeaderRenderer) defaultRenderer).tableCellRenderer);
        this.tableHeader = tableHeader;
        if (this.tableHeader != null)
            this.tableHeader.addMouseListener(mouseListener);
            this.tableHeader.setDefaultRenderer
                    new SortableHeaderRenderer(this.tableHeader.getDefaultRenderer())
    public boolean isSorting()
        return sortingColumns.size() != 0;
    private Directive getDirective(int column)
        for (int i = 0; i < sortingColumns.size(); i++)
            Directive directive = (Directive)sortingColumns.get(i);
            if (directive.column == column)
                return directive;
        return EMPTY_DIRECTIVE;
    public int getSortingStatus(int column)
        return getDirective(column).direction;
    private void sortingStatusChanged()
        clearSortingState();
        fireTableDataChanged();
        if (tableHeader != null)
            tableHeader.repaint();
    public void setSortingStatus(int column, int status)
        Directive directive = getDirective(column);
        if (directive != EMPTY_DIRECTIVE)
            sortingColumns.remove(directive);
        if (status != NOT_SORTED)
            sortingColumns.add(new Directive(column, status));
        sortingStatusChanged();
    protected Icon getHeaderRendererIcon(int column, int size)
        Directive directive = getDirective(column);
        if (directive == EMPTY_DIRECTIVE)
            return null;
        return new Arrow(directive.direction == DESCENDING, size, sortingColumns.indexOf(directive));
    private void cancelSorting()
        sortingColumns.clear();
        sortingStatusChanged();
    public void setColumnComparator(Class type, Comparator comparator)
        if (comparator == null)
            columnComparators.remove(type);
        else
            columnComparators.put(type, comparator);
    protected Comparator getComparator(int column)
        Class columnType = tableModel.getColumnClass(column);
        Comparator comparator = (Comparator) columnComparators.get(columnType);
        if (comparator != null)
            return comparator;
        if (Comparable.class.isAssignableFrom(columnType))
            return COMPARABLE_COMAPRATOR;
        return LEXICAL_COMPARATOR;
    private Row[] getViewToModel()
        if (viewToModel == null)
            int tableModelRowCount = tableModel.getRowCount();
            viewToModel = new Row[tableModelRowCount];
            for (int row = 0; row < tableModelRowCount; row++)
                viewToModel[row] = new Row(row);
            if (isSorting())
                Arrays.sort(viewToModel);
        return viewToModel;
    public int modelIndex(int viewIndex)
             return getViewToModel()[viewIndex].modelIndex;
    private int[] getModelToView()
        if (modelToView == null)
            int n = getViewToModel().length;
            modelToView = new int[n];
            for (int i = 0; i < n; i++)
                modelToView[modelIndex(i)] = i;
        return modelToView;
    // TableModel interface methods
    public int getRowCount()
        return (tableModel == null) ? 0 : tableModel.getRowCount();
    public int getColumnCount()
        return (tableModel == null) ? 0 : tableModel.getColumnCount();
    public String getColumnName(int column)
        return tableModel.getColumnName(column);
    public Class getColumnClass(int column)
        return tableModel.getColumnClass(column);
    public boolean isCellEditable(int row, int column)
        return tableModel.isCellEditable(modelIndex(row), column);
    public Object getValueAt(int row, int column)
        return tableModel.getValueAt(modelIndex(row), column);
    public void setValueAt(Object aValue, int row, int column)
        tableModel.setValueAt(aValue, modelIndex(row), column);
    // Helper classes
    private class Row implements Comparable
        private int modelIndex;
        public Row(int index)
            this.modelIndex = index;
        public int compareTo(Object o)
            int row1 = modelIndex;
            int row2 = ((Row) o).modelIndex;
            for (Iterator it = sortingColumns.iterator(); it.hasNext();)
                Directive directive = (Directive) it.next();
                int column = directive.column;
                Object o1 = tableModel.getValueAt(row1, column);
                Object o2 = tableModel.getValueAt(row2, column);
                int comparison = 0;
                // Define null less than everything, except null.
                if (o1 == null && o2 == null)
                    comparison = 0;
                } else if (o1 == null)
                    comparison = -1;
                } else if (o2 == null)
                    comparison = 1;
                } else {
                    comparison = getComparator(column).compare(o1, o2);
                if (comparison != 0)
                    return directive.direction == DESCENDING ? -comparison : comparison;
            return 0;
    private class TableModelHandler implements TableModelListener
        public void tableChanged(TableModelEvent e)
            // If we're not sorting by anything, just pass the event along.
            if (!isSorting())
                clearSortingState();
                fireTableChanged(e);
                return;
            // If the table structure has changed, cancel the sorting; the
            // sorting columns may have been either moved or deleted from
            // the model.
            if (e.getFirstRow() == TableModelEvent.HEADER_ROW)
                cancelSorting();
                fireTableChanged(e);
                return;
            // We can map a cell event through to the view without widening
            // when the following conditions apply:
            // a) all the changes are on one row (e.getFirstRow() == e.getLastRow()) and,
            // b) all the changes are in one column (column != TableModelEvent.ALL_COLUMNS) and,
            // c) we are not sorting on that column (getSortingStatus(column) == NOT_SORTED) and,
            // d) a reverse lookup will not trigger a sort (modelToView != null)
            // Note: INSERT and DELETE events fail this test as they have column == ALL_COLUMNS.
            // The last check, for (modelToView != null) is to see if modelToView
            // is already allocated. If we don't do this check; sorting can become
            // a performance bottleneck for applications where cells
            // change rapidly in different parts of the table. If cells
            // change alternately in the sorting column and then outside of
            // it this class can end up re-sorting on alternate cell updates -
            // which can be a performance problem for large tables. The last
            // clause avoids this problem.
            int column = e.getColumn();
            if (e.getFirstRow() == e.getLastRow()
                    && column != TableModelEvent.ALL_COLUMNS
                    && getSortingStatus(column) == NOT_SORTED
                    && modelToView != null)
                int viewIndex = getModelToView()[e.getFirstRow()];
                fireTableChanged(new TableModelEvent(TableSorter.this,
                                                     viewIndex, viewIndex,
                                                     column, e.getType()));
                return;
            // Something has happened to the data that may have invalidated the row order.
            clearSortingState();
            fireTableDataChanged();
            return;
    private class MouseHandler extends MouseAdapter
        public void mouseClicked(MouseEvent e)
            JTableHeader h = (JTableHeader) e.getSource();
            TableColumnModel columnModel = h.getColumnModel();
            int viewColumn = columnModel.getColumnIndexAtX(e.getX());
            int column = columnModel.getColumn(viewColumn).getModelIndex();
            if (column != -1)
                int status = getSortingStatus(column);
                if (!e.isControlDown())
                    cancelSorting();
                // Cycle the sorting states through {NOT_SORTED, ASCENDING, DESCENDING} or
                // {NOT_SORTED, DESCENDING, ASCENDING} depending on whether shift is pressed.
                status = status + (e.isShiftDown() ? -1 : 1);
                status = (status + 4) % 3 - 1; // signed mod, returning {-1, 0, 1}
                setSortingStatus(column, status);
    private static class Arrow implements Icon
        private boolean descending;
        private int size;
        private int priority;
        public Arrow(boolean descending, int size, int priority)
            this.descending = descending;
            this.size = size;
            this.priority = priority;
        public void paintIcon(Component c, Graphics g, int x, int y)
            Color color = c == null ? Color.GRAY : c.getBackground();
            // In a compound sort, make each succesive triangle 20%
            // smaller than the previous one.
            int dx = (int)(size/2*Math.pow(0.8, priority));
            int dy = descending ? dx : -dx;
            // Align icon (roughly) with font baseline.
            y = y + 5*size/6 + (descending ? -dy : 0);
            int shift = descending ? 1 : -1;
            g.translate(x, y);
            // Right diagonal.
            g.setColor(color.darker());
            g.drawLine(dx / 2, dy, 0, 0);
            g.drawLine(dx / 2, dy + shift, 0, shift);
            // Left diagonal.
            g.setColor(color.brighter());
            g.drawLine(dx / 2, dy, dx, 0);
            g.drawLine(dx / 2, dy + shift, dx, shift);
            // Horizontal line.
            if (descending) {
                g.setColor(color.darker().darker());
            } else {
                g.setColor(color.brighter().brighter());
            g.drawLine(dx, 0, 0, 0);
            g.setColor(color);
            g.translate(-x, -y);
        public int getIconWidth()
            return size;
        public int getIconHeight()
            return size;
    private class SortableHeaderRenderer implements TableCellRenderer
        private TableCellRenderer tableCellRenderer;
        public SortableHeaderRenderer(TableCellRenderer tableCellRenderer)
            this.tableCellRenderer = tableCellRenderer;
        public Component getTableCellRendererComponent(JTable table,
                                                       Object value,
                                                       boolean isSelected,
                                                       boolean hasFocus,
                                                       int row,
                                                       int column)
            Component c = tableCellRenderer.getTableCellRendererComponent(table,
                    value, isSelected, hasFocus, row, column);
            if (c instanceof JLabel) {
                JLabel l = (JLabel) c;
                l.setHorizontalTextPosition(JLabel.LEFT);
                int modelColumn = table.convertColumnIndexToModel(column);
                l.setIcon(getHeaderRendererIcon(modelColumn, l.getFont().getSize()));
            return c;
    private static class Directive
        private int column;
        private int direction;
        public Directive(int column, int direction)
            this.column = column;
            this.direction = direction;
}any input will be appreciated.
thanks
Peter

The code you posted doesn't help us at all. Its just a duplicate of the code from the tutorial. The custom code is what you have written. For example do you update the TableModel from the Event Thread? Do you update the SortModel or the DefaultTableModel? If you actually provide your test code and somebody has already downloaded the sort classes, then maybe they will test your code against the classes. But I doubt if people will download the sort classes and create a test program just to see if they can duplicate your results (at least I know I'm not about to).

TableAdapter Configuration Wizard gives error when adding new TableAdapter

Hi,
I recently downloaded and installed the ODT for visual studio on my computer. I am running VS2008 on Windows 7 64-bit. I am able to create an ODP.NET connection to the Oracle XE 10.2g instance that is running on my computer with no problems and use that connection to browse the database. When I add a DataSet to my project, and start adding TableAdapters to the DataSet, I am getting errors. In an attempt to figure out what the problem is, I have followed various scenarios. I will describe each scenario, and what the end result is, and then after I have described them all, I will explain what I think the problem might be. Here are the different scenarios I have used:
Scenario 1:
From the Server Explorer, highlight ALL of the tables in my schema and drag them to the designer (all table adapters are added with no issues). I can add additional queries to each of the TableAdapters and then change the additional queries by right clicking and choosing "Configure". This all works with no issues. However, on certain TableAdapters, if I try to modify the primary query (Fill,GetData()), I can open the query editor just fine, change various settings, etc, but when I click on "Finish" I get the following error:
Configure TableAdapter TABLENAME failed.
Index was outside the bounds of the array.
Scenario 2:
From the Server Explorer, drag tables from my schema onto the designer one at a time. Some tables get added just fine, but for the rest of them, I get the following error:
Failed to merge object(s).
Index was outside the bounds of the array.
Scenario 3:
On the Dataset Designer, add tables one at a time by right clicking and choosing "Add -> TableAdapter" and then using SQL to define the query for each table. Some tables get added just fine, but for the rest of them, I get the following error:
Failed to add TableAdapter.
Index was outside the bounds of the array.
Ok... now that I have described all of the different scenarios, I will explain what I think the problem is, and why. Based on my research, I believe the underlying problem has to do with Foreign Key Constraints on the various tables. While working on Scenarios 2 & 3, the same exact tables worked just fine in both scenarios. When I started looking at the definitions for the tables in my schema, it turns out that all of the tables that failed had foreign key constraints defined. When I remove the FK constraints from a table, I am then able to add it to my dataset and change the default query with no problems. My original application used the System.Data.OracleClient provided by Microsoft. When adding my tableadapters using the microsoft data provider, the FK relations are automatically generated for me in the designer, but not with the Oracle Data Provider
I would be happy to provide you with the DDL that I used for creating my schema (it is not very big) if needed.
Thanks,
Jim

Sorry let me clarify some of the config a little more.
MAIL101 - Exch 2013
MAIL102 - Exch 2013
AP104 - Witness (strictly a witness nothing else on this machine)
EDGE01 - Exch 2007 Edge
CAS01 - Exch 2007 Hub/CAS load balancer for CAS02/03
CAS02 - Exch 2007 Hub/CAS
CAS03 - Exch 2007 Hub/CAS
MBOX01 - Exch 2007 Mail cluster
MBOX02 - Exch 2007 Mail cluster node
MBOX03 - Exch 2007 Mail cluster node
RDC01, RDC02, RDC03 - all 2008 R2 root domain controllers for rootdomain.rootdomain
DC01, DC02, DC03, DC04 - all 2008 R2 domain controllers for us.rootdomain.rootdomain
All DCs are Global Catalogs.
I can ping all DCs and root DCs fromboth MAIL101 and 102
The Exchange Replication service is running on both MAIL101 and 102.
DC03 is in the same site as the MAIL101/102 servers so I'll run all replication tests from here.
DCDIAG comes back with all tests passed.
repadmin /replsum comes back with 0 fails and no errors largest delta for any intersite communication is 13min.
When I run Test-ReplicationHealth -Identity MAIL101 and also 102 they both come back as everything passed. No errors.

Error when adding a disk to Cluster Shared Volumes

When adding a disk to Cluster Shared Volumes via Failover Cluster Manager, I get a couple of errors.
Event ID 5145 in System Log:
While adding the disk ('Cluster Disk 1') to Cluster Shared Volumes, setting explicit snapshot diff area association for volume ('\\?\Volume{420e2cc4-4fb4-41be-afb1-65f2ee62457a}\') failed with error 'HrError(0x8004230d)'. The only supported software snapshot
diff area association for Cluster Shared Volumes is to self.
Cluster disk resource 'Cluster Disk 1' failed to delete a software snapshot. The diff area on volume '\\?\Volume{420e2cc4-4fb4-41be-afb1-65f2ee62457a}\' could not be dissociated from volume '\\?\Volume{420e2cc4-4fb4-41be-afb1-65f2ee62457a}\'. This
may be caused by active snapshots. Cluster Shared Volumes requires that the software snapshot be located on the same disk.
Any ideas why I'm getting this error? This disk was previously added as a CSV to different Windows failover cluster, if that matters. Thanks.

Hi,
As the disk was previously used as a CSV, I assume there is still data on it.
Please check if any VSS snapshot created on that disk. If so, delete them and re-add it as a CSV to see the result - a quick way is to backup important files and perform a re-format if you cannot confirm.
If you have any feedback on our support, please send to [email protected]

Error when adding a schema to an existing workspace

I am trying to add an existing schema to my workspace, and am getting ORA-20001: Error with: GRANT EXECUTE ON DBMS_RLS TO BILLING ORA-01031: insufficient privileges. I tried logging in as sys and granting that privilege, and it worked. However, going back to the workspace, I still did not see the new schema listed.
The user and tables have all been created in the database. The BILLING schema showed up in the available schemas to add to the workspace. I have also tried adding a new schema to the workspace. The BILLING2 schema was created, but I received the same error when it tried to add it to the workspace.
Is there a grant or user that could be missing? I am using HTMLDB 2.0.
Thanks!

These are the current privs for that user:
ALTER DATABASE
ALTER SESSION
ALTER USER
CREATE ANY CONTEXT
CREATE ANY DIRECTORY
CREATE CLUSTER
CREATE DATABASE LINK
CREATE DIMENSION
CREATE INDEXTYPE
CREATE JOB
CREATE LIBRARY
CREATE MATERIALIZED VIEW
CREATE OPERATOR
CREATE PROCEDURE
CREATE PUBLIC SYNONYM
CREATE ROLE
CREATE SEQUENCE
CREATE SYNONYM
CREATE TABLE
CREATE TABLESPACE
CREATE TRIGGER
CREATE TYPE
CREATE USER
CREATE VIEW
DROP ANY DIRECTORY
DROP PUBLIC SYNONYM
DROP TABLESPACE
DROP USER
EXECUTE ANY PROCEDURE
SELECT ANY DICTIONARY
SELECT ANY TABLE
UNLIMITED TABLESPACE

Error when adding a database

Hi
I keep getting this error "Index was outside the bounds of the array. (microsoft.SQLserver.Smo)" when adding a new database.
How can I fix this
Thanks

Hi,
What version of SQL Server are you on? What version of SSMS?
Thanks, Andrew
My blog...

CRM 2013 error when adding a new appointment in Outlook.

When added
NEW DEADLINE The outlook on the calendar, I received an
error in CRM.
/////ERROR//////////////////////////////////////////////////////////////////////////////////////////
[2015-03-05 09:20:34.403] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread:   28 |Category: Exception |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | CrmException..ctor
ilOffset = 0x7
at CrmException..ctor(String message, Exception innerException, Int32 errorCode, Boolean isFlowControlException) ilOffset = 0x7
at CrmException..ctor(String message, Int32 errorCode) ilOffset = 0x5
at SecurityLibrary.RetrievePrivilegeForUser(IUser user, Guid privilege, ExecutionContext context) ilOffset = 0x14B
at SecurityLibrary.TryCheckPrivilege(Guid user, Guid privilege, ExecutionContext context) ilOffset = 0x3D
at SecurityLibrary.TryCheckPrivilege(SecurityPrincipal principal, Guid privilege, ExecutionContext context) ilOffset = 0x42
at SecurityLibrary.CheckPrivilege(SecurityPrincipal principal, Guid privilege, ExecutionContext context) ilOffset = 0x0
at AddressManager.GetOwnerCandidate(AddressEntry addressEntry) ilOffset = 0x50
at AddressResolver.BuildResolvedAddressEntry(AddressCategory category, BusinessEntity businessEntity, Guid& objectId, Boolean active, String emailAddressMatched) ilOffset = 0x58
at AddressResolver.GetPrunedList(BusinessEntityCollection responseCollection, AddressCategory category, Hashtable removeDuplicateFilter) ilOffset = 0x6B
at AddressResolver.DoResolve(AddressEntry[] addressEntriesToResolve, Int32[] objectTypes, Boolean matchPartialEmailAddresses) ilOffset = 0x70
at AddressManager.ResolveEmailAddressInternalHelper(String emailAddresses, Int32[] objectTypeCodes) ilOffset = 0x1F
at CommunicationActivityServiceBase.ResolveUnresolvedParties(BusinessEntityCollection parties, Int32[] objectTypes, ExecutionContext context) ilOffset = 0x5C
at AppointmentService.Book(BusinessEntity entity, ExecutionContext context) ilOffset = 0x3D
at RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) ilOffset = 0xFFFFFFFF
at RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) ilOffset = 0x25
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) ilOffset = 0xCF
at LogicalMethodInfo.Invoke(Object target, Object[] values) ilOffset = 0x4F
at InternalOperationPlugin.Execute(IServiceProvider serviceProvider) ilOffset = 0x57
at V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context) ilOffset = 0x200
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x6C
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode,
ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion) ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId, OrganizationContext context, Boolean
returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at OrganizationSdkService.Execute(OrganizationRequest request) ilOffset = 0xD
at   ilOffset = 0xFFFFFFFF
at SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) ilOffset = 0x241
at DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) ilOffset = 0x100
at ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) ilOffset = 0x48
at MessageRpc.Process(Boolean isOperationContextSet) ilOffset = 0x62
at Wrapper.Resume(Boolean& alreadyResumedNoLock) ilOffset = 0x1B
at ThreadBehavior.SynchronizationContextStartCallback(Object state) ilOffset = 0x0
at ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x70
at ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x4
at QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() ilOffset = 0x0
at ThreadPoolWorkQueue.Dispatch() ilOffset = 0xA3
>Crm Exception: Message: SecLib::RetrievePrivilegeForUser failed - no roles are assigned to user. Returned hr = -2147209463, User: ed2ef8c8-69db-e311-9816-0019990163cf, ErrorCode: -2147209463
[2015-03-05 09:20:34.572] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread:   28 |Category: Platform.Sdk |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | VersionedPluginProxyStepBase.Execute
ilOffset = 0x65
>Web Service Plug-in failed in SdkMessageProcessingStepId: {E4C9BB1B-EA3E-DB11-86A7-000A3A5473E8}; EntityName: appointment; Stage: 30; MessageName: Book; AssemblyName: Microsoft.Crm.Extensibility.InternalOperationPlugin, Microsoft.Crm.ObjectModel, Version=6.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35; ClassName: Microsoft.Crm.Extensibility.InternalOperationPlugin; Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
   at Microsoft.Crm.Extensibility.InternalOperationPlugin.Execute(IServiceProvider serviceProvider)
   at Microsoft.Crm.Extensibility.V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context)
   at Microsoft.Crm.Extensibility.VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context)
Inner Exception: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
   at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
   at System.Globalization.CultureInfo..ctor(Int32 culture)
   at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
   at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
[2015-03-05 09:20:34.579] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread:   28 |Category: Exception |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | CrmException..ctor
ilOffset = 0x7
at CrmException..ctor(String message, Exception innerException, Int32 errorCode, Boolean isFlowControlException) ilOffset = 0x7
at CrmException..ctor(Exception innerException, Int32 errorCode, Object[] arguments) ilOffset = 0xB
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x6C
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode,
ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion) ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId, OrganizationContext context, Boolean
returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at OrganizationSdkService.Execute(OrganizationRequest request) ilOffset = 0xD
at   ilOffset = 0xFFFFFFFF
at SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) ilOffset = 0x241
at DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) ilOffset = 0x100
at ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) ilOffset = 0x48
at MessageRpc.Process(Boolean isOperationContextSet) ilOffset = 0x62
at Wrapper.Resume(Boolean& alreadyResumedNoLock) ilOffset = 0x1B
at ThreadBehavior.SynchronizationContextStartCallback(Object state) ilOffset = 0x0
at ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x70
at ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x4
at QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() ilOffset = 0x0
at ThreadPoolWorkQueue.Dispatch() ilOffset = 0xA3
>Crm Exception: Message: An unexpected error occurred., ErrorCode: -2147220970, InnerException: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
   at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
   at System.Globalization.CultureInfo..ctor(Int32 culture)
   at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
   at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
[2015-03-05 09:20:34.580] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread:   28 |Category: Platform |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | MessageProcessor.Execute
ilOffset = 0x1C5
>MessageProcessor fail to process message 'Book' for 'appointment'.
[2015-03-05 09:20:34.581] Process: w3wp |Organization:00000000-0000-0000-0000-000000000000 |Thread:   28 |Category: Platform |User: 00000000-0000-0000-0000-000000000000 |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | ExceptionConverter.ConvertToFault
ilOffset = 0x69
>UNEXPECTED: no fault?
[2015-03-05 09:20:34.582] Process: w3wp |Organization:00000000-0000-0000-0000-000000000000 |Thread:   28 |Category: Platform |User: 00000000-0000-0000-0000-000000000000 |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | ExceptionConverter.ConvertMessageAndErrorCode
ilOffset = 0x23B
>System.Globalization.CultureNotFoundException: Microsoft Dynamics CRM has experienced an error. Reference number for administrators or support: #895E889A: System.Globalization.CultureNotFoundException: Culture is not supported.
>Parameter name: culture
>0 (0x0000) is an invalid culture identifier.
>   at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
>   at System.Globalization.CultureInfo..ctor(Int32 culture)
>   at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
>   at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
/////END ERROR//////////////////////////////////////////////////////////////////////////////////////////
And then the
date of the duplicates in the calendar
in Outlook and CRM.
My version CRM 2013 -
6.1.2.112
Crm2013wasthemigratedfromthe
2011 version.
Does anyone have any idea how to
solve it.

I checked it, these errors
occur on all users. Below
the main errors that occur.
Crm Exception: Message: SecLib::RetrievePrivilegeForUser failed - no roles are assigned to user. Returned hr = -2147209463, User: ed2ef8c8-69db-e311-9816-0019990163cf, ErrorCode: -2147209463
Web Service Plug-in failed in SdkMessageProcessingStepId: {E4C9BB1B-EA3E-DB11-86A7-000A3A5473E8}; EntityName: appointment; Stage: 30; MessageName: Book; AssemblyName: Microsoft.Crm.Extensibility.InternalOperationPlugin, Microsoft.Crm.ObjectModel, Version=6.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35; ClassName: Microsoft.Crm.Extensibility.InternalOperationPlugin; Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
Inner Exception: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
Crm Exception: Message: An unexpected error occurred., ErrorCode: -2147220970, InnerException: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
MessageProcessor fail to process message 'Book' for 'appointment'.
System.Globalization.CultureNotFoundException: Microsoft Dynamics CRM has experienced an error. Reference number for administrators or support: #895E889A: System.Globalization.CultureNotFoundException: Culture is not supported.
>Parameter name: culture
>0 (0x0000) is an invalid culture identifier.

Gettin a portal runtime error when adding iviews in web page composer

we are getting the Following error when we try to add a iview in page builder .we have done the configurations as per the documentation ((http://help.sap.com/saphelp_nw70/helpdata/en/45/3fe7b4f34d4a18e10000000a114a6b/frameset.htm).and will appreciate any help on this issue .
Portal Runtime Error
An exception occurred while processing your request
Exception id: 08:09_31/10/07_0015_15308650
See the details for the exception ID in the log file.
#1.5 #00145ECC9C67007E000000190000117800043DC0D68F6E39#1193798349688#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#myadmin#5872##myportalci.keells_JPP_15308650#myadmin#015ef900875a11dc8a3700145ecc9c67#Thread[PRT-Async 2,5,PRT-Async]##0#0#Error##Java###08:09_31/10/07_0015_15308650
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Can&\#39;t read the prameter &\#39;siteString&\#39; from the PCD.
     at com.sapportals.portal.httpconnectivity.urliviews.runtime.URLIView.checkPCDVal(URLIView.java:631)
     at com.sapportals.portal.httpconnectivity.urliviews.runtime.URLIView.readFromPCD(URLIView.java:528)
     at com.sapportals.portal.httpconnectivity.urliviews.runtime.URLIView.doContent(URLIView.java:326)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:149)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:355)
     at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:310)
     at com.sap.nw.wpc.runtime.AbstractContainerComponent.doContent(AbstractContainerComponent.java:88)
     at com.sap.nw.wpc.runtime.ContainerComponent.doDesign(ContainerComponent.java:183)
     at sun.reflect.GeneratedMethodAccessor362.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:134)
     at com.sapportals.portal.prt.component.CachablePortalComponent.service(CachablePortalComponent.java:273)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:375)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:388)
     at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
     at java.lang.Thread.run(Thread.java:534)

Dear Prabash Balsuriya,
I got similar issue while adding iView to WPC during public, can you elaborate how you solve this issue?
Thanks.
Regards,
Weng

Bridge has error when adding additional keywords to InDesign snippet IDMS files

I have recently created a whole library of InDesign Snippets. I opened Bridge to add keywords to these files. I can add the first keyword with no problem, but when I try to add a second keyword, I get this error: "There was an error writing metadata to <filename.idms>"
Some interesting observations:
I use a list of keywords and subkeywords in Bridge so all I have to do is check the corresponding keyword checkbox. With every IDMS file, I can check only *ONE* keyword. I will get an error when I attempt to check a second keyword.
If I re-export the IDMS from InDesign, it will overwrite the metadata, and I am once again allowed to add one checkbox before getting the error.
If I take a clean IDMS file (no keyword metadata already added), I can Rt+Click on the IDMS icon in Bridge and pull up File Info and under the Keywords section, I can type in multiple keywords separated by commas and save. This IDMS file will then show checked boxes next to all of the keywords I had manually added. At this point, if I try to add more keywords (either by clicking the checkbox or by going to Rt+Click->File Info), I will get the "There was an error writing metadata to <filename.idms>" error.
I've seen other posts about image files having an issue not allowing any metadata to be written at all... this problem is slightly different in that I do not have any problem adding that first keyword. But something is happening after the metadata is saved with that first keyword that does not allow me to add additional keywords.
Thanks for anyone and everyone's help on this most perplexing problem.
~ Mindy Allen
Adobe Bridge CC 6.1.0.116 x64
Adobe InDesign CC 2014.1 Release -- 10.1.0.70 x 64
Dell Precision T3600 running Windows 7 Professional

can anyone adivce on my question please ?

I/O error when adding quorum device

Similar Messages

Maybe you are looking for