I open I file and do not open and close the app

I have a power point file I open in my Ipad, and when I try it the app closes as its loading, no display error or message,
Is there a maximum file size to open in Ipad?

I don't think there is an "official" maximum file size to be able to use on the iPad, but I can tell you from personal experience that Excel files that are 6 or 7 MB in size have crashed my iPad original version. If all other PowerPoint files have opened successfully for you, the file may be too large - or the file could be corrupt as well.

Similar Messages

  • Music spontaneously starts, stops, stutters at random and I'm not even using that app. Repeated attempts to pause the song and close the app have no affect. Just keeps popping on and off randomly no matter what I'm doing at the time.

    How do I eliminate this glitch?  Music spontaneously starts, stops, stutters at random and I'm not even using that app. Repeated attempts to pause the song and close the app have no affect. Just keeps popping on and off randomly no matter what I'm doing at the time. I tried double-clicking the Home button which brings up all of the active apps, touched and held the Music icon until all the icons started wiggling, tapped the Close icon in the upper left corner of the Music app to close the app completely, but the app is still open and still randomly stuttering. I did notice that the play button icon flashes in the upper right corner of the screen when this happens and it appears and disappears in concurrence with the Music app stuttering. When the music starts, the icon appears and when it stops, the icon disappears again. When the music stutters on and off, the icon appears and disappears rapidly and in sync with that random glitch. This just started today for no apparent reason. I turned the iPad off, waited 30 seconds and turned it back on. As soon as it was finished starting up, the same music glitch began again immediately. I'm using iOS 6.1.3.

    Well, no one seems to have any answers or ideas for me, I'll update what I've been able to accomplish.
    I reloaded all 14 disks in the time frame of watching Lord of the Rings on Fri. nite.
    Funny thing is, the first disk pulled the info from the online store! Hooray!
    Wait-then all the next 13 could find no information online...what the heck is up with that? So I MANUALLY assign each disk a new track # to co-inside with each disk, spent about 2 hours doing that.
    But still, itunes tells me my playlist is too large, there's not enough space on the ipod. so I unchecked 1 1/2 disks (I'd listen to 1/2 of disk 1 previously) and voila! there's my ipod full of my book. Finally. But what a lot of bother just to keep things in order!

  • I can't close the Numbers spreadsheet anymore, nor navigate on it. I can open and close the App Numbers though. What can I do?

    Hi! I was playing around with my iPad and was opening and closing different Apps. Suddently the file I opened in Numbers got stuck. I can't navigate on it anymore, neither can I go back to the other Numbers files.
    Could you please advise, what I can do here.
    Thanks!

    Quit Numbers completely and restart the iPad.
    Go to the home screen first by tapping the home button. Quit Numbers by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on the Numbers icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Then try Numbers again.

  • HT4061 a app find my friends has come up on my screen and i cannot open or close the app

    my screen has frozen up have a app find you friend that has popped up but it willnot let me open or close the apple

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • How to Print a PDF file and Close the ACrobat Reader opened using WEBUTIL

    Hi All,
    I have used WEBUTIL successfully and printed files using webutil_host.nonblocking builtin. What happens is that after printing the file the Acrobat reader stays on the desktop of the client PC. How to close that file opened programmatically. I am unable to close it using any any commands or using following builtins from WEBUTIL.
      WEBUTIL_HOST.RELEASE_PROCESS(PROCESS_ID)
      WEBUTIL_HOST.TERMINATE_PROCESS(PROCESS_ID);My command to directly call the Acrobat reader file and print it is by using this command.
      M_STR_COMMAND    := 'cmd.exe /c start AcroRd32.exe /t '||CHR(34)||FILE_STR_PATH||'\'||FILE_NAME||CHR(34)||' '||CHR(34)||PRINTER_NAME||CHR(34);Help in this regard is much appreciated.
    Thanks in advance

    I think if you use the start-command, the execution is asynchronously and you won't get the correct process-id. Try to execute Acorbat directly without the cmd /c start in front of it.

  • Sharing an editable file and sending the app to the publisher

    Hello. I am a little confused about some parts of working with apps in dps. We are two persons working together, and therefore, of course, we would like to share the apps we create. But from InDesign it seems that the files can only go one way, and that is up in the cloud. I found out that I can download the .folio (even though it is very cryptic to do so) from Folio Producer, but I cannot download anything editable, which will be necessary if we are to collaborate between more computers. In addition, it would be very convenient to be able to share a file in the process of making it, before I upload it, select icon pictures etc. and press that blue publish button. This is a very time-consuming process.
    Also we would like to send the apps to the publishers that we are working for, so they can upload them with their Apple account, not ours. We do not want to pay monthly for their books. If we send the .folio file (the one I got by pressing publish in Folio Producer and then export) to them, would they be able to publish the app by uploading it to Apple?
    I should mention that I am only using the free version of Creative Cloud. I don't know if this has any limitations relevant for these problems. I know that I can pay extra to be able to share in the cloud, but that does not change the fact, I think, that you cannot edit the files that you download. I am not even able to edit my own files uploaded and downloaded with the same computer and the same account.
    Thank you in advance.

    Can you explain how you currently collaborate when designing a book that you can't do with DPS? You may just need some guidance on best practices with DPS. DPS has several built in collaboration features.
    You can create a folio and share it with another user. That user can contribute articles to your folio and view your content both on device and on the desktop.
    You can create a folio, builda single edition app, sign it with a developer certificate and another user can load it on their device for viewing.
    You can create Indesign files and share them with another user via dropbox or sneaker net. That other person can create folios with these files for no charge and view on device and desktop.
    Create a folio, publish it and share the web viewer URL with another user so they can view it in a browser.
    About the only collaboration mechanism DPS doesn't support is the generatio of a folio that can be emailed to another user for viewing.

  • DOS Window automaticly close after execute the batch file and start the App

    Hi, all. I have made a batch file. When I start the batch file, thet is getting open the DOS Window. But I want close the DOS Window after Start the Application, or make it hidden?
    It is possible?
    Thanks all:-)
    Nikolay

    Hi,my batch file is:
    java -cp File.jar Desktop
    I have tryaed with:
    javaw -cp File.jar Desktop , but it dosn�t close the DOS Window.
    Have I make anythink false?
    Thanks.
    Nikolay

  • Aperture keeps multiple duplicate images in the library file which do not show up in the app

    So, I recently had to merge two libraries which have some common images.  Although upon import Aperture asked me if I wanted to "Add or Merge" the libraries (I selected "merge", which wouldn't import duplicates), I wanted to confirm there were no duplicates in fact brought in.  I ran Duplicate Annihilator, which made a strange claim (about most photos, in fact): it showed a file as a duplicate which had no copies that I could find - searching for it by name revealed exactly one image.
    Curious, I searched inside the actual photo library.  Imagine my surprise when I found the following files
    ...Library/Masters/2007/Aug 10, 2007/IMG_0002/IMG_0002.JPG
    ...Library/Masters/2007/Aug 10, 2007/IMG_0002 (1)/IMG_0002.JPG
    ...Library/Masters/2007/Aug 10, 2007/IMG_0002/IMG_0002.JPG
    which are in fact *exactly* the same image.  Meanwhile, to reiterate, Aperture shows only ONE photo:
    IMG_0002.JPG
    Shocked, I investigated further.  In fact almost every single file which was in common between both libraries was "imported but not displayed", which explains why my two libraries of sizes 50GB + 50GB after merger = 100GB when, the two libraries in terms of images had 10k + 12k after merger = 14k images.
    Aperture imported all the photos into the new library.  But it just opted not to use half of them.
    So, now I have a bloated-by-2x library, and of course the frustration with Aperture having made such an insane, bone-headed move.  Those files are essentially dead weight which will follow the library around for all eternity.
    1) Why?
    2) How to fix?
    thanks!

    I would take  a step back here before going further.  William's suggestion might very well clean up the library but something obviously did not go right and to start mucking about in the library might make things worst.
    For starters I'm surprised to see the folder structure you showed in your first post. Aperture stores managed masters (originals) by import date and time. The structure (in all libraries I've ever seen) looks like:
    So something seems wrong with your master folder.
    Also the three folders you showed the first and third are identical ( the middle one has the (1) added to which is how the OS handles duplicates in a folder) so this shouldn't even be possible, those folders should not be there.
    I'm wondering if this is something left over from your using Duplicate Annihlator. Do you have a copy of the library before you ran the merge and used DA on it? Would be interested to see what the master folder looks like.
    Finally when you ran the merge which library did you tell Aperture to use as the master, the one that was used to resolve conflicts?
    Again William's suggestion might be all you need to do but it would be good to figure out want went wrong before proceeding.
    regards
    Message was edited by: Frank Caggiano - A better first step might be to run the Aperture first aid tools, repairing and possibly rebuilding the library.

  • My Ipad Air will not let me close the app i cant go to multi task either and the only thing on screen that changes is the date time and whether i have silent ringer or not, i also cannot access the control bar. Help would be much appreciated

    My Ipad aint working, i have tried everything

    Try this. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.

  • My ipod touch wont charge and it will only heat up and it charges only once in a while and after that the batery drains very fast even when i put it on airplane mode and close the apps once im done with them please help

    When i plug in my ipod to the comp it wont charge even if i keep it plugged in for an hour but it heats up like crazy i have also got the temperature warning once , it charges only once in a while and and my ipod nano works fine when i plug it into my comp so please help

    Try here:
    iPod touch: Hardware troubleshooting
    However, from yur symptoms Isuspect a hardware probblem like a dead battery.  An appointment at the Genius Bar of an Apple store might be in order.

  • I´m trying to open an excel file in numbers not being successful. The error msg is unexpectedly error using plugin SFCompatibility can you help me?

    I´m trying to open an excel file in numbers not being successful. The error msg is unexpectedly error using plugin SFCompatibility can you help me? Already changed the extension of the excel document to xlsx an now gives an unknown import error.

    In Excel have you tried saving directly to xls (not xlsx) and opening the xls in Numbers?
    If you have a complicated workbook in Excel that uses lots of Excel's advanced features, Numbers may not be able to handle the import.  It does pretty well on basic things, though.
    If you're just trying to get data into Numbers, then often copy-paste from Excel is easier than trying to open xls files.
    SG

  • I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4.  I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.

    I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4.  I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.

    Thank you - that all makes sense. It is, indeed, exactly what I did when I upgraded.
    I'm also writing this on the machine that crashed a few minutes ago (I posted the crash in another thread). I got back with a 'safe boot' - as I have done a few times before.
    I've also de-installed little snitch (and then done a safe-boot & then re-boot ) since that seemed involved. I de-installed Adobe flash, since that seemed to be a problem - I then re-installed the later, apparently fixed, flash. The most recent crashes don't seeme to have a problem with flash any more.
    I've posted the various ( generally different ) crashes. I also posted a summary of the similar lines that turn up in most of the crashes.
    Unfortuantely, I'm actually trying to use the machine to meet some urgent deadlines and all this is not making it at all easy.
    I had had great hopes for 10.7.2 - I thought that the crashes must be pretty common, so would have a common aetiology. There do seem to have been some fundamental changes to the file sytem and to the video interface (that seems to cause problems to brand new iMacs as well as to my 2009 iMac).

  • I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection.  Any ideas?

    I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection.  Any ideas?

    Many Thanks, Kurt.
    I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
    I shall save it somewhere VERY safe now in case this happens again …
    You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
    Best wishes
    OllyanDinah

  • When i try download a file from the internet it looks like its downloading then when i go to open this file it opens up in the app text edit and says it cannot open i DOS mode? Can anyne help?

    when i try to download a file from the internet it starts to download but when its finished it opens up in the app "text edit" and it says this file cannot open in DOS mode.
    Can anyone help?

    It sounds like perhaps the file doesn't have an extension that the system recognizes. Is this all files, or just one specific one, and if so, which? What is the name (and extension, if it has one) of the downloaded file? What kind of file do you *expect* it to be? (PDF, or whatever). Renaming a file with the appropriate extension can often fix that kind of problem.
    Matt

  • How can i open a DOC or TXT file and insert the data into table?

    How can i open a DOC or TXT file and insert the data into table?
    I have a doc file . the doc include some columns and some rows.(for example 'ID,Name,Date,...').
    I'd like open DOC file and I'd like insert them into the table with same columns.
    Thanks.

    Use the SQL*Loader utility or the UTL_FILE package.

Maybe you are looking for

  • Change icon of a filetype

    I was wondering if there was a way to assign an icon to a specific file-type without installing anything. As en example I have an icon for *.rar files, how would I go about having all *.rar files I come across use that icon without setting them indiv

  • Issue in BAPI_ACC_DOCUMENT_POST

    Dear Sapgurus, in se37 with bapi with test values i am going execute In document Header BUS_ACT RFBU,USERNAME  *****,COMP_CODE 1001,DOC_DATE 25.03.2010,PSTNG_DATE 25.03.2010,FISC_YEAR2009, FIS_PERIOD 00,DOC_TYPE KV, In Account G/L TabITEMNO_ACC  0000

  • I forgot my restriction number. Is there any possibility to get in the programm?

    I forgot my restriction number! Is there any possibility to get in the program?

  • Colour Pearl w/o Software Disc

    *I'm trying to get colour pearl for my 8100 because my trackball appears to be a little discolored & its really ugly. *I DO NOT have the software disc for my BB. *Can someone help me out by telling me what software I need to download of the BB websit

  • Just upgraded to 4.0, images are washed out.

    Images and text are not clear