I open my MacBook Pro lid, the screen comes on momentarily, then goes dark, and I can't do anything

OS X  10.6..08
MacBookPro6.2
I never reboot.  I have a lot of windoes open.  Every week or two I'll open the lid to get to work and the display comes on then goes off and I can't do anything.  The keyboard backlight is on.  If I close the lid the white pilot light on the front right edge is on.  I have not been able to guess a key combination to get it back.  The only thing I found is to press and hold the power key to force a reboot.  When it comes back up it usually sends a trouble report. 

MikeGMIT wrote:
The report is incomprehensible.  Is it saved somewhere?  If so I can grab it and post it here. 
Inside your Utilites you will see the Console.app.  Click on it.  Reports will be there.
Yes I have tried a short press of the power button.  I've opened and closed and done short presses and waited several minutes for something to happen afer each action.   
Since I can't see the screen I can't close/quit applications. 
It opens closes, sleeps wakes just fine several times a day, and for days in a row.  Then one day it exhibits this bad behavior. 
Thanks for asking some questions and offering suggestions!!

Similar Messages

  • HT201177 My Macbook pro: After sleeping, the screen comes on momentarily then blacks out.  When I close the lid and reopen it the same thing happens.  The screen only does this after waking up from sleeping.  Help, thanks!

    Macbook Pro:
    When I raise the lid after sleeping, the screen comes on momentarily then backs out.  If I close the lid and raise it again, the same thing happens.  It is sometimes necessary to force quit.  Once restarted, there is no problem unless the lid is closed for a short time and the machinge goes to sleep.
    Help! Hesperia fire captain

    Hi ...
    Try Resetting the System Management Controller (SMC)

  • When I open my MacBook Pro for the first time each day, I find condensation on the glass.  What can I do to prevent the condensation?

    When I open my MacBook Pro for the first time each day, I find condensation on the glass.  What can I do to prevent the condensation?

    This thread and all the followups are hilarious, if it weren't such a serious problem. OP, you may want to add a bit more information on how this drippy screen problem occurs: where do you live, what are the weather conditions, what are you doing with the Mac when it occurs, etc.
    Yes, extreme moisture, to the extent of causing visible condensation, is Very Bad News for any electronic device, and more so with one that isn't tropicalized like the Mac. Besides trying to avoid subjecting it to such extreme temperature changes, using some kind of desiccant to absorb close range moisture and avoidint its use until it dried out, I can suggest placing some kind of absorbent material between the display and the keyboard to prevent the moisture on the glass from finding its way into the computer. Like the protective poliethylene foam protector that came with the Mac when new. Or something like RadTech's ScreenSavrz: http://www.radtech.us/Products/NotebookScreenSavrz.aspx

  • I've recently received an error message from Time Machine that my Macbook Pro's sparsebundle is in use.  What is this and what can I do about it?

    I've recently received an error message from Time Machine that my Macbook Pro's sparsebundle is in use.  What is this and what can I do about it?

    This is asked at least 5-6 times a day here.
    Look at the right hand column.. more like this.
    It is a bug in Mountain Lion.
    Read C12 http://pondini.org/TM/Troubleshooting.html
    But the fast solution.. unplug the TC.. count to 10.. plug it back in.

  • Trying to use a new, larger external hard drive for my Time Machine backup.  However, every time I start the backup, it gets started then fails.  And, I can't delete the few files that did save on the external.  Sort of a catch 22.  Any ideas?

    Trying to use a new, larger external hard drive for my Time Machine backup.  However, every time I start the backup, it gets started then fails.  And, I can't delete the few files that did save on the external.  Sort of a catch 22.  Any ideas?

    Is it a USB hard drive?  USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice.  Double check your profiler to make sure that is not a problem.  If it is Firewire, make sure there aren't other firewire devices in use at the same time.  I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

  • When im logged in on my phone and try to purchase any app, it does the loading spinning circle and then stops. And i can't download anything. Why is this?

    Help
    When im logged in on my phone and try to purchase any app, it does the loading spinning circle and then stops. And i can't download anything. Why is this?

    Hi ..
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, check restrictions.   Settings > General > Restrictions

  • What is the cracking sound when I open my MacBook Pro lid?

    When opening and closing MacBook Pro lid, it makes a cracking sound. Does anyone have an idea what it could be? It's not the hard drive because Geek Squad ran a test and everything passed.

    Try this:  Loosen the screws in the rear of the MBP (by the hinge) and re-torque them.  See if that will alleviate the problem. You will need a 00 Philips driver.
    Ciao.

  • My MacBook Pro does not recognize my Android Incredible 2 cell phone and I can not transfer my photos from my cell phoen to my Mac. I was able to do this in the past, but can no longer do so. i havenot upgraded to any new software.

    My MacBook Pro does not recognize my Android Incrdible 2 cell phone and therefore I can not transfer any photos from my cell phone to my Mac. I was able to do this in the past, but can not do so now. I have not upgraded to any new software. My USB cable is plugged in properly and I just get an error message -- "No Android Device Found". What could be the problem?

    I had the same issue with the Galaxy S4 trying to see what the hype was about and was my first and last android phone. With that being said unfortunately it is a hit or miss with the Mac recognizing an android device or not.  It worked perfectly fine the first time around and then it stopped working for no apparent reason. Through trial and error nothing I did solved the issue.   I did however plug it in my Mac and left it connected for about 30-40 min to charge for a bit and all of the sudden it recognizes the phone. So I just launched Android File Transfer and everything else became fluid after that.    I have no explanation as to why it happened that way, but what I gathered from this is maybe you just have to let it sit for a minute while plugged in before the Mac recognizes it, after all they are opposing software.  On a side note this is why I will always be an apple user, Iphones and the like never have this problem

  • How to make Internet commerce with the MacBook Pro in the program iWeb. I've made since and would like to make it possible to pick the next act with debit cards. Is there anyone who can help?

    How do I make Internet commerce with the MacBook Pro in the program iWeb. I've made the website and would like to ad a site where it possible to commerce with debit cards. Is there anyone who can help?

    Some info on this and the following two pages...
    http://www.iwebformusicians.com/Internet-Music-Sell-Distribute/Website-Buy-Page. html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • The sign in to icloud keeps coming in and i can not do anything even i put my password

    in my i pad sudenly the sign in to icloud start to pop in to my screen, and i can not do anything even i am writing my password

    Hi licaas,
    If you are having issues with your iPad continuing to ask for your iCloud password you may want to try a couple of things to troubleshoot.
    First, I would try restarting the iPad -
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/HT1430
    If the issue is still present, you may want to restore the iPad as a new device -
    iOS: How to back up your data and set up your device as a new device
    http://support.apple.com/kb/HT4137
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Mid Macbook Pro 2010 - The screen lid it quite hard to open

    Hello,
    I bought my macbook pro in August 2010 was my first ever mac purchase however, since I have had it I always find it requires quite a lot of force to open the lid. But when I was in the Apple Store the Macbook Pro's screen lids were easily opened with very little force, I was wondering if this is a defect? Or I could fix the problem, or it might be best to go to the Genius Bar?

    You are under warranty. Stop by the Apple store and show the genius your problem.

  • HT203254 When I Turn My Macbook Pro On The Screen Dosen't Work

    My Macbook Pro Has A Nvidia Geforce GPU And The Screen Won't Work When I Turn It On

    Welcome to Apple Support Communities
    When you turn on the computer, does it start properly? Do you hear the startup chime and everything else? If so, there may be a display or GPU problem. First, reset the SMC > http://support.apple.com/kb/HT3964
    If you have an external display, connect it to your computer and see if it works. If not, it's a GPU issue. If it works, it's a display issue. In both cases, I recommend you to take it to an Apple Store or reseller

  • How to fix MacBook Pro when the screen goes completely grey in start up?

    This problem has been since yesterday and I need help ASAP please! But my MacBook didn't start up after it had died so I had to power it up with the power button. The problem is the screen with the apple logo emerged with the loading circle but the screen was red! I don't know what that means, but after the screen moves on, it goes to a completely grey screen and doesn't go any futhure. Any help would be greatly appreciated! I saw that it may be because of a faulty wire which my I have been using a USB wire to recharge my phone that might be the reason, but the computer continues to freeze and has troubles starting up. Please HELP!!!!

    See >  http://support.apple.com/kb/TS2570
    Also see >  When I start up my Mac book a grey screen appears

  • My messages aren't showing. I open up my messages but the screen is blank an then closes itself.

    I sent my friend about 120 pictures through iMessage but when I went to open up another text my messages aren't showing. The screen is completely blank and then the app shuts itself down. Do I need to reset my phone in order to get my messages to show?

    See this Apple note on booting and video issues.

  • MacBook Pro OS X 10.6.8   I reloaded Snow Leopard and now can not find iPhoto.  Can I retrieve the pictures from the system?

    ProtectMac AV alerted to a trojan and was unable to remove it.  The Geeks at Best Buy could not sort it and recommended reinstalling the OS so I off-loaded the files and 1200 pics from Europe to a flash drive.  I reinstalled Snow Leopard, iWork, and upgraded from Office: Mac 08 to Office: Mac 2011.
    Once the system was proved up the files were reloaded but the flash drive failed before the pictures could be reloaded.  Is there a way to recover the pictures that were in iPhoto which is not here even with a search.  All I can find is:
    iLifeShared              Oct 23, 2010  5:16 PM              --      Folder
    Info.plist                   Oct 23, 2010  5:16 PM           4 kb    XML P...rty List
    iPhoto.ipspot            same date / time                    4 kb    iPhoto...ument
    iPhotoAux.db           same date / time                    4 kb     Document
    iPhotoMain.db                   same                             same
    Library.data                       same                             same
    Library.iPhoto                    same                             same
    Library6.iPhoto                  same                             same
    I could get into the registry on a widows machine safely but know nothing about a Mac.  I read up a bit on the Terminal and Commands but prefer to not be trolling around with the unknown.  Any idea where iPhoto went and why?  Thanks!  /joe

    When you backed up to the flash drive did you copy the iPhoto Library that was in the Pictures folder?  If you had copied it intact and then back you would have your library back.
    You can try using   MediaRECOVER or SubrosaSoft FileSalvage to try to recover what's on the flash drive.  Both will let you run it in demo mode to see if you can recover the photos before you have to purchase. 
    OT

Maybe you are looking for

  • Performing lookup in XI to access file stored in link provided in IDOC

    Hi All,           Can anyone please tell me if the below mentioned requirement is feasible and if yes how it can be done.    Requirement is to send eg - Work Order (Idoc type ORDER01) message to thirdparty via PI . The workorder send would have a url

  • Using Apple TV bought in the U.S. in England

    Any issues using Apple TV bought in the U.S. in England ?

  • Sound sputters ON my computer when I stream to AppleTV

    When I stream iTunes audio from my Macbook to my Apple TV and select "multiple speakers" (both the AppleTV and my Macbook's audio output), the Macbook audio constantly and frequently cuts in and out, like there's a bad connection or something. I unpl

  • Cash journaltransfer bal. from one cash journal to antoher cash journal ...

    As on 31st Dec 07, the cash on hand balance at other locations was Rs 37001 The break ups are Rs 2997- hyderabad                 Rs 4711- CAL Narayan                                       Rs 29293- Sonepath while migrating Data to ECC, the cash balan

  • CRM model nodes

    Hi I am new to weclient ui and i want to know how to use a model node. I have created a simple object in spro which is my ztable. so now, will i be able to acess the data in my ztable just by creating a model or do i need to any extra coding to get d