I opened and edited a pic from my Olympus camera onto my mac (not in iPhoto).  I zoomed in

I opened and edited a pic from my Olympus camera onto my mac (not in iPhoto).  I zoomed in and rotated the pictures and when I tried to click out of them, I got a message that the file was locked because I hadn't used it recently and "If you want to make changes to this document, click Unlock. To keep the file unchanged and work with a copy, click Duplicate."  I clicked "unlock" and then another message came up with the options of OK, Cancel, or Revert.  If I hit OK, I couldn't go back to my original picture.  I clicked OK. 
Then later I tried to open the picture in iPhoto and it doesn't recognize it, even though it is still a JPEG file.  It still shows on my camera, but shows as a bland square in iPhoto.  Have I lost the ability to open it in iPhoto?  Will I be able to go to a store and print it out from my camera?

No one can answer that since you only provide problems and questions
we need to know exactly what you have, what you did and what happened including exact error messages
I opened and edited a pic from my Olympus camera onto my mac (not in iPhoto).  I zoomed in and rotated the pictures and when I tried to click out of them, I got a message that the file was locked because I hadn't used it recently and "If you want to make changes to this document, click Unlock. To keep the file unchanged and work with a copy, click Duplicate."  I clicked "unlock" and then another message came up with the options of OK, Cancel, or Revert.  If I hit OK, I couldn't go back to my original picture.  I clicked OK.
What software did you use and exactly what did you do and what exactly was the  error message? There is a good chance that you will need help for the support for the program you used. Where was the photos you were editing not using iPHoto?
Then later I tried to open the picture in iPhoto and it doesn't recognize it, even though it is still a JPEG file.  It still shows on my camera, but shows as a bland square in iPhoto.  Have I lost the ability to open it in iPhoto?  Will I be able to go to a store and print it out from my camera?
What version of iPhoto  Had you imported the photo into iPhoto - iPhoto is not a photo viewer and can not open photos that have not been imported
as to how your camera and the store work - those are qestions for them -
LN

Similar Messages

  • I use a mac pro and have photos saved in Iphoto.  I have burned a disk and want to send to a friend who is a PC user and only has picassa.  Will she be able to open and edit the photos in picassa?

    I have saved photos in Iphoto and have burned them to a disk.  I want to send the disk to a friend who is a PC user and doesn't have IPhoto.  She has Picassa.  Will she be able to open and edit the photos from my disk on her PC in Picassa?

    Thanks.  That's a great relief.  Do you know if the photos will be correctly formated or will they change in Picassa?

  • Open and edit animated .gif while preserving frame timing

    CS4 Premium Design Edition, Win XP
    I was disappointed with the removal of Image Ready from CS3 because although some of the functionality was placed into Photoshop 10, there was no way to open and edit an existing animated .gif while preserving the timing of each individual frame. I was told on the PS forum at the time that I really needed to use Fireworks. I resented that, because I was very happy with Image Ready and I didn't want to have to learn a new application just to gain functionality that had been included in previous versions of PS/IM.
    I've now got CS4 Premium Design Edition which of course includs Fireworks... and here's what Help has to say on the subject of imported .gifs.
    "Note: When you import an animated GIF, the state delay setting defaults to 0.07 seconds. If necessary, use the States panel to restore the original timing."
    This is no use to me. What if I don't know the individual frame timings? What if there are 200 frames with varying timings?
    Simple question: which current Adobe product is capable of importing a .gif while retaining the frame timings? If anyone knows, or if I've misunderstood the nature of the Fireworks Help quote above, I'd really appreciate some input here. Thanks :)
    Not so simple question: why was an excellent gif-editing application thrown out to have its functionality partially replaced by a bunch of scripts and half-effective workarounds cooked up by desperate users ("import a gif by using the video import and typing *.* into the filename box..")? It's a fair question I think.
    Mark

    Hi Bob, that's not glib at all, it's a reasonable question.
    I uninstalled it along with everything else when I installed CS3, in the reasonable expectation that whatever replaced IR would be at least equal in functionality.
    Perhaps I should just dig out CS2 and install IM from there, but I have some serious reservations about doing so, because I don't know if/how a partial install of CS2 will impact upon my installation of CS4, and I'm not confident of getting support.
    I am also curious to know if/why Adobe actually removed basic functionality without replicating or replacing it in their other software. I really want to know: which recent, currently supported Adobe product
    should I be using in order to regain this functionality? Or do Adobe no longer produce a geniuinely comprehensive .gif-editing application?
    Mark

  • How to open and edit a TopLink .mwp file?

    I can not open the toplink_mappings.mwp file using JDeveloper tool.
    How to open and edit a TopLink .mwp file?
    Thank you

    Hi,
    Use JDeveloper to import the mwp project .In Jdeveloper,File->Import->ToplinkWorkbench->Select the .mwp file and can work from JDeveloper in editing the tlmap.xml and session.xml.
    Regards,
    P.Vinay Kumar

  • Does iWork for iOS allow me to open and edit documents created in the Microsoft Office suite?

    Hi all,
    I have just purchased an iPad 2 32Gb. I want to be able to use it for work.
    I need to be able open and edit documents created in Microsoft Office. Primarily .doc and .docx files. Is this possible? or am I better with D2 or Documents to Go.
    Also, can I save a document attachment from an email and open it on my iPad for reviewing and editing?
    Cheers
    Mr Bunyip?

    Bunyip in a Mini wrote:
    I need to be able open and edit documents created in Microsoft Office. Primarily .doc and .docx files. Is this possible? ...
    Yes, "pages.app" will open these files. In the same manner "numbers.app" will open xls,xlsx and "keynote.app" will open powerpoint files.
    iwork09 files from a Mac can also be opened. And you can save each files back in various file formats, also save them  as pdf.
    Also, can I save a document attachment from an email and open it on my iPad for reviewing and editing?
    Yes. "open in .." then a suitable app is in the list : say you get a docx, then pages will be presented as app to open it.
    Cheers
    Mr Bunyip?
    Enjoy it.

  • How open and edit the coherence.xml file?

    How can I open and edit the coherence.xml file?
    I cannot find the coherence.xml file in the coherence.jar package.
    Thank you,
    June

    If you are intent on changing the coherence.xml file, then you could use the JAR command (that comes with Java) to extract the coherence.xml file from coherence.jar and the later repackage the coherence.jar file using the udpated coherence.xml file, e.g.:
    C:\java\opt\coherence-331\lib>jar -xvf coherence.jar tangosol-coherence.xmlextracted: tangosol-coherence.xml>
    Instead of using JAR, on Windows you can associate the .JAR, .WAR and .EAR extensions with WinZip and use it to access / modify the contents of JAR files.
    However, the suggested approach is as follows, and does not include any changes to the tangosol.jar file:
    The tangosol-coherence-override-dev.xml file can be found in the coherence.jar file. After editing this file (in this case to define a unique value for the port system-property value for the multicast listener), save the file and add it to the server's classpath. When the server is executed, the values in the tangosol-coherence-override-dev.xml file will override any corresponding settings in the tangosol-coherence.xml file.Peace,
    Cameron Purdy | Oracle Coherence

  • Open and edit a .car File via VBA?

    Post Author: andy30
    CA Forum: Other
    Hello,
    i want to open and edit and import a  *.car  File from an Excel Macro. Is that possible? I have the olap intelligence Add in for excel, but there a only functions to open dialog boxes (ui_wrappers).
    thank you for your help.
    Andy

    Photoshop reads and writes PSB files.

  • Is there a way to open and edit my iMovie HD files with iMovie '09 and later versions?

    I am getting ready to update an older iMac from Tiger to Mountain Lion. (Long overdue, I know) I have several files that I created using iMovie HD. After I update, will the new versions of iMovie be able to open and edit my iMovie HD files?

    I don't think that iMovie 11 is backwards compatible with iMovie HD 6.
    If you still have the install disks for iMovie Hd 6 (iLife 6) you can keep it alongside the newer version:
    Happily this is easily achieved, but it has to be done backwards.
    Delete iMovie 11 (just drag it to the trash). Now install iMovie 6 from the iLife 6 install disks. Update it to iMovie 6.0.3.
    Now re-install iMovie 11. This automatically moves iMovie 6 into a folder it creates in your Applications folder called iMovie Previous Version.
    Then reinstall iMovie 11.
    iMovie 6 works great with iDVD 7.
    Now you have them both, and you can have both in the Dock as well.
    Alternatively you could try this method, suggested by poster Uitech:
    Open a terminal and type "touch /Library/Preferences/com.apple.iLife011.plist"
    (No quotes)
    Install iMovieHD6 from the iLife 6 install disk.
    This works with both Leopard and Snow Leopard Macs.

  • Opening and editing a PDF in INDESIGN

    I am trying to edit a newsletter that was created by someone else using INDESIGN.  It is now a PDF.  I downloaded the free 30-day trial version of INDESIGN and cannot even open the PDF using said software.  Can someone please offer any suggestions or ideas on how I can open and edit this PDF?  Thanks.

    No can do...
    ID will Place a pdf, not edit it.
    There is a plug in, PDF2ID, might be cost justifiable if you are going to do this occasionally (Really bad idea, really bad)
    There is a widely known program which will open the pdf, widely frowned upon, strongly discouraged by all who represent Adobe...it is one of their flagship programs.
    Save the pdf as a Word file, Place the Word file, rebuild that file from scratch, tedious. ..

  • When will we be able to open and edit PDF documents in Indesign?

    Hi
    It would be nice if Indesign could open PDF files.
    When will this happen (without a plugin)?
    Today I need to open the files in Illustrator. The customer prefers to use Indesign, so even though Indesign can export pdf documents I will have to tell the customer and the program can not open pdf files. This I find really weird.
    Hopefully opening and editing pdf files in Indesign will happen real soon.
    Have a great day!

    Paal, I'm sorry for that little out-lash. There is nothing wrong with inquiring the feasability of a new feature. The problem is that PDF has been an "output intended format" from the very beginning.
    An Illustrator file (from a fairly modern version) also is a PDF file, for all intents and purposes. You can rename an .AI file to .PDF and use it anywhere, with any software that supports PDF (so that's excepting Apple's Preview, probably ;-) ). Moreover, you can still open and edit this PDF with Illustrator and get all of your objects, symbols, layers, paragraph styles, and guides back!
    That's because in fact this file *contains* all this extra information in a data block marked "For Private Use Only". Other software, if adhering to Adobe's PDF specs, will simply ignore this (and thus my little jab at Apple's Preview). Does that mean you can edit such a PDF with *any* software? No -- the Illustrator data is "proprietary", and the details are not published to use by other software developers. Similarly, one could envisage InDesign to do the same. Yes, it would lead to *huge* files -- but hey, you would be able to open THAT file into InDesign and edit it. But not with any other software!
    The meta-problem is that an extremely large amount of this private data would be *extremely* dependant on the software that was used to create it with. What would an Illustrator file do with InDesign's GREP styles? What would InDesign do with Illlustrator's brush styles, or symbols? Illustrator allows slanted guides, InDesign does not.
    And let's not focus purely on a combo of ID and Illy; Photoshop *also* outputs PDFs, and its graphic data has yet another set of requirements.
    So all of Adobe's software would need to be able to parse *every others' data* to some degree. Well, it's still not "unconceivable" as all of this would need to be done in one office (note that in that single office there are still vast differences in something as straightforward as a User Interface across the CS suite). But there are lots of other software developers out there, and they *all* want to write out PDFs, all with their own internal data! (Think of the different requirements between an architectural app and one for graph plotting.)
    A *possible* solution would be to add "more" metadata to a PDF without crossing into the realm of "every single bit". Article tagging is an example of this -- it tells software that wants to know in which order *plain text* is to appear, and as such it serves as meta-data for plain text content. But the mind reels thinking of what more to add -- a list of used GREP styles per paragraph would probably be useless to anyone else.
    But such an idea will not solve the problem, as 1. this meta-data is optional (lazy programmers would be allowed to say "nothing to see here, move along"), and 2. this data would only get added to *newly created* files, and it would not retroactively make older PDFs editable ...
    (Now that's just the *short* version :-) h

  • Can i open and edit nikon d810 raw files in lightroom 4.4

    can i open and edit nikon d810 raw files in lightroom 4.4

    No. Lightroom 4.x will never be able to open Raw files from the D810.
    D810 support has only just been added to the RC version of Camera Raw 8.6. It is never retrospectively added into older versions.
    Adobe Photoshop Camera Raw 8.6 RC for CC and CC 2014 Release Candidate | digital camera raw file support - Adobe Labs
    Adobe will probably add D810 support to the next version of Lightroom.
    Either way you'll have to upgrade to Lightroom 5 to be able to open D810 Raw files in Lightroom.

  • Opening and editing ppt files with keynote ios

    how do i get a powerpoint presentation on my computer to my ipad where i can open and edit it in keynote?
    should i use something like dropbox on the ipad to store the files and then open them from?

    Just email them to yourself.
    Of course you can also use dropbox or any other file transfer system which has ipad support.

  • Opening and editing CS3 versions

    Can the latest versions of Illustrator cc and Photoshop cc open and edit files created in the CS3 versions of the applications? I have the marketing department asking me for confirmation from Adobe as they are worried about all their existing material. I can't see why newer versions wouldn't be able to open and edit older versions, but since I am not a user of those apps I thought I would ask the question here.

    This forum is actually about the Cloud, not about using individual programs
    Once your program downloads and installs with no errors, you need the program forum
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
    http://forums.adobe.com/community/illustrator
    http://forums.adobe.com/community/photoshop

  • Any way to open and edit .MOD files on iMac?

    I am brand new to iMac, after wasting too many years on Windows. I have a Hard Disk camcorder that I uploaded from to my old PC. The movies are in the .MOD extension. I cannot seem to find a program to open and edit them on my new Mac. I used PowerDirector on my old PC, but that program doesn't seem to have a Mac version. Will iMovie be able to handle these files? I have quite a few home movies in this format, and I don't want to lose them! Thanks for your help!

    You can use a program called MPEG Streamclip to convert your MOD files to MP4s, which can be imported by iMovie. Also, you can change the mod file extensions to mpg which allows you to view the files with Quicktime (although, at least in my experience, they still need to be converted with MPEG Streamclip to be recognized by iMovie 08).

  • How can I open and edit files that were developed and published by ftp to my host on my old macbook, which I can no longer access.

    How can I open and edit files that were developed and published via ftp to my host on my old macbook, which I can no longer access. The HD containing the files cannot be accessed. I want to be able to download the published files to be edited in iweb?

    You CAN'T download published files and then edit them in iWeb because iWeb can't open them - it has no import facility so is unable to open any html or css files - a previously published site.
    You can download these files yes, but you'll need to use them as a guide or to cut and paste text from there whilst you re-build your site in iWeb.
    The only other way is to download the files and then open them with an html editor such as TextWrangler or use one of the other web design programmes out there that is capable of importing html and css such as Dreamweaver of Flux 4.
    These are your only alternatives as iWeb can't import and if you want to continue to use iWeb, then you'll have to re-build your site from scratch.  If you do just remember to back up your domain.sites file this time around - it is found under your User/Library/Applicaion Support/iWeb/domain.sites.

Maybe you are looking for