I pad 3 Disabled

my I pad is disabled after repeated wrong lock screen passcode ,how can I open it and keep my data  although of not having I tunes previously back up

Hi aziztrainer,
Thanks for visiting Apple Support Communities.
It sounds like your iPad is disabled after the wrong passcode was entered. If you have not backed up using iTunes, you may want to see if iCloud backup was enabled on your device by logging into www.icloud.com with your Apple ID. If you can log in, go to Settings and then click your iPad under My Devices to see the time of your last backup. For more information on iCloud backups, see this link:
iCloud: iCloud storage and backup overview
Additionally, here are the steps to recover your device after it has been disabled:
iOS: Forgot passcode or device disabled
If you enter the wrong passcode six times in a row, you'll be locked out and you'll see this message:
iPhone is disabled
iPad is disabled
iPod touch is disabled
If you can't remember your passcode, you'll need to erase your device using iTunes, Find My iPhone, or recovery mode. Then use a backup to put your data and settings back on your device. Here's how.
Best Regards,
Jeremy

Similar Messages

  • I got my i pad disabled bcoz i forgot the passcode on it how can i reopen it ?

    i got my i pad disabled  b coz i got passcode on it and i forgot it

    Connect iPad to iTunes put the iPad in DFU mode hold home and power button in for 10 sec after that let go of the power button hold the home button then on your pc  or Mac hold option on Mac or shft on pc and click restore when something pop ups on iTunes

  • HT4623 my i pad disabled after update what can i do

    help my i pad has disabled after updating and will not accept my passcode and will not sync with i tunes as i tunes wants the passcode which it will not accept

    Forgot password or device disabled
    http://support.apple.com/kb/ht1212

  • HP G72 Touch pad disable

    Hi, 
    I have a G72 laptop.
    When I first got it, the Synaptics Touch pad would automatically disable when I plugged in my USB mouse.
    What a great idea!
    I have just had to format and reinstall WIndows 7 home, from the supplied Recovery Partition.
    This was a nice, pain free procedure, except that my Touch Pad doesn't disable any more.
    I have looked most places I can think of and can't find any reference to it.
    Anyone know the  the Magic Incantation??
    Many thanks
    J
    This question was solved.
    View Solution.

    Hello again John822179,
    It may have been a feature that was not included in the driver you are currently running. You can remove that driver and reinstall the original driver that came with your computer by following the instructions I am providing below:
    Step 1. Click Start
    Step 2. Click Control Panel
    Step 3. Click on Device Manager
    Step 4. Click on Mice and other pointing devices
    Step 5. Right-click on your mouse driver and select Uninstall
    Step 6. Download and review the HP Support document: Using Recovery Manager to Restore Software and Drivers (Windows 7). Use it to reinstall your Trackpad drivers that originally came with your computer.
    This should give you the functionality you are looking for back. Again thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Track pad disabled. how to start computer now

    My track pad was damaged so the tech at Apple Store disabled it.  I went and purchased an Apple bluetooth mouse to use instead.  But when I turned my computer on, the screen is white and the fan is running nonstop.  What to do?  Not even able to attempt to use mouse.

    It seems there is a bigger issue than just the TrackPad not working... You need to take it to the apple store where a tech can look at the internals

  • X.25 PAD: Disable "Output X29 packet type 4" message

    Dear all,
    since quite a long time we are using a AS5300 IOS 12.3(17a) for ISDN X.25 dialin. New payment devices in the field have a software bug which passes q-bit messages transarently to the application instead of ignoring them. This causes errors because the X29 messages are not understood.
    Is it possible on the AS to disable the initial "Read X.3 Param" messages which is sent to the terminal?
    Or more generally: Disable all X.25 "q-bit messages"?
    Best regards,
    Bernhard Roth

    Use 'swap' option on 'translate x25' command.

  • Touch pad disable feature

    On the HP ENVY 4 Notebook PC There is a  feature which  disables and re-enables the touchpad by tapping twice in the top left-hand corner (where there is a small grey rectangle to indicate the position to tap to tun the touchpad off and on). What is the procedure for disabling this feature? (I find I often accidentally disable the touchpad accidentally and would rather the feature was switched off)
    This question was solved.
    View Solution.

    Hi,
    Open windows Control Panel and open Synaptics ( you can also access this via Mouse....Settings tab....Settings button ).  The option you need to disable is' 'Double tap to disable touchpad' - the exact location of this setting can vary depending on the Synaptics version you have and to some degree the hardware.  An example of its location in Synaptics 8.1 can be seen in the image below - just remove the highlighted check mark, click Close and then Click Apply.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT1212 my i pad is notstarting  shoing display i pad disabled

    my ipad is hanged due to wrong password by my kids how to restart my ipad

    Try the following:
    1. Restore:
    http://support.apple.com/kb/HT1414
    2. Recovery:
    http://support.apple.com/kb/HT1808

  • HT4623 I installed iOS 7 last night and when I started the i-pad this morning, it ask for a password. I did not set a password and now my i-Pad is disabled and I can't use it, can you help?

    I up loaded iOS7 last night and when I opened my iPad this morning, I was ask for a password. The problem is, I did not set a password and when I used the 4 digits I would normally use, the i-Pad disabled and I cannot get it open. Can anyone help?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Disable Touch Pad, WIN7, 15t or 17t

    After reading several posts:
    I don't see "touch pad settings" under mouse in control panel.
    I want to either:
    1. disable the touch pad so that it stays disabled, even on restart, or
    2. employ the "touch pad disabled" when mouse installed option.
    Many thanks.

    What is the complete product name or product number of your notebook?
     - see This HP web document if you don't how to locate the model number and\or product number.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • B570 - Disable Touch Pad

    The laptop had to be rebuilt due to issues, and since then I've been unable to disable the touch pad, which is resulting in the mouse jumping all over the screen while typing.  An external mouse is used, but need the Touch Pad disabled.  The rebuild does not allow this to be disabled using the F6 key.  Unable to use the manual settings instructions either.  How else can this be disabled?  Thanks.

    What is the complete product name or product number of your notebook?
     - see This HP web document if you don't how to locate the model number and\or product number.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How to disable touchpad when usb mouse in on HP ENVY dv7-7259nr Notebook PC‏ using Windows 7

    I would like to have my touch pad disabled when using my USB mouse or otherwise be able to manually disable it.  It is a pain to use when typing with the touch pad enabled but I would like to use the touch pad on occasions such as when I am traveling or if my mouse goes out. Not to mention, I would need to re-enable the touh pad if for some reason I have no mouse (keyboard shortcut?)
    I am using windows 7 on my HP ENVY dv7-7259nr Notebook PC‏

    This is what it looks like. 
    You should consider returning you notebook to the Windows 8 OS. There are many new features that it has that Windows 7 never did. Download use the free open source software called classic shell to give yourself a start button in Windows 8 that even has more features than Windows 7 start buton does. Once you use Windows 8 for a while you will enjoy it, especially the refresh feature and lower memory use. 
    I wouldn't hold my breath waiting for Windows 7 drivers.
    regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • %ROUTING-ISIS-4-P2P_CONFIG_MISMATCH : L2 hello-padding configuration on P2P interface Bundle-Ether21

    hi,
    why this log message keep appearing??
    RP/0/RSP0/CPU0:9010-2#
    RP/0/RSP0/CPU0:9010-2#RP/0/RSP0/CPU0:Oct  8 14:50:37.023 : isis[1001]: %ROUTING-ISIS-4-P2P_CONFIG_MISMATCH : L2 hello-padding configuration on P2P interface Bundle-Ether21 will not be used
    RP/0/RSP0/CPU0:9010-2#
    On both side hello padding is disable for level 2.
    interface Bundle-Ether22
      circuit-type level-2-only
      point-to-point
      hello-padding disable level 2
      hello-password keychain ISIS-key
      address-family ipv4 unicast
       metric 10 level 2
       mpls ldp sync level 2
    regards
    tahir

    Router 1 config outup:
    RP/0/RSP0/CPU0:9010-1#sh run int bundle-ether 12
    Tue Oct  9 14:26:10.591 KSA
    interface Bundle-Ether12
    description "EtherChannel to 9010-2"
    mtu 9216
    service-policy output EGRESS-NNI
    ipv4 address 10.0.1.30 255.255.255.252
    ipv4 unreachables disable
    bundle minimum-active links 1
    bundle minimum-active bandwidth 10000000
    load-interval 30
    dampening
    RP/0/RSP0/CPU0:9010-1#show isis interface bundle-ether12
    Tue Oct  9 14:25:56.600 KSA
    Bundle-Ether12              Enabled
      Adjacency Formation:      Enabled
      Prefix Advertisement:     Enabled
      BFD:                      Disabled
      BFD Min Interval:         150
      BFD Multiplier:           3
      Circuit Type:             level-2-only
      Media Type:               P2P
      Circuit Number:           0
      Extended Circuit Number:  134218016
      Next P2P IIH in:          9 s
      LSP Rexmit Queue Size:    0
      Level-2                  
        Adjacency Count:        1
        LSP Pacing Interval:    33 ms
        PSNP Entry Queue Size:  0
      CLNS I/O
        Protocol State:         Up
        MTU:                    9199
        SNPA:                   b414.89e0.9f99
        Layer-2 MCast Groups Membership:
          All ISs:              Yes
      IPv4 Unicast Topology:    Enabled
        Adjacency Formation:    Running
        Prefix Advertisement:   Running
        Metric (L1/L2):         10/10
        MPLS LDP Sync (L1/L2):  Disabled/Enabled
          Sync Status:          Achieved
      IPv4 Address Family:      Enabled
        Protocol State:         Up
        Forwarding Address(es): 10.0.1.30
        Global Prefix(es):      10.0.1.28/30
      LSP transmit timer expires in 0 ms
      LSP transmission is idle
      Can send up to 9 back-to-back LSPs in the next 0 ms
    RP/0/RSP0/CPU0:9010-1#
    RP/0/RSP0/CPU0:9010-1#
    RP/0/RSP0/CPU0:9010-1#sh run router isis
    Tue Oct  9 14:26:41.010 KSA
    router isis core
    net 49.0001.0100.0000.0003.00
    nsf cisco
    lsp-gen-interval maximum-wait 5000 initial-wait 1 secondary-wait 50 level 2
    lsp-refresh-interval 65000 level 2
    max-lsp-lifetime 65535 level 2
    address-family ipv4 unicast
      metric-style wide
      spf-interval maximum-wait 5000 initial-wait 1 secondary-wait 50
      redistribute static route-policy STATIC-TO-ISIS
      redistribute ospf 100 route-policy RP-FROM-OSPF-TO-ISIS
    interface Bundle-Ether12
      circuit-type level-2-only
      point-to-point
      hello-padding disable level 2
      hello-password keychain ISIS-key
      address-family ipv4 unicast
       metric 10 level 2
       mpls ldp sync level 2
    Router 2 output config:
    RP/0/RSP0/CPU0:9010-2#sh run int bundle-ether 21
    Tue Oct  9 14:24:11.346 KSA
    interface Bundle-Ether21
    description "EtherChannel to 9010-1
    mtu 9216
    service-policy output EGRESS-NNI
    ipv4 address 10.0.1.29 255.255.255.252
    bundle minimum-active links 1
    bundle minimum-active bandwidth 10000000
    dampening
    RP/0/RSP0/CPU0:9010-2#
    RP/0/RSP0/CPU0:9010-2#show isis interface bundle-ether21
    Tue Oct  9 14:23:48.457 KSA
    Bundle-Ether21              Enabled
      Adjacency Formation:      Enabled
      Prefix Advertisement:     Enabled
      BFD:                      Disabled
      BFD Min Interval:         150
      BFD Multiplier:           3
      Circuit Type:             level-2-only
      Media Type:               P2P
      Circuit Number:           0
      Extended Circuit Number:  134218208
      Next P2P IIH in:          6 s
      LSP Rexmit Queue Size:    0
      Level-2                  
        Adjacency Count:        1
        LSP Pacing Interval:    33 ms
        PSNP Entry Queue Size:  0
      CLNS I/O
        Protocol State:         Up
        MTU:                    9199
        SNPA:                   0026.980e.d3e2
        Layer-2 MCast Groups Membership:
          All ISs:              Yes
      IPv4 Unicast Topology:    Enabled
        Adjacency Formation:    Running
        Prefix Advertisement:   Running
        Metric (L1/L2):         10/10
        MPLS LDP Sync (L1/L2):  Disabled/Enabled
          Sync Status:          Achieved
      IPv4 Address Family:      Enabled
        Protocol State:         Up
        Forwarding Address(es): 10.0.1.29
        Global Prefix(es):      10.0.1.28/30
      LSP transmit timer expires in 0 ms
      LSP transmission is idle
      Can send up to 9 back-to-back LSPs in the next 0 ms
    RP/0/RSP0/CPU0:9010-2#
    RP/0/RSP0/CPU0:9010-2#sh run router isis
    Tue Oct  9 14:24:41.457 KSA
    router isis core
    net 49.0001.0100.0000.0002.00
    nsf cisco
    log adjacency changes
    lsp-gen-interval maximum-wait 5000 initial-wait 1 secondary-wait 50 level 2
    lsp-refresh-interval 65000 level 2
    max-lsp-lifetime 65535 level 2
    address-family ipv4 unicast
      metric-style wide
      spf-interval maximum-wait 5000 initial-wait 1 secondary-wait 50
    interface Bundle-Ether21
      circuit-type level-2-only
      point-to-point
      hello-padding disable level 2
      hello-password keychain ISIS-key
      address-family ipv4 unicast
       metric 10 level 2
       mpls ldp sync level 2

  • [T440p] TrackPoint buttons not working

    Hi,
    I have a weird problem with my T440p's TrackPoint (running Windows 7 Pro, x86) using out-of-the-box settings. Basically, it seems that its buttons do not work at all - the designated upper regions of the TouchPad (which should supposedly function as TrackPoint dedicated buttons) produce no effect upon clicking. Also, if I disable the TouchPad in the Mouse control panel module (ThinkPad tab), I can no longer click anything and have to resort to keyboard navigation to restore mouse functionality.
    What is interesting is that this is the second T440p unit I have tried to use the TrackPoint on and failed. The first one was also running Windows 7, but had a different screen (HD+, while the current one is Full HD) and CPU (2-core i5 vs. current 4-core i7).
    How do I use the TrackPoint buttons, again? Cause it's obvious by now that it does not work the same way as on my trusty X220 machine...
    Solved!
    Go to Solution.

    FOLLOW UP;
    when ultranav driver is installed then i do not seem to have issues with the trackpoint movements, until I start clicking buttons. For example this is a standard event. I am in window , like in  a multipage word document, and i want to scroll down using the slider on the left frame of the window. If I do it by keeping the button pressed and moving the trackpoint - all works fine; but if I want to do it by simply multiple clicks at the bottom part of that slider part of windoe frame (left frame) then after 3 clicks (always ) the track point and buttns freeze forever, or sometimg can be unfreezed by external mouse movements, or by quikcly moving my hand over the touchpad...
    As if quick succession of button clicks created the problem
    When no ultranav driver is installed (and touch pad disabled in BIOS) then occasionally the button do not work and in general harder clicks are needed, and occasionally succesion of clicks also freezes the track point and buttons...some time can be "woken up" by external mouse movements and sometimes not.
    thanks for any help or pointing to a place on www where I can find solution..
    by the way anybody heard of physically putting the old trakcpoint system (like e.g. in T60) to t440. ???

  • T440p n5321 GPS not working

    Hello,
    I just upgraded my T440p with an Ericsson N5321gw  mobile broadband card. Unfortunaltely the build in GPS module doesn't deliver any data. The driver is correctly installed (visible in the Device Manager) and the firmware is updated.
    When I run Microsofts sensor diagnostic toolkit, it sais the device is Initializing, so first thing I guessed was, it doesn't get GPS fix. But now, since I ran the tool outside under clear sky it should have gotten fix by now.
    I use Windows 8.1 and the mobile broadband card is activated. I'm running out of ideas now, can anybody give me a clue how to get the GPS device to work?
    Thanks,
    tmoehle

    FOLLOW UP;
    when ultranav driver is installed then i do not seem to have issues with the trackpoint movements, until I start clicking buttons. For example this is a standard event. I am in window , like in  a multipage word document, and i want to scroll down using the slider on the left frame of the window. If I do it by keeping the button pressed and moving the trackpoint - all works fine; but if I want to do it by simply multiple clicks at the bottom part of that slider part of windoe frame (left frame) then after 3 clicks (always ) the track point and buttns freeze forever, or sometimg can be unfreezed by external mouse movements, or by quikcly moving my hand over the touchpad...
    As if quick succession of button clicks created the problem
    When no ultranav driver is installed (and touch pad disabled in BIOS) then occasionally the button do not work and in general harder clicks are needed, and occasionally succesion of clicks also freezes the track point and buttons...some time can be "woken up" by external mouse movements and sometimes not.
    thanks for any help or pointing to a place on www where I can find solution..
    by the way anybody heard of physically putting the old trakcpoint system (like e.g. in T60) to t440. ???

  • Accidentally uninstalled System Control Manager

    I accidentally uninstalled my System Control Manager and now the Fn+Function keys are not working, like the track pad disable, ECO setting, all don't work. Would anyone please provide me a link to download SCM for my GS70 with 970m, I have been looking for it for a while and cant find it. Thanks.

    Here u go 
    http://www.msi.com/support/nb/GS70-2QE-Stealth-Pro.html#down-utility&Win8.1 64

Maybe you are looking for

  • Ipod cannot be synced an unknown error occurred (-40)

    Had my nano for 6 months no issues with sync of music or photos, a few weeks ago every time I plug it to sync an error "ipod cannot be synced an unknown error occurred (-40)" click ok and it goes ahead with music sync but not photos. help thanks

  • EA6350 usb storage problems

    I have a WD Mybook 3tb drive setup as my usb storage, and it is very unreliable. At times it works fine, but is unusble a large majority of the time. As in, it can't access a single file on the drive. It doesn't seem to be related to access either, a

  • PM Order: get PRT list for an operation

    Hi expert, I need to get the PRT list for an operation for a PM order (in particolar I need the documents related to a specific operation). Do you know if exist a FM? Any suggest? Thanks Salvatore

  • XL Reporter COM Add-In Problem

    Hi All, When Iam trying to install Com Add-In from Excel, Its not loading. I had given all administrator rights to this user still iam unable to load the Ixllreporter.dll. It is working with only administrator Log in. Iam usinf Excel 2007. I followed

  • Decent replacement for iCal

    Does anyone have experience with iCal replacements? I'm looking at Sunbird, but would be open to other suggestions.