I PHOTO NOT OPENING FULLY

Had a software problem and took my powerbook to apple store where it was completely wiped clean and reinstalled all software ..... now when i open i photo
the pictures wont open fully and remain unclear as if they are were taken with a
1 million pixel camera you can see the pixels ie squares in the pictures ....some open ok but mostly they open in very poor quality ....they were all taken with the same camera on thre same settings any ideas

David:
After reinstalling the software did you create a new library and then imported photos from your old library folder? It sounds like what you're seeing are thumbnail files that were imported as full size files. Check on and see what the size and dimensions are. Do you have the original library folder anywhere? If so then launch iPhoto with the Option key depressed and, when asked, navigate to that original folder and select it to open. See what you get then.\

Similar Messages

  • I am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully,

    i am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully, it just keeps my mac (old 1.6Ghz 2.5 GB sdram G5 still good for most stuff i need) spinning for ever but i can see compression type H.264 selected and the other setting but i can not select any other options as it still thinking but never opens! why is this happening how do i get round it?
    my work flow is: 300 images shot on a 5d mark II medium jpegs opened in Light Room cropped to 16:9 then exported and opened in quick time i can save a .mov H264 giving me files sizes of 14 mb for a 16 second time lapse, mp4 9 mb. the only way i can get large files is saving as a self contained movie then i get 300mb files.
    i need to save my files 1920 x 1080 photo jpeg codec as i want HD quality.
    i am sure there is a simple way round this?
    thanks guys!

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. 
    How large is your hard drive and how much hard drive space do you have left? 

  • Transform Palette is not Opening Fully

    I am using Adobe InDesign CS on a Power mac G4, Mac OS X, Version 10.4.11
    My Transform Palette from the Windows tab is not opening fully. I have reset my palettes by going to window/workspace/Default, all of the palettes are fine. When I go to Window/Transform the palette pops up and is 1/4 of the size it should be (vertically). I am only able to see a sliver. the x circle is showing at the top and the middle circle is grayed out, I cannot see the green circle. The flyout menu does not give me an option to expand the palette either. Can anyone help me with this?
    Thank You!

    Molly:
    Try double-clicking on the name of the palette. It has a 'window-shade"-like function.

  • Iphoto photos not opening get black exclamation mark

    iphoto photos not opening get black exclamation mark when open thumbnails

    Not sure what you meant by "missing till" but all of the photos and movies are there. I concluded that searching for several photos by their file name and then opening them with Preview.
    I'm pretty certain that I only used the Picasa desktop app to test using the Picasa web service for some family photos. I don't think I used it to edit any photos in the iPhoto library but I suppose it's possible that I did without really thinking about it.
    Why to I have tiffs?  - As far as I know I don't. They are all jpg or mov files. I can't imagine why that error dialog said I was missing a tiff.
    I just noticed based upon your suggestion to review the package contents. I have folders for Modified and Originals which I've seen before. But I also have folders for Photos - Modified and Photos - Original. I haven't seen those last two before. Moreover, all but 6 of my latest photos are in those last two folders. iPhoto can show me their thumbnails but can't open them. iPhoto can open the 6 photos in the "Original" folder. I didn't notice that before because they represent a very small portion of my library and I didn't select the right photos.
    iPhoto Library Manager could see only those 6 photos in the Original folder. There are none in "Modified". So iPLM obviously can't see the photos in Photos - Modified or in Photos - Original. Looking at the Info for these two folders, I see they were created on January 7, well more than a month before I downloaded Picasa. Somehow all but 6 of my photos got moved to these new folders. I must have done something to cause this but I have no clue what.
    Sorry this is so long but usually details are important. Do you recommend that I use the Merge Libraries function in iPLM?
    Thanks!

  • Websites in safari snow leopard do not open fully; buttons not showing word

    after installing SL, it seems like some browsers in safari will not open fully... i tried opening some websites eztv.it, where it used to be okay before the upgrade, but now, the "buttons" do not have anything on them... i tried to put safari on the 32-bit mode; i re-installed safari from the SL disc, but still nothing's happening... they all work fine in firefox...
    i also did the upgrade on my husband's macbook white, and he does not seem to have the same problem... his safari is working fine..
    please help

    HI,
    Try Safari Maintenance
    Repair disk permissions.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn
    Message was edited by: Carolyn Samit

  • I photo not opening

    Hi ,
    Im having trouble , maby you can helo . I up graded to lion last week .....im up loading photos to i photo , every thing seemed fine but its just frozen , the  shut it down but it wont open now the i photo opens and the freezes ??
    i have checked and all my software is up to date ?
    Do I need to purchase a newer version of I photo .... now that i have up graded to lion ?
    Please help !!

    Terence Devlin wrote:
    My imac will now not open i photo. I have tried to relaunch i photo on the imac , it says loading but nothing happens.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD
    Thanks TD - I did try your first option, but got the same error message. Unfortunately, I did not fully explain at my first attempt. The error message is :-
    You can't open your current library using this version of iPhoto. You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto
    The Macbook is loaded with Snow Leopard, iPhoto '09, 8.1.1 but the iMac is loaded with Leopard, iPhoto '08, 7.1.5
    When using the Macbook to access iPhoto library on the iMac a question was asked. I cant remember the exact words, but it was on the lines of :-
    Do you want to up grade IPhoto?
    to which I answered - Yes.

  • Lumia 625 - Photos not opening... :(

    I had an 8GB SD card in my phone. When it filled up, I transferred everything onto my computer. I bought a 64GB and moved everything back onto it. But none of my photos are opening. When I open camera roll, all I see are grey squares. I even factory reset my phone but to no avail. The photos and videos appear on my computer but not the phone itself. Does anyone know what's wrong?

    Were these photos shot with your phone camera? Not sure if this will solve the issue .. but try it..
    Go to Lumia Camera-->(...)-->settings .. and tap on 'Find photos and videos shot with Lumia Camera' at exreme bottom ..

  • Photos not opening in PS when opened from Bridge. [was:Question]

    Photo's not opening in PS when opened from bridge, this has been happening for the last few weeks. I will be working in PS and opening from bridge OK,  then suddenly I will open about 6 photo's but they only show the tabs at the top of the screen but no photos. I have to close PS and reopen before they show. Can anyone help it is driving me crazy. Tks

    The odds are you chose the logical file rather than the correct file as your external editor:
    http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-external-edito r/

  • Decision boxes do not open fully and often 2 lines of print overlap

    Decision boxes to enter passwords or other info, do not open completely, preventing access to areas requested, with no way to change the size of the box. Lines of print often overlay one another, preventing reading & understanding of data. This has never been a problem with Chrome, IE, or any other browser.

    Hi Legendsofbatman
    Is the printer still under warranty? If so, you could contact HP phone support as you may require a replacement printer.
    Re. your query on individual ink cartridges (IIC). If you mostly print black text then an IPH (integrated printhead) based printer would suit best (many of them can work in reserve mode so the tricolor cartridge isn't needed)
    There's more info on the following page
    Ink usage in inkjet printers
    http://h10060.www1.hp.com/pageyield/articles/us/en/InkUseage.html
    Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Talktalk mail page will not open fully

    Every time I upgrade Firefox my web mail page opens,but will not open subpages
    The first page after login Lists Mail.trash,sent,etc.
    There are no sublists New mail,trash, sent etc
    I am forced to uninstal firefox & re instal firefox 3.6
    WHY?

    Hi Berni
    look in HD/Library/Internet Plug-Ins/ & move/trash the Adobe PDF viewer plugin; restart any browsers & things should behave again.

  • Plugin window not opening fully.

    Hey guys.
    Would any of you use Reaktor and know why the plugin window within LPX doesn't open fully?
    See attached screenshot.
    Thanks

    Go to Reaktor when it is open as a plugin ,  and go to File / Settings
    Under the option tab there are settings where you can manually resize the window....

  • I photo not opening when i click it

    Got my Mac back and thought it would be easy to reboot it from time machine, it kinda was but  Icant open iPhoto comes up with a small window asking what iPhoto it wants me to open and there is none.

    There is a separate window that opens up and says which photo library do you want iPhoto to use.  So I am not sure what to do. Terence I am not sure where the picture  folder is. sorry

  • Why do cimg photos not open?

    After transferring iPhoto library and combining it with another library many photos are duplicated AND many won't open ... CIMG and PICT photos open as a black screen with a triangle and an exclamation point is in it.  How do I recover those photos?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Raw Photos Not Opening

    Hi.
    I am using an Apple  Macbookpro, shooting with a Canon EOS Rebel T5i and trying to open RAW photo's  in Photoshop CS5. I have tried various updates as per the suggestions in these topics, but no luck, same message  from Photoshop saying:
    "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information."
    Any suggestions on what to do?

    The Rebel T5i was first supported in Adobe Camera Raw (ACR) 7.4
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    ACR 7.4 is only compatible with CS6 apps and later - not CS5.
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    Your options:
    Upgrade to CS6
    Join the Cloud
    Join the Photoshop Photography Program for $9.99/month and get Photoshop CC + Lightroom 5 + extras
    Buy Lightroom 5, convert to DNG then edit the DNGs in CS5
    Convert the T5i Raw files to DNGs using the free Adobe DNG converter then edit the DNG files in CS5
    http://www.adobe.com/products/photoshop/extend.displayTab2.html

  • IPhoto photos not opening up elsewhere?

    I transferred my iPhone photos to my Macbook Pro and now they show up in iPhoto but I would like to know if I can actually access the folder and see the pictures in for example Preview. I wasn't able to find it by searching them in the Spotlight.
    If not, are there other methods to transfer photos and possibly videos to my Macbook Pro by actually being able to access the folders of the files.
    Thank you.

    If you prefer not to use iPhoto you can transfer the pictures using Image Capture. If iPhoto is opening when you connect the phone, you can quit iPhoto and manually open Image Capture. You can make Image Capture open automatically by first open in iPhoto and on the menu named iPhoto click Preferences and then General and set "Connecting Camera opens:" to Image Capture.
    If you later decide you want those photos in your iPhoto library you would need to use the iPhoto File menu import.
    If you want to move the photos already in iPhoto to standalone files you can select them in iPhoto and the use the iPhoto File menu to export them.

Maybe you are looking for

  • Pages won't open doc or docx documents

    I am a professor and my students upload papers to a LMS either as a doc or docx. I then download them and open them in Pages. Suddenly I am no longer able to open any documents in Pages. Can someone please

  • Problem when sending mails with excel attached

    Hi   I'm tryin to send mails via SAPOffice with attached excel documents. I'm using FM SO_NEW_DOCUMENT_ATT_SEND_API1. I have a problem with the code. Here I post it: DATA:  ti_objbin    LIKE solisti1   OCCURS 150 WITH HEADER LINE, ti_objhex    LIKE s

  • Seeing Flash content in websites

    Can my 3G be made to see Flash content in websites? Is there a version of Flash for iPhones?

  • Changing colors of individual bars in a XY Graph

    I am using an XY Graph (bar style) to display 50 voltages. I have limit settings (low alarm,low warning, high warning, high alarm)that I would like to impose on each of the 50 bars in the XY graph. My problem is that any way I try it the limits are o

  • Multiple Artists for one so

    Hi all, Kapyrna here. I just bought a Zen Vision:M 30GB and I love it, for one exception: I have a lot of video game remixes and such that have more than one artist as filed in Windows Media Player (like this: [artist]; [artist2];...). I'm using ID3