I play pogo. Since the new firefox update, when I click on a gameroom firefox closes down leaving me looking at my desktop. I hate this.

My question pretty much says it all. I have this same problem in both the newly updated version and the previous version, but only since the update. I never experienced this issue until the update.

It sounds like Firefox crashes.
Can you give me your crash reports?
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and paste them into your response here.
If you don't have any crash reports listed at about:crashes, move on to this.
Can you try to start Firefox in Safe Mode to see if Firefox works properly with no error? You can start Firefox in Safe Mode below:
*'''Windows/Mac''': Go to Help > Restart with add-ons disabled
*'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole
If Firefox opens up fine with no problems, it's probably one of your extensions that's causing the issue. You can re-enable your add-ons one by one until you find the one that causes the issue upon being re-enabled.

Similar Messages

  • Since the new iTunes update 11.3, right after that I couldn't connect my iPod nano 7th G to iTunes. It kept showing me that it couldn't find my ipod, that I had to reinstall iTunes. I did that and still. And now I can't connect my iPhone 5

    Since the new iTunes update 11.3, right after that I couldn't connect my iPod nano 7th G to iTunes. It kept showing me that it couldn't find my ipod, that I had to reinstall iTunes. I did that and still. And now I can't connect my iPhone 5 to iTunes to sync my music. Can anyone please help me ?

    Hey zoelevi_13,
    Here is an article that will help you troubleshoot this issue with your devices not being recognized by your computer:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • When I load cds i get a message that states, "User not registered for online use." This problem has only begun since the new itunes update and is only a problem on my pc laptop.  Media content (track names, etc.) do not load.  Thanks

    When I load cds i get a message that states, "User not registered for online use." This problem has only begun since the new itunes update and is only a problem on my pc laptop.  Media content (track names, etc.) do not load.  Thanks

    See  Re: itunes 12 track names not found and user not registered for online use.
    tt2

  • Why since the new i06 update do I not get my notifications on texts when my iphone 4 is in lock screen?

    Why since the new i06 update can I not get my notifications sound for texts when my iphone4 is in lock screen?

    You already have a thread going on this...
    Anyone having problems with their phones after i06 update?

  • After altering the "Processes" list in Task manager, almost all of my programs show the iTunes icon, and when I click on, for example, Firefox, iTunes will load. Uninstalling iTunes restores the normal loading of other programs, but re-installation of iT

    After altering the "Processes" list in Task manager, almost all of my programs show the iTunes icon, and when I click on, for example, Firefox, iTunes will load. Uninstalling iTunes restores the normal loading of other programs, but re-installation of iTunes makes the problem recur. Any answers?

    First I'd set up a System Restore point. Then try applying the LNK registry fix from the following document:
    File Association Fixes for Windows 7
    Does that get your icons back to normal?

  • How can I remove track numbers that have appeared in front of all of my song titles, since the new iTunes update of 12?

    Windows OS 7 
    iTunes 12
    Ever since the new update with iTunes 12, all of my song titles have a track number before them.
    Is there any easy way to remove this without having to go through my entire library?
    Any help would be appreciated.
    Thanks,
    Nancy

    turingtest2 wrote:
    OK, that was the wrong approach. What should have worked would have been the process described in Empty/corrupt iTunes library after upgrade/crash. No doubt your songs not only start with two leading digits, but have also lost the information regarding artist, album and their actual track numbers.
    Make a strong cup of coffee/tea/your favourite beverage and review this thread: Any software that can rebuild iTunes songs lost to Unknown Artist/ Unknown Album. It should be possible to restore a pre-upgrade version of your library, the reconnect it to the files (assuming they have been moved). Please feel free to ask questions.
    tt2
    I couldn't get that script program to open.   I'll just have to manually fix this mess. 
    Thanks!

  • HT201210 Has anyone else received a -39 error since the new itunes update?

    Since the latest itune update, I have completely lost all my uploaded audio books.  When I try to restore from my ipod I get error -39.  Has anyone else had this issue?

    I have no idea which password you mean. Your phone's password? Your Apple ID password? Your iTunes Store password? The Backup encryption password? It is impossible not to have an Apple ID password or iTunes Store password. They are usually the same, but don't have to be.
    If you need the backup encryption password it is cretain that you entered it, but it may have been a long time ago. It is prompted the first time you back up after checking "encrypt backup" in iTunes, and can also be required by your IT Administrator if you have a corporate MS Exchange email account on your phone. It is never again prompted until you need to restore from the encrypted backup.

  • Desktop pic changes every time I restart the MAC since the new OIS update

    Anybody can help with?

    ewaller, thank you for your response and interest! at this moment i'm so happy seeing the correct hour on the screen that all that i want is enyoi it!!!
    I live in Barcelona so, teorically my UTC is UTC + 2. During all this time with UTC the time has been changing every time i started the computer but without following a pattern. So one day the time was 30 min. ahead the real time, another day 2 hours before and so on...  a bit crazy!
    I have Windows installed on another partition, but I rarely started it.
    ewaller wrote:
    verduler wrote:This is the output of hwclock --debug. It's a translation because my locale isn't english
    FYI.  You can prepend LC_ALL=C to a command to force English output.  Example:
    LC_ALL=C hwclock --debug
    Could have saved you some translating
    If you are happy with the clock set to localtime, great.  I prefer having it set to UTC for a variety of reasons that have been discussed on these forums that I'll not repeat here.
    The hardware clock is UTC
    Your system assumed the clock was set to UTC
    Time read from Hardware Clock: 04.22.2012 10:38:11
    Hardware Time: 22/04/2012 10:38:11 = 1335091091 seconds after 1969
    Sun April 22 2012 12:38:11 CEST -0.381791 seconds
    The system shows your time as being two hours ahead of UTC.  UTC does not have summer/winter time adjustments.  I assume that you are one hour ahead of UTC, plus an extra hour of adjustment for summer.
    The post I took this from was posted at 01:01:56 PDT (UTC-7).  What time (your local time) did you make that post?
    If it took you 20 minutes for the translation your hardware clock at the time would have been about 11:01.  That is  10 hours ahead of me.
    I am confused, because I expected it to be about 9.  If things are working right, it should be 7.
    Anyway, it would appear if the change you made fixed things then your hardware clock was not set to UTC.  If you want to pursue this, I am glad to help.  If not, I am sure we will be talking about clock settings this fall

  • HT4061 When proforming the new iPhone update I received an error message-iTunes has detected an iPhone in recovery mode.  You must restore this iPhone before it can be used with iTunes.  If I choose to restore will i get everthing back.  Like my photos et

    When performing the new iPhone(IOS6) update I received an error message - iTunes has detected an iPhone in recovery mode.  You must restore this iPhone before it can be used with iTunes.  Will I lose everything if it goes back to factory settings.  Right now my phone wont do anything.  It is just showing a cable, an arrow  and the iTunes logo.

    If you restore from backup.
    You should have made sure that everything was on your computer bef ore updating anyway.  Did you fail to do that?
    All pics taken with iphone should be imported to your computer regularly as you would with any digital camera, most especially before any update/restore/etc.  Did you fail to do that?

  • Problem importing photos after the new Photos update:  When I drag photos from my desktop, why don't they don't replace the previously imported photos in "Last Import".

    When I drag photos from my desktop to the new Photos icon, they don't replace the previously imported photos in "Last Import".

    After several attempts, I now find that this is working for me.  I wasn't able to open the IMPORT folder in Photos until I clicked on "Close" from File Menu. Once I was able to open the IMPORT folder and select the photos for import, the new photos appeared in "Last Import."

  • How do I change from my old email provider to the new one so when i click on a web link I dont get the old proviser which I no long have?

    Often webpages contain links to someone who can be contacted just by clicking on the contained link and then one's email service pops up with the required email address etc filled in. However i have recently change service provider and I still get the old provider showing which I no longer have, when I click on such website links. How do I get the new provider to show?

    For Firefox you would generally have Use system default if on your system , or choose a web based system such as GMmail
    :T00ls > Options > Applications > mailto: (drop down has choices)
    Windows OS
    :Control Panel > Default Programs > choose program if on your system or Firefox if web based email

  • Since the new Mevericks update my Air can no longer connect to a shared Itunes lib on Macbook Pro

    Hi,
    I have two mac laptops at home. My pro and my air. I have it setup so that I stream all my media from my pro to my air.
    I updated my pro to the newest Mavericks version. Since that update I can no longer connect to my library on my pro via my air.
    Please note that this problem here is with the mac book pro! I updated my air last night and i could still stream.
    All I get is the usual "loading library" (on my air's itunes) but it never connects.
    Other than restarting the application (on both computers) and restarting (both computers) what else can I do?
    Are other people having the same problem??

    Hi Bryan,
    Thanks for your input.
    Unfortunately I cannot get any of the OS X browsers I have tried to get beyond the accepting the site's certificate. All just stall waiting on the Outlook Web Access site. Safari 3.1, Camino, Flock, Firefox (2.0.0.12 and 3 beta 4), Netscape (7.1 and 9), Microsoft's Internet Explorer (thinking that might be more integrated with its Outlook Web Access package).
    I have even deleted the certificates from my Keychain (for Safari) or within the other browsers' preferences.
    Last night I even re-applied the 10.4.11 combo updater and then checked for software updates to confirm my system was up to date, but again without success when attempting to reach the Outlook Web Access site.
    Thanks anyway.
    Ted

  • Since the new software update I am no longer able to syn my itunes playlist to my ipod nano.  Everything that has been put online since Nov 2014 is not helping, any suggestions?

    iTunes latest update has now stopped my ability to sync a specified playlist from my iTunes library to my ipod nano.
    All suggestions on line since Novemeber 2014 have not seemed similar to my nano - it is 16gb and very old, not sure what generation.
    The screen on this one is long an rectangle and not a touch screen.  A round disk that you run your thumb around has e menu, forward, backward and play/stop button, hope this helps you know which one I am referring to.
    Also any iTunes help for my device so far has not addressed and update and how to now use my device.

    Okay - let's cut to the chase...
    If the Menu Bar (File, Edit... Help) shown in my screenshot below is not visible, use CTRL+B to display it. Then click on Help/Check for Updates. If one is available, you will be able to select it at this time.
    Note the item at the bottom of the list; About iTunes. Selecting that will show you which version of iTunes you are using.
    An alternative method to display the Menu Bar is click on the box in the top left of your iTunes window...

  • Ever since the new numbers update that I installed I am unable to open my documents.  I receive a message I need to update....

    Ever since I updated my system to 10.9 and updated the numbers, iphoto, imovie, pages etc I have been unable to open my numbers documents.  I keep getting a message I need to update.  My computer shows I did.  Whats happening?

    I was opening my documents from the document folder on my dock and that's when I couldn't open them.  I also couldn't open them from the old icon for numbers on my dock.  I even couldn't open from finder.  After recieiving your message I did use the Applications to open numbers and it did work.  I also had one document set with a password and I still had problems opening it.  Once I got it open I removed the password temporairly and it opens now from the document folder like it used to before.  Oh yes, I forgot to mention I removed the old Numbers icon from the dock.  Then I dragged the icon from the Applications folder onto my doc and all seems fine.
    Thank you for your help, I just don't know why these things just don't update automatically from Apple.  Ever since using Apple products these past 3 1/2 years I've decided no more Window's computers.  Please to Apple.....is there a way they can take care of these updates beforehand?

  • TS1363 My Iphone 5 will not sync with my Itunes.  I have updated my drivers, uninstalled and reinstalled my Itunes, done all the necessary steps.  Ever since the new software update it will not sync and will not even show my Iphone when i open Itunes.

    My Iphone 5 and Itunes no longer sync after I updated my IOS to 7.1  I have done multiple things to troubleshoot.  Uninstalled drivers, reinstalled drivers, uninstalled Itunes, reinstalled Itunes, etc..  It will not show my Iphone in Itunes anymore and will not sync. 

    Hello bsae14,
    I would be concerned as well if my iPhone was not recognized by iTunes.  Thank you for providing all the information with the steps you took in regards to this issue.  I found an article with a few more steps you can take (you can skip the steps you have already taken):
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • How to trigger error message in PCUI when a BADI is called in SAP Backend

    Hi, I am currently coding some validations in the implementation of BADI, CRM_CUSTOMER_I_BADI. I know that PCUI will trigger the interface methods, CRM_CUSTOMER_I_CHECK and CRM_CUSTOMER_I_MERGE. So is there any way I can deliver status or warning or

  • Dynamic creation of component

    Hi , I try to create a component in DC B from DC A.For this I use the method wdThis.wdGetObjectComponentUsage().createComponent(componentName, dc); where componentName = path of the webdynpro component eg:com.sap.a1s.reui.plugins.fdt.expressions.deci

  • Save for web preview not working in Photoshop CS4

    Hello all. I'm having a problem with Save for Web in Photoshop 11.0.2. Basically, whenever I move to save an image using "Save for Web & Devices," the preview window is stuck in GIF mode. I can move the Preset settings to any of the choices, and also

  • Work about one site on two comuter

    is there anyone know how to get a site created on iweb 09 from one computer to another to make changes before publishing?

  • Saving user input for later use ! How ?

    Hi ! I wrote a simple program called GPA Calculator. In the program, the user chooses the lessons he takes and he enters his grades on those lessons and the computer calculates his GPA. It was a simple task to do thanks to swing class. But the proble