I-pod makes itunes freeze and doesn't connect!!!!!

Everytime i plug my i-pod nano into my computer, it freezes my i-tunes and it doesn't connect to it. How do I get it to be recognized???

I have exactly the same problem since 2 days: My iPod 4G (40 GB) died. More specificly, the harddrive is out of order. I formated it, updated via the iPod update application, but it still has severe problems and they become worse. For example, I can hear the iPod trying to start several times until it is up and running (sometimes it never makes it). Or, when I copy songs on it it suddenly freezes. Or, when I try to play a song, it is not able to open it. As I said, it's dead or at least dying.
It is out of warrenty, however, I got this iPod as a replacement for a previous one during it's warrenty in summer 2005. I guess it only can be solved with a new harddrive (or a new iPod ).
Any experience with Apple's policy in such cases? The harddrive should not be dead after a few months.
Is there a (free) diagnostic tool available to find the exact reason?

Similar Messages

  • ITunes freezes and doesn't recognise iPhone

    Hi, I've got an issue with my iPhone 3G running on iOS 4.0.1. Everytime I connect it to my PC (running on Windows 7 32-bit), iTunes freezes for a few minutes and doesn't recognise the device. I've been searching for the solution for a couple of days now and have found the following thread:
    http://discussions.apple.com/thread.jspa?threadID=1141495&start=75&tstart=0
    Fix provided by BeeBopp work for me but only until I reboot my PC. Then I have the same situation - having iPhone connected to PC, iTunes freezes and doesn't recognise the device - so I need to go to Device Manager and update the drivers manually even though they seem to have been installed correctly (I have Apple Mobile Device on my list before I update the drivers), but I need to point Windows to use the drivers from
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\usbaapl.inf
    I have already tried:
    -completely removing iTunes and its configuration files
    -reinstalling iTunes (the newest available version)
    -removing iPhone from the devices list and reinstalling Apple drivers
    Nothing works - everytime I reboot PC, I need to update drivers manually.
    Do you have any idea what's causing that? Thanks

    Hello cn12,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ts3219
    Best of luck,
    Mario

  • ITunes freezes and doesn't respond when connecting iPhone 4

    Well yesterday I had the two of the most common problems that a lot of people seem to be having with iTunes after the latest update- opening iTunes and not getting my iPhone 4 to be recognized. I solved the iTunes problem last night and iPhone is now being recognized on my computer but when I connect it to my computer iTunes automatically freezes and stops responding. When I disconnect it and restart iTunes it responds again and runs smoothly like nothing happened.
    When it freezes beside "iTunes Store" it says "iPhone" and it seems like it freezes while it's trying to sync my phone. I've tried restarting my computer, leaving it connected before starting iTunes, waiting until iTunes comes up to connect it, but whatever I do iTunes just won't work with my iPhone connected. Any ideas on how to fix this?

    Hello cn12,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ts3219
    Best of luck,
    Mario

  • ITunes freezes and doesn't recognize iPod Touch

    Let me start by saying that I finally know what the problem is, I just don't know how to fix it
    About a 2-3 weeks ago, when connecting my iTouch (1st gen) to sync with iTunes it would freeze the app (but all other windows and programs worked fine).  You could hear Windows "recognize" the device and if you left it attached, after about 3 minutes iTunes would then start responding again.  However my iTouch wouldn't show up.  It was recognized in device manager with no errors, just not showing in iTunes.  I could attach it to my Netbook or any other PC I had and it would be recognized and work perfectly, just not with my main system.
    After spending hours online trying to find a solution and going through the normal stuff (i.e. Re-install of iTunes, update of drivers, reset iTouch to defaults etc.) I finally came to the conclusion that perhaps it was possible that something was just amiss with that particular PC.  Since it had been awhile anyway, I decided to just wipe and reload Windows just to ensure everything was working correctly. 
    To my surprise, the exact same issue returned! At this point I knew it had to be some type of issue or conflict with another piece of software I had installed.  So once again I formatted and began a reload of my system, only this time I noted and tested at each step of the re-install (installation of Windows updates, drivers and software).  I finally found what was causing the issue!  And the culprit is........(drumroll please).........
    Microsoft Security Essentials
    No way you say!  Yes way and I proved it....
    By stepping through the re-install process and testing iTunes after every change, it stopped working and gave me the same issue listed above right after I installed Microsoft Security Essentials.  Just to put my mind at ease, I uninstalled Microsoft Security Essentials, and immediately the issue went away and iTunes was able to see my iTouch again.
    At this point, I'm not sure if it's a iTunes or a Microsoft Security Essentials issue, so I'm posting this in both forums.
    System:
    Win7 Ultimate x64 SP1
    i7 920
    12GB RAM
    128GB Corsair SSD
    Asus P6T Deluxe
    eVGA GeForce 465SC
    iTunes & Microsoft Security Essentials (latest versions)
    Anybody have an idea of how to resovle this (other than the obvious one of removing Microsoft Security Essentials)?  I actually like Microsoft Security Essentials as my AV client so I'd like to find an answer that allows me to continue using it.
    Thanks in advance for any help,
    Mike

    Hmm....I just had another thought.  All the machines are running Win7 SP1, BUT the 2 that can sync with MSE installed are 32bit versions, however the one that can't is 64bit.  Not sure if that makes any difference though.  All are clean installs with Win7SP1 media, not SP1 installed later.

  • I cannot connect my iPhone 5 32GB IOS 6.02 to iTunes 11.01 on a Mac Book Pro. The screen freezes and doesn't recognize the iPhone at all. Thank you for your help.

    I cannot connect my iPhone 5 32GB IOS 6.02 to iTunes 11.01 on a Mac Book Pro. The screen freezes and doesn't recognize the iPhone at all. Thank you for your help.

    Read here.
    http://support.apple.com/kb/TS1591

  • I updated iTunes and now my 160 GB iPod Classic makes iTunes freeze.

    I have done everything from resetting the iPod to uninstalling and reinstalling iTunes.  I have formatted and reformatted the iPod.  The iPod actually works, I can go through and fix the settings to my liking.  But when I go to sync with my iTunes, iTunes freezes and I have to reboot the entire computer to be able to use iTunes again.  I just can't plug in the iPod.
    I have also tried a different computer, with the new iTunes and different cords as well.  This makes me afraid to even try to sync my iPhone.
    Help!  What do I do?!

    If you get a message that says Ipod_control is corrupt you should put you Ipod into Disk mode by 1st holding pressing the MENU AND SELECT buttons at the same time util the apple logo appears. Then press the SELECT button and PLAY/Pause buttons at the same time until it goes into disk mode. Once that happens connect it to your computer and you will see your Ipod as an external drive. Right click on the IPOD drive Icon and select properties, then slect tools, then select error checking, then select fix file system errors, then slect OK. Once the system files are fixed, this will take a while, your Ipod will be recognized by Itunes like it use too. I know this is a pain, but its the only thing I could figure out and it worked. Good luck!

  • My 2G iPhone when connected makes iTunes freeze

    When I connect my old iPhone (I have 2, both active, the new 3G and original iPhone) it makes iTunes freeze, this happens when I click cancel on a "iPhone camera connected what action would you like to perform" window. So then it doesn't register on my iTunes cause it's frozen then I unplug it and it registers but now it's unplugged then iPhone icon disappears as if I unplugged it which by this point I have, and in the end the iTunes unfreezes but I'm not connected.

    You should be able to just click on the device's current name on the left-hand side of iTunes and type in the new name

  • My iPod touch 5th g. is stuck on recovery mode, before this i was trying to update it to ios8. I'm trying to connect it to iTunes but its under unspecified and doesn't connect to itunes(asus eee pc) What do i do?

    my iPod touch 5th g. is stuck on recovery mode, before this i was trying to update it to iOS8. I'm trying to connect it to iTunes but its under unspecified and doesn't connect to iTunes(Asus Eee pc) What do i do? please help me.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    And as necessary:
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • I have a used mac computer. I want to sync and update my iphone. Currently itunes tells me that my iphone is connected to a different itunes account. How do I make itunes sync and update my phone without deleting all the current information on my phone?

    I have a used mac computer. I want to sync and update my iphone. Currently itunes tells me that my iphone is connected to a different itunes account and will sync, but delete everything from my phone. How do I make itunes sync and update my phone without deleting all the current information on my phone?

    Iphone will sync with one and only one cpomptuer at a time.  Syncing to another will erase the current content and replace with content from the new computer.  This is the design of the  iphone.
    It will erase the content when you sync.
    Why not update from the comptuer with which you normally sync?

  • Each time I try to watch my itunes U podcast and try to skip forward my itunes freezes and gives me an error report and shuts off, this happens also when I try to convert it to my iPod. How can I fix this problem to be able to use the iTunes U?

    Each time I try to watch my iTunes U podcast and try to skip forward my iTunes freezes and gives me an error report and shuts off, this happens also when I try to convert the podcast to my iPod. How can I fix this problem to be able to use iTunes U?

    Hello, bisco,
    This forum is for questions from people who administer iTunes U sites. You'll be most likely to get help with this issue if you ask in the iTunes or iPod forums.
    Regards.

  • After update - iTunes freezes and needs a force quit when I plug in any device!

    I recently update to OS X Yosemite and I also updated my iTunes to 12.1 - but now every time I plug in my iPhone 6 or my iPad mini, my iTunes freezes and I have to force quit. So now I can't even plug in and sync my devices or update them or do anything!
    Help? Anyone?

    Anybody have any idea how to fix this? Or anything similar happening to you?

  • My iTunes freezes and crashes whenever I try to burn a CD

    It hits about a quarter way through the progress bar for preparing the playlist to be burned, and then iTunes freezes and quits every single time. Help?

    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • HT204406 I have purchased match but when i try to play a song from the cloud on my ipad it displays a message of " cannot connect to iTunes Store" and doesn't play the song. i have reset both devices.

    I have purchased match but when i try to play a song from the cloud on my ipad it displays a message of " cannot connect to iTunes Store" and doesn't play the song. i have rest both devices.

    I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

  • ATV doesn't show iTunes playlists and doesn't play them using the Remote app

    Hello
    Using ATV3 with the latest software version and it is connected to the iTunes library (also latest version) on my Mac Mini.
    When I go to Computers on the ATV I can see the content of the iTunes and am able to play both Music and Vidoes however I don't see the playlists on iTunes there. On the ATV configuration it is configured to Show playlists -> All but still no Playlists appearing at the top of my movie and TV show listings section.
    When I connect to the ATV using the Remote app on the iPhone and go to Computers there I do see the playlists but unable to play the ones with Vidoes just music.
    Any ideas what would cause these problems...?

    log into my library through more > computers where? on the Remote? This is exactly what i'm doing, I can see the content of my library there but I can't play movies from there.
    Re: ATV doesn't show iTunes playlists and doesn't play them using the Remote app 

  • I recently created an account and bought a movie. But any time I press "Play" iTunes freezes and will not respond at all.

    Windoes 7 64bit
    I recently created an account and bought a movie. But any time I press "Play" iTunes freezes and will not respond at all.
    I have tried both uninstalling the software and reinstalling it, I have tried to run the software in safemode, and I have tried to change the Quicktime settings to see if that helps.
    Nothing has worked. It always does the same thing, where it freezes the moment I tell it to "play".
    I have tried to use my other computer instead, going through the same process and I got the exact same result where it freezes.
    Therefore it has to be something to do with the software, because the computers use different graphics cards, yet it responds the same.

    Hi Canon-Thought!
    I have an article here for you that deals with this exact issue. You may have already completed many of the steps that this article will suggest, but look over it to see if it suggests something you haven't already tried:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Also, I suggest paying close attention to the list of programs that you would need to uninstall, in order, so that you can fully uninstall iTunes and all related components from your computer. If those programs and steps are not followed exactly, you may end up with issues using iTunes.
    If this issue only happens with one singular movie, you may need to report that there is an issue with your purchase. We have an article for doing that, and it can be found here:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

Maybe you are looking for

  • CallableStatement UnsatisfiedLinkError

    I am making a function call to an oracle package/function that is returning a value. I am getting at the execute statement an UnsatisfiedLinkError on oracle.jdbc.oci8.OCIDBAccess.copy_value_from_binds(Native Method). I am using an 8i driver for Oracl

  • Order of Albums under Music-- Albums

    When I go to Music-->Albums to view albums on my iPod, they are in alphabetical order. On iTunes, they are sorted "Album by Artist". Is there a way to sort the Albums on the iPod by Artist? Thank you for any assistance.

  • Leading Zeros Supression

    How Can I supress Leding zeroes into target Structure?. Iam getting 10 digits filled zeros left justified and my target systems doesn't need zeros. Is there Standard function in Mapping I can use?

  • NOT SOLVED - Border printing problem

    Disregard the thread that claims this is fixed -- it is NOT. Same problem with a brand spanking new Office Jet 6500. This is NOT a problem with Word. This is NOT an application problem. This is an HP problem because it is their driver that tells the

  • Pulling GL_ACCOUNT info into Sales Billing Report(based on VDITM)

    Dear all, I want populate profit center(this I can get from mat_plant attribute) and gl_account in the Report. My problem is how do I get the join condition between general ledger data and vditm to get the GL_ACCOUNT for each billing item. anyone any