I-pod touch is not getting sync and the error message is coming as "i-tunes couldn't connect to i-tunes store. An unknown error occurred (-3212).

Hi
My i-pod touch is not getting sync and the error message is coming as "i-tunes couldn't connect to i-tunes store. An unknown error occurred (-3212).
I have updated the latest OS 6.0 in my i-pod touch.
Kindly send the solution
Regards
Deepak
<Email Edited By Host>

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
Also, you are not addressing Apple here. We are all just users like yourself.

Similar Messages

  • My ipod touch is not getting recognised after the update in my itunes library. the library is updated. and it shows the connect to itunes sign.

    my ipod touch is not getting recognised after the update in my itunes library. i have updated my library as well. but it shows the connect to itunes sign on my ipod.

    If it happened after updating iTunes on the computer see:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    If after updating the iOS on your iPod:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I pod touch will not turn on and will not charge - just died - did not drop or spill water on it - HELP

    I pod touch will not turn on and will now not charge - just died - did not drop or spill water on it - HELP.  When I plug it into I-Tunes it says the IPOD is in recovery mode

    Have you tried to restore the iPod via iTunes on the computer? See the restoring topic on:
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    If not successful, what happens when you try to restore the iPod?  Any error messages?

  • My Ipod touch will not start up and the menu will stay in I tunes!

    My ipod touch will not start up and the menu will stay on menu of Itunes. Who can help me?

    Hi,
    Have you tried a hard reset of your iPod?  Press/hold the home and sleep/wake buttons down until the Apple logo appears. 
    Hope this helps! 
    ---likeabird---

  • Help, DVD Driver keeps ejecting DVD and requesting a Blank, I insert a Blank and the same message keeps coming up, any suggestions ?

    DVD Driver keeps ejecting DVD and requesting a Blank, I insert a Blank and the same message keeps coming up, any suggestions ?

    Hi
    a. You are using Cheap media as Memorex, NoName etc DVDs - I only use Verbatim
    b. You use a DL-DVD or DVD+/-RW type of media - Old Macs can not use DL-DVDs - I only use DVD-R
    c. Your DVD-burner needs a cleaning - Cleaning DVD without liquid but the brush type
    d. Is there OK free space on Your Start-Up (Macintosh HD) hard disk - I never go less than 25Gb free.
    e. Can You describe the material used to create Your DVD
    - Video Codec/s
    - Photo file formats
    - Audio file formats
    iDVD can not use all but only a few of them - still it tries and then often fails
    Just to start by.
    Yours Bengt W

  • IPod touch will not turn on, and is also dead, what do i do? It wont connect to itunes either!

    MY IPOD TOUCH IS BROKEN.  it was about to die and my charger broke right? so i left it on my shelf, and now im coming back to my ipod cuz i have a chance to charge it and it wont turn on! itunes doesnt recognize it or anything. i've checked the audiojack and its not pink so its NOT waterdamaged.  i've also tried to reset it with the home/power buttons but nothing. D:

    "...it was about to die."
    Do you mean that it was about to run out of power, but because your charger was broken, you could not charge it? Time passed and now you've decided to look at the iPod again.
    Probably, it has simply run out of power and the battery is fully drained. In that case, plug it into power and leave it alone for at least thirty minutes. Only then will it show any signs of life. Leave it to fully charge up before you try to use it.

  • Recently I cannot view certain attached videos because I need the adobe flash player. It does not get installed and the system says it will do so once firefox is closed. pl.help

    recently certain video or pictorial attachments to my e-mails be opened because the system requires the installation of the Adobe Flash player with Java plug-ins. The message also gives a link for installation. It appears to install but nothing really happens. Then the message advises that it will install automatically once security is uninstalled or when Firefox is off. Nothing seems to work. Please help. P.S. I recently also installed the Firefox 4.0 version also

    1.Download the Flash setup file from here using Firefox: <br />
    [http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
    Save it to your Desktop.<br />
    2. Close Firefox using File > Exit <br />
    then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
    {XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
    3. Then run the Flash setup file from your Desktop.
    * On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). <br />
    See this: <br />
    [http://vistasupport.mvps.org/run_as_administrator.htm]

  • My ipod touch will not turn off and the battery (charged to 100% with trickle charge) is discharging on it's own.  Any advice please?

    My Ipod touch has not turned off for some time.  I reset it.  Now, as well, the battery which is charged to 100% and finished with a trickle charge is discharging completely overnight when not in use.  Help please, I use this all the time

    might want to consider posting in the proper forum.  This is the iPhone forum.

  • Not getting pop up the informative message in BADI

    Hi All,
    Am working on me21n Transaction, and implementing ME_PURCHDOC_POSTED Badi in that method i raised an informative message but it was not getting pop up. any body help me out

    Hi Sangeetha,
    In that ME_PURCHDOC_POSTED  View the Method 'CHECK'
    they given some standard validation  for me21n, Check it, it will helpful for your requirement.
    Regards,
    Venkat.

  • My 5th Gen iPod touch does not keep time and the bluetooth will not turn on. Full restore did not fix.

    Recently my 5th generation iPod Touch stopped keeping time. As long as the screen stays on, it will stay accurate, but once it "sleeps" the time reverts to the last accurate time it had. If I go to Settings>General>Date&Time> and turn Set Automatically off and on, it will catch up, but just for as long as the screen stays on. Not too friendly for battery life that way. Also, maybe unrelated, the Bluetooth function will not turn on. When I try to turn it on, I just get a constant spinning wheel.
    I have tried everything from a simple restart to a full device wipe back to factory default. No change. I took it in to the Genius bar this afternoon. They tried a diagnostic and another wipe. Then they said they didn't know and I could pay $150 to replace it. Not a bad deal, but not what I wanted to hear.
    Any ideas?

    All I can suggest is
    Try DFU mode and then restore again to factory settings/new iPod              
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If still problem that means a hardware problem

  • Workflow created using sharepoint designer 2013 is not getting started and the initiator is Anonymous.

    Hi All,
    I have created a Site and List Workflow using SharePoint designer 2013, its a simple list workflow with one stage init on creating an item.
    When i verified the status of workflow its showing as initiator = Anonymous and Internal Status - Not started. Please a screen shot below
    Looking forward for your help.
    Thanks in Advance.
    Sunitha

    Below is the solution.
    Solution:.
    check
    list in workflow manager server  :
    1. Check https://[wfms]:12290 or http://[wfms]:12291 if they are responding 2. Check
    ”WorkflowMgmtPool” is started 3. Following services are running
    Workflow Manager Backend
    Service Bus Message Broker
    Service Bus Gateway
    Windows Fabric Host Service (FabricHostSvc)
    4. Get workflow farm information , workflow database  by  Start Workflow
    Manager PowerShell     get-WFfarm   5. Check if the Workflow Manager farm running(workflow service backend and  front end         should be rennin)  by  Start Workflow Manager
    PowerShell    get-WFfarmStatus
    6. Check oAut in accessible by http:// [wfms]:12291/$SYSTEM/$Metadata/json/1
    7. Restart the WorkflowServiceBackend service
    net stop WorkflowServiceBackend
    net start WorkflowServiceBackend
    Reference Link
    http://blogs.msdn.com/b/laleh/archive/2014/09/03/sharepoint-2013-workflow-troublehsooting.aspx
    Thanks all.
    Sunitha

  • My 4th generation ipod touch will not power off and the volume buttons do not work, any suggestions?

    My ipod's power off and volume buttons are not working. It's as if the volume down button is constantly being pressed. Both buttons "work" as far as I can press them in, but there is no response from the ipod. Any suggestions? I have updated the software, but that did not help.
    Thank you!

    I have the exact same problem!!
    please let me know if you have found a fix / soution
    email me at [email protected] or just reply, any help would be great
    thanks.

  • I cleared some messages and noe I am not getting texts and the messages i do get are disappearing. How do I fix this?

    i cleared some messages earlier today, and now my phone is only letting me preview them. After I read one they disappear. How do I fix this?

    Settings > General > Reset > Reset Network Settings.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Credit note is not getting generate and there is no error log

    Hi,
    Could you please help with the following scenario.
    I have created a credit memo with reference to a billing document. Then  when I try and create a credit note for this credit memo, it does not get generated and the following message apprears 'No billing documents were generated'
    Processing status for this is - 'Not Processed'
    and there are no messages in the error log as well.
    Could you please advise as to what the missing configuration might be? As i can't seem to find what is causing the problem
    Your advise is much appreciate.
    Thanks & Regards,
    Amalie

    Kindly create a Credit Memo Request wrt to Billing Document by maintaining in the Copying Control through VTAF and then create a Credit Memo wrt Credit Memo request through VTFA.
    Then go to VOFA with your Billing Type and maintain Account Determination Procedure.
    it does not get generated and the following message apprears 'No billing documents were generated'
    Do you able to get the Number while saving the Credit Memo or not able to save it .
    Kindly check the configuration of Account ket in VKOA also .
    Best Regards,
    Ankur

  • Quantity fields not getting displayed in the second total row

    Hi,
    As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
    The second total row will have different values based on a formula.
    Please help me out in resolving the issue.
    Thanks,
    Abhishek

    You can provide first row as the SUBTOTAL and next row as the TOTAL.
    Get one extra column on which you can do the SUBTOTAL.
    Regards,
    Naimesh Patel

Maybe you are looking for