I pressed command d when starting my macbook air but i pressed it for too long and now it is searching for something? heeelp please!!!!
pleeeasee help!!! i dont know what to do! at first, i was just cleaning my macbook keyboard and i pressed something that changed keyboard language, but i checked everything and it all said that everything was alright, later, i turned off macbook- in hope that when i turned it on, everything would be normal, but then, i couldn't even sing in my account because i had a password set on it, and every time i try typing the password it types something completely different, and then, i read a post, that in cases like this, we should press command+d while the computer is turning on, and let release the keys as soon as i see grey screen. BUT (i am so dumb) that i pressed it longer... and now, i don't know what it is doing, but i's telling me to choose network, but when i am trying to choose it, and write the password, it doesn't do anything! pleasee help me somehow!!!
It is easy to change the keyboard language by pressing apple/command plus space.
What other keyboards besides US did you have activated on your machine?
Similar Messages
-
i upload all of my photos from my iphone 5 onto my macbook air to get more space on my phone, and now whenver i try to upload it says there is no more storage or there was a problem transferring a picture. what can I do to get more space onto my iphoto? I've tried putting the pictures on flashdrives, but iphoto would no tlet me transfer.
I don't know how large the SSD (solid state hard drive) is, or how big your iPhone 5 is, but with some iPhones having 64GB and some Airs having as little as 64GB and some having as much as 512GB it's not hard to see how storing the contents of your iPhone 5 on your Macbook Air could run you out of space.
Go to the Macbook Air and bring up a finder window and pull the Go menu down and go to the Computer. Right click on the Macintosh HD and select get info. See if there is any available space on the MacBook Air. If not you are out of SSD space (you're storing more on your Macbook Air than it has storage for). I'm not sure if iTunes can store its library on an external hard drive or quite how you would make that happen. But even if you managed that, when the hard drive was disconnected, you would lose access to your library. Using a smart media card might be possible (I don't know) but it would probably be irritatingly slow. If you have a small Air and a big iPhone you might just have to find a different computer to sync to. Just remember a 64GB iPhone is a big chunk of SSD for a Macbook Air. I did it with my previous and my current Air but even my previous one had 256GB and I really just fit. -
I just recently bought Macbook Air but I cant upgrade for free to OS X Lion. Im from Malaysia
I just recently bought Macbook Air but I cant upgrade for free to OS X Lion. Im from Malaysia. Ive tried to redeem but it seems like its only restritcted to US only.
Use this link: http://www.apple.com/asia/macosx/uptodate/
>> http://store.apple.com/1800-80-6419/WebObjects/malaysiastore?partNumber=MD202Z/A -
My iPod was updating to iOS 6 and i shut it off during the update because it was taking too long and now my screen in baby blue i've tried to drain the battery but when i plugged it in to charge the blue screen came back on.I dont know what to do
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I want to use my MacBook Air as an external disk to my iMac. I talked to Apple care and we solved it by connecting a Thunderbolt cable between the two computers. I then turn on the MacBook Air while pressing the "T" and it works. I can sit and work on my iMac and grab/change/save the files that are in my MacBook Air EXCEPT for the Microsoft Office files. I called Microsoft and they can't solve it. They say it might be a problem with the Thunderbolt cable. Has anybody have this problem?
Both computers are 2011 and they both have Office 2011.
Thanks in advance,
AlejandraFor Word it says "Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters (for example, /)"
For Excel it says "the file could not be found. Check te spelling of the filename, and verify that the file location is correct. If you are trying to open the file from your list of most recently used files on the File menu, make sure hat the file has not been renamed, moved or deleted.
I tried this with many different documents, and I always get the same message. -
When turning my MacBook Air it goes straight to OS X Utilities and telling me to reinstall OS X
I had some software to update so I updated and it told me to restart so I did that and it didn't log into my user it went straight to OS X utilities , it wants me to reinstall OS X .
I restarted the MacBook 100 times already but same thing over and over , another weird thing is when I turn it on instead of the apple logo coming up there is a circle with a line threw the middle for a few seconds and then the apple logo comes up.
I have so much stuff I need on my computer and I didn't back up anything stupid of me !!
I hope someone will know how to resolve the issue with out loosing any files ThanksIf the Safe Mode boot won't work, you can still copy your whole drive using Disk Utility.
Press the power button and as you hear the bong,
then hold down the Command and R keys.
• If it won't boot that way then try a network boot
(power then command-option-R keys).
If that won't work then you need professional help.
Get thee to an Apple Store or Apple Authorized Service Provider.
Once booted, click on Disk Utility.
To format (and erase) the destination recovery disk:
Plug in the drive you are about to erase.
Select the volume that is NOT your system disk.
Click on Partition.
Pull down under Partition Layout to 1 Partition.
Click on Options…
Select GUID Partition Table.
Name: Emergency Recovery
Format: Select Mac OS Extended (journaled)
Click Apply.
Click Partition.
Drag and drop the named system disk to Source:
Drag an drop Emergency Recovery to Destination:
(Do not reverse these directions.)
Click Restore (the lower Restore button).
If the procedures above do not work:
Genius reservation http://www.apple.com/retail/geniusbar/ .
Or find an Apple Authorized Service Provider https://locate.apple.com/country
If they do work (once you have secured your data on a backup drive), try resinstalling OS X. -
I have a i=phone 4S and 5S and a i-pad 2
How do I start sending sms from my i-pad this function or app is not loaded on my tabYes, use the iCloud one to have that automatically sync from.
Read this:
http://support.apple.com/kb/HT4895 -
Hello,
A flashing question mark appears when I re/start my MacBook Air 2013. Then, I pressed POWER & OPTOIN buttons and internet options appeared for internet recovery. After internet recovery, the OS X utilities appears with four options (Restore from Time machine, Reinstall OS X, Get help online and Disk utility). But none of them seemed helpful. On the last option Disk utility, the icon created only with 33KB and other disk 1 Mac Os X Base system. On First Aid, the icon Repair disk is disabled. So I could not click on repair disk. Could you please suggest me how to solve this problem asap? Thank you so much for your help in advance!You can try the following:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
I start my macbook air up and a file comes up with a question mark. When I go to Disk Utility I go to update things or erase everything and my disks don't show up or anything. Anyone know what to do?
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need ??????
Your admin account password.
-
How to pass in variables using the command line when starting ActionScript native app
How do I pass in variables or startup arguments using the command line when starting an ActionScript native app? For example, I have my app call MySweetWidget and it has been compiled with Adobe AIR captive runtime so now I have MySweetWidget.exe.
In the command line, I am calling MySweetWidget.exe and would like to pass in variables or properties to the application. I would assume that those variables are then read from the loaderInfo.parameters object.
Please let me know if the Adobe AIR runtime supports passing in parameters to the native runtime. If so, I would like help determining the correct format of how to pass in the variables. Then would you read those from the loaderinfo.parameters object?
Thanks,
JeffI found the answer to my own question:
Yes it is a supported feature. It is documented on the following page:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/desktop/NativeApp lication.html#event:invoke
When you subscribe to the invoke event of the NativeApplication it will subsequently dispatch the event and you read the e.arguments Array object to get the startup arguments passed into the native application. -
When I start my MacBook Air, I get a problem report on the Time Capsule 802.11n. When I click Continue, it asks for a password. I don't know what the password is because I didn't set this up. How can I find out what the password is?
Who set it up?
-
my start up disc is full i have a macbook air, i back everuthing up with time capsule and have movies all my music libraries and photos onto that too so as i have free space, but my max still says my startup disc is full with "other"
First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal. -
Every time i start my MacBook Air i get the spinning wheel and have to soft boot (shift, control, option, power) it three or four time s before it starts. It has only been over the last week or so I also found Safari will not load up and tyou have too open then shut from the drop down then restart it to get a page, any help pleas?
Do this:
Reinstall Lion, Mountain Lion, or Mavericks
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
Repair the Hard Drive and Permissions as follows.
After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall
Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless. -
TS3148 Cannot start my MacBook Air...
I have carelessly removed the startup driver and now only grey screen appears during startup. What can I do to start my MacBook Air?
If you have got Mac OS X Leopard or Snow Leopard, you must use an external disc drive or another PC or Mac. Insert the Mac OS X DVD, press C key on boot and reinstall. If you have got Mountain Lion or Lion, press Command and R keys on boot and reinstall
Maybe you are looking for
-
I have plugged in my Ipod and performed the update, at the end it said Itunes has not installed correctly, please reinstall Windows error 7 (error 5) any odeas how I can fix this I cant put my new music on my playlists without the upgrade
-
How do I re-set my Apple ID password on my i-Phone 4?
-
We purchased RoboHelp 7 on May 7, 2008, with order # AD001542272, less than a year ago. We bought RoboHelp because we wanted an easy to use HTML editor that: • Imports from Word • Creates .pdf files We found out the hard way that RoboHelp does not im
-
HT3228 After stting up iCloud I do not seem to receive emails I used to receive before?
After setting up my iCloud account I am not receiving some emai I used to receive. Do I need to let my recipients know my new iCloud name?
-
I would like to reinstall my CS 5 Design Premium on a new Mac-computer. But the serialnumber is not accepted. I can think of two reasons: - my license is for the dutch version of CS5 Design Premium of - my CS5 license is for an update. (I also tried