I purchased Adobe Acrobat Pro and have tried to install this twice and I am not able to install this?

I purchased Adobe Acrobat Pro and have tried to install it now three times and it just will not even start to install? Any ideas?

Can you describe exactly the steps and behavior that you are experiencing? There really isn't enough detail in your description to assist you.

Similar Messages

  • After purchasing Adobe Acrobat Pro my download window is painfully slowly and seemingly stuck.  If i try to pause or cancel the download it stops responding completely.  I have tried to stop/start, redownload, and start fresh several times...all with the

    After purchasing Adobe Acrobat Pro my download window is painfully slowly and seemingly stuck. If i try to pause or cancel the download it stops responding completely. I have tried to stop/start, redownload, and start fresh several times...all with the same result. Any advice?

    Try downloading the offline installer from http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html
    Make sure you follow the Very Important Instructions on that page.

  • I just purchased Adobe Acrobat pro DC and am trying to download it and it says HTTP failed.  Now what?

    I just purchased Adobe Acrobat Pro DC and am trying to download it and it says HTTP failed.  Now what?

    Hi markt97800229,
    If you have purchased a retail serial key, use this link - https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
    Choose Acrobat Standard DC (Classic)
    If you are using subscriptions, or if your organization has purchased Acrobat DC license via ETLA or VIP program you can download the installers from this page use the link - https://helpx.adobe.com/acrobat/kb/acrobat-dc-downloads.html
    Choose Acrobat Standard DC (Continuous)
    Thanks,
    Karan

  • I purchased Adobe Acrobat Pro XI for my iMac (Mavericks 10.9.4), downloaded it and have attempted to install it 10 or more times. I have done all the usual maintenance steps (repair permissions, repair disk, etc) and it still won't install. All goes well

    I purchased Adobe Acrobat Pro XI for my iMac (Mavericks 10.9.4), downloaded it and have attempted to install it 10 or more times. I have done all the usual maintenance steps (repair permissions, repair disk, etc) and it still won't install. All goes well until the installer gets to "Running Package Scripts" then it stalls or hangs up and does not finish the installation. It runs and runs and runs. It never finishes. I wind up having to force quit the installer. Can anyone point me in the right direction?

    Hi jtento ,
    Kindly enable the Root Account for the MAC and then try the installation there (in the root account). Please find below the URL to enable the root account.
    OS X Mavericks: Enable and disable the root user
    Thanks,
    Vikrantt Singh

  • Ive just purchased Adobe Acrobat Pro and when i pdf a Revit file all text is unreadable. If i do it on a free pdf as Cube i dont have the problem. Whats happening and have i wasted my money

    ive just purchased Adobe Acrobat Pro and when i pdf a Revit file all text is unreadable. If i do it on a free pdf as Cube i dont have the problem.

    Hi michaele,
    What is the extension of the revit file you converted to pdf?
    Regards,
    Rave

  • Purchased Adobe Acrobat Pro XI Student edition from Best Buy and it will not download

    Purchased Adobe Acrobat Pro XI Student edition from Best Buy and it will not download. It made me download an installer  and then when I went back to download it from the Best Buy digital library and clicked on "Download," nothing happened

    I have done both of those and still no luck. I have tried this download on Chrome, Internet Explorer, and Firefox and its the same story on all of them. I have a Windows, also, if that helps

  • Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date.

    Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date.

    Problem is that my pdf files look terrible although I have MacBook Pro (Retina, 15-inch, Mid 2014). I have Adobe Creative Suite Design  Standard version 6.0 (Mac). I have installed every possible update. I think problem is that for some reason my CS doesn´t support retina display? If I view a pdf file in iMessage, it looks fantastic. But if I open the same document in Adode Acrobat Pro, it looks awful. What can I do?
    Thank you so much for your help.
    Pekka
    Pekka Saatsi
    arkkitehti SAFA
    SAATSI arkkitehdit oy
    Bysmedsintie 56
    06500 Porvoo
    040 5955933
    [email protected]<mailto:[email protected]>
    www.arks.fi
    Anubha Goel <[email protected]<mailto:[email protected]>> kirjoitti 24.3.2015 kello 4.10:
    You have been mentioned
    by Anubha Goel<https://forums.adobe.com/people/Anubha+Goel?et=notification.mention> in Re: Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date. in Adobe Community - View Anubha Goel's reference to you<https://forums.adobe.com/message/7335644?et=notification.mention#7335644>

  • I just purchased Adobe Acrobat  Pro and am getting an error each time I try to download it.  Help, please and thanks.

    I just purchased Adobe Acrobat  Pro and am getting an error each time I try to download it.  Help, please and thanks.

    Hi Melanie Wheeler,
    Please let us know the Exact error message, that you are facing while downloading Acrobat.
    Hope to hear from you soon.
    Regards,
    Rahul Tyagi

  • I purchased Adobe Acrobat Pro XI via email download via the Dell Store yesterday. The product key doesn't work/fit into any of the "Registration" templates I've look through on the Adobe website. Manufacturer Part # 65195473.

    I purchased Adobe Acrobat Pro XI via email download code via the Dell Store yesterday. The product key given doesn't work/fit into the boxes on any of the "Register" pages on the Adobe website. Therefore, although I paid for the product and it is downloaded, it is not "installed" and will not work to print documents from emails, etc.

    Hi williamc48321229,
    You must have received redemption code via email from the reseller.
    Please ensure that you are entering the right code as that would be needed to obtain the serial number for activating the product.
    For more details on this, please refer:
    Find your serial number quickly
    Hope this helps.
    regards,
    Anubha

  • I cannot convert a pdf to work with my newly purchased adobe acrobat pro XI

    i cannot convert a pdf to work with my newly purchased adobe acrobat pro XI

    Sorry I cannot convert pdf to Word document (typo)
    Richard Gabai
    Please note my new email address: [email protected]<mailto:[email protected]>
    UnionPay International
    208 Plaza 10, Harborside Financial Center, Jersey City, NJ 07311
    Office (201) 577 5479 / Cell (917) 860 2642 / Fax (201) 577 5480 / UnionPayInt’l.com<http://140.207.194.112/column/en/en_ylsy/index.shtml>
    cid:[email protected]
    This e-mail contains information that may be confidential and/or proprietary. It is intended solely for the addressee. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient of this transmission, any disclosure, copying, use, or distribution of the information included in this e-mail and any attachments is prohibited. If you have received this transmission in error, please notify us by reply e-mail and permanently delete all. Thank you.

  • When purchasing adobe acrobat pro dc how many computers can you install it on?

    when purchasing adobe acrobat pro dc how many computers can you install it on?

    [discussion moved to Acrobat Installation & Update Issues forum]

  • How do I install a purchased adobe acrobat pro XL cd to my windows 7 desktop?

    How do I install a purchased adobe acrobat pro XL cd to my windows 7 desktop?

    Hi Hannah Maddox,
    Please let us know that what kind of trouble are you facing in installing Adobe Acrobat software?
    Regards,
    Rahul Tyagi

  • Need url - to purchase "Adobe Acrobat Pro X v10.0"-Genuine Licence

    Pls can anyone send me a url that I can purchase "Adobe Acrobat Pro X v10.0"-Genuine Licence

    Adobe no longer sell this product. They now sell 11.0, which you can find in the shop on http://www.adobe.com/

  • Adobe acrobat pro 9 keeps telling me "the serial number I entered is not valid"

    I recently had my macbook pro logic board fail and had to purchase a new macbook pro (expensive reinvestment after only 3 years but that's another story).
    Anyway, all of my cs4 upsell products loaded just fine, except adobe acrobat pro 9 keeps telling me "the serial number I entered is not valid." After contacting adobe thru chat several times, here is the info I got back: my serial number IS valid, I still can activate 3 more times (deactivation was not an issue in this case), the final answer was  the cs1 server (my previous version before cs4) is no longer available which basically renders my version of acrobat unusable. Is that really the case? Now that I have a new computer I can't use that software any longer it was working fine on my old laptop? Why did all the other software load okay? Did I miss something or is buying another upgrade neccessary?
    ps: using Macbook Pro with MacOS X.8.5

    Indesign, Illustrator, Photoshop, Dreamweaver are all working just fine. I haven't needed any other apps yet since the reinstall. Install actually worked fine too for Adobe Acrobat Pro 9.0 but when I try to open anything in it I get the Software Setup Screen and it wants me to enter the serial number for the product, when I do it says the serial number is invalid. I included a screen shot below with the serial number removed so you can see. In chatting with adobe, my rep said it is a valid number (obviously since it worked fine on my other apps), but the server for CS1 is no longer available and since I have an upsell from CS1 they cannot offer me support and to take my question to the forum board, so here I am.

  • Using Acrobat Pro X on windows 7.  The replace pages feature does not work.  Is this a known issue? Is there a fix?

    Using Acrobat Pro X on windows 7.  The replace pages feature does not work.  Is this a known issue? Is there a fix?

    Hi Todd,
    I haven't heard other reports of this (though there was an issue quite some time ago where deleting pages on this combination of Acrobat/OS was challenging).
    Can you please tell me what happens when you try to replace pages? Do you get an error message? Are you able to manipulate pages otherwise (delete, extract, and so on)? Is this issue unique to one file, or does it happen with all PDF files?
    I look forward to hearing back from you.
    Best,
    Sara

Maybe you are looking for

  • Very easy question - How to find out the first date of year

    Hi Experts, I have created Web Dynpro program. I have to set one field "start_date" as first date of year. For example if current date is 04/10/2009, then program should set value of field "start_date" as 01/01/2009. If suppose program is used on 12/

  • Output device not listed.

    What if my sound output device not listed? Trying to connect my MacBookPro 17" (mid 2010) to my tv. Video plays. I have connected digital audio cable to both tv n Mac. When I go to sound in system preference (after cord was plugged in) nothing listed

  • Not able to integration process(BPM) objects in ID

    hi, I have created one integration process(BPM) in IR part but I am not able to see it in my ID part. when I tried to import it thru IR its not showing me in list. Please let me know. Thanks, Bhupesh

  • Can't open master templates in FCP

    I have FCP-2 version 2. When I open master templates in FCP all I get are empty frames and nothing in the viewer. Even after rendering everything is black. If I go into motion and create there and click "Save as template" the same problem. So far all

  • ACE Appliance snmp traps

    Hi, I have an Appliance with an Admin context (for management) and a User context (for the Internet-facing VIP's). I can monitor the User context using snmp via the Admin context no problem, but I really want traps from the User context to be forward