I purchased on the 10th January this year, the yearly CC and Lightroom download. The CC downloaded as a 30 day trial. The Lr will not download, the message I get is 'trial expired'. (I downloaded this last year for the 30 dayfree trial). I have uninstal

I purchased on the 10/01/15 the yearly CC and Lightroom download. The CC installed but only as a 30 day trial. I had previously trialled the Lr app, which had expired, yet this would not download as at the end of downloading, the message said 'trial expired' and the only option was to 'buy'/ (which I have on the 12 monthly payment plan). I used the name 'Benjoe9903' on a question a day ago, but cannot access this. How do I find where this is.. I am new to this kind on discussion and am getting really frustrated. Please help

Verify that you signed in to the CC desktop app with the same Adobe ID you used to set up the subscription. If you haven't signed in, or if you signed in with a different Adobe ID, your installed software will not be associated with your subscription and you will get exactly the kinds of message you describe.

Similar Messages

I installed google chrome and added it to my applications folder and it works but my desktop still has the icon of the chrome volume/disk and when i right click it gives an option to eject but it will not delete how can I get rid of it?

I installed google chrome and added it to my applications folder and it works but my desktop still has the icon of the chrome volume/disk and when i right click it gives an option to eject but it will not delete how can I get rid of it?

Drag it to the trash icon in your dock. This is a disk image, and you need to "eject" it, to get rid of it.

My iphone somehow got put in recovery mode, but i didnt have it updated. So i am trying to recover it, but i have to go through update first and the update will not finish. It always gets interrupted half way through..how do i skip the update?

My iphone some how got put in recovery mode, and i hadnt updated it yet and i keep trying to recover it, but it makes me update it first and amost to half way done it gets interrupted..is there any possible way to skip the update? i need my phone and i dont know what to do! Pleeease help me!

There is no way to skip.
Disable any security software on the computer and update the device.

Sound will not export with video in only 3 scenes, but exports fine in other scenes for the most part. In the last scene the audio does export to video, but the this scene is a video that I imported with rolling credits. the rolling credits do not appear

The above title should explain my problem, I have been working on this for a while and I am getting exhausted

Why not post this in the iMove forum area?
http://discussions.apple.com/category.jspa?categoryID=141

My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

Likely this:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

The box indicating that this domain controller is the last controller for the domain is unchecked. However, no other Active Directory domain controllers for that domain can be contacted

I have 2 domain controllers running 2003 server, server1 and server2. I ran dcpromo on server1 and removed AD and removed him from the domain and disconnected from network. I then added a 2012 server
with the same name and IP address server1 with no problem. Replication from sites and services work fine on both controllers.
The new 2012 server1 is GC. I transferred all FSMO roles to server1. Again no problem and replicating using sites and services. AD on server1 is populated correctly.
Now what I had intended on doing was a dcpromo to remove server2 from the domain so I can then add another 2012 server. That is when I get the: "The box indicating that this domain controller is the last controller for the domain
is unchecked. However, no other Active Directory domain controllers for that domain can be contacted.
I have DNS installed on both servers and both look good with replicating there. Strange thing is when on the 2012 server within DNS if I right click and connect to another DNS server I can add server2 just fine but from server2 adding server1 it tells me it
is not available.
Help please!

Hi,
As there is server 2012 DC (SERVER1) DC is operational in a domain then "This domain controller is the last controller for the domain" should be remain unchecked when you demote SERVER2 DC.
If you are getting error "Active Directory domain controllers for that domain can be contacted" while demoting SERVER2 DC then check the DNS pointing on both as per below article, disable windows firewall on all DC, less possiblities but worth to check if both
are different site then check the ports are open on firewall.
http://abhijitw.wordpress.com/2012/03/03/best-practices-for-dns-client-settings-on-domain-controller/
http://technet.microsoft.com/en-us/library/cc766337(v=ws.10).aspx
http://social.technet.microsoft.com/wiki/contents/articles/584.active-directory-replication-over-firewalls.aspx
run “ipconfig /flushdns & ipconfig /registerdns“, restart DNS server and NETLOGON service on each DC and try to demote server2 DC.
If issue reoccurs, post dcdiag /q result.
NOTE: If initial replication was completed between both DC (new 2012 and old DC) then you may remove the server2 DC from Active Directory forcefully (DCPROMO /FORCEREMOVAL) and perform metadata cleanup.
Active Directory Metadata Cleanup
http://abhijitw.wordpress.com/2012/03/03/active-directory-metadata-cleanup/
Best regards,
Abhijit Waikar.
MCSA | MCSA:Messaging | MCITP:SA | MCC:2012
Blog: http://abhijitw.wordpress.com
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

When i open itunes, it gives me a message "the folder itunes is on a locked disk or you do not have write permissions for this folder" i am the only user and it was working a week ago whats wrong with it? it will not open itunes

when i open itunes, it gives me a message "the folder itunes is on a locked disk or you do not have write permissions for this folder" i am the only user and it was working a week ago whats wrong with it? it will not open itunes

Hi lvdmerwe!
I have two articles here for you that should be able to help you troubleshoot this issue further:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

Yes - email & text work fine but when I use something like Google Images or search a blog with imbedded photos I get the empty white boxes with question marks. If I click the question mark it opens the photo but I can't possibly do that for EVERY image on EVERY page I search!?!?! I've rebooted the iPad & my wireless card several times but neither action helped. Have any clue what I should do now?

TS3274 My Air Ipad keeps switching to voice-over, it will not allow me to enter my password. It keeps saying that I've entered the wrong password. It's asking for a password of zero value. How can I correct this.

My Air Ipad keeps switching to voice-over, and it will not allow me to enter my password. It keeps saying that I've entered the wrong password. It's asking for a password of zero value. When I enter my personal password that I created, it say it the wrong password, then it say try again in 5 minutes and shuts itself down. Is anyone else having this issue and how can I fix it?

Hello SharonLo
Your best bet would be to restore your iPad if it is not accepting your passcode. Check out the article below to walk you putting your iPad into recovery mode and using iTunes to restore it.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Regards,
-Norm G.

My macbook pro loads webpages fine for the first few minutes but after that the internet freezes and will not load anymore webpages. What can I do to fix this?

My macbook pro loads webpages fine for the first few minutes but after that the internet freezes and will not load anymore webpages. What can I do to fix this?

I let Firefox sit on my desktop for about five minutes, and it finall allowed me to use it. That is EXTREEEMELY slow. What is the problem?

My iPhone 4s iOS 7.0.4 will not update music or apps from iTunes 11.1.3. this was true of my pc and the new MacPro.

My iphone 4s ios 7/0/4 will not update music or apps from itunes 11.1.3. this was true with my pc since ios 7.0.3 even with update 7.0.4 and now continues with my new MacPro also runing itunes 11.1.3. as most state in previous threads, syncs all non itunes related data with no issue and appears to work correctly on itunes data but then hangs on the last step of updating until it times out. i have tried marking specific music to transfer, setting up new playlist, deleting some old playlist on phone but stopped short of restoring my phone back to new due to the amount of non itunes data that i will lose. The itunes setup on the macpro was completely with the download of all music from a previous external backup and the creation of new playlist - on the first sync with existing phone it did ask to overwrite all phone itunes data with macpro itunes data which i did accept - no different result - no changes on phone.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the problem continues, take the device to Apple for evaluation and possible replacement.

Date of last inventory for the storage bin

Hello,
We would like confirm that when use the T-code LX26 for Carry out Inventory using the Cycle counting method.
Date of last inventory for the storage bin i,e. date when inventory was last taken in the Warehouse number for a any storage bin shows as 00.00.0000(It is not displaying the any date).
Whether this is a System standard behavoiur or Any other reason.
Please guide me waiting for your reply.
Regards
Sarin.

Hi,
Thanks for your reply.
I have checked in the Field,it showing in the Field.
In T-code LX26 if i take a report for entire WM number it show for some of the Old Inventory date for the some of material
You mean to Say bins were not taken into account for the cycle counting.
How it will be,there is any reason for this .
I am waiting for your reply.
Regards
Sridhar

My ipod will not let me use all but like 3 apps fully without closing me out of the app. I have a 2nd generation ipod touch that has IOS 4. Why is this happening and should I take it to an apple store??

My ipod will not let me use all but like 3 apps fully without closing me out of the app and i can only use safari or the app store for about 10 seconds without it shutting down the app. This has been happening for about 6 months after the upgrade to ios 4. Please help, should i take my ipod to an apple store?? It is a ipod 2nd generation itouch with ios 4.

We won't know until you try the procedure. The reset will not affect the content of the iPod.
Stedman

Ipod is disabled for 22,362,812 and will not restore cause it has a password how do i restore this device

ipod is disabled for 22,362,812 and will not let me restore it says there is a passwoed on this device and it needs to be removed. how do i get this device restored

Go into Recovery Mode per the instructions here.
Then, try the Restore. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Simply choose manual "Sync" from the bottom right of iTunes.

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?
My Photoshop says it is up to date, but I am hoping that since this camera just came out, Adobe will have an raw file update soon.

DNG Converter is FREE. Yes, really. No subscription needed.
- Baloney, NOT FREE, it's a proprietary software, not open AT ALL, see Legal Notices, so stop trying to distort the truth here.
Camera Raw (& DNG Converter) 8.7RC has been available since 2nd October, and opens D750 files in Photoshop & Bridge (& Lightroom using DNG Converter).
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs
- Still a cumbersome process for this of us that PAID for software and support, the whole point of this discussion is to implement this directly on LR, so we, the PAYING users don't have to waste time doing a useless process that could be EASILY AVOIDED ig Adobe released updates as they are needed, or if they OPENED THE SOURCE CODE so the community could do it.
Adobe created DNG, which is a well-documented backwards-compatible format, which is free for any manufacturer to use.
See here for manufacturers who do (it's an old list, but you get the idea):
http://www.barrypearson.co.uk/articles/dng/products_cameras.htm
- Really? Did you actually read the site? It has PRECIOUS information that illustrate my point: Adobe DNG is an attempt to stop the OpenSource community from achieving the goals of OpenRaw, which is TRUE OPENNESS, Again, Adobe is trying to get manufacturers to PAY LICENSING so they use a PROPRIETARY FORMAT that will HOLD CUSTOMERS on a PAID platform. OpenRaw is he answer for a true competitive environment.
Ask yourself why other manufacturers don't use a documented backwards-compatible format.
- Easy, because they are lazy and want kick-back. The SAME answer that I (and the entire OS community) would give if you asked about Acrobat or MS Office.
If you use a particular piece of software as your main tool, and you buy a camera which isn't yet supported by it, it's your problem. There is an expression used in the industry:
"Poor Planning on your part does not constitute an Emergency on my part."
- I agree here, it's MY PROBLEM that I decided to have a better product, it was my choice. I can still use OS Tools, which will be what I do moving forward, and about that expression, that is EXACTLY why Adobe will keep loosing customers, because the sense of urgency to help who pays their bills is inexistent. You are correct, why should they rush something so simple to help a customer right? Screw the customer... Thanks for making my point...

My iPad is locked up and has a apple and a bar under it on the screan and it will not turn on or off. Anyone know how to solve this problem?

My iPad is locked up and has a apple and a bar under it on the screen and it will not turn on or off. Anyone know how to solve this problem?

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I purchased on the 10th January this year, the yearly CC and Lightroom download. The CC downloaded as a 30 day trial. The Lr will not download, the message I get is 'trial expired'. (I downloaded this last year for the 30 dayfree trial). I have uninstal

Similar Messages

Maybe you are looking for