I put my mac pro to share with my mac desktop.  Iphoto was upgraded from 8.2.1 and I can no longer access iphoto on the mac book pro. I have tried library manager but that does not work.  Any suggestions?

I have a mac pro which I recently made to share with my mac desktop.  iphoto was updated on the mac pro from 8.2.1 and I can no longer open iphoto.  I get an error message You can’t open your current photo library using this version of iPhoto.  The only option is for me to quit.  I have tried to restore with no luck.  I tried reinstalling using my Application CD.  Help?????

when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
LN

Similar Messages

  • My ipod touch is not turning on, i tried to reset it holding home button   power but that does not work, any idea?

    my ipod touch is not working , i tried to rest it holding the power button and home for a while but that does not help..
    any idea ?

    Connect the iPod to its syncing computer.  Let it charge for 1/2 hour .  If iTunes sees the iPod restore it via iTunes
    Next see if placing the iPod in recovery mode will make it visible in iTunes so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    Also see:
    iPod touch: Hardware troubleshooting

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort  by kind but that does not work. It arranges all folders but not the files in the folder., Is there

    Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort  by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort  by kind but that does not work. It arranges all folders but not the files in the folder.

    Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

  • HT1222 I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!!!!!!

    I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!

    Paldeng, thanks for the suggestion.  I've done all that.  I can connect to the server, but apparently they are not recognizing my ID and password.  I can use the server program if I don't go through Mail (using the same ID and password).  My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do.  His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume).  We can receive email in Mail, we just cannot send.
    I contacted my service provider, and we went over my connections.  They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired.  Apple swears it is not their problem, it is the provider, so here I sit.  My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely.  The thing is, we had not messed with any of those settings, so what changed?  I just did not want to bother my son again, as he has many other demands on his time.
    Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard.  I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update.  Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections?

  • I have a 4th gen iPod touch and I can not connect to the Internet even though my iPad works and my computer let's me get into the Internet. It gives me a message cannot to server. Please help I have tried to reset it but that does not work

    I have a iPod touch 4th gen. And I cannot get into the Internet I get a message that say cannot connect to server. The other computer and my iPad still work with the Internet . I have reeked to reset it but that does not work. Please help me.

    I do not know wat "reeked to reset" means.
    Try the following:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Power off and then on your router.
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • When I try to open Illustrator it opens Adobe Application Manager, but it does not open any window, why does this happens?

    Hi I am trying to open Illustator CC 2014 but it only opens Adobe Application Manager but it does not open any window. It's on a mac. Please help!!

    Hi Henry,
    Can you please also confirm the Mac OSX version?
    Regards,
    Sumit Singh

  • I have an itunes gift card that does not work what should I do?

    I have an itunes gift card that does not work what should I do?

    Give me more details (but don't state the code).

  • Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

    Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

    cor-el,
    I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
    Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
    Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
    Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

  • I am looking to turn my iPad into a portable device to store and view multiple files transferred from my pc. I have tried some apps but it does not support multiple sub folder transfers.  Any suggestions please?

    I am looking to turn my iPad into a portable device to store and view multiple files transferred from my pc. I have tried some apps but it does not support multiple sub folder transfers.  Any suggestions please?

    I use GoodReader on my iPad and use the GoodReaderUSB tool. the GoodReaderUSB tool allows you to transfer entire folders into GoodReader without loosing the folder/file structure.
    Windows: http://www.goodiware.com/usb/GoodReaderUSBWin_200.zip
    Mac: http://www.goodiware.com/usb/GoodReaderUSBMac_202.zip

  • IMessage Beta doesn't work on my home wifi but it does at work, any suggestions why?

    iMessage Beta doesn't work on my home wifi but it does at work, any suggestions why?

    Hi carre13,
    Welcome to the Support Communities!
    The article below may be able to help you troubleshoot your Wi-Fi issue.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398?viewlocale=en_US
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    I hope this information helps ....
    Have a great day!
    - Judy

  • Itunes does not open,everytime i try it says "The itunes application could not be opened. The required folder cannot be found" I have tried the shift key option but that does not work. help!!

    I cannot open itunes. Everytime i try it says "The itunes application could not be opened.The folder cannot be found." I have tried the shift key option but this does not work. Please help.!!

    Try the actions here for that driver.
    iOS: Device not recognized in iTunes for Windows
    I would first do this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • I have adobe reader installed but it does not work

    I have adobe reader installed but it does not work

    What is your operating system?  Reader version?
    What does "not work" mean?

  • How can I get multiple users to be able to share the music on iTunes? I've tried Home Sharing, but it does not work properly.

    How can I get home sharing to work on my mac mini for multiple users? It says it is working, but it never shows up in the left hand column.

    Gino Cerullo,
    Thanks for your response. I tried all that myself. In fact, last night, it all worked fine on all users. This morning, no Home Sharing would show up. It is really weird because some setting must have changed, but I did not knowingly changed anything, and now all the obvious fixes don't work. In fact, if I turn off Home Sharing and turn it back on, then it comes up only until I hit the "done" button on the set up page and then it goes away from the left hand column again. The ADVANCED drop down tab says it is on, but it is not there.
    Thanks anyway.
    Edzell

  • Sybase "Top (n) percent" does not work, any suggestions?

    Hi All,
    I want to select a percentage of records in Sybase. I can only use "SELECT TOP n" to select n rows. If I want to select 100% of the rows in SQL I use "SELECT TOP (100) PERCENT", Sybase does not recognize the syntax.
    Does anyone know if this is possible in Sybase? What is the syntax in Sybase?
    Thank you in advance.
    Regards,
    Reshma
    Please Vote as Helpful if an answer is helpful and/or Please mark Proposed as Answer or Mark As Answer when question is answered

    Try : SELECT TOP 100 PERCENT ...
    and find a right forum to ask question related Sybase. It is not the same product now.

Maybe you are looking for

  • Cisco Aironet AIR-SAP2602I-E-K9 - Setting QoS from CLI...

    Hey guys, I've created a QoS policy from within the GUI. However when trying to apply the policy to all incoming and outgoing interfaces of the VLAN concerned (1000 / CORP) from within the GUI I'm not convinced it is working. I select the policy agai

  • JSF 2.0 and 'Target Unreachable' with nested bean properties

    Hi people, I know that JSF 1.x were not able to created objects for intermediate properties and that it was necessary to create 'y' in 'x.y.z' when 'x' was a managed bean and you wanted to create a new 'y' and set it's 'z'. My question is: does JSF 2

  • Deep linking questions

    I have pages in an app that i want to link to from a non apex site. I want the user to log in to apex app and then automatically go to different pages based on the original link to apex. I also want to pass apex login page a value through the link. T

  • Error message that i get in the installtion

    and cant be solved... maybe some1 here can help me with that problem: "failed to load DLL orawsec11" this i get and "failed to launch app - lsnrctl.exe" what to do? please help.. thanks! and if i open the get started so i get nothing... i get only th

  • How to buffer data when network goes down

    I am not a LabView programmer.  One of the programmers here has written a program which writes data to a network computer.  Unfortunately on occassions where the network has a glitch maybe for a few seconds or even a fraction of a second. the program