I really need help connect with my ipod and my itune??

guys when i pluge my ipot to my computer and open itune it appear on the itune with my computer screen "iTune has detected an ipod that appear to be courrupted. you may need to restore this ipod before it can be used with itunes. you may also try disconnecting and reconnecting the ipod.
i been try those step again again and again still would be same problem. is that mean my ipod is broken? and does the warrarty covered it to fix my ipod for free?

i can't found any ASC in my area and can i took the
ipod back to the stroe where i brought it? also that
i live in californa LA
If you take the iPod back to where you bought it they will probably send it to a ASC but if you want to do it yourself here are some ASC's in your area
http://www.apple.com/buy/locator/index.html?q=91803&submit.x=0&submit.y=0
Q. What if I lost my receipt or proof of purchase?
A. You should check with your reseller, who may be
able to provide a duplicate receipt for you. If you
purchased directly from Apple, go to:
www.apple.com/support/store for a duplicate receipt.
is that true?
I'm not sure about individual store policy but if you bought it from Apple then there will be no error in when it was purchased because you bought it directly from them.
Power Mac G4 (Digital Audio) Mac OS X (10.4.7) 1 GB Ram, Firewire/USB PCI card, Extra 2x 60GB HD

Similar Messages

I need help i lost my ipod and found it but someone elses id is on it i trtied resoring it but i still cant go in it help

i need help i lost my ipod and found it but someone elses id is on it i trtied resoring it but i still cant go in it help

See this -> Find My iPhone Activation Lock: Removing a device from a previous owner’s account

Hi really need help, on my iPhone 4 and iPhone 5 if I call someone and put them on speaker before the calls connected, the call will fail, and refuse to end call any ideas, been back to apple 3 times!

Really need help as both my iPhone 4 and iphone 5 have the same problem, if I call someone using speaker the call never connects, just "hangs". Then when I give up neither phone will end the call! Been back to apple 3 times and all handsets replaced but still no different!

Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

Really need help! with macbook OS X install disc 2

How can I uninstall Mac OS X? because i need an disc 2, which i haven't got and it's the old macbook. Is there any way that i can stop the install? or buy the disc 2? i can't click on anything until i have that disc 2.
If any of you have the answer then please contact me.
because i really need my macbook for school soon
Thank you and god please help me.

Hold the Moyse button down to eject Disc #2 while booting up, at the same time hold the Option/alt key down to have the startup manager pop up, insertt Disc #1 & wait For Disc #1 to show as a boot choice.
That second Disc thing happens frequently, the best way around it is to do a Custom install, and eliminate enough Printer Drivers, Languages, Fonts, and Applications you don't need... then it may skip #2 altogether.
http://support.apple.com/kb/HT1442
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214

Need help urgently with OS X and Windows 7

I need help urgently.
I installed Windows 7 on my macbook pro with OS X Lion. After installing Windows7, I accidently converted the basic volumes to dynamic volumes and now i can't even boot to OS X.
Please help me how to recover my OS X Lion. If I have to delete Windows and bootcamp partitions, it is OK.
I just want to get back my OS X bootable.
Thanks

thihaoo wrote:
Sorry
I can't even see the OS X partition when I hold down the "Option" key.
I could see OS X and Windows partitions if I hold down Option key before changing the partitions to Dynamic partitions from Basic in Windows 7.
Now can't see OS X partiton and only see Winodws partition but when I tried to boot onto Windows7 , I got BSOD and macbook pro restart.
Please help
The usual reason for the OSX partition to be invisible under these circumstances is that it has been trashed by Windows.
Do you have a backup?

I need help badly with my ibook and palm pilot

Good day. I recently fixed my ibook and my palm to sync with each other. I configured my palm to sync with entourage. I then realized that it would be much better that if I sync my palm pilot with the palm desktop. Gow do I now reverse this? How do i cancel entourage to sync with my pal pilot. please advise. need help badly on this. thanks... i just like to feep my files organized and i find it difficult using entourage...my palm pilot is a palm TX...

I also have a Palm handheld. I use iCal and Address Book more than Entourage. This is what I did:
At first, I tried to adapt to Palm Desktop. I didn't like it, so I looked for the *iSync Conduit*. I found it and installed it. Then, I ignored the Palm desktop software (except the HotSync utility) and have used iSync with iCal and Address Book since.
I know that doesn't answer the question about switching from Entourage, but Desktop isn't that great either. iSync is what I recommend.
-NA

Family with multiple iPods and multiple iTunes - can we share songs?

I am sure I am not the only one in this situation. There are 4 computers in our house, and 3 individuals with there own iPods. Can one iPod owner who has her own library on her PC go to my son's PC and connect to his iTunes Library to get just one song that he purchased? She tried to "drag" a song from his library onto her iPod, but it wouldn't allow her to. She got some message saying her iPod already has it's own library. Are you saying she can't get one song that I paid for? How are we able to share songs on multiple PCs?

If you want to connect and use an iPod on more than one computer or with more than one library you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:.
Using iPod with Multiple computers
Managing content manually on iPod and iPhone
Syncing Music to iPod
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod
You might also want to look at this article: iTunes: How to Share Your Music

Cannot get a connection between my iPod and my iTunes

I FINALLY managed to get iTunes installed on my computer(an older version) and now my itunes won't connect to my iPod.
iTunes recommended that I update to version 9, and now I am recieving this error message:
The iPod administrat cannot be used because it requires iTunes version 8.0 or later. visit www.apple.com
now what?

iTunes recommended that I update to version 9, and now I am recieving this error message:
Doublechecking, Dawn. Are you getting your error message after having updated to iTunes 9.0.2.25?

Need help connecting with the internet

i have no clue what to do and why it doesn't work. i have a wireless router but it doens't seen to want to connect to it. i have pick up a linksys adn it worked for a little then fails. can someone plz help me here

Go to the router admin page and turn the MAC filter off. Or, you can manually enter your iPT MAC ID inter the MAC filter list. This will do it.

Please i really need help bad with installation

I bought dreamweaver 8 long time ago worked on my other
computer wit xp, i bought another computer vista in it and
installed dreamweaver all it does is I see the logo and then it
turns off the program, so i tried and downloaded a trial version of
CS4, of course i uninstalled dreamweaver 8, cleaned my registry and
hidden folders and installed it and the same deal i only see the
logo and it shuts off the program, so i downloaded the CS3 same
deal. could anybody plllleeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeease help
me out. whats going on?
i hate frontpage.

What version of Vista are you using?
Also with CS4, if it is not working that is something that
would be better suited for Adobe support since they do support CS4
and Vista.

Need Help Connecting Audigy 2 ZS and DVD Surround Sys

Ok, forgive me if I sound confusing, but I am confused.
Here is what I want to do:
Connect my Protron 5. surround system to my media center PC. The surround system is a DVD player that connects to a sub, which the speakers plug into. Here is a picture in case I confued some of you.
<IMG src="http://www.geocities.com/nish4x/stereo.JPG">
How exactly can I hook this surround system up to my PC? I dont need the DVD player, but I am guessing I need it to connect that to my PC in order for the 5. to work?Message Edited by Nish4x on 0-09-2006 02:26 PM

You need 6 rca cables and an 3 3.5mm stereo to rca adapters.
I suggest you get the rca adpaters from www.impactacoustics.com or wherever you get
the cables to go branded items (they sell their items to dealers under the brand name "cables to go").
For the rca cables www.monoprice.com sells excellent ones for cheap prices, look for the 75 ohm subwoofer cables,
or 75 ohm rca cables.
Connect the 3 adapters to your sounc card and then route the rca plugs into the sound system. Since I also have the audigy 2 zs, which I like the
fact that you have a lot of room to manuever, just plug the rca adapters into the center, green, and black and then put the rca cables into the dvd player. You may need to use the thx setup console to test to see if you plugged in the rca channels to the right ones into the sound system, ie did you put the white rca cable into the front left channel rather than the front right.
Happy hooking it up. If you need more advice, private message me or respond to this forum, be aware thogh with a lot of topics, your forum can get lost/

HT201210 i need help restoring a locked ipod

i need help restoring a locked ipod touch

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

I lost my ipod I really need help to find it. Im from other country and i cant buy another one. Is not connected to internet

I lost my ipod I really need help to find it. Im from other country and i cant buy another one. Is not connected to internet

There is nothing anyone can do.
Sorry.
You will have to keep looking for it

Hi! REALLY REALLY NEED HELP WITH IPOD!

Hi,
I need to know if my ipod is damaged or if this is just a quirk. I have a fifth gen. video ipod. All of the sudden my ipod stopped playing all songs and videos that were purchased from itunes. I have no idea why. I looked up on the internet and it said something about installing the latest version of itunes so I did that. After I did that it then erased everything from my ipod. However, everything that was on my ipod still shows up in itunes when I plug it in like it is all still there, however, nothing shows up on the actual ipod. Is there something wrong with my ipod and how do I fix this??
Thanks so much,
Maria

Check through this thread.
http://discussions.apple.com/thread.jspa?threadID=1250933&tstart=0

I have an iPod Nano 7th generation, and I keep getting an error saying that iTunes could not recognize my device. I have tried nearly everything,except I don't have admin rights on the computer, and really need help.

I've tried a lot to get it to work, even using a new charger and putting it into Disk Mode. I really need help. Can anyone give me some advice? Thanks.

Hi Dawson777,
Thanks for visiting Apple Support Communities.
It sounds like you're receiving the message "An iPod has been detected, but it could not be identified properly" when you connect your iPod nano to your PC. You have tried some good troubleshooting steps already, and you may want to review the additional steps in this article:
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/ts3218
Best Regards,
Jeremy

I really need help connect with my ipod and my itune??

Similar Messages

Maybe you are looking for