I receive a not connected to the internet message several times daily on my iMac connected via airport to a time capsule which accesses the internet via cable modem.. When I input my password to enter network preferences, the connection re-establishes.

I receive a "not connected to the internet message" several times daily on my iMac connected via airport to a time capsule which accesses the internet via a cable modem. Software/firmware is up to date on the iMac (OSX 10.6.8) and Tme Capsule(7.5.2). Browser is Safari 5.1.
When I input my password at the prompt to enter network preferences, all the lights go green (ie... ethernet, ISP etc.) and the connection re-establishes immediately and states "the connection appears to be working normally".
It more of a nuisance than anything and seems to have started ocurring over the past couple of months. I also have a windows XP box also connected to the same cable modem that I never have internet connectivity issues with. I've verified all the physical aspects of the connections and can't see any evidence of any actual drops in the modem logs. I suspect it is just an intermittent communication loss between the Imac and the Time Capsule, but I am not very familiar with Mac equipment yet.
Just wondering if anyone has experienced a similar problem and what you did (if anything) to resolve it?
Thanks.

The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

Similar Messages

The connection between your access point, router, or cable modem and the Internet is broken.

At random points throughout my laptop usage, I randomly disconnect from the internet and receive these 2 messages:
1. The connection between your access point, router, or cable modem and the Internet is broken.
2. The default gateway is not available.
It fixes the issue for a short period of time, but constantly happens. This is really starting to annoy me. I have no problems on any other internet, and other people i live with are connected with no issues to the internet. I have tried a number of solutions
online that has "worked" for others to no success such as resetting the router, fooling around with command prompt, and changing the performance settings to not drop internet when low on power. Does anyone have a solution for my technical problems?
I am running Windows 8.1 on a Lenovo ideapad that is less than a year old. I will be honest I am not a very knowledgeable person when it comes to computers, so please use simplified explanations.

Checked this ?
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/window-networking-troubleshoot-error-the/c130ede9-757e-4224-9ae8-3cceb82eeb74
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

TS3274 How to remove an old iCloud account from my IPad. The account (email) was on my dad's name and he resently change it and now i can't reset or delete his iCloud account without his password. Please advise on the procedure. Thanks.

How to remove an old iCloud account from my IPad. The account (email) was on my dad's name and he resently change it and now i can't reset or delete his iCloud account without his password. Please advise on the procedure. Thanks.

If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must use the previous owner's password to get permission to use the device. If you cannot get the password your father put on the iPad you will never be able to activate the device and no one can help you do it.

Hi, I have imac mac os 10.6.7, I can't access to internet with my ipod touch using my imac airport...what's wrong? my ipod tells me is connected and airport is active...so? what should I do?

Hi,
I have imac mac os 10.6.7, I can't access to internet with my ipod touch using my imac airport...what's wrong? my ipod tells me is connected and airport is active...so? what should I do?

right, figured it out. had to put it in disk mode, then reconnect, then it was recognized, then i restored and put everything back onto it. hope this helps anyone else who has a similar problem

HT204400 Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen

Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help me

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

I have completed a song on the GarageBand app which plays fine. I export it via email and it opens up in iTunes on my PC fine but when you play it there is no sound from the file. Anyone know I am doing wrong please?

I have completed a song on the GarageBand app which plays fine. I export it via email and it opens up in iTunes on my PC fine but when you play it there is no sound from the file. Anyone know I am doing wrong please?

you might need codecs on you pc. i find vlc player and codecs is perfect for music and videos.

The connection between your access point, router, or cable modem and Internet is broken

When I turn on my computer, this problem came out as the title. I don't know why, but it can not connect to the Internet. The Internet is OK, my another computer could connect it. Anyone can solve the problem? Thank you very much!

Hi,
Try to reset the TCP/IP stack go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
How to reset TCP/IP by using the NetShell utility
http://support.microsoft.com/kb/299357
Also you could try to reset winsock to check if it helps.
To do this, follow these steps:
1. Click Start, and in Start Search, type cmd.
2. Right-click the cmd entry that appears in the search results, and then click ‘Run as administrator’. If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
3. At the command prompt, type the following, and then press ENTER:
netsh winsock reset
Then, you should see the following message:
Successfully reset the Winsock Catalog. You must restart the computer in order to complete the reset.
Restart the computer and check if it works fine.
Karen Hu
TechNet Community Support

Network preferences and connections

I use a wireless router to connect to the net via an adsl modem using a pppoe connection.
I have two connections in my network preferences. One is for the direct, hard line connection. The second is for the airport (wireless connection). I only use one at a time.
First question:
The First hard line connection always trys to connect automatically to the net when I don't necessarily want it to. Can I stop this or turn it off?
Second:
When I use the airport wirelessly via Airport (which is always on) it often has problems loading the page and says i am in offline mode. usually refreshing or restarting firefox solves the problem but it can be pretty annoying to have to reload every time. As soon as I turn on my macbook the airport shows it is connected to my corega network (the modem brand). What's the issue?
Thx

You can change the service order so the Airport connects first, but if you have an interface that's enabled it will always try to connect. Two ways to handle this would be to disable the connection when you don't want to use it, or to set up a different "Location" for your different network needs.

Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

I was going to use iExplorer to try to copy Notes from iphone 4 to my iMac but changed my mind. Deleted iExplorer. Now my Mac won't recognize when my iPhone is plugged in. Is iExplorer the problem? How do I fix this?

I was going to use iExplorer to try to copy Notes from iphone 4 to my iMac but changed my mind after downloading iExplorer to my iMac. Deleted iExplorer from my iMac. Now my Mac won't recognize when my iPhone is plugged in. Is iExplorer the problem? How do I fix this?
I am using the Yosemite OS on m

Hi TakesTwo2Tango,
Thanks for using Apple Support Communities. It sounds like you should definitely be seeing a plus sign after tapping Edit, so I would try a couple relatively easy things (closing the Music app, resetting the iPhone):
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
- Ari

I switched my iPod Nano from a PC to my macbook air. The info and iTunes still shows it as a windows device, just want to confirm that is ok. Next issue, which is, as usual, my wrongdoing. When I locked my iPod it used to show the time, pls advise

Hello to my always excellent community who always gives me the right answers. I switched my iPod Nano library from my PC to my new macbook air with the help of an excellent and courteous gentleman. The info on my Ipod and on iTunes still shows my Ipod Nano as a windows device, just want to confirm that is ok. Next issue, which is, as usual, is prob my wrongdoing. When I locked my iPod it used to show the time of day, don't even know how I got it to do that and can't remember if it stopped doing so before or after the swith. Can anyone please advise or help? I hope Thank you and if you do reply, thank you in advance for my lack of tech terms and look at my username

I see that there are a lot of views and no replies, so it's clearly a user issue...SHOCKER!!!
In trying to figure out the above; I stumbled upon the link below which taught me how to change/update my iPod Nano to show Version 1.0.2. Mac rather than the windows version 1.x.xPC it was still showing after I transferred my itunes library from my old pc to my new macbook air......I didn't dowlnload the iPod updater 2006-06-28 for Mac and once I did....whoa!!! I got my calendar and reminders on my nano now it's like a new toy all over again, just follow the steps in the below article, if I can do it, a 2 year old can
http://support.apple.com/kb/HT1339?viewlocale=en_US&locale=en_US

HT1338 Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled" - this is a brand new machine with nothing connected to the USB ports - i've done u

Hi
does anyone know how to fix the message on my iMac:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
This is a brand new machine and did not have anything attached to the USB ports"
Thanks for any help

If you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.

TS2621 Cannot send emails from my iPad hotmail account. I can receive but not send. I get message"unable to send email"

This just started out of the blue today. I get a message saying email cannot be sent.

I have done everything in the link TechMastr suggested. I can not send a hotmail message from any of my I-devices. I thought it might be just my accounts, but tried my husband's device as well. This includes things not connected to wi-fi and on 3G. Could it be hotmail? It is so frustrating.

I have a issue screen recording on my mac with quick time player. I have a 13' MacBook Air and i am able to screen record perfectly. But when I Plug in my head phones in to the port I am not able to record the audio.Only just the screen rec

I would like to know If I will be able to record(using quick time player) both audio and video on my mac with head phones connected
My Mac - OSX Version 10.9.3 , Processor 1.8GHz Intel core i5, Memory 4GB 1600 Mhz DDR3

Hi Sansony,
Welcome to the Apple Support Communities!
I understand you would like to record audio from the headphones you connected to your computer. When recording audio with QuickTime Player, you can choose to use the built-in microphone, an external microphone you’ve connected, or a microphone from a connected Apple display. Please use the following article as a reference.
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
Clicking the triangle icon gives you additional options, such as letting you choose whether to use the built-in microphone on your Mac, an external microphone you've connected to your Mac, a microphone from a connected Apple display, or the option to simply use no microphone at all. The triangle also allows you to adjust the finished quality of your screen recording, select whether or not your mouse clicks are shown during the recording (the pointer is highlighted when you click), and to select what location (on your Mac) to save your screen recording when finished.
Have a great day,
Joe

HT1338 I have just bought a new iMac. I have a notification to download an update to pages and numbers but when i try it says that i cant update the software since you have not owned the major version of the software. I purchased the software when i bough

See the above, any ideas?

Welcome to the Apple Support Communities
The reason of that problem is often an indexing problem. See > http://support.apple.com/kb/TS4236 If you haven't got the OS X partition in the list, see > http://support.apple.com/kb/ht2409
If nothing works, maybe Pages and Numbers are hidden in your Apple ID purchases, so unhide them > http://support.apple.com/kb/HT4928 Then, try to update the apps

I receive a not connected to the internet message several times daily on my iMac connected via airport to a time capsule which accesses the internet via cable modem.. When I input my password to enter network preferences, the connection re-establishes.

Similar Messages

Maybe you are looking for