I receive a Runtime Error when trying to go from Organizer to Editor. It reads: Microsoft Visual C Runtime Error....Runtime Error....Program c:/ (x....

When trying to go from Organizer to Editor, I receive a Ryntime Error. It reads: Microsoft Visual C++ Runtime Error. Runrime Error Program c:\(x....

I kept getting the same error message too! Thank goodness I'm not alone in this!

Similar Messages

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Consistent 8007 error when trying to download from iTunes / App Store on my iMac.

Hi I get a consistent 8007 error when trying to download on my iMac. Yet can download and it works fine via Apple TV. I'm also having issues downloading on the App Store. I've checked the date and time, firewall and everything else seems to be fine. I can't uninstall iTunes as am running OSX 10.8.4 and am not tech confident enough to run this via terminal. Help!

I tried switching off Apple tv and when reconnected after 30 sec. Or so, it continued downloading

Getting ssh_exchane_identity error when trying to login from my machine or a remote one. Already enabled remote login

I updated my system from Snow Leopard to Lion 7.3.1
Wanted to login from remote computer and then enabled the remote login in Preferences/Sharing, but when trying to login I get the error ssh_exchange_identification also if I try to login from my machine with ssh username@localhost.
I tried all what I could find on internet forums, but nothing changed.
Please help!!
Daniela

Hi Linc
here is the output of ssh -vvv localhost
OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011
debug1: Reading configuration data /etc/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to localhost [::1] port 22.
debug1: Connection established.
debug3: Not a RSA1 key file /Users/danielamaurizio/.ssh/id_rsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /Users/danielamaurizio/.ssh/id_rsa type 1
debug1: identity file /Users/danielamaurizio/.ssh/id_rsa-cert type -1
debug1: identity file /Users/danielamaurizio/.ssh/id_dsa type -1
debug1: identity file /Users/danielamaurizio/.ssh/id_dsa-cert type -1
ssh_exchange_identification: Connection closed by remote host
[1]+ Done edit sshd_config
The following line comes from /var/log/secure.log
May 23 04:59:46 <danielamaurizio> sshd[2267]: fatal: /var/empty must be owned by root and not group or world-writable.
but I'm not sure if it's want you asked me; the owner of /var/empty is root of group sys.
By the way I had a problem that Lion cancelled the owner root and I had to use System Preferences User and groups to add root again, with the result that now I can use only the comman "su root" and not "sudo anycommand" anymore.
Thanks for halp and cheers
daniela

Error When Trying to Restore from iTunes Backup

I had to erase and re-install the operating system. I thought I had iTunes covered by burning an iTunes backup to a CD, but when trying to restore iTunes from the CD it will restore a few songs and then give an error message that it was unable to read or write to my hard drive. I looks as though it restored the music that I owned and put on the computer but not the tunes I had purchased from the iTunes store and not the playlists. I did not know enough to burn the /music file. Is there anything I can do to get the burned CD to restore?

Contacts are not part of the backup. They are seperate and either you need to sync them with an email program such as outlook or use icloud mail,contacts, and calendars on the phone. Unless you did that then the contacts are gone.

Error when trying to scan from my HP DeskJet 3050 J610 (com.apple.ImageCaptureCore -9929.)

When trying to use my HP DeskJet 3050 J610 series I get an error (com.apple.ImageCaptureCore -9929.) It can't scan. Anyone know how to fix it?

The error is ICReturnScannerFailedToSelectFunctionalUnit, but I am not sure what that means. Is there an HP disgnostic available? Are the drivers current? Maybe HP has some experience with this error.

Error when Trying to Upgrade from 8.1.7.4 to 10.2.0.3

Hello -
I am getting this error, when attempting to run the ultu102i script in preparation for an upgrade to 10g:
SQL> @utlu102i
DECLARE
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 1560
I have upgraded many databases to 10g from 8i, and have never seen this error before. I have the database started as 8i, and my environment set up as 8i (ORACLE_HOME, etc), and then I try to run teh utlu102i script that is within the /rdbms/admin directory of the 10g software home location.
Any ideas are greatly appreciated.
Thanks!

edit the utlu102i and utl102x.sql scripts and comment out the following two statements.
SELECT value INTO db_undo FROM v$parameter
WHERE name = 'undo_management';
SELECT value INTO db_undo_tbs FROM v$parameter
WHERE name = 'undo_tablespace';
this ones in metalink, i came accross it when upgrading to 10.2.0.3 i think its a new bug in this pathcset.
metalink noteid is: 407031.1
Message was edited by:
chris_c

Why am i getting an error when trying to upgrade from 10.7.5 to 10.9

when i try and upgrade from 10.7.5 osx lion to 10.9 i get an error, i have 2GB of memory and 144MB of storage. can someone help?

This would indicate that your MacBook Air does not meet the requirements for Mavericks.
To install Mavericks, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory
8 GB or more of available space

BlackBerry Desktop Software error when trying to run from my computer desktop

Hi: I have installed the BlackBerry Desltop Software ver 6.0 on my Dell Dimension 4700 PC @3.4 GHz which runs Windows XP Professional Version 2002 with Service Pack 3 and has 1GB of RAM.
Each time I have tried to start the software from the desktop icon, I receive an error message saying that BlackBerry Desktop Software has encountered a problem and need to close.
Has anyone else encountered this problem and if so, how did you resolve it? Any assistacne would be most appreciated as I wish to synch my Torch with Outlook 2003 for contacts and appointments!!
Thanks

Hello,
I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista/Win7, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
Some have reported that there are more registry keys to remove than are discussed in that KB
Others have reported the use of a registry cleansing tool to also be helpful
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchronizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
7) Start the organizer configuration over:
KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I keep getting the error: "lightroom could not import this catalog because of an unknown error" when trying to import from a catalog?

I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
I then tried exporting the needed photos to a new Catalog and that worked. But then when I try to import them again from my Master *+ Catalog I get the same error again!!
I also tried creating a new Master *+ Catalog and tried to import the Catalogs of each year into it and the same error happened again!!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

This is a duplicate thread - see here

How to solve the error: "lightroom could not import this catalog because of an unknown error" when trying to "import from catalog"?

I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

OK, my starting point is that LR can happily contain 400000+ photos, and it's a mistake to create a 1 star plus catalogue as you suggest. Instead, I'd recommend you create a master catalogue of all your photos, which you can then query however you want - 2 star, or a certain keyword, or with "xyz" in the title etc.
If you are intent on going that way, you could try a slight change from what you've done so far. Instead of trying to import an entire catalogue and then delete no-star pictures, take the 2014 and 2012 catalogues and select only the 1 star photos. Then do an Export as Catalog for these items, and import the 2014-1star and 2012-1star into your new catalogue. That may get you past the problem images which I suspect are the problem.
If that doesn't work, or if you follow my initial advice, you're going to need to identify the image where the failure occurs. You may have a corrupt image file, and replacing it from your backup may be sufficient to resolve the problem. Alternatively, it may be a corrupt record in the catalogue, and in this case it may be sufficient to remove the image from the catalogue and import it again. You might try selecting everything in the 2014 catalogue and seeing if you can do an Export as Catalog, creating a clean 2014, and deleting 2014's previews folder might also get rid of a potential problem. Something else is to try the Export as Catalog for images 1-40000, then a second Export as Catalog for images 40002-50k.
So a few things you'll need to try, rather than a magic bullet, and a recommendation to change the underlying direction.
John

[SOLVED]Error when trying to boot from a usb drive

I have installed arch linux on a usb drive.
When I am trying to load it , I get the following error :
ERROR: '/dev/disk/by-label/ARCH_201211' device did not show up after 30 seconds
Any ideas?
Thank you.
Last edited by skiabox (2012-11-16 19:55:10)

Use a BitTorrent client instead of a ddl (direct download link). This way it's less prone to errors, because it's checked while it's being downloaded.
Either that, or check its MD5 against the one from the Download page.
There's also this: https://wiki.archlinux.org/index.php/Be … ion_medium
Note: The quality of optical drives and the discs themselves varies greatly. Generally, using a slow burn speed is recommended for reliable burns. If you are experiencing unexpected behaviour from the disc, try burning at the lowest speed supported by your burner.
Last edited by DSpider (2012-11-16 15:13:55)

Error when trying to restore from backup

I just received an iPod replacement and when I go to restore from backup it gives me an error. The photos are restored but no music or video. Any suggestions? Thanks

lllaass wrote:
If they are not in the iTunes library they can be synced to the iPod.
They CANNOT be synced to the iPod.
B-rock

FDM Error When Trying To Login from the Web

Hello,
We are on FDM 11.1.2.1 and all of a sudden this problem popped up and we're not entirely sure how to fix. When users go to the FDM URL they get the following three error messages:
1 of 3 Error: Primary Load Balance Server is unavailable -- attempting to use Backup Load Balance Server.
2 of 3 Error: Error retrieving security agent header.
Detail: InnerException1: Please run the Load Balance Config Manager and specify a username and password for DCOM.
InnerException2: Retrieving the COM class factory for component with CLSID {E652643D-6CC1-48AC-915D-01842B04F292} failed due to the following error: 80070005.
3 of 3 Error: Please run the Load Balance Config Manager and specify a username and password for DCOM.
Detail: InnerException1: Retrieving the COM class factory for component with CLSID {E652643D-6CC1-48AC-915D-01842B04F292} failed due to the following error: 80070005.
When logging in through the workbench we do not receive any error messages. Does anyone have any thoughts on what would cause this or how we can fix? Is it as simple as inputting the service account credentials again? Also, how do we prevent this from happening again in the future?
Thank you,
Jason

Check the FDM Load Balance Server DCOM Object {E652643D-6CC1-48AC-915D-01842B04F292} Security Tab. Verify that the only user accounts listed is the FDM Service Account and the only Groups listed as Everyone and SYSTEM. If there are any other user accounts listed, remove them from the list. This should be performed for "Launch and Activation Permissions" and "Access Permissions", Do not adjust "Configuration permisions".
Once you do this, re-set IIS by opening a command prompt and typing iisreset and hit enter. This will recycle the IIS Services.
Re-launch FDM.

Shared Services - HTTP 403 error when trying to access from user's PC

We recently upgraded to Shared Services 9.3.1. We can get into the User Mgt Console when remoted into the Shared Services server; however, when I try to access the URL from my PC, I get an HTTP 403 error. I have confirmed in my Internet Options/Security that I have the Shared Services server as a trusted site. From looking at the error closer, it appears that it finds the website, but the website denies my computer access. If I remote into one of our other Hyperion servers and use the Shared Services URL, it works fine. What do we need to change so that the Hyperion admins can access the Shared Services URL from their own PC w/o having to remote into the servers?
Terri

I never tried using the IP address until just a few minutes ago and I still got the HTTP 403 error.
I also just tried using Mozilla and got the following error:
The Server is not able to service this request: [Server:002621]Connection rejected, the server license allows connections from only 5 unique IP addresses.
When we upgraded from Shared Services 9.2.0.2 to 9.3.1, we also upgraded BEA WebLogic from 8.1.4 to 9.2. We did not have this issue when using 8.1.4.
Thanks for your help!
Terri

I receive a Runtime Error when trying to go from Organizer to Editor. It reads: Microsoft Visual C Runtime Error....Runtime Error....Program c:/ (x....

Similar Messages

Maybe you are looking for