I receive email from a business but the From box contains my friends name and email address. The business has no clue why this is happening. How do I fix this?
This only happens with this business. No other email has this problem.
''Zenos [[#answer-671940|said]]''
<blockquote>
I suspect that activenetwork.com is the actual provisioner of the email service used by cornerstoneonline.com and there is a misconfigured server or MX record somewhere that is failing to substitute the appropriate ''from:'' address.
The ''reply-to:'' looks like a ham-fisted attempt to get replies to go back to the preferred account, but they don't help you as all the ''from:'' addresses are incorrect.
Now, cornerstoneonline.com appears to be a church-related organization:
Domain Name: CORNERSTONEONLINE.COM
Registrar WHOIS Server: whois.godaddy.com
Registrar URL: http://www.godaddy.com
Admin Organization: Cornerstone Christian Fellowshiip
(from their whois record)
and activenetworks.com provides "software for the unique needs of your church"
http://www.fellowshipone.com/features
So it would appear that cornerstone buy some services from activenetworks, (including email) and this appears in the originating address. Ideally it would be aliased to an email address on the cornerstoneonline.com domain.
I suspect that someone at cornerstone has misconfigured settings at godaddy.com, from whence they appear to purchased the cornerstoneonline.com domain.
</blockquote>
Thanks Zenos, I'll notify them about the information you gave me.
Similar Messages
-
My iPhone is in recovery mode, But once it's done with the process a tab comes up saying there was something wrong restoring it (1015) error. Any suggestions of how I could fix this?
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
In other words:
The backup to which you're trying to restore was created with a lower or previos version of iOS than the one installed on your iPhone during the recovery. If this is the case then you'll be unable to restore your phone with that backup and you'll have to set your iPhone up as new. Or,
Your iPhone was/is jailbroken. If this is the case, there is nothing anyone here or at Apple can do for you. -
Updating iphone 4 to iOS 5 - while doing the Backup I receive an error message no 402636788 - backup has failed. Can anybody tell me what this means or how I can fix this?
I am working on a Win 7 Machine and I have disabled all Firewall and Antivirus Tasks as this caused problems on an other update.Well - I synced before - that was successful - but I am a bit scared to ignore this error and just to continue? You think I should ignore that?
-
I have updated both my iphone 4G and my husbands 4G with the nAew 5 update but now have his contacts on my phone and everytime he downloads an app it goes on my phone. How can I change this? Do I have to have two separate Apple ID's
Try this
http://support.apple.com/kb/ht1495
Hope it helps. -
The APP update request came for 4 apps. I submitted update all, but the system is stuck and will not update. Further, I cannot use those apps. How do I fix this?
Two other things to try -
Power your iPad off for a minute and then back on again.
Double tap the Home button, locate the updating apps (one by one) in the bottom task bar, press on it until the red minus sign comes up and click it. Repeat for the remaining apps. Try the updates again but do them one by one rather than Update All. -
My Itunes app on my Windows 7 pc will not open. It gives me a message saying my computer is missing 'javaScriptcore.dll'. I've downloaded Java to the computer and restarted it but I'm still getting this message. How do I fix this problem?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
For some reason when I plug my ipod into my comp itunes freezes but my ipod says it is plugged and when I plug it into a different comp it works. How can I fix this?
Setesh, See if both computer has the same version of iTunes, if both are the same, then it is your PC, that has plug-ins which is in conflict it iTunes. ( normally it is the Antivirus or some plug-ins to beautify your screen)
If it is different, most likely the other PC has an older version of iTunes, so you should downgrade your iTunes to that older version, which your iPod interface well with.
Other probable causes,
you are using the USB 1.1 port at the front of your PC, and not the USB2,0 port at the back of your PC. so switch to the back.
Dont use any other USB devices, when you are syncing the iPod.
Dont use any USH Hub.
Have a nice day! -
Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage. How can one fix this problem? It works on the iPhone.
It takes two to tango, maybe it's your recipient that has weak Internet/Cellular connections.
-
can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?
Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
I have taken over 9999 pictures with my phone and it is now creating duplicate names for the pictures starting back at 0001 making it difficult to manually upload my photos like i always have. How do i fix this?
(I tried to just write this as a reply to someone who had already asked the question whos problem was magically solved after posting the question and the site was not allowing me to post to it so here I am)Additionally, when I try to sort the photos by date to easily extract the newest photos which I have not yet uploaded, it is unable to put them in correct order regardless of the fact that the date is correct. Only the videos end up in chronological order for some reason while the photos stay in order by name.
-
I have a 4th gen iPad and the type face on the keyboard has been replaced with small squares. How do I fix this?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Cheers, Tom -
i was trying to update/restore my ipod and now i plug it in and it stays frozen on the usb to itunes picture. and when i plug it in it dosnt come up in itunes how do i fix this? any suggestions are appreciated
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hi
What is the PACKAGING (box it comes in) weight and dimensions for the 3rd generation Apple TV?
Thanks
CTVThe clear thing is a stand. The white thing is the dock adapter.
The stand can be seen in use here:
http://www.silvermac.com/wp-content/uploads/2007/10/ipod_touch.jpg -
The Wi-Fi and Bluetooth on IPhone 4s will not toggle on or off. How do I fix this?
http://support.apple.com/kb/TS1559
-
My phone keeps flashing the apple icon and going to a black screen. It will not reset. How do I fix this?
also have this problem. will not reset. checked power cord, it charges other phone.
Maybe you are looking for
-
Socket read error: connection reset by peer
Hi. Has anybody experienced the error message �Socket read error: connection reset by peer� Please see below for detailed information. Appreciate your help Regards RT Enviroment specification Server: HP/UX 11.00 64-bit, Oracle RDBMS 8.1.6.0.0 64-bit
-
JSF 2.0 Beta1, simple example, doesn't work, why?
I made a simple JSF 2.0 NetBeans (Web Application project) example. Only imported library jars are jsf-api.jar and jsf-impl.jar from mojarra-2.0.0-Beta1 release. These are files which I added: web.xml: <?xml version="1.0" encoding="UTF-8"?> <web-app
-
Profit Center wise G/L Account balance Display
Hi, I m unable to find Standard Report Profit Center wise G/L Account balance Display (for ref.: FS10N)... when i m creating it's Z report, facing some problems like period showing 16 instead of 9 and other's... please let me know what can i do... th
-
Cost Center,Profit Center & Cost element report on 0COOM_C02 error
Hi, I developed a report in BW on 0COOM_C02 (Business Content ) cube on Profit Center,Cost Center & Cost Element as Hirerachy ....but the some values in BW report doesn't match with that of R/3 report Where was i missing.... I updated all the Hirer
-
How to make my java bean internationalization?
hi, I have a project on tomcat. I have rewrite my jsp to multi-language according to user's browse language setting. User's language is English, the jsp shows them English. User's language is Chinese, the jsp shows them Chinese, and so on. But in my