I recently downloaded a movie with an avi extension, I changed it to .m4v and then tried to import it into iTunes but never goes through the importing process and it never shows up.
I recently downloaded a movie with an avi extension, I changed it to .m4v and then tried to import it into iTunes but never goes through the importing process and it never shows up.
That WON'T convert it.
If I do the same with an MP3 and change the extension to JPG, it DOESN'T make it a picture. It makes it unusable.
Change it back to AVI and download "Handbrake". http://handbrake.fr/
Use HandBrake to "convert" it to M4V.
Similar Messages
-
my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
My ipad is disabled and it tells me to connect to itunes. However, once I've connected to iTUNES, it ask me for my passcode and of course, I can't put that in because my ipad is disabled. I am ready to throw this iPad out the window. Wll never buy another one.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost -
when I download the new itunes (on my pc); going through the dowload process it stop me and a window pops up and it says: (there is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.)
I have tried several times to redownload and keep getting the same message. what am I doing wrong...Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
My brother gave me his old iphone when the touch screen went out on mine. It's in great shape but when I received it, it says that it needs to be connected to itunes to be restored. I have done this and it goes through the whole process then says iphone "iphone" could not be restored. unknown error code (-1). There is not a -1 code on the list and I have tried most of the suggestions.
Does my sim card need to be in when I am doing this? And any other suggestions?I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.
-
My ipod was updating overnight. I woke up to find the screen frozen with the itunes logo and the usb charger. I've tried hooking it up to itunes but it says I need to restore and update but I've tried to do that and it won't. What should I do?
- Try placing the iPod in Recovery Mode and restoring via iTunes
- Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I have an IPOD classic with 80MB of music. I am trying to reinstall library from a new PC. it goes through the synch process but I get an error message for most of the content. Library plays on the pc under Itunes fine?
Disable the Convert higher bit rate songs to 128 kbps AAC option from under the iPod's Summary tab in iTunes and see if that helps.
B-rock -
I'm running Lion on a Late 2008 MacBook Air.
With no other applications running, I can no longer Check for Software Updates. It gets about half way through the checking process and then freezes.
The MBA passes Disk Utility. Thoughts?
Thanks
Jim TaylorHow long do you leave it?
Mine can sometimes sit for quite a while (maybe 10 minutes??) before it finally finishes.
You could look at the relevant logs via Console (Utilities folder) to see if Software Update is complaining about anything.
charlie -
does anybody know how i can sort this out? ive got enough memory in the laptop for the 10.5 download
Yes i've tried all of that. I've turned it all the way on and off and erased all of my music and put it back on and nothing works. And with the breaking up CDs and putting into compilation categories i have already fixed all of that stuff. It's fine it just doesn't show up in the list of artists. I can find the album in the songs category and the albums category it's just it doesn't show tha name of the artist. All of the other albums that i downloaded before i updated my itunes to th most recent update are fine. It's just the two that i downloaded afterwards. Thanks for trying though.
-
I am using iMovie and can't seem to complete a render of a completed project through the sharing/media browser. Trying to create a medium size movie that I can then access in iDVD to burn a DVD.
But each time I try, iMovie quits on me about halfway through the rendering process.
I have successfully used media browser to create other movies, but now it doesn't work.
Anybody know of any fixes or troubleshooting?
Thanks.
Stuart Schwartz
[email protected]When trying to troubleshoot my problem I discovered a forum that was saying certain NTFS drives work just fine
Apple support says that an NTFS or exFAT drive cannot be used when connected to the AirPort Extreme.
I suppose it is possible that someone might have been using some type of special software on the drive that might perform a "conversion", but without more details, it is hard to know.
Note: ExFAT and NTFS formats aren't supported.
http://support.apple.com/kb/HT2426 -
I had two tool bars with google search in the header part . Cannot delete them even if I delete firefox and relaod. Am not sure where any other details I have could be stored that I haven't found. I now assume it is on the firefox web site. I just want to download a clean (new) copy of firefox and none of the stuff I had as add ons in the one I have just deleted (twice because it will not disappear so there are files somewhere I can't find. Please tell me how to get a clean version with no old stuff from previous load.
You can uninstall the relevant extensions from Tools>Addons to remove those toolbars. Also there may be some unwanted plugins which you may want to disable. This should solve your problems.
If you still want a clean profile, uninstall firefox with the "Remove my Firefox personal data and customizations" checkbox enabled. Alternatively you may remove your firefox profile folder which (on Window7) is stored in C:\Users\<your-username>\AppData\Roaming\Mozilla\Firefox\Profiles folder with a randomly name. You may delete this folder before installing a new version to get a clean profile. -
.
fighter19lisa wrote:
that only makes it say its synced, when its not.
No, it does not. It transfers purchases from the iDevice to the computer. The computer must be authorized for the Apple ID that the content was acquired with.
fighter19lisa wrote:
my playlists wont show up on the phone.
Are they selected to sync? Is Manually Manage content on the device selected?
fighter19lisa wrote:
i had to change my password for my aol account again and i still cannot get my email on my phone to even work
What does that have to do with syncing content to the device? FYI, nothing. -
I recently chenged my email address on Itunes. When I plugged in my Ipod 4th generation Itouch, it still shows my old email address.
It syncs everytime, but the old email address is keeping me from making other purchases. How do I fix this?In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)
-
Hello
As far as I know, iTunes will still not change anything until you click on Apply in the lower right corner. I fiddle with my settings all the time - just so I can get a sense if what to expect should I make any changes - and I have never seen anything happen to my configuration unless I click on Apply in the lower right corner of iTunes. Not only that - you have turned off auto sync so as far as I know you still have to click on sync or apply in order for the iPad to sync with iTunes.
That doesn't mean it will not happen, I've never seen it happen - is all that I'm saying. I'm sorry but I'm not sure what will happen, but the only reason that I can of why the apps will not transfer is because of the manual manage setting. I could be wrong about that as well.
Look at this discussion - which I have referred quite a few users to read. I know this process has worked for a number of people that have read it and used the instructions in it. Maybe we are missing something - what that would be - I'm not quite sure, but take a look.
https://discussions.apple.com/thread/3305461 -
IPad2 still showing iTunes even when going through the restore iPad button
Even after clicking on restore iPad I am still getting the following:
The iPad "iPad" could not be restored. An unknown error has occurred (1).
Any help would be appreciated.http://support.apple.com/kb/TS3694#1
https://discussions.apple.com/thread/3393959?tstart=0
more
https://www.google.dk/webhp?sourceid=chrome-instant&ion=1&espv=2&es_th=1&ie=UTF- 8#q=ipad%20restore%20error%201
Maybe you are looking for
-
Page break issue with subform AddInstance
I would like the table on page 4 of this form --- http://www.tahc.state.tx.us/10-09_TrichomoniasisEpiInvestigation.pdf --- to be allowed to break across a page if necessary. I want the button on that page to add another instance of the table at the t
-
Hi All, We loaded up our custoemr opening balances and we we used a load GL A/c and went live .now in live production system, when we receive the customer payment,how do we make the load a/c zero? cuz customer payment should go into c
-
Moving Avg Price - Delivery costs
Hi, Will the moving average price be influenced by the delivery costs incurred. It will be helpful if anyone could explain me with an example. Thanks Aparna
-
No sound during gameplay NFS Rivals
I have a HP Envy 15 J049TX. While playing NFS Rivals i do not get any in game sounds. The peculiar thing is I get sound for every other application I have on my system. I tried unistalling the game and installing it again, updated my directx and even
-
LabVIEW stores booleans as a U8 in memory according to the article. http://zone.ni.com/reference/en-XX/help/371361J-01/lvconcepts/how_labview_stores_data_in_memory/ My question is what happens when you develop in FPGA? Specifically if I made 8 lookup