I recently downloaded the updated itunes and not everything shows up. My operating systems is Windows 7 and graphics is AMD Radeon 6530D. Is there a fix for this?

I recently downloaded Itunes and it does not display correctly. I have an AMD Radeon 6530D graphics card with Windows 7. Is there a fix for this?

Hi McNinch9573,
Welcome to the Support Communities!  Are you asking about the iTunes Movie Trailers?  Are you able to play any of the trailers on this site?
iTunes Movie Trailers
Installing QuickTime Player 7 - Apple Support
http://support.apple.com/en-is/HT201288
If you work with older media types or have a legacy media workflow, then you can install the QuickTime Player 7 application on Mac OS X Snow Leopard and later.
Compatibility
OS X includes QuickTime Player (version 10.x) which handles most media playback needs. Only Install QuickTime Player 7 if you work with older media types, have legacy workflows that are not supported by the newer QuickTime Player application, or need to use your QuickTime 7 Pro registration key.
QuickTime Player 7 version 7.6.6 works with the following OS X releases:
Snow Leopard
Lion
Mountain Lion
Mavericks
Installing QuickTime Player 7
Choose your OS X version from the list below for information on how to install QuickTime Player 7.
Lion, Mountain Lion or Mavericks
Download QuickTime Player 7 from here.
Double-click "QuickTimePlayer7.6.6_SnowLeopard".
Note: This download is compatible with Mac OS X v10.6 or later.
QuickTime Player 7 will be installed in your Utilities folder.
I hope this information helps ....
- Judy

Similar Messages

  • I downloaded Lion onto my Mac, and now cannot open or access any of my Microsoft word documents or Power Points. Is there a fix for this? I need my documents

    I downloaded Lion onto my Mac, and now cannot open or access any of my Microsoft word documents or Power Points. Is there a fix for this? I need my documents

    If it's because you were using Office 2004, the eight year old version of Office that was written when Intel processors were not used in Macs, then there will be no fix. Lion dropped support for PowerPC applications, as has been widely reported since Lion's release last August.
    You can upgrade Office 2004 to Office 2008 or Office 2011. You can use iWorks 2009 that can open Microsoft files. You can use a number of free applications that are also capable of working with Microsoft documents. You can go back to Snow Leopard, if you have a backup. Or, if you have an external drive or room to add a partition to your current drive, you can install Snow Leopard on it.
    Search these forums for more information. If this is your issue, it's been posted and answered several times a day since August 2011.

  • Since I updated Firefox with the current version 10.0, my browser now scrolls 3 lines instead of 1 with my down arrow. Is there a fix for this?

    I am running Windows Vista Home Premium, 32 bit, kept updated to current, and Firefox 10.0 updated to current version. When I applied this new update, the browser started scrolling 3 lines instead of 1 when I hit the down arrow. Please advise if there is a fix in the works for this problem. Thanks.
    Maggiemod

    That seems to be a change in Firefox 10 and later.<br />
    I've seen more posts about this new "feature, but I don't know of a way to revert it to one line.
    Firefox 10 has changed to scroll amount for the keyboard navigation UP and DOWN keys to 3 lines.
    You can set the scroll amount for the mouse wheel via mousewheel prefs on the about:config page, but you can't do that for the keyboard navigation keys.
    *http://kb.mozillazine.org/about:config
    There are extension that work both for the mouse and the keyboard to set the scroll amount, but they can only be set to scroll an amount of pixels and not to scroll one line regardless of font-size (height) of the text.
    * SmoothWheel: https://addons.mozilla.org/firefox/addon/smoothwheel/
    * Yet Another Smooth Scrolling: https://addons.mozilla.org/firefox/addon/yet-another-smooth-scrolling/

  • Itunes will not sync with ipod classic. operating system is windows 7. anyone else have the same problem?

    I tried Sharepod, and that did not help. Neither did running a command to check it.  Help!

    I think i have the same problem: https://discussions.apple.com/thread/3250161?tstart=0
    I've been searching online but no answer. I've also lost my receipt >.<

  • I recently downloaded the latest iTunes update and now my menus are in Korean. I work in Korea but want my menus in English. I've never had this problem with updates before. How can I get English back? Thank you.

    I recently downloaded the latest iTunes for Windows update, and now when I open iTunes my menus are in Korean. I live and work in Korea but want my menus in English like they always have been. I've never had this problem with updates before. How can I get English back? I'll appreciate any help.

    CTRL+, (Comma) brings up preferences
    General is the tab on the left
    Language is the last drop down control
    English (UK) & English (US) are 9th and 10th on the list
    Close iTunes & reopen to effect the change
    tt2

  • The update "iTunes" could not be verified and expanded correctly.

    Hi all,
    I was tryng to upgrade to the latest version of iTunes and I got this message
    *The update "iTunes" could not be verified and expanded correctly.*
    *It also says: Make sure you have permission to write*
    *to /tmp/501/TemporaryItems.com.apple.SoftwareUpdate, then try again.*
    Any ideas what that means?
    Thanks,
    Anarie

    http://docs.info.apple.com/article.html?artnum=106712

  • I just recently downloaded the free trial of LIghtroom 5. One day i was using it and it was on my desktop and the next day it was gone, almost like it crashed and will not let me re-install. Please help

    I just recently downloaded the free trial of LIghtroom 5. One day i was using it and it was on my desktop and the next day it was gone, almost like it crashed and will not let me re-install. Please help

    Scrappy1 what do you mean exactly by doing a scan?
    Under Windows 7 you will want to use the Programs and Features Control Panel to remove your installation.  I would recommend verifying that Photoshop Lightroom is removed from the list of installed applications.

  • Recent iOS update has made my iPad 2 unusable. The screen locks up. It's very laggy and web pages do not load correctly.  Is there a fix for this or are they even working on a fix.

    Recent iOS update has made my iPad 2 unusable. The screen locks up. It's very laggy and web pages do not load correctly.  Is there a fix for this or are they even working on a fix.

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • Just recently update my Apple TV and iTunes, every time now I turn on my Apple TV, I have to go to my computer and close and reopen Itunes several times before my Photos share to the Apple TV.  Is there a fix for this??

    I just recently updated my Apple TV and iTunes, and now every time I turn on my Apple TV, I have to go to my computer and close and reopen Itunes several times before my Photos share to the Apple TV.  Is there a fix for this??

    This indicates the device is in recovery mode.
    Connect it to a computer running iTunes and restore it.

  • I recently updated my Mid 2007 iMac with the latest OS 10.8.5 now my external hard drives will not show up. They show up when I boot them up on a machine running and earlier OS. Is there a fix for this?

    I recently updated my 20-inch, Mid 2007 iMac with the latest OS 10.8.5 now my external hard drives will not show up. They show up when I boot them up on a machine running and earlier OS. Is there a fix for this?

    Can you see them in Disk Utility?
    If so, can you select and Mount them?
    If not, disconnect them, reset the iMac's SMC and then reconnect them.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    If you still can not see them, connect them back up to the iMac running the older OS, open Disk Utility and look to see how they are partitioned and formatted.

  • I am trying to download the new Itunes but get a message saying I need 10.6 version and I only have 10.5.  How do I download 10.6?

    I am trying to download the new Itunes but get a message saying I need 10.6 version and I only have 10.5.  How do I download 10.6?

    10.5 to 10.6 is not an update, it's an upgrade. http://support.apple.com/kb/HT1444
    Buy 10.6: http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

  • After I downloaded the update of iOS 8.1.3,I was unable to install it and I see "an error occurred installing iOS 8.1.3"what can I do?

    After I downloaded the update of iOS 8.1.3,I was unable to install it and I see "an error occurred installing iOS 8.1.3"what can I do?

    Hi Josephineapo,
    If you are trying to update your iPhone over-the-air rather than through iTunes, and you are having issues with installing it, then I'd like you to please follow the steps outlined below.
    If you get a message that "an error occurred downloading iOS," try again later. If the issue persists, try updating your device in another network or use iTunes to update your device. Learn more about iOS updates.
    Update does not complete
    If you're installing the update and the progress bar appears to move slowly, be patient. The time an update takes depends on the size of the update and the number of files on the device.
    When you're updating over the air, keep your device connected to a power source so that it doesn't run out of power. If your device does run out of power, connect it to a power source and turn on the device to let the update or restore complete.
    If the update never completes and the progress bar hasn't moved for an extended time, try restarting your device. If you still see the issue after you restart, see what to do if your device appears frozen or won't start.
    Resolve issues with an over-the-air iOS update - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • HT201263 I downloaded the update, but when it was restoring, it was unable to do so and my phone is now stuck at the Apple Logo. What do I do?

    I downloaded the update, but when it was restoring, it was unable to do so and my phone is now stuck at the Apple Logo.
    It used to show the iTunes and USB but now it's just the Apple Logo, and no matter what I do, it won't show the device on my iTunes. What is wrong with it and what should I do?

    Try Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    But... if the Device has been Modified... this will Not necessarily work.

  • HT4623 I downloaded the update but it not installing it keep saying update is Unavailable at this time

    I downloaded the update but it not installing it keep saying update is Unavailable at this time

    Backup your device in iTunes first.  After backup disconnect the device.  On the device for to Setting > General > Update and launch the update there.  Make sue you have it plugged into some power.  iTunes seems to be having some issues with the update.  I have update two iPhones and two iPads this way.
    Good luck!!

  • I recently downloaded the new iTunes version. Why doesn't my new uploaded music appear in the "My Music" playlist?

    I recently downloaded the new iTunes version. Why doesn't my new uploaded music appear in the top of the "Music" playlist?

    First see if Finder Preferences has the box checked for... show CD, DVD, iPods checked.
    Sometimes dirty DVDs won't read, mine is ery particular about smudges and scratches.
    Try a SMC Reset:
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    It is the 5 second timing that initiates the reset.

Maybe you are looking for

  • Looking for a good music player app

    Hi. I have a problem. i'm looking for a good music player app for my new iphone (which i will buy my next month) in terms of playing music. after having 3 phones in the last 9 months i'm still unhappy. Had a Samsung Galaxy Ace. sound was above averag

  • How to track how long a program method takes to execute?

    So i am writing a radix sort in java and i want to see how long it takes to run. I was wondering how i would get the exact time that a method would take? Calendar cal = new GregorianCalendar();           int ms = cal.get(Calendar.MILLISECOND); I am n

  • Remove GrantSendOnBehalfTo disabled user accounts - A novice at scripting

    Hello.  Can anyone help please In our exchange 2010 environment we have users who are granted send on behalf to access.  Obviously some users leave and I m finding that there are ghosts left behind which are causing issues with our team who add users

  • Connecting lap top to hdtv

    I have a new HDTV with a pc input.  I tried to connect my m105-s3004 satellite to my toshiba 42hl167 tv using the pc input with a vga cable and the tv is displaying " unsupprted video signal.  Is there something extra I need to do to get my lap top t

  • Workflow: XML Container not updated

    Hallo Gurus! I am starting a new workflow with SWW_WI_START_SIMPLE. After that i change some container values with following code: *Workflow starten   CALL FUNCTION 'SWW_WI_START_SIMPLE'     EXPORTING *   CREATOR                            = ' ' *