I recently had some repairs done to my ATT U-verse connection, and now my Safari doesn't open in a full screen. How do I reset that to open in full screen?
I recently had some repairs done to my ATT U-verse connection, and now my Safari doesn't open in a full screen. How do I reset that to open in full screen?
Mountain Lion is set up to close windows when you quit a program instead of saving them. To change this, put Safari in full-screen mode, move the cursor to the top, open Safari menu while holding Option key and close Safari from the menu.
If you want to do it automatically with all programmes, open System Preferences > General, and deactivate "Close windows when quitting an application"
Similar Messages
-
Hi! I have had the Creative Cloud in use before and now I want to start using the programs again. How do I do that?
restart a subscription, https://creative.adobe.com/plans
-
I recently changed my email address for the Apple Id and it was accepted but now when the App store comes up it still shows my old email address and no password will work. iCloud and Facetime are fine. Don't know why it stays there or how to alter it.
1. Sign out of old ID
2. Sign in with new ID
Settings>AppStore>Apple ID -
I am trying to synch things from my mac to my iphone. My Apple screen name is apparently [email protected] but my iphone thinks my screenname is xxxxxx. I can download things on my imac with [email protected] but I am unable to update things on my iphone because it comes up with xxxxxxxx (without the aol.com) asking for my password.
Welcome to the Apple Community.
Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support. -
I purchased Design Standard CS6 the entire package. I downloaded and installed but I was continually having problems with Adobe Acrobat Pro. I tried updating to the newest version but it only made the problems worse (acrobat was super slow and constantly not responding). So i decided to try to uninstall and then reinstall the program. Well I uninstalled, and then attempted to reinstall ONLY the adobe acrobat pro but it says my serial number (which is for design standard) will not work. Since Acrobat Pro is included in the suite, i thought this wouldnt be a problem. Is there anyway to get around this without uninstalling the entire design standard and reinstalling everything? I only need to reinstall acrobat pro.
You need to reinstall Acrobat the the Creative Suite, you cannot download it is a separate application and install it that way because it will be looking for a serial number relative to being a singly purchased application.
-
I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
BobBob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR -
My laptop had some work done on it and now my iTunes library is gone. My Nano 4 has all of my music on it and I want to sync what I have back into my iTune library. Anyone know how?
If you purchased all of the songs through itunes store, please follow these steps:
1. Open up Itunes and Click on Itunes Store
2. Once you're in the Itunes Store look to right side of the screen and you should see the word "purchased". Click purchased and you'll be sent to a purchase screen.
3. Click on "All Songs" and then it will show all the songs you've downloaded. From there you just hit the button that looks like a cloud with an arrow on it, and it will download all the songs all over again.
If you didn't purchase them through Itunes, then you'll have to download software that will strip the songs from your iPod onto your computer. And here is a guide about how to copy iPod music. Hope it helps. Feel free to email me if you need further help. -
I have recently had some music files removed from itunes. This was not supposed to happen! However the originals (consisting largely of playlists) ae still on my ipd and I do not want to do any syncing until I have resolved the issue. Is there any way to restore these missing tunes from the ipod to my itunes? Grateful for any input........
You cannot transfer song files from iPod to computer using iTunes (except for songs purchased from the iTunes Store). However, there are third-party methods and utilities that can transfer song files from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
NOTE: Songs previously purchased from the iTunes Store can also be re-downloaded at no cost, from the iTunes Store Purchased screen. -
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!
You can use some third party software to copy the music from your old iPod back to computer first, and then import the music into iTunes and re-sync them to yournew iPod. Here is a guide about how to transfer iPod music to computer. Hope it helps. Feel free to email me if you need further help.
-
So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.
Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one. Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not there is not enough space for both files files? Do I need to do something to have it continue to update my old file instead of recreating a new one?
Depending on what version of OSX you're running, and how the data was transferred, you may be out of luck.
If you're running Lion, and your backups were made to a directly-connected external HD (ie, not a Time Capsule or other network location), you may be able to get Time Machine to "associate" the new disk with the old backups. See #B6 in Time Machine - Troubleshooting, especially the pink box there.
If you're running Snow Leopard, you might be able to do a full system restore of your backups to the new HD. See Time Machine - Frequently Asked Question #14 for detailed instructions. That should leave a "trail" that Time Machine can follow to "associate" the new drive with the old backups. Unfortunately, that doesn't always work, and there's no way to do it manually, as there is with Lion. -
Hi,
Am new at this. What security is best for my MacBookPro and iMac? I have had some company asking me to join them to 'clean' and get rid of some unused files. Is this ok, the cost if around $40. I don't mind paying but I am a bit worried they might not be approved by Apple.I have had some company asking me to join them to 'clean' and get rid of some unused files.
Does this company know you use Mac OS X? If so this is a worrysome trend.
For a couple of years now there have been several scam artists that call you, claiming to be from 'tech support', or your ISP or even Microsoft, reporting that your machine has been idenfitied as being infected and that you need to give them access to your machine to 'clean it up'. In the process of this 'clean up' they thoroughly hose the system by trashing important files and then demand more money in 'recovery fees' to restore the system.
I've laughed in their face whenever they've called me since they have no clue of how to compromise a Mac system, but if they've started to target Mac users then more vigilence is required.
http://www.informationweek.com/security/management/microsoft-windows-support-cal l-scams-7-f/240005023
Just Google 'microsoft support scam' for more reports/variations. -
I recently upgraded my Macbook Pro to SL OS 10.6.8 and now have pink lines around the desktop borders and some menus. There is also a horrible red colour that appears in the background of photobooth and parts of Safari. The screen saver looks like an alien life form with red in the background. There are odd translucent colours in the background of other applications including MS Office. It looks like a horrible psychedilic trip from the 60's. I ran the upgrade again but nothing changed. Can you help?
Backup your files off the computer (not TimeMachine) and disconnect.
Hold c boot off the 10.6 disk, under the Utilities menu > Disk Utiltiy > Repair Disk, and Repair Permissions
(quit and stop if Disk Repair (only) issues a failure and notify us)
Quit and install 10.6 again, reboot and Software Update again, this time download it and then run it. Check Software Update until clear.
c boot off the 10.6 disk and use Disk Utility >Repair Disk again (fixes a bug)
Reboot and check any installed programs, some may not function who have installed kext files into OS X, those need to be reinstalled.
You didn't mention if you upgraded from 10.5 or 10.6.7, the above steps are for fixing a 10.6 to 10.6.8
If you upgraded from 10.5, you should erase the drive in Disk Utility first, then install 10.6 fresh, but then all your programs will have to be reinstalled or updated from original sources.
Also the 10.6.3 upgrade disk has no free iLife, but you can install 10.5 fresh then upgrade to 10.6.3, then to 10.6.8 and then all new programs and that will give free iLife that came on the factory 10.5 disks.
You also can use Pacifist to extract iLife from 10.5 disks. -
I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?
Firstly iWeb CAN'T IMPORT any kind of published html code as it has no import facility. You can however add html code, javascript and css by selecting the html snippet and placing it on your page the entering the code in here and clicking on Apply. You DO NOT create a shape as you say - you use the html snippet and place your code in there.
There are not really a lot of ways in which you can write code - if you want to enter small amounts of code, then you would use an ordinary text editor to do this such as Text Edit on a Mac or Text Wrangler. If you want to add code to iWeb like this, then you would either use the html snippet method in iWeb itself or you would have to publish the site to a local folder from iWeb and open the relevant html page with a text editor and add the additional code in this way and then publish. However, if he decided to add the code with a text editor, then you would have to upload the pages directly to the server using an ftp client - if you try to upload the site directly from iWeb, all the extra code will be overwritten.
As for checking whether the site was created using iWeb, all you need do is view the site in Safari and then click on View and then select View Source Code and it will tell you.
Even thoough extra code was added to the site and he might well have done this by publishing to a local folder and adding the code with a text editor, he should still have the domain file for the site too.
Ask again. I'm sure that for adding quick code, most would not want to use programmes such as Dreamweaver, but a simple text editor will suffice. As OT already said, if he claims that he does not have the domain.sites file, then try Flux 4 which is a web design programme and has full import facilities. At least this way, if he just gives you the published version of the site, you have some way of opening it.
You can download a free trial of Flux 4 and you can also purchase the full version from the Mac App Store if you decide you like it.
Maybe you are looking for
-
Notes will not Sync in iTunes with iPhone 3.0
I just installed the new 3.0 OS and notes will note sync across. I use the regular Mail application and every time I select the Sync Notes checkbox in iTunes sync setup it does the sync but then deselects the box on its own. Everything else is syncin
-
Open .lvm file while program is running
How do I open a .lvm file within my program? I've tried using the Open/Create/Replace File dialog with File Dialog specifying the path and I can get to the point to select the path, and it doesn't open the file. Solved! Go to Solution.
-
I am using JTable with JScrollPane. JScrollPane is set with the scroll bar policy set to AS-NEEDED. But still when my table columns go beyond the table or View Port Horizontal Scroll bar of the ScrollPane does not appear. I also tried the ALWAYS poli
-
Hi All! I have a requirement to change the packing instruction generated by system to my custom Packing instruction value.Can any body help to find the best possible way to do this. I mean in VL02n Trans while doing automatic packing on a material ha
-
Material master extend automatically
hi, mostly all the material master will be extend for two plants. how can i do it automatically pls advice. thanks