I recently install Lion OS on my iMac and just found out that my Canon 4400F scanner won't work with Lion, what can I do to get it working again?
I am having trouble with some of my previously installed software before installing the New Lion OS. I just found this evening that my Canon 4400F Scanner will no longer work with the new OS. I need to know if there is a solution for this short of buying a new scanner? I am also upset that my Microsoft Office Professional will no longer boot as well. Anyone know why this took place?
If it will not longer work due to Lion, it's most likely becasuse no drivers for Lion have been released. No way to get aroud it other than going back to Snow Leopard. MS Office wont work if it is '04 or earlier becasue it is a PPC application. Mac switched from PPC to Intel in 2006 and created the Rosetta emulator to allow companies to make their software compatable or allow users to buy new software. After 5 years, Rosetta support was dropped, with the release of Lion. No way to get this software to work with Lion.
Similar Messages
-
I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?
If you upgraded and were using a version of Acrobat Reader that was legacy, that is PPC compatible, then you will have to upgrade to a version compatible with Lion as Lion no longer has Rosetta to interface with the legacy software.
I know that Acrobat, full version, 10 works with Lion...use it myself. -
irecently gifter a song to my sister and just found out she didnt get it because she changed her email provider. how do i resend the gift?
If you share an Apple ID, both of your phone numbers should be linked to that ID. You should be able to use your phone number as well. My wife, my daughter and I all share an Apple ID for purchases, and we each text from our iOS devices using our own iPhone numbers.
When iOS 6 came out, you were able to link the phone number with your Apple ID to use for Messages and FaceTime. You will need to sign out of messages on all devices and then start the process all over again.
Take a look at this.
iOS and OS X: Link your phone number and Apple ID for use - Support -
Version:1.0 StartHTML:0000000186 EndHTML:0000002354 StartFragment:0000001670 EndFragment:0000002318 SourceURL:file:///Users/armandodiaz/Desktop/I%20recently%20installed%20MacK.doc
I recently installed MacKeeper on my iMac. It was a disaster. I lost applications and files. Fortunately I had back up. Worst of all it did something to my system software that it takes about 7 minuts to stat-up. What can I do to get it to start-up faster?
ThanksHow to Remove MacKeeper
Given you have a backup you may want to think about erasing the hard drive and reinstalling Snow Leopard then restore your backup. -
A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. I rang Applecare and was told that I need a program called BURN.
Is this correct? I can export the movie from iMovie in a m4v format, but I think I need to convert this to iso format before I can burn the disc.
I know there are programs like TOAST that will do this, but it is expensive.
I would be very grateful for any assistance.Burn will not do what you want, and there is no real substutute for iDVD.
Why is there no iDVD on my new Mac?
Apple insists that the entire world has access to fast broadband (and are prepared to pay for the considerable bandwidth usage) and wants to distribute home movies to friends and relatives via download (iCloud, YouTube, Facebook, whatever) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. Stating that they would return their brand new Mac unless they received a copy of iDVD worked for some, but that is now said to have been withdrawn by Apple.
Also, you can complain bitterly via Apple’s Feedback link, perhaps suggesting that Apple could have provided a choice between burning DVDs and distributing home movies by other means. You may feel that Apple should not dictate how you destribute family videos or photos to distant relatives and friends, and should not assume that every user is prepared to pay for the excessive bandwidth usage charged by ISPs for huge downloads from the App Store:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that came with OS 10.7 Lion (which also omitted iWeb) or that comes with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD 7, i.e. iLife version 9 onwards. You should also do this if you plan to buy a new Mac anytime soon, as stocks of iLife that include iDVD will not be available for ever.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast, which is the best software for burning anything but again does not offer the flexibility of iDVD.
And if you think Microsoft are any better, their new Windows 8 operating system will not play DVDs, or burn them, unless customers buy an extra upgrade, the company has announced: http://www.gizmag.com/windows-8-no-dvd-playback/22443/
In other words, computer manufacturers have declared optical media as dead, long before consumers are ready to stop using them, which is fine as long as they offered us a choice, but they won’t even do that. Flexibility and intuitive use of a computer seems to be a thing of the past. -
I have mac book pro and recently bought mountain lion online, i then used bootcamp to upload windows 7 now i have no sound when i use windows what can i do to get sound.
Install the required Windows drivers: Boot Camp Support Software 5.0.5033. Download this link preferably from Windows. Otherwise, download onto a FAT formatted USB disk from which you can copy to your Windows system.
-
Hi all. I bought an imac 27", 3.1Ghz quad-core i5 Mid 2011 last year in 2012. The machine has been crashing ever so frequently. I upgraded the RAM from the 4Gb it came with to 12Gb. It still crashes! I recently noticed that my imac came with 1067Mhz DDR3 memory chips ( slower speed) than the Apple mac recommended 1333Mhz DDR3 memory chips.
The shop I bought it from ( Incredible Connection, Woodmead, South Africa) are refusing to own up as they are saying the 1333Mhz chips have to be ordered in advance. Surely they are supposed to sell the product with the right kind of Ram in it? Not for me to find out? Now I have to fork out more money to make my imac factory standard? Maybe I am wrong, But do these Mid 2011's run well on 1067Mhz memory chips if I upgrade to 32Gb? Is it possible people are swapping 1333Mhz chips from new machines with 1067Mhz chips which are way too cheaper? My system version( SMC Number) is 1.72f5
Baffled!Mac and Mac models are picky about the RAM the Mac needs to see and use.
As you have found out, the 1067 speed RAM will not work in your year and model iMac.
You need the 1333 speed RAM.
If, you can return the RAM for a refund, do it!
If not, try online Mac RAM source and seller Crucial memory. They have a table that matches your Mac to the correct and reliable RAM. You may need to contact them to see whether or not they ship to South Africa, though.
If Crucial dpesn't work out, here's the specs for your year and model iMac that you need to seek out and purchase.
Maximum Memory
32 GB (Actual) 16 GB (Apple)
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
Good Luck! -
I have just installed mavericks OS.My epson printer does not want to work with it .What can i do?
I HAVE JUST INSTALLED MAVERICKS OS.IT APPEARS IT IS NOT COMPATIBLE WITH MY PRINTER WHICH IS AN EPSON WORKFORCE PRO WP-5630 SERIES 2.What can i do about this problem?
Hello Baldy7,
It sounds like after updating to Mac OS X 10.9 your printer is no longer working with the computer. U want to recommend these steps from the article named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Additional Information
Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB. For more details, see this article.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I need help on restoring my disk capacity back to normal. I installed window 7 into the partition disk through bootcamp and I deleted it from disk utility. After I erase the partition disk,I get my capacity to 499GB but not 750GB. Do I need to reinstall my MacBook or something to do with the restoring?
Welcome to the Apple Support Communities
Rodney Lai wrote:
I installed window 7 into the partition disk through bootcamp and I deleted it from disk utility
You shouldn't do it. You have to erase the Windows volume with Boot Camp Assistant, so it will restore the space onto the OS X volume and that volume will have 750 GB.
As you did it with Disk Utility, you have to resize your OS X partition manually:
1. Open Disk Utility, select your hard disk at the top of the sidebar, and go to Partition tab.
2. You will see a bar with Macintosh HD. You have to click it at the bottom right corner and drag it to the end of the bar, so Macintosh HD will use all the space of the hard drive, and press Apply.
3. Close Disk Utility and your OS X partition will have 750 GB -
In the last couple of days, I received an update of the Free AVG 2012 program for virus protection. Saturday morning when my husband booted up and checked e-mail, he first received an update from Firefox which then alerted him that my computer was now not compatible with AVG, AVG would be turned off; should Firefox search for another compatible program? Having no clue, he clicked NO. When I check the AVG icon in the system tray, it shows AVG2012 up to date and running. The appropriate boxes are checked ok. How do I know what is accurate at this point? Is AVG disabled or not?
Solution: (Free Download Manager)
Go here: http://codecpack.co/download/Free_Download_Manager.html and download Free Download Manager 3.8.1067 Beta 3, it works perfectly with Firefox 5.0.1
Solution: (to Google mail aka Gmail)
I have had this problem for a while since I did a previous Firefox update, where I had to force Gmail to load in Basic HTML else it's next to impossible to use it. The solution is this: simply update your Java, and Gmail will work without a problem using Standard HTML. To update your Java go here: http://www.java.com/en/ and select "Free Java Download".
And beta normally, universally, means "the not quite there yet version of the version we're aiming for" NORMALLY used during production and testing of a type of software. -
It has been a while since I have used it so didn't know until I had the error come up. Same with my laptop.
There is a License Recovery script that uses Terminal.app (just enter that in Spotlight).
It also helps to do this in a admin account or to have your account with Admin privileges.
Now go to this link: Error 150:30, Nothing works. Help plz and carefully follow the instructions in message 5.
Before you enter your password, the screen should look like the example.
Let me know how it goes.
Gene -
I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydasOk... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options. -
I recently purchased an iMac and found out that I can download OSX LIon for free, but have been unable to redeem on the Canadian site. According to their info Canadian systems should be eligible. How do I redeem this on the Canadian site?
Please read and follow the instructions at the Lion - Get up to date site. If you continue to have problems you can contact AppleCare (the number is in your owners manual or you can use the AppleCare Contact Info site.
-
Apple Remote stopped working with Lion on iMac
My white Apple Remote does not work with Lion on my iMac 2.4ghz Core 2 Duo anymore.
I'm sure it was working recently as I was able to control the volume on my RadioShark application. Now that doesn't work anymore and I can't seem to get the remote to work with anything.
I've tried restarting my iMac, swapping the remote's battery, and using another remote but still no success. The only response I get is from the remote's 'Menu' button which, when pressed, toggles between two graphics on screen - one a four-way arrow indicator with a centre button, and the other what appears to be a Forward/Back, Centre button with corner indications for Expand/Shrink.
I've tried the 'Pair' option but pressing 'Menu' and 'Fast Forward' does nothing on screen - no sign of the chain-link 'Paired' symbol. Neither of the white remotes I tried is 'Paired' with the iMac.
It seems I must have done something to cause this but can't think of any change I made that could be responsible. I know Front Row is no longer accessible in Lion, but is there any other app I could test my remote on? Any kind of hardware reset needed? (unlikely, I know, with two separate remotes showing the problem).
Anyone have any ideas?
Thanks.I'm replying to my own question because my remotes are working again.
I'm not sure what I did to fix the issue, but I tried shutting down all open applications (I remembered that by default Lion re-opens with everything as it was). And shortly afterwards I got full functionality back for my Apple Remote.
I'm not sure what caused the issue. I did install Easy Timeline, which I'd downloaded today from the Mac App Store. It has Apple Remote functionality, so I'm not sure if it was in some way implicated. It's working now with my remote, as is iTunes, and RadioShark.
Weird! -
My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?
I get the impression that most of the users on older hardware experiences similar temperature issues on Lion for a long time now. Awaiting for confirmation from the original poster.
In the meantime I'm just cautious with regards to pushing the machine to such extreme temps, since something tells me such behaviour which includes monitor flickering and the likes is nothing but abnormal for any type of use...
Any clues if 10.7.5 does anything on this? If not I'm afraid i see myself going back to SL for good...
Maybe you are looking for
-
JTable - Can I change the color of the text on a row by row basis?
Hi All, I'm redoing a bit of old uni coursework (to model a stockmarket, stock ticker server & stock ticker application) to brush up my Java skills (esp Swing and Event Handling) and am programming the UI by hand using Swing (its the only way to lear
-
Debt collectors chasing me for an account that was...
Hello all, Received a phone call this afternoon from quite an aggressive lady from a company called Advantis and representing a third party called TDX. She was quite cryptic at first and started out by asking me for lots of my personal details. I w
-
Exclamation point and folder and nothing else
Hi... I have an older 20 g iPod. I dropped it (only 3 feet but hard surface) last week and after that it malfunctioned and then stopped functioning. I have tried the reset several times without success. My Mac does not recognize it either in the info
-
Error 10800 when doing Analogue Output with DAQPad-6070E
I'm trying to test out the Analogue Output from my DAQPad 6070E (Firewire). I'm using the Example vi 'Generate N Updates', but get an error: Error 1080 occured at AO Control possible reasons: NI-DAQ LV: The opereation could not complete within the ti
-
[CS3] Method Generate for the object Index fails
Hello, I will create an index in my VB script with InDesign CS3: Set objIndex = docindex.Generate(indIndexDoc.Pages.Item(1),p) The index is longer than one page. I think this is the reason, when I get this error: Runtime error -2147417851 (80010105)